F112AC

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

DATASHEET F-112AC

EL-FLOW Select F-112AC


Digital Thermal Mass Flow Meter for Gases

Gas Mass Flow Meters for medium ow rates

Bronkhorst® model F-112AC Mass Flow Meters (MFMs) are suited for precise measurement of ow ranges between 0,8…40 ln/min and 1,4…250 ln/min
at operating pressures between vacuum and 100 bar. The MFM consists of a thermal mass ow sensor and a microprocessor based pc-board with signal
and eldbus conversion and a PID controller for optional mass ow control by means of a separately mounted control valve.

EL-FLOW® Select series are equipped with a digital pc-board, offering high accuracy, excellent temperature stability and fast response. The main digital
pc-board contains all of the general functions needed for measurement and control. In addition to the standard RS232 output the instruments also
offer analog I/O. As an option, an on-board interface can be mounted to provide CANopen®, DeviceNet™, EtherCAT®, PROFIBUS DP, PROFINET, Modbus
RTU, ASCII or TCP/IP, EtherNet/IP, POWERLINK or FLOW-BUS protocols. The EL-FLOW® Select design features optional Multi Gas / Multi Range
functionality, providing (OEM-) customers with optimal exibility and process efficiency.

Technical speci cations

Measurement / control system

Flow range (intermediate ranges min. 0,8…40 ln/min


available) max. 1,4…250 ln/min
(based on N2)

Accuracy (incl. linearity) (based on ± 0,5 % RD plus ±0,1% FS


actual calibration)

Repeatability < 0,2 % RD

Turndown ratio up to 1:187,5 (1:50 in analog mode)

Multi uid capability storage of max. 8 calibration curves;


optional Multi Gas / Multi Range functionality up to 10 bar abs

Response time (sensor) typical 0,5 sec.

Operating temperature -10 … +70 °C

Temperature sensitivity zero: < 0,05% FS/°C; span: < 0,05% Rd/°C

Pressure sensitivity < 0,1% Rd/bar typical N2; 0,01% Rd/bar typical H2

Leak integrity, outboard tested < 2 x 10-9 mbar l/s He

Attitude sensitivity max. error at 90° off horizontal 0,2% at 1 bar, typical N2

Warm-up time 30 min. for optimum accuracy


2 min. for accuracy ± 2% FS

Mechanical parts
Material (wetted parts) Stainless steel 316L or comparable

Pressure rating (PN) 100 bar abs

Process connections compression type or face seal (VCR/VCO) couplings

Seals standard: Viton®; options: EPDM, Kalrez® (FFKM)

Weight 1,3 kg

Ingress protection IP40

Electrical properties

Power supply +15 … 24 Vdc

Max. power consumption meter Supply at voltage I/O at current I/O extra for eldbus
15 V 95 mA 125 mA <75 mA
24 V 65 mA 85 mA <50 mA

Max. Power consumption Supply at voltage I/O at current I/O extra for eldbus
controller 15 V 290 mA 320 mA <75 mA
24 V 200 mA 215 mA <50 mA

Analog output 0…5 (10) Vdc or 0 (4)…20 mA (sourcing output)

Digital communication standard: RS232;


options: PROFIBUS DP, CANopen®, DeviceNet™, PROFINET, EtherCAT®, Modbus RTU, ASCII or TCP/IP,
EtherNet/IP, POWERLINK, FLOW-BUS

Electrical connection

Analog/RS232 9-pin D-connector (male);

PROFIBUS DP bus: 9-pin D-connector (female);


power: 9-pin D-connector (male);

CANopen® / DeviceNet™ 5-pin M12-connector (male);

FLOW-BUS/Modbus-RTU/ASCII RJ45 modular jack

Modbus TCP / EtherNet/IP / 2 x RJ45 modular jack (in/out);


POWERLINK

EtherCAT®/ PROFINET 2 x RJ45 modular jack (in/out)

Control valve options

External actuator options to be connected to the controller

Certi cation for hazardous areas

Approvals / certi cates

Technical speci cations subject to change without notice.

For dimensional drawings and hook-up diagrams please visit the product page on our website
Recommended accessories

E-8000 SERIES BRIGHT SERIES PIPS SERIES IN-LINE FILTER


MEDIUM FLOW SERIE
Digital Readout / Control Compact Local R/C Module Plug-in Power Supply M-422
Systems Bright, wide angle, 1.8" For lab-style or
Bright, wide angle, 1.8” display industrial devices 1/4" female in / male out
display (TFT technology) User friendly operation Interchangeable plugs 200 bar
User friendly operation, Indication/operation/con guration (Euro, UK, USA,
Average porosity 2...20
menu driven with 4 Australian, IEC) for
µm
push buttons mains connection

Related products

EL-FLOW SELECT F-111AC EL-FLOW SELECT F-202AV EL-FLOW SELECT F-113AC EL-FLOW SELECT F-122M

Min. ow 0,4…20 ln/min Min. ow 0,8…40 ln/min Min. ow 4…200 ln/min Min. ow 0,3…15 ln/min
Max. ow 0,6…100 Max. ow 5…250 ln/min Max. ow 8…1670 Max. ow 5…250 ln/min
ln/min Pressure rating 64 bar ln/min Pressure rating 200 bar
Pressure rating 100 bar Compact design Pressure rating 100 bar Compact design
Compact design High accuracy and Compact design High accuracy
High accuracy repeatability High accuracy

Bronkhorst High-Tech designs and manufactures innovative instruments and subsystems for low- ow measurement and control for
use in laboratories, machinery and industry. Driven by a strong sense of sustainability and with many years of experience, we offer an
extensive range of (mass) ow meters and controllers for gases and liquids, based on thermal, Coriolis and ultrasonic measuring
principles. Our global sales and service network provides local support in more than 40 countries. Discover Bronkhorst®!
www.bronkhorst.com

You might also like