Form-IV

Certificate of Disability LFkku -------------------------- gLrk{kj --------------------------------------

(In cases of other than those mentioned in Forms fnuakd ----------------------- uke ---------------------------------------------
II and III ) in -----------------------------------------------
(Name and Address of the Medical Authority/Board issuing the Certificate) laLFkk dk uke ---------------------------
eqgj --------------------------------------------
Recent passport size uksV % ;g izek.k&i= us'kuy QsMjs'ku@us'kuy ,lksfl,'ku ds lfpo }kjk O;fDrxr :i ls fd;s x;s gLrk{kj
attested photograph gksus ij gh ekU; gksxkA
(showing face only) of izk:i & 2
the person with disabiliy ¼ekU;rk izkIr ØhM+k@[ksy esa vius izns'k dh vksj ls jk"Vªh; izfr;ksfxrk esa Hkkx ysus okys
Certificate No. Date: f[kykM+h ds fy;s½ lEcfU/kr [ksy dh izns'kh; ,lksfl,'ku dk uke -------------------jkT; ljdkj dh
This is to certify that we have carefully examined lsokvksa@inksa ij fu;qfDr ds fy, dq'ky f[kykfM+;ksa ds fy, izek.k&i=
Shri/Smt./Kum.___________son/wife/daughter of Shri _____________ Date of birth izekf.kr fd;k tkrk gS fd Jh@Jherh@dqekjh ------------------------------- vkRet@iRuh@vkRetk Jh -----------------------------------
(DD/MM/ YY) _______age_____ years, male/ female__________Registration No.
--------- fuoklh ¼iwjk irk½ -----------------------------us fnukad----------------ls fnukad------------------------- rd------------------- esa ¼ØhM+k@
__________ permanent resident of House No. ________ Ward/Village/
[ksy&dwn dk uke½ dh izfr;ksfxrk ¼VwukZesUV LFkku dk uke½ -------------------- vk;ksftr jk"Vªh; --------------- esa ¼ØhM+k@
Street________Post Office _______ District ________ State_______,
whose photograph is affixed above, and am satisfied that he/she is a case of Disability. [ksy& dwn dk uke½ dh izfr;ksfxrk@ VwukZesUV esa izns'k dh vksj ls Hkkx fy;kA
His/her extent of percentage physical impairment/disability has been evaluated as per muds Vhe ds }kjk mDr izfr;ksfxrk@VwukZesUV esa ------------------------- LFkku izkIr fd;k x;kA
guidelines (......number and date of issue of the guidelines to be specified) and is shown ;g izek.k&i= ------------------------------------- ¼izns'kh; la?k dk uke½ esa miyC/k fjdkMZ ds vk/kkj ij fn;k x;k gSA
against the relevant disability in the table below:- LFkku -------------------------- gLrk{kj --------------------------------------
fnuakd ----------------------- uke ---------------------------------------------
Permanent physical in ---------------------------------------------
S. Affected part
Disability Diagnosis impairment/mental laLFkk dk uke ---------------------------
N. of body disability (in%) eqgj --------------------------------------------
1. Locomotor disability @ uksV % ;g izek.k&i= izns'kh; [ksy&dwn la?k ds lfpo }kjk O;fDrxr :i ls fd;s x;s gLrk{kj gksus ij gh ekU;
gksxkA
2. Muscular Dystrophy çk:i & 3
3. Leprosy cured ¼ekU;rk izkIr ØhM+k@[ksy esa vius fo'ofo|ky; dh vksj ls vUrfoZ'ofo|ky; izfr;ksfxrk esa Hkkx ysus okys
f[kykM+h ds fy;s½
4. Cerebral Palsy fo'ofo|ky; dk uke -------------------- jkT; Lrj dh lsokvksa@inksa ij fu;qfDr ds fy, dq'ky f[kykfM+;ksa ds fy,
5. Acid attack Victim izek.k&i=
izekf.kr fd;k tkrk gS fd Jh@Jherh@dqekjh -------------------------------------------- vkRet@iRuh@vkRetk Jh ----------------------
------------------------------- fuokl ¼iwjk uke½ --------------------------------------- fo'ofo|ky; dh d{kk ---------------------------- ds fo|kFkhZ us
6. Low Vision # fnukad ----------------------- ls fnukad ----------------------- rd --------------------------- ¼LFkku dk uke½ esa vk;ksftr vUrfoZ'ofo|ky; ----
7. Deaf £ ------------------------ ¼ØhM+k@ [ksy&dwn dk uke½ izfr;ksfxrk@VwukZesUV esa -------------------------- fo'ofo|ky; dh vksj ls Hkkx
fy;kA muds Vhe ds }kjk mDr izfr;ksfxrk@VwukZesUV esa -------------------------------- LFkku izkIr fd;k x;kA ;g izek.k&i=
8. Hard of Hearing £
Mhu vkWQ LiksV~lZ vFkok bapktZ [ksy dwn -----------------fo'ofo|ky; esa miyC/k fjdkMZ ds vk/kkj ij fn;k x;k gSA
9. Speech and Language disability LFkku -------------------------- gLrk{kj --------------------------------------
fnuakd ----------------------- uke ---------------------------------------------
10. Intellectual Disability in ----------------------------------------------
11. Specific Learning Disability
laLFkk dk uke ---------------------------
eqgj --------------------------------------------
12. Autism Spectrum Disorder uksV % ;g izek.k&i= fo'ofo|ky; ds Mhu vkWQ LiksV~lZ ;k bapktZ [ksy&dwn }kjk O;fDrxr :i ls fd;s x;s
13. Mental illness
gLrk{kj gksus ij gh ekU; gksxkA
izk:i & 4
14. Chronic Neurological Conditions ¼ekU;rk izkIr ØhM+k@[ksy esa vius Ldwy dh vksj ls jk"Vªh; [ksy&dwn esa Hkkx ysus okys f[kykM+h
ds fy;s½MkbjsDVªsV vkWQ ifCyd bUlVªD'kUl@funs'kd] f'k{kk] mÙkj izns'k ------------------------------
15. Multiple sclerosis
jkT; Lrj dh lsokvksa@inksa ij fu;qfDr ds fy, dq'ky f[kykfM+;ksa ds fy, izek.k&i=
16. Parkinson's disease izekf.kr fd;k tkrk gS fd Jh@Jherh@dqekjh ------------------------------------- vkRet@iRuh@vkRetk Jh -----------------------------
-------------- fuoklh ¼iwjk irk½ ------------------------------------ esa ----------------------------- Ldwy esa d{kk --------------- ds fo|kFkhZ us fnukad -------
17. Haemophilia
------------ ls fnukad ------------------- rd ------------------¼LFkku dk uke½ esa vk;ksftr Ldwyksa ds us'kuy xsEl dh ------------------------
18. Thalassemia ¼ØhM+k@[ksy&dwn dk uke½ izfr;ksfxrk@VwukZesUV esa --------------------------- Ldwy dh vksj ls Hkkx fy;kA muds Vhe ds
}kjk mDr izfr;ksfxrk@ VwukZesUV esa ------------------------- LFkku izkIr fd;k x;kA
19. Sickle Cell disease
;g izek.k&i= MkbjsDVªsV vkWQ ifCyd bUlVªD'kUl@f'k{kk esa miyC/k fjdkMZ ds vk/kkj ij fn;k x;k gSA
Please strike out the disabilities which is not applicable) LFkku -------------------------- gLrk{kj -------------------------------------
2. The above condition is progressive/non-progressive/ likely to improve/not likely to fnuakd ----------------------- uke ---------------------------------------------
improve. in ----------------------------------------------
3. Reassessment of disability is:- laLFkk dk uke --------------------------
(i) not necessary, eqgj -------------------------------------------
or uksV % ;g izek.k&i= funs'kd@;k vfrfjDr@la;qDr ;k mifuns'kd MkbjsDVªsV vkWQ ifCyd bUlVªD'kUl@f'k{kk
(ii) is recommended/after............years............ months, and therefore this ------------------ }kjk O;fDrxr :i ls gLrk{kj gksus ij ekU; gksxkA
certificate shall be valid till.... ...... ..... (DD) (MM) (YY) Appendix-2
@ e.g. Left/right/both arms/legs m0iz0 lfEefyr jkT; vfHk;a=.k lsok ijh{kk
# e.g. Single eye/both eyes izFke pj.k&izkjfEHkd ijh{kk
£ e.g. Left/Right/both ears ijh{kk&;kstuk
4. Signature and seal of the Medical Authority. iz'ui= & ,d ¼oLrqfu"B izdkjd½
Name and Sealof Member Name and Seal of Member Name and Seal of iz'uksa dh la[;k & 150 ¼lkekU; Kku&25 iz'u] lkekU; fgUnh&25 iz'u ,oa bathfu;fjax ,IVhV~;wM&100 iz'u½
the Chairperson dqy vad & 300 ¼izR;sd iz'u 2 vad½
le;kof/k & 2 ?kaVk
Signature/thumb impression Countersigned by the izkjfEHkd ijh{kk ek= vgZdkjh gksxh ftlesa ek0 vk;ksx }kjk fu/kkZfjr ekud izfr in 15 xquk vH;FkhZ f}rh;
of the person in whose favour Chief Medical Officer pj.k ¼eq[; ijh{kk½ esa lfEefyr gksus gsrq lQy fd;s tk;saxasA bl lEcU/k esa ek0 vk;ksx }kjk le;≤ ij fy;s
certificate of disability is issued (with seal) x;s izfØ;kxr fu.kZ; izHkkoh gksaxsA
mÙkj izns'k yksd lsok ¼'kkjhfjd :Ik ls fodykax] Lora=rk laxzke lsukfu;ksa ds vkfJrksa vkSj HkwriwoZ ikB~;Øe
lSfudksa ds fy;s vkj{k.k½] vf/kfu;e] 1993 ¼;Fkkla'kksf/kr½ ds vuqlkj Lora=rk laxzke lsukuh ds lkekU; Kku% lkekU; Kku ds iz'u&i= lelkef;d ?kVukvksa vkSj ,slh ckrksa dh muds
vkfJr ds izek.k&Ik= dk izi=A oSKkfud igyqvksa ij /;ku nsrs gq, tkudkjh lfEefyr gksxh tks izfrfnu ds vuqHko esa vkrh gS
izek.k&i=
izekf.kr fd;k tkrk gS fd Jh@Jherh ------------------------ fuoklh xzke& --------------- uxj& ------------------- ftyk& ---------------- mÙkj rFkk ftudh fdlh f'kf{kr O;fDr ls vis{kk dh tk ldrh gSA iz'u&i= esa Hkkjr dk bfrgkl]
izns'k yksd lsok ¼'kkjhfjd :Ik ls fodykax] Lora=rk laxzke lsukfu;ksa ds vkfJrksa vkSj HkwriwoZ lSfudksa ds fy;s vkj{k.k½ jktuhfr vkSj Hkwxksy ds ,sls iz'u Hkh lfEefyr gksaxs ftudk mÙkj mEehnokj fo'ks"k v/;;u fd;s
vf/kfu;e] 1993 ds vuqlkj Lora=rk laxzke lsukuh gSa vkSj Jh@Jherh@dqekjh ¼vkfJr½ ----------- iq=@iq=h@ikS= ¼iq= dk iq= fcuk gh ns ldsaxsA
;k iq=h dk iq=½ rFkk ikS=h ¼iq= dh iq=h ;k iq=h dh iq=h½ ¼fookfgr vFkok vfookfgr½ mijkafdr vf/kfu;e] 1993 ¼;Fkkla'kksf/kr½
ds izkfo/kkuksa ds vuqlkj mDr Jh@Jherh ¼Lora=rk laxzke lsukuh½ ----------------ds vkfJr gSaA lkekU; fgUnh& fgUnh dk ikB~;Øe bl izdkj cuk;k tk;sxk rkfd mEehnokj dh fgUnh Hkk"kk
LFkku% gLrk{kj ------------------------------- dh le> vkSj 'kCnksa ds dq'ky iz;ksx dh tk¡p gks ldsA bldk Lrj gkbZ Ldwy dk gksxkA
fnukad% iwjk uke ------------------------------- Engineering Aptitude:-
inuke --------------------------------- 1. General principles of design and drawing
eqgj -------------------------------------- 2. Engineering materials
ftykf/kdkjh ----------------------- 3. Basics of thermodynamics
¼lhy½ ---------------------------------- 4. Water resources and conservation processes
5. Basics of project management
dq'ky f[kykfM+;ksa ds fy;s izek.k&i= tks m-iz- ds ewy fuoklh gSa
'kklukns'k la[;k&22@21@1983&dkfeZd&2 6. Industrial safety and safety standards
fnukad 28 uoEcj] 1985 7. Information and communication technologies (ICT)
izek.k&i= ds QkeZ & 1 ls 4 8. Basics of artificial intelligence and robotics
izk:i &1 9. Types of machinery maintenance
¼ekU;rk izkIr ØhM+k@[ksy esa vius ns'k dh vksj ls vUrjkZ"Vªh; izfr;ksfxrk esa Hkkx ysus okys f[kykM+h ds fy;s½ 10. Green Energy
lEcfU/kr [ksy dh jk"Vªh; QsMjs'ku@jk"Vªh; ,lksfl,'ku dk uke --------------------------- jkT; ljdkj dh lsokvksa@inksa ij 11. Basics of measurement & instrumentation
fu;qfDr ds fy, dq'ky f[kykfM+;ksa ds fy, izek.k&i= 12. Energy conversion principles
izekf.kr fd;k tkrk gS fd Jh@Jherh@dqekjh -------------------------------- vkRet@ iRuh@vkRetk Jh --------------------- 13. Disaster management
fuoklh ---------------------- iwjk irk ----------------- us fnukad --------------- ls fnukad ------------------ rd ------------------------------------ ¼LFkku 14. Ethics and values in engineering profession
15. Quality control
dk uke½ esa vk;ksftr---------------------------------------- ¼ØhM+k@[ksy&dwn dk uke½ dh izfr;ksfxrk@VwukZesUV esa ns'k dh vksj
16. Intellectual property rights
ls Hkkx fy;kA 17. Human health and sanitation
muds Vhe ds }kjk mDr izfr;ksfxrk@VwukZesUV esa ----------------------------- LFkku izkIr fd;k x;kA 18. Handling & storage of products
;g izek.k&i= jk"Vªh; QsMjs'ku@jk"Vªh; ,lksfl,'ku@¼;gk¡ laLFkk dk uke fn;k tk;s½ ------------------ esa miyC/k 19. Climate change
fjdkMZ ds vk/kkj ij fn;k x;k gSA 20. Production & construction

Page-5
21. Recent development in applied sciences flooring, roofing and construction features. Retrofitting of buildings, Principle of planning
22. Role of Science & Technology in daily life of building for residents and specific uses, National Building code provisions and uses.
Basic principles of detailed and approximate estimating, specifications, rate
Appendix-3 analysis, principles of valuation of real property. Machinery for earthwork, concreting
f}rh; pj.k&eq[; ijh{kk dh ;kstuk ,oa ikB~;Øe and their specific uses, factors effecting selection of construction equipments,
lfEefyr jkT; vfHk;U=.k lsok ijh{kk gsrq oLrqfu"B izdkj ds fuEuor~ nks operating cost of equipments. Construction activity, schedules, organizations,
quality assurance principles. Basic principle of network CPM and PERT uses in
iz'u&i= gksaxs%& construction monitoring, cost optimization and resource allocation. Basic principles
izFke iz'u i= of economic analysis and methods. Project profitability: Basis principles of financial
fo"k; iz'uksa dh la[;k vad dqy vad le; planning, simple toll fixation criterions.
PART - D
1& lkekU; fgUnh 25 ¼izR;sd iz'u 3 vad½ 75 GEO TECHNICAL ENGINEERING AND FOUNDATION ENGINEERING
2& eq[; fo"k; ¼flfoy bath0&A] 100 ¼izR;sd iz'u 3 vad½ 300 375 2-30 Types of soils, phase relationships, consistency limits particles size distribution,
eSds0 bath0&A] fo|qr bath0&A] ¼<kbZ½ classifications of soils, structure and clay mineralogy. Capillary water, effective stress and
pore water pressure, Darcy's Law, factors affecting permeability, determination of
d`f"k bath0&A½ ?k.Vk permeability, permeability of stratified soil deposits. Seepage pressure, quick sand
f}rh; iz'u i= condition, compressibility and consolidation, Terzaghi's theory of one dimensional
fo"k; iz'uksa dh la[;k vad dqy vad le; consolidation, consolidation test.
Compaction of soil, field control of compaction total stress and effective stress
1& lkekU; v/;;u 25 ¼izR;sd iz'u 3 vad½ 75 parameters, pore pressure parameters, shear strength of soils, Mohr Coulomb failure
2& eq[; fo"k; ¼flfoy bath0&AA] 100 ¼izR;sd iz'u 3 vad½ 300 375 2-30 theory, shear tests.
eSds0 bath0&AA] fo|qr bath0&AA] ¼<kbZ½ Earth pressure at rest, active and passive pressures, Rankin's theory Coulomb's wedge
theory, Graphical method of earth pressure on retaining wall, sheetpile walls, braced
d`f"k bath0&AA½ ?k.Vk excavation, bearing capacity, Terzaghi and other important theories, net and gross
r`rh; pj.k&O;fDrRo ijh{kk ¼lk{kkRdkj½ & 100 vad bearing pressure.
Immediate and consolidation settlement, stability of slope, total stress and effective stress
dqy ;ksx & 375 + 375 + 100 = 850 vad methods, conventional methods of slices, stability number. Subsurface exploration,
ikB~;Øe methods of boring, sampling, penetration tests, pressure meter tests, essential features of
lkekU; fgUnh& fgUnh dk ikB~;Øe bl izdkj cuk;k tk;sxk rkfd mEehnokj dh fgUnh Hkk"kk foundation, types of foundation, design criteria, choice of type of foundation, stress
dh le> vkSj 'kCnksa ds dq'ky iz;ksx dh tk¡p gks ldsA bldk Lrj gkbZ Ldwy dk gksxkA distribution in soils, Boussinessq's theory, Westergaard method, Newmarks chart,
pressure bulb, contact, pressure, applicability of different bearing capacity theories,
lkekU; v/;;u% lkekU; v/;;u ds iz'u&i= lelkef;d ?kVukvksa vkSj ,slh ckrksa dh muds evaluation of bearing capacity from filed tests, allowable bearing capacity, settlement
oSKkfud igyqvksa ij /;ku nsrs gq, tkudkjh lfEefyr gksxh tks izfrfnu ds vuqHko esa vkrh gS analysis, allowable settlement, proportioning of footing, isolated and combined footings,
rFkk ftudh fdlh f'kf{kr O;fDr ls vis{kk dh tk ldrh gSA iz'u&i= esa Hkkjr dk bfrgkl] rafts, pile foundation, types of piles, plies capacity, static and dynamic analysis, design of
jktuhfr vkSj Hkwxksy ds ,sls iz'u Hkh lfEefyr gksaxs ftudk mÙkj mEehnokj fo'ks"k v/;;u fd;s pile groups, pile load test, settlement of piles lateral loads, foundation. for bridges, Ground
improvement techniques: sand drains, stone columns, grouting, soil stabilization
fcuk gh ns ldsaxsA geotextiles and geomembrane, Machine foundation: Natural frequency, design of
CIVIL ENGINEERING machine foundations based on the recommendation of B.I.S. codes.
PAPER-1 CIVIL ENGINEERING PAPER-II
PART-A Part - A
ENGINEERING MECHANICS, STRENGTH OF MATERIALS AND STRUCTURAL FLUID MECHANICS, OPEN CHANNEL FLOW, HYDRAULIC MACHINES AND
ANALYSIS. HYDROPOWER ENGINEERING.
Units and Dimensions, SI units, vectors, concept of force, Concept of particle and rigid Fluid Mechanics: Fluid properties and their roles in fluid motion, fluid statics including
body concurrent, Non-Concurrent and parallel forces in a plane, moment of force and forces acting on plane and curved surfaces, Kinematics and Dynamics of Fluid flow:
varignon's theorem free body diagram, conditions of equilibrium Principle of virtual work, Velocity and acceleration, stream lines, equation of continuity, irrotational and rotational
equivalent force system. flow, velocity potential and stream functions, flownet, methods of drawing flownet, source
First and second Moment of area, Mass moment of inertia, Static Friction, inclined plane and sink, flow separation, free and forced vorties.
and bearings, kinematics and kinetics, kinematics in Cartesian and Polar Coordinates, Flow control volume equation, continuity, momentum and energy equations, Navier-
motion under uniform and non-uniform acceleration, motion under gravity, Kinetics of Strokes equation, Euler's equation of motion and application to fluid flow problems, pipe
particle: Momentum and Energy principles, D Alembert's principle, Collision of elastic flow, plane, curved, stationary and moving vanes sluice gates, weirs, orifice meters and
bodies, rotation of rigid, bodies, simple harmonic motion. Venturi meters.
STRENGTH OF MATERIALS: Dimensional Analysis and Similitude: Buckingham's Pi-theorem, dimensionless
Simple Stress and Strain, Elastic constants, axially loaded compression members, Shear parameters, similitude theory, model laws, undistorted and distorted models.
force and bending moment, theory of simple bending, bending stress, Shear Stress, Laminar Flow: Laminar flow between parallel, stationary and moving plates, flow through
beams of uniform strength, Leaf Spring, close coiled helical springs, Strain Energy in pipes.
direct Stress, bending & Shear. Deflection of beams; Macaulay's method, Mohr's Moment Boundary Layer: Laminar and turbulent boundary layer on a flat plate, laminar sub-layer,
area method, Conjugate beam method, unit load method, Torsion of Shafts, Transmission smooth and rough boundaries, submerged flow, drag and lift and its applications.
of power, Elastic stability of columns, Euler's Rankin's and Secant formulae. Principal Turbulent flow through pipes: Characteristics of turbulent flow, velocity distribution, pipe
stresses and strains in two dimensions, Mohr's Circle, Theories of Elastic Failure, Thin friction factor, hydraulic grade line and total energy line, siphons, expansion and
and Thick cylinder, Stresses due to internal and external pressure-Lame's equations. contractions in pipes pipe networks, water hammer in pipes and surge tanks.
STRUCTURAL ANALYSIS: Castiglianios theorems I and II, Unit load method of Open Channel Flow: Flow types, uniform and nonuniform flows, momentum and energy
consistent deformation applied to beams and pin jointed trusses. Slope-deflection, correction factors, Specific energy and specific force, critical depth, resistance equations
moment distribution, Kani's method of analysis and column Analogy method applied to and roughness coefficient, rapidly varied flow, flow in transitions, Brink flow, Hydraulic
indeterminate beams and rigid frames. Rolling loads, and influence lines: Influence lines jump and its applications, waves and surges, gradually varied flow, classification of
for reactions of beam, shear force and bending moment at a section of beam. Criteria for surface profiles, control section, Integration of varied flow equation and their solution.
maximum shear force and bending moment in beams traversed by a system of moving HYDRAULIC MACHINES AND HYDROPOWER:
loads, influence lines for simply supported plane pin jointed trusses, Arches: Three Centrifugal pumps-Types, characteristics, Net Positive Suction-head (NPSH), specific
hinged, two hinged and fixed arches, rib shortening and temperature effects, influence speed, Pumps in series and parallel. Reciprocating pumps, Air vessels, Hydraulic ram,
lines in arches, Matrix methods of analysis: Force method and displacement method of efficiency parameters, Rotary and positive displacement pumps, diaphragm and jet pumps.
analysis of indeterminate beams and rigid frames. Plastic Analysis of beams and frames: Hydraulic turbines: types, classification, Choice of turbines, performance parameters,
Theory of plastic bending, plastic analysis, statical method, Mechanism method. controls, characteristics, specific speed. Principles of hydropower development: Types, layouts
Unsymmetrical bending: Moment of inertia, product of inertia, position of neutral axis and and component works, surge tanks, 'types and choice, Flow duration curves and dependable
principal axis, calculation of bending stresses. flow, Storage and pondage, Pumped storage plants, Special types of hydel plants.
PART-B Part - B
DESIGN OF STRUCTURES: STEEL, CONCRETE AND MASONRY STRUCTURES. Hydrology and Water Resources Engineering
STRUCTURAL STEEL DESIGN: Hydrology: Hydrologic cycle, precipitation, evaporation, transpiration, infiltration,
Structural steel: Factors of safety and load factors, rivetted, bolted and welded joints and overland flow, hydrographs, flood frequency analysis, flood routing through a reservoir,
its connections, Design by working, stress/limit state method of tension and compression channel flow routing- Muskingam method.
member, beams of built up section, rivetted and welded plate girders, gantry girders, stancheons Ground Water flow: Specific yield, storage coefficient, coefficient of permeability,
with battens and lacings, slab and gussetted column bases, Design of highway and confined and unconfined aquifers, radial flow into a well under confined and unconfined
railway bridges: Through and deck type plate girder, Warren girder, Pratt truss. conditions, Open wells and tube wells. Ground and surface water recourses single and
DESIGN OF CONCRETE AND MASONRY STRUCTURES: multipurpose projects, storage capacity of reservoirs, reservoir losses, reservoir
Reinforced Concrete: Working Stress and Limit State Method of design-Recommendations sedimentation. Water requirements of crops consumptive use, duty and delta, irrigation
of B.I.S. codes, design of one way and two way slabs, stairs-case slabs, simple and methods, Irrigation efficiencies.
continuous beams of rectangular, T and L sections, compression members under direct Canals: Distribution systems for canal irrigation, canal capacity, canal losses, alignment
load with or without eccentricity, isolated and combined footings, Cantilever and counter- of main and distributory canals, Design of canal by kennedy's and Lacey's thoeory, Water
fort type retaining walls, Water tanks: Design requirements as per B.I.S. code for logging and its prevention.
rectangular and circular tanks resting on ground, Prestressed concrete: Methods and Diversion head works: Components, Principles and design of weirs on permeable and
systems of prestressing, anchorages, analysis and design of sections for flexure based on impermeable foundations, Khosla's theory, Bligh's creep theory Storage works. Cross
working stress, losses of prestress, Earthquake resistant design of building as per BIS drainage works.
code. Design of brick masonry as per I. S. Codes, Design of masonry retaining walls. Types of dams, design principles of gravity and earth dams, stability analysis. Spillways:
PART - C Spillway types energy dissipation.
Building Materials, Construction Technology, Planning and Management Building River training: Objectives of river training, methods of river training and bank protection.
Materials: Physical properties of construction materials with respect to their use: stones Part-C
bricks, tiles, lime, glass, cement, mortars, Concrete, concept of mix design, pozzolans, Transportation Engineering
plasticizers, super plasticizers, Special concrete: roller compacted concrete, mass Highway Engineering: Principles of Highway alignments, classification and geometric
concrete, self compacting concrete, ferro cement, fibre reinforced concrete, high strength design, elements and standards for roads.
concrete, high performance concrete, Timber: properties, defects and common Pavement: flexible and rigid pavements Design principles and methodology Construction
preservation treatments, Use and selection of materials for various uses e.g. Low cost methods and materials for stabilized soil. WBM, Bituminous works and Cement Concrete roads.
housing, mass housing, high rise buildings. Surface and sub-surface drainage arrangements for roads, culvert structures. Pavement
Constructions Technology, Planning and Management: distresses and strengthening by overlays.
Masonry constructions using brick, stone, construction detailing and strength Traffic surveys and their application in traffic planning, Typical design features for
characteristics paints, varnishes, plastics, water proofing and damp proofing materials. channelized, intersection, rotary etc., signal designs, standard traffic signs and markings.
Detailing of walls, floors, roofs, staircases, doors and windows. Plastering, pointing, Railway Engineering: Permanent way, ballast, sleeper, chair and faslenings, points,

Page-6
crossings, different types of turn outs, cross-over, setting out of points, Maintenance of ELECTRICAL ENGINEERING
track, super elevation, creep of rails ruling gradients, track resistance tractive effort, curve PAPER - I
resistance, Station yards and station buildings, platform sidings, turn outs, Signals and Networks and Systems: Steady-state and Transient-state Analysis of systems
interlocking, level crossings. Thevenin's-, Norton's-, Superposition- and Maximum Power Transfer-theorems, Driving point
Air port Engineering: Layouts, Planning and design. Transfer functions, Two-port networks, Laplace and Fourier transforms and their applications
Part - D in Network analysis, Z-transforms for discrete systems, R-L, R-C & L-C network synthesis.
Environmental Engineering E.M. Theory: Analysis of electrostatic and magnetostatic fields, Laplace, Poission and
Water supply: Estimation of water demand, impurities in water and their significance, Maxwell equations, solution of boundary value problems, electromagnetic wave
physical, chemical and bacteriological parameters and their analysis, waterborne propagation, ground and space waves, Propagation between Earth Station and Satellites.
diseases, standards for potable water. Control systems: Mathematical modelling of dynamic linear continuous systems, Block
Water collection & treatment: Intake structures, principles and design of sedimentation diagrams and Signal flow graphs, time-response specifications, steady-state error,
tank, coagulation cum flocculation units slow sand filter, rapid sand filter and pressure Routh- Hurwitz criterion, Nyquist techniques, Root Loci, Bode Plots, Polar Plot, and
filter, theory & practices of chlorination, water softening, removal of taste and salinity, stability analysis, Lag-, Lead-, Lag-Lead-compensation, state-space modelling, state
Sewerage Systems, Domestic and industrial wastes, storm, sewage, separate and transition matrix, controllability and observability.
combined systems, flow through sewers, design of sewers. Elements of Electronics: Basics of semiconductor diodes, BJT, FET and their
Waste water characterization: Solids, Dissolved oxygen (DO), BOD COD, TOC, and chracteristics, different types of transistors and FET amplifiers equivalent circuits and
Nitrogen, Standards for disposal of effluent in normal water course and on to land. frequency response, feedback oscillators, colpitts oscillator and Hartley Oscillator,
Waste water treatment: Principles and design of wastewater Treatment units-, Screening, Operational amplifiers-chracteristics and applications.
grit chamber, sedimentation tank activated sludge process, trickling filters, oxidation Power System Analysis and Design: Line parameters and calculations, Performance of
ditches, oxidation ponds, septic tank; Treatment and disposal of sludge; recycling of Transmission lines. Mechanical design of overhead lines and Insulators, Corona and
waste water. radio interference Parameters of single- and three-core Cables, Bus admittance matrix,
Solid waste management: Classification, Collection and disposal of solid waste in rural Load flow equations and methods of solutions, Fast-decoupled load flow, Balance- and
and urban areas, Principles of solid waste management. Unbalanced-faults analysis, Power system stability, Power system transients and
Environmental pollution: Air and water pollution and their control acts. Radioactive travailing Waves, EHV Transmission, HVDC transmission, Concepts of FACTS, Voltage
waste and their disposal Environmental impact assessment of Thermal power Plants, Control and Economic operation, Concepts of distributed generation, solar and wind
mines and river valley projects, Sustainable development. power, smart grid concepts.
Part-E Elements of Electrical Machines:- General concepts of E.m.f., m.m.f., and torque in
Survey and Engineering Geology rotating machines, DC Machines: motor and generator characteristics, equivalent
(a) Surveying: Common methods and instruments for distance and angle measurements circuits, commutation and amature reaction, starting and speed controls of motors;
in Civil Engineering works, their use in plane table traverse survey, levelling, triangulation, Synchronous Machines: performance, regulation, Parallel operation of generators, motor
contouring and topographical maps. Survey layouts for culverts canal, bridge, roads, starting, characteristics and applications, Transformers: phasor-diagram and equivalent
railway alignment and buildings. circuit, efficiency, and voltage regulation, auto-transformers, 3-phase transformers.
Basic principles of photogrammetry and remote sensing. Measurement:- Basic methods of measurement, Precision and standards, error analysis,
Introduction to Geographical information system. Bridges and Poteniometers; moving coil, Moving iron, dynamometer and induction type
Engineering Geology instruments, measurement of voltage, current, power, energy, and power factor
Basic concepts of Engineering geology and its applications in projects such as dams, Instrument transformers, digital voltmeters and multimeters, phase-, time- and frequency
bridges and tunnels. measurement. Q-meters Oscilloscopes, Basics of sensors, and data acquisition system,
MECHANICAL ENGINEERING Instrumentation systems for pressure and temperature measurements.
PAPER-I ELECTRICAL ENGINEERING
1. Engineering Mechanics: PAPER - II
Analysis of force systems, friction, cendtroid and centre of gravity, trusses and beams Power Electronics and Drives: Semiconductor, power,. diodes, transistors, thyristors
principle of virtual work, kinematics and kinetics of particle, kinematics and kinetics of rigid triacs, GTOS, MOSFETS and IGBTS static characteristics and principles of operation,
bodies. triggering circuits single phase and threephase controlled rectifiers-fully controlled and
2. Mechanism and Machines: half controlled, smoothing and filters regulated power supplies, DC-DC choppers and
Velocity and acceleration of links, cams and followers gears and gear trains clutches, belt Inverters, speed control circuits for DC and A.C. drives, Basics of electric drives: types,
drives, brakes and dynamometers, Flywheel and governors, balancing of rotating and quadrant operation, reversing and braking of electric motors, estimation of power ratings,
reciprocating masses, balancing of multi cylinder engines, Free and forced vibration traction motors.
damped vibration, whirling of shafts. Digital Electronics: Boolean algebra, logic gates, combinational and sequential logic
3. Mechanics of Solids: circuits, multiplexers, muiltivibrators, sample and hold circuits, A/D and D/A converters,
Stresses and strains, compound stresses strains, Torsion of circular shafts, stresses and basics of filter circuits and applications, active filters, semiconductor memories.
deflections in beams unsymmetrical bending, curved beams, Thin and thick cylinders and Microwaves and Communication systems: Electromagnetic wave in guided media,
spheres, Buckling of columns, Energy methods, helical and leaf springs. wave guide components, resonators, microwave tubes, microwave generators and amplifiers.
4. Design of Machine Elements: Analog Communication basics: modulation and demodulation, noise and bandwidth,
Design for Static and dynamic loading, Theories of failure, fatigue principles of design of transmitters and receivers, signal to noise ratio, digital communication basics, sampling
rivetted, welded and bolted joints, shafts, springs, bearings, brakes, clutches and flywheels. quantizing, coding frequency- and time-domain multiplexing, sound and vision broadcast
5. Engineering Materials: antennas, transmission lines at audio and ultra-high frequencies.
Crystal systems and crystallography, crystal imperfections,Alloys and phase diagrams, Heat Induction and special Machines: Three-phase Induction motors Rotating magnetic
treatment, ferrous and non ferrous metals and alloys, Mechanical properties and testing. field, Torque-slip characterstics, Equivalent Circuit and determination of its parameters,
6. Manufacturing: Metal casting, metal forming, metal joining, Mechanics of metal starters, speed control, Induction generators. Single phase Induction motors: Theory and
cutting, machining and machine tool operations, unconventional machining methods phasor diagrams, characteristics, starting and applications, repulsion motor, series motor:
limits, fits and tolerances, inspection: Surface roughness, comparators, computer E.m.f. equation and phasor diagram and performance, servomotors, stepper motors,
integrated manufacturing, Flexible manufacturing systems, jigs and fixtures reluctance motors, brushless DC motors (BLDC).
7. Industrial Engineering: Power system protection and Switch gear: Methods of Arc Extinction, Restriking
Production, planning and control, inventory control and operation, research, CPM and PERT. voltages and recovery voltage, testing of circuit breakers, Protective relays, protective
8. Mechatronics and Robotics: schemes for power system equipment, surges in transmission line and protection.
Microprocessors and microcontrollers, Architecture, Programming, Computer interfacing Numerical Methods: Solution of non liner algebraic equations, single and multisteps
Programmable logic controller, sensors and actuators, Piezoelectric accelerometers, Hall methods for solution of differential equations.
effect sensors, optical encoder, resolver, Inductosyn, Pneumatic and Hydraulic Actuators, Electrical Engineering Materials: Crystal structure and defects, conducting, insulating
stepper motor, control system, mathematical modeling, control signals, controllability and and magneting Materials, super-conductors.
observability, Robotics: Robot classification, robot specification. Notation: Direct and Elements of Microprocessors: Data representation and representation of integer and
inverse kinematics homogeneous co-ordinates and arm equation of four axix SCARARobot. floating point-numbers. Organization and programming of a microprocessor, ROM and
MECHANICAL ENGINEERING RAM memories CPU of a microcomputer, interfacing memory and I/O devices
PAPER-II Programmable peripheral and communication interface. Application of microprocessors.
1. Thermodynamics: AGRICULTURAL ENGINEERING
Thermodynamic systems and processes, properties of pure substances, concepts and PAPER-I
applications of zeroth, first and second law of thermodynamics, entropy, availability and (a) Thermodynamics and Heat Engines: Concept of energy, temperature and heat
irreversibility, detailed analysis of thermodynamic cycles, ideal and real gases, fuels and equations; laws of thermodynamics, pure substances and their properties; entropy
combustion. Rankine, air standard Otto, Diesel and Joule cycles; indicator diagrams.
2. Fluid Mechanics: (b) Farm Power: Sources and status of power in India; farm power and agricultural
Basic concepts and properties of fluids, manometry, fluid statics, buoyancy equations of productivity relationship; construction and operational features of IC engines, various,
motion, Bernoulli's equation and applications, viscous flow of incompressible fluids, system of IC engine namely carburetion, ignition, cooling, lubrication; valves and valve
laminar and turbulent flows, flow through pipes and head losses in pipes, dimensional timing, special features of diesel engines, tractors and their classification, power
analysis, Forces on immersed bodies and boundary layer over a flat plate, isentropic and transmission, repair and maintenance; tractor testing, and tractor economics; power tillers
adiabatic flows, normal shock waves. -their economics and suitability, Energy in Agriculture.
3. Heat Transfer: (c) Farm Machinery: Design, construction, operation, repair and maintenance of tillage
Modes of heat transfer, steady and unsteady heat conduction, thermocouple time tools, implements and equipment viz. mould board and disk plough; harrows, cultivators,
constant, critical thickness of insulation, heat transfer from fins, momentum and energy rotary tiller, seeding and planting machines, hoe, weeders, sprayers and dusters;
equations for boundary layer flow on a flat plate. Free and forced convection, radiation harvester, threshers and combines; soil and crop factors influencing machine
heat transfer, Stefan-Boltzmann law, shape factor, black and grey body radiation heat performance and energy requirements; selection of farm machines, economics of
exchange, boiling and condensation, heat exchanger analysis, LMTD and NTU - agricultural mechanization. Earth moving machineries.
effectiveness methods. (d) Heat and Mass Transfer: Thermal properties of materials; steady state and transient
4. Energy conversion: heat conduction, natural and forced convection; boiling, condensation, thermal radiation
SI and CI engines, performance characteristics and testing of IC engines, combustion exchange, Heat exchangers, heat and mass transfer analogy; Fick's laws of diffusion,
phenomena in SI and CI engines, carburetion and fuel injection systems, emissions and psychrometrics; analysis of heat and mass transfer processes, instrument and
emission control. Reciprocating and rotary pumps, pelton wheel, Francis and Kaplan measurement systems.
turbines, velocity diagrams impulse and reaction principles steam and gas turbines;
(e) Process and Food Engineering: Unit operations in post harvest processing
Rankine and Brayton cycles with regeneration and reheat, high pressure boilers, draft,
(cleaning, grading, drying, size reduction, evaporation, pasteurization, distillation etc.);
condensers. Unconventional power systems, including nuclear, MHD, biomass, wind and
processing of cereals, pulses, oilseeds, fruits & vegetables, animal feed, spices, dairy
tidal systems, utilization of solar energy; Reciprocating and rotary compressors; theory
products, meat etc.; design of processing equipment and systems, milking machines.
and applications, Theory of propulsions, pulsejet and ramjet engines.
5. Environmental control: (f) Storage and handling: Changes in stored products during storage; storage of food
Vapour compression, vapour absorption, steam jet and air refrigeration systems properties of grains and their products, perishables (vegetable, fruits, dairy product, meat and eggs)
refrigerant and their nomenclature, psychometrics properties and processes psychrometic storage system- air tight ventilated, refrigerated, modified atmospheric and controlled
relations, use of pschrometic chart, load estimation, supply air conditions sensible heat atmospheric storages; packaging; conveyors; design and management of storage and
factors, air conditioning system layout, comfort chart, comfort and industrial air conditioning. handling systems. Reducing losses in storages and handling.

Page-7