10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

Security Advisory: Critical OpenSSL Vulnerability - learn how (https://www.docker.com/blog/security-advisory-critical-openssl- ✕

vulnerability/) to tell if your repository is vulnerable.

Best practices for writing Dockerfiles

Estimated reading time: 33 minutes

This document covers recommended best practices and methods for building efficient images.

Docker builds images automatically by reading the instructions from a Dockerfile -- a text file that contains all
commands, in order, needed to build a given image. A Dockerfile adheres to a specific format and set of instructions
which you can find at Dockerfile reference (/engine/reference/builder/).

A Docker image consists of read-only layers each of which represents a Dockerfile instruction. The layers are stacked and
each one is a delta of the changes from the previous layer. Consider this Dockerfile :

Give feedback
# syntax=docker/dockerfile:1
FROM ubuntu:18.04
COPY . /app
RUN make /app
CMD python /app/app.py

Each instruction creates one layer:

FROM creates a layer from the ubuntu:18.04 Docker image.

COPY adds files from your Docker client’s current directory.
RUN builds your application with make .
CMD specifies what command to run within the container.

When you run an image and generate a container, you add a new writable layer (the “container layer”) on top of the
underlying layers. All changes made to the running container, such as writing new files, modifying existing files, and
deleting files, are written to this writable container layer.

For more on image layers (and how Docker builds and stores images), see About storage drivers (/storage/storagedriver/).

General guidelines and recommendations

Create ephemeral containers

The image defined by your Dockerfile should generate containers that are as ephemeral as possible. By “ephemeral”,
we mean that the container can be stopped and destroyed, then rebuilt and replaced with an absolute minimum set up
and configuration.

Refer to Processes (https://12factor.net/processes) under The Twelve-factor App methodology to get a feel for the
motivations of running containers in such a stateless fashion.

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 1/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

Understand build context

When you issue a docker build command, the current working directory is called the build context. By default, the
Dockerfile is assumed to be located here, but you can specify a different location with the file flag ( -f ). Regardless of
where the Dockerfile actually lives, all recursive contents of files and directories in the current directory are sent to the
Docker daemon as the build context.

 Build context example

Create a directory for the build context and cd into it. Write “hello” into a text file named hello and create a
Dockerfile that runs cat on it. Build the image from within the build context ( . ):

$ mkdir myproject && cd myproject

$ echo "hello" > hello
$ echo -e "FROM busybox\nCOPY /hello /\nRUN cat /hello" > Dockerfile
$ docker build -t helloapp:v1 .

Move Dockerfile and hello into separate directories and build a second version of the image (without relying
on cache from the last build). Use -f to point to the Dockerfile and specify the directory of the build context:

Give feedback
$ mkdir -p dockerfiles context
$ mv Dockerfile dockerfiles && mv hello context
$ docker build --no-cache -t helloapp:v2 -f dockerfiles/Dockerfile context

Inadvertently including files that are not necessary for building an image results in a larger build context and larger image
size. This can increase the time to build the image, time to pull and push it, and the container runtime size. To see how big
your build context is, look for a message like this when building your Dockerfile :

Sending build context to Docker daemon 187.8MB

Pipe Dockerfile through stdin

Docker has the ability to build images by piping Dockerfile through stdin with a local or remote build context. Piping
a Dockerfile through stdin can be useful to perform one-off builds without writing a Dockerfile to disk, or in
situations where the Dockerfile is generated, and should not persist afterwards.

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 2/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

 The examples in this section use here documents (https://tldp.org/LDP/abs/html/here-docs.html) for convenience,
but any method to provide the Dockerfile on stdin can be used.

For example, the following commands are equivalent:

echo -e 'FROM busybox\nRUN echo "hello world"' | docker build -

docker build -<<EOF

FROM busybox
RUN echo "hello world"
EOF

You can substitute the examples with your preferred approach, or the approach that best fits your use-case.

Build an image using a Dockerfile from stdin, without sending build context
Use this syntax to build an image using a Dockerfile from stdin , without sending additional files as build context. The

Give feedback
hyphen ( - ) takes the position of the PATH , and instructs Docker to read the build context (which only contains a
Dockerfile ) from stdin instead of a directory:

docker build [OPTIONS] -

The following example builds an image using a Dockerfile that is passed through stdin . No files are sent as build
context to the daemon.

docker build -t myimage:latest -<<EOF

FROM busybox
RUN echo "hello world"
EOF

Omitting the build context can be useful in situations where your Dockerfile does not require files to be copied into the
image, and improves the build-speed, as no files are sent to the daemon.

If you want to improve the build-speed by excluding some files from the build- context, refer to exclude with .dockerignore.

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 3/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

 Note: Attempting to build a Dockerfile that uses COPY or ADD will fail if this syntax is used. The following
example illustrates this:

# create a directory to work in

mkdir example
cd example

# create an example file

touch somefile.txt

docker build -t myimage:latest -<<EOF

FROM busybox
COPY somefile.txt ./
RUN cat /somefile.txt
EOF

# observe that the build fails

...
Step 2/3 : COPY somefile.txt ./
COPY failed: stat /var/lib/docker/tmp/docker-builder249218248/somefile.txt: no such file or dir

Give feedback
Build from a local build context, using a Dockerfile from stdin
Use this syntax to build an image using files on your local filesystem, but using a Dockerfile from stdin . The syntax
uses the -f (or --file ) option to specify the Dockerfile to use, using a hyphen ( - ) as filename to instruct Docker
to read the Dockerfile from stdin :

docker build [OPTIONS] -f- PATH

The example below uses the current directory ( . ) as the build context, and builds an image using a Dockerfile that is
passed through stdin using a here document (https://tldp.org/LDP/abs/html/here-docs.html).

# create a directory to work in

mkdir example
cd example

# create an example file

touch somefile.txt

# build an image using the current directory as context, and a Dockerfile passed through stdin
docker build -t myimage:latest -f- . <<EOF
FROM busybox
COPY somefile.txt ./
RUN cat /somefile.txt
EOF

Build from a remote build context, using a Dockerfile from stdin

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 4/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

Use this syntax to build an image using files from a remote git repository, using a Dockerfile from stdin . The
syntax uses the -f (or --file ) option to specify the Dockerfile to use, using a hyphen ( - ) as filename to instruct
Docker to read the Dockerfile from stdin :

docker build [OPTIONS] -f- PATH

This syntax can be useful in situations where you want to build an image from a repository that does not contain a
Dockerfile , or if you want to build with a custom Dockerfile , without maintaining your own fork of the repository.

The example below builds an image using a Dockerfile from stdin , and adds the hello.c file from the “hello-world”
Git repository on GitHub (https://github.com/docker-library/hello-world).

docker build -t myimage:latest -f- https://github.com/docker-library/hello-world.git <<EOF

FROM busybox
COPY hello.c ./
EOF

Give feedback
 Under the hood

When building an image using a remote Git repository as build context, Docker performs a git clone of the
repository on the local machine, and sends those files as build context to the daemon. This feature requires git to
be installed on the host where you run the docker build command.

Exclude with .dockerignore

To exclude files not relevant to the build (without restructuring your source repository) use a .dockerignore file. This file
supports exclusion patterns similar to .gitignore files. For information on creating one, see the .dockerignore file
(/engine/reference/builder/#dockerignore-file).

Use multi-stage builds

Multi-stage builds (/build/building/multi-stage/) allow you to drastically reduce the size of your final image, without
struggling to reduce the number of intermediate layers and files.

Because an image is built during the final stage of the build process, you can minimize image layers by leveraging build
cache.

For example, if your build contains several layers, you can order them from the less frequently changed (to ensure the build
cache is reusable) to the more frequently changed:

Install tools you need to build your application

Install or update library dependencies

Generate your application

A Dockerfile for a Go application could look like:

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 5/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

# syntax=docker/dockerfile:1
FROM golang:1.16-alpine AS build

# Install tools required for project

# Run `docker build --no-cache .` to update dependencies
RUN apk add --no-cache git
RUN go get github.com/golang/dep/cmd/dep

# List project dependencies with Gopkg.toml and Gopkg.lock

# These layers are only re-built when Gopkg files are updated
COPY Gopkg.lock Gopkg.toml /go/src/project/
WORKDIR /go/src/project/
# Install library dependencies
RUN dep ensure -vendor-only

# Copy the entire project and build it

# This layer is rebuilt when a file changes in the project directory
COPY . /go/src/project/
RUN go build -o /bin/project

# This results in a single layer image

FROM scratch
COPY --from=build /bin/project /bin/project

Give feedback
ENTRYPOINT ["/bin/project"]
CMD ["--help"]

Don’t install unnecessary packages

To reduce complexity, dependencies, file sizes, and build times, avoid installing extra or unnecessary packages just because
they might be “nice to have.” For example, you don’t need to include a text editor in a database image.

Decouple applications
Each container should have only one concern. Decoupling applications into multiple containers makes it easier to scale
horizontally and reuse containers. For instance, a web application stack might consist of three separate containers, each
with its own unique image, to manage the web application, database, and an in-memory cache in a decoupled manner.

Limiting each container to one process is a good rule of thumb, but it is not a hard and fast rule. For example, not only can
containers be spawned with an init process (/engine/reference/run/#specify-an-init-process), some programs might spawn
additional processes of their own accord. For instance, Celery (https://docs.celeryproject.org/) can spawn multiple worker
processes, and Apache (https://httpd.apache.org/) can create one process per request.

Use your best judgment to keep containers as clean and modular as possible. If containers depend on each other, you can
use Docker container networks (/network/) to ensure that these containers can communicate.

Minimize the number of layers

In older versions of Docker, it was important that you minimized the number of layers in your images to ensure they were
performant. The following features were added to reduce this limitation:

Only the instructions RUN , COPY , ADD create layers. Other instructions create temporary intermediate images, and
do not increase the size of the build.

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 6/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

Where possible, use multi-stage builds (/build/building/multi-stage/), and only copy the artifacts you need into the final
image. This allows you to include tools and debug information in your intermediate build stages without increasing the
size of the final image.

Sort multi-line arguments

Whenever possible, ease later changes by sorting multi-line arguments alphanumerically. This helps to avoid duplication of
packages and make the list much easier to update. This also makes PRs a lot easier to read and review. Adding a space
before a backslash ( \ ) helps as well.

Here’s an example from the buildpack-deps image (https://github.com/docker-library/buildpack-deps):

RUN apt-get update && apt-get install -y \

bzr \
cvs \
git \
mercurial \
subversion \
&& rm -rf /var/lib/apt/lists/*

Give feedback
Leverage build cache
When building an image, Docker steps through the instructions in your Dockerfile , executing each in the order specified.
As each instruction is examined, Docker looks for an existing image in its cache that it can reuse, rather than creating a new
(duplicate) image.

If you do not want to use the cache at all, you can use the --no-cache=true option on the docker build command.
However, if you do let Docker use its cache, it is important to understand when it can, and cannot, find a matching image.
The basic rules that Docker follows are outlined below:

Starting with a parent image that is already in the cache, the next instruction is compared against all child images
derived from that base image to see if one of them was built using the exact same instruction. If not, the cache is
invalidated.

In most cases, simply comparing the instruction in the Dockerfile with one of the child images is sufficient. However,
certain instructions require more examination and explanation.

For the ADD and COPY instructions, the contents of the file(s) in the image are examined and a checksum is
calculated for each file. The last-modified and last-accessed times of the file(s) are not considered in these checksums.
During the cache lookup, the checksum is compared against the checksum in the existing images. If anything has
changed in the file(s), such as the contents and metadata, then the cache is invalidated.

Aside from the ADD and COPY commands, cache checking does not look at the files in the container to determine a
cache match. For example, when processing a RUN apt-get -y update command the files updated in the container
are not examined to determine if a cache hit exists. In that case just the command string itself is used to find a match.

Once the cache is invalidated, all subsequent Dockerfile commands generate new images and the cache is not used.

Dockerfile instructions
These recommendations are designed to help you create an efficient and maintainable Dockerfile .

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 7/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

FROM
Dockerfile reference for the FROM instruction (/engine/reference/builder/#from)

Whenever possible, use current official images as the basis for your images. We recommend the Alpine image
(https://hub.docker.com/_/alpine/) as it is tightly controlled and small in size (currently under 6 MB), while still being a full
Linux distribution.

LABEL
Understanding object labels (/config/labels-custom-metadata/)

You can add labels to your image to help organize images by project, record licensing information, to aid in automation, or
for other reasons. For each label, add a line beginning with LABEL and with one or more key-value pairs. The following
examples show the different acceptable formats. Explanatory comments are included inline.

Strings with spaces must be quoted or the spaces must be escaped. Inner quote characters ( " ), must also be
escaped.

# Set one or more individual labels

Give feedback
LABEL com.example.version="0.0.1-beta"
LABEL vendor1="ACME Incorporated"
LABEL vendor2=ZENITH\ Incorporated
LABEL com.example.release-date="2015-02-12"
LABEL com.example.version.is-production=""

An image can have more than one label. Prior to Docker 1.10, it was recommended to combine all labels into a single
LABEL instruction, to prevent extra layers from being created. This is no longer necessary, but combining labels is still
supported.

# Set multiple labels on one line

LABEL com.example.version="0.0.1-beta" com.example.release-date="2015-02-12"

The above can also be written as:

# Set multiple labels at once, using line-continuation characters to break long lines
LABEL vendor=ACME\ Incorporated \
com.example.is-beta= \
com.example.is-production="" \
com.example.version="0.0.1-beta" \
com.example.release-date="2015-02-12"

See Understanding object labels (/config/labels-custom-metadata/) for guidelines about acceptable label keys and values.
For information about querying labels, refer to the items related to filtering in Managing labels on objects (/config/labels-
custom-metadata/#manage-labels-on-objects). See also LABEL (/engine/reference/builder/#label) in the Dockerfile
reference.

RUN
Dockerfile reference for the RUN instruction (/engine/reference/builder/#run)
https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 8/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

Split long or complex RUN statements on multiple lines separated with backslashes to make your Dockerfile more
readable, understandable, and maintainable.

apt-get
Probably the most common use-case for RUN is an application of apt-get . Because it installs packages, the
RUN apt-get command has several gotchas to look out for.

Always combine RUN apt-get update with apt-get install in the same RUN statement. For example:

RUN apt-get update && apt-get install -y \

package-bar \
package-baz \
package-foo \
&& rm -rf /var/lib/apt/lists/*

Using apt-get update alone in a RUN statement causes caching issues and subsequent apt-get install instructions
fail. For example, say you have a Dockerfile:

Give feedback
# syntax=docker/dockerfile:1
FROM ubuntu:18.04
RUN apt-get update
RUN apt-get install -y curl

After building the image, all layers are in the Docker cache. Suppose you later modify apt-get install by adding extra
package:

# syntax=docker/dockerfile:1
FROM ubuntu:18.04
RUN apt-get update
RUN apt-get install -y curl nginx

Docker sees the initial and modified instructions as identical and reuses the cache from previous steps. As a result the
apt-get update is not executed because the build uses the cached version. Because the apt-get update is not run,
your build can potentially get an outdated version of the curl and nginx packages.

Using RUN apt-get update && apt-get install -y ensures your Dockerfile installs the latest package versions with no
further coding or manual intervention. This technique is known as “cache busting”. You can also achieve cache-busting by
specifying a package version. This is known as version pinning, for example:

RUN apt-get update && apt-get install -y \

package-bar \
package-baz \
package-foo=1.3.*

Version pinning forces the build to retrieve a particular version regardless of what’s in the cache. This technique can also
reduce failures due to unanticipated changes in required packages.

Below is a well-formed RUN instruction that demonstrates all the apt-get recommendations.

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 9/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

RUN apt-get update && apt-get install -y \

aufs-tools \
automake \
build-essential \
curl \
dpkg-sig \
libcap-dev \
libsqlite3-dev \
mercurial \
reprepro \
ruby1.9.1 \
ruby1.9.1-dev \
s3cmd=1.1.* \
&& rm -rf /var/lib/apt/lists/*

The s3cmd argument specifies a version 1.1.* . If the image previously used an older version, specifying the new one
causes a cache bust of apt-get update and ensures the installation of the new version. Listing packages on each line can
also prevent mistakes in package duplication.

In addition, when you clean up the apt cache by removing /var/lib/apt/lists it reduces the image size, since the apt
cache is not stored in a layer. Since the RUN statement starts with apt-get update , the package cache is always

Give feedback
refreshed prior to apt-get install .

Official Debian and Ubuntu images automatically run apt-get clean

(https://github.com/moby/moby/blob/03e2923e42446dbb830c654d0eec323a0b4ef02a/contrib/mkimage/debootstrap#L82-
L105), so explicit invocation is not required.

Using pipes
Some RUN commands depend on the ability to pipe the output of one command into another, using the pipe character
( | ), as in the following example:

RUN wget -O - https://some.site | wc -l > /number

Docker executes these commands using the /bin/sh -c interpreter, which only evaluates the exit code of the last
operation in the pipe to determine success. In the example above this build step succeeds and produces a new image so
long as the wc -l command succeeds, even if the wget command fails.

If you want the command to fail due to an error at any stage in the pipe, prepend set -o pipefail && to ensure that an
unexpected error prevents the build from inadvertently succeeding. For example:

RUN set -o pipefail && wget -O - https://some.site | wc -l > /number

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 10/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

 Not all shells support the -o pipefail option.

In cases such as the dash shell on Debian-based images, consider using the exec form of RUN to explicitly choose
a shell that does support the pipefail option. For example:

RUN ["/bin/bash", "-c", "set -o pipefail && wget -O - https://some.site | wc -l > /number"]

CMD
Dockerfile reference for the CMD instruction (/engine/reference/builder/#cmd)

The CMD instruction should be used to run the software contained in your image, along with any arguments. CMD should
almost always be used in the form of CMD ["executable", "param1", "param2"…] . Thus, if the image is for a service,
such as Apache and Rails, you would run something like CMD ["apache2","-DFOREGROUND"] . Indeed, this form of the
instruction is recommended for any service-based image.

In most other cases, CMD should be given an interactive shell, such as bash, python and perl. For example,
CMD ["perl", "-de0"] , CMD ["python"] , or CMD ["php", "-a"] . Using this form means that when you execute

Give feedback
something like docker run -it python , you’ll get dropped into a usable shell, ready to go. CMD should rarely be used in
the manner of CMD ["param", "param"] in conjunction with ENTRYPOINT (/engine/reference/builder/#entrypoint),
unless you and your expected users are already quite familiar with how ENTRYPOINT works.

EXPOSE
Dockerfile reference for the EXPOSE instruction (/engine/reference/builder/#expose)

The EXPOSE instruction indicates the ports on which a container listens for connections. Consequently, you should use the
common, traditional port for your application. For example, an image containing the Apache web server would use
EXPOSE 80 , while an image containing MongoDB would use EXPOSE 27017 and so on.

For external access, your users can execute docker run with a flag indicating how to map the specified port to the port of
their choice. For container linking, Docker provides environment variables for the path from the recipient container back to
the source (ie, MYSQL_PORT_3306_TCP ).

ENV
Dockerfile reference for the ENV instruction (/engine/reference/builder/#env)

To make new software easier to run, you can use ENV to update the PATH environment variable for the software your
container installs. For example, ENV PATH=/usr/local/nginx/bin:$PATH ensures that CMD ["nginx"] just works.

The ENV instruction is also useful for providing required environment variables specific to services you wish to
containerize, such as Postgres’s PGDATA .

Lastly, ENV can also be used to set commonly used version numbers so that version bumps are easier to maintain, as
seen in the following example:

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 11/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

ENV PG_MAJOR=9.3
ENV PG_VERSION=9.3.4
RUN curl -SL https://example.com/postgres-$PG_VERSION.tar.xz | tar -xJC /usr/src/postgres && …
ENV PATH=/usr/local/postgres-$PG_MAJOR/bin:$PATH

Similar to having constant variables in a program (as opposed to hard-coding values), this approach lets you change a
single ENV instruction to auto-magically bump the version of the software in your container.

Each ENV line creates a new intermediate layer, just like RUN commands. This means that even if you unset the
environment variable in a future layer, it still persists in this layer and its value can be dumped. You can test this by creating
a Dockerfile like the following, and then building it.

# syntax=docker/dockerfile:1
FROM alpine
ENV ADMIN_USER="mark"
RUN echo $ADMIN_USER > ./mark
RUN unset ADMIN_USER

Give feedback
$ docker run --rm test sh -c 'echo $ADMIN_USER'

mark

To prevent this, and really unset the environment variable, use a RUN command with shell commands, to set, use, and
unset the variable all in a single layer. You can separate your commands with ; or && . If you use the second method,
and one of the commands fails, the docker build also fails. This is usually a good idea. Using \ as a line continuation
character for Linux Dockerfiles improves readability. You could also put all of the commands into a shell script and have the
RUN command just run that shell script.

# syntax=docker/dockerfile:1
FROM alpine
RUN export ADMIN_USER="mark" \
&& echo $ADMIN_USER > ./mark \
&& unset ADMIN_USER
CMD sh

$ docker run --rm test sh -c 'echo $ADMIN_USER'

ADD or COPY
Dockerfile reference for the ADD instruction (/engine/reference/builder/#add)
Dockerfile reference for the COPY instruction (/engine/reference/builder/#copy)

Although ADD and COPY are functionally similar, generally speaking, COPY is preferred. That’s because it’s more
transparent than ADD . COPY only supports the basic copying of local files into the container, while ADD has some
features (like local-only tar extraction and remote URL support) that are not immediately obvious. Consequently, the best
use for ADD is local tar file auto-extraction into the image, as in ADD rootfs.tar.xz / .

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 12/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

If you have multiple Dockerfile steps that use different files from your context, COPY them individually, rather than all
at once. This ensures that each step’s build cache is only invalidated (forcing the step to be re-run) if the specifically
required files change.

For example:

COPY requirements.txt /tmp/

RUN pip install --requirement /tmp/requirements.txt
COPY . /tmp/

Results in fewer cache invalidations for the RUN step, than if you put the COPY . /tmp/ before it.

Because image size matters, using ADD to fetch packages from remote URLs is strongly discouraged; you should use
curl or wget instead. That way you can delete the files you no longer need after they’ve been extracted and you don’t
have to add another layer in your image. For example, you should avoid doing things like:

ADD https://example.com/big.tar.xz /usr/src/things/

RUN tar -xJf /usr/src/things/big.tar.xz -C /usr/src/things
RUN make -C /usr/src/things all

Give feedback
And instead, do something like:

RUN mkdir -p /usr/src/things \

&& curl -SL https://example.com/big.tar.xz \
| tar -xJC /usr/src/things \
&& make -C /usr/src/things all

For other items (files, directories) that do not require ADD ’s tar auto-extraction capability, you should always use COPY .

ENTRYPOINT
Dockerfile reference for the ENTRYPOINT instruction (/engine/reference/builder/#entrypoint)

The best use for ENTRYPOINT is to set the image’s main command, allowing that image to be run as though it was that
command (and then use CMD as the default flags).

Let’s start with an example of an image for the command line tool s3cmd :

ENTRYPOINT ["s3cmd"]
CMD ["--help"]

Now the image can be run like this to show the command’s help:

$ docker run s3cmd

Or using the right parameters to execute a command:

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 13/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

$ docker run s3cmd ls s3://mybucket

This is useful because the image name can double as a reference to the binary as shown in the command above.

The ENTRYPOINT instruction can also be used in combination with a helper script, allowing it to function in a similar way to
the command above, even when starting the tool may require more than one step.

For example, the Postgres Official Image (https://hub.docker.com/_/postgres/) uses the following script as its ENTRYPOINT :

#!/bin/bash
set -e

if [ "$1" = 'postgres' ]; then

chown -R postgres "$PGDATA"

if [ -z "$(ls -A "$PGDATA")" ]; then

gosu postgres initdb
fi

exec gosu postgres "$@"

Give feedback
fi

exec "$@"

 Configure app as PID 1

This script uses the exec Bash command (https://wiki.bash-hackers.org/commands/builtin/exec) so that the final
running application becomes the container’s PID 1. This allows the application to receive any Unix signals sent to the
container. For more, see the ENTRYPOINT reference (/engine/reference/builder/#entrypoint).

The helper script is copied into the container and run via ENTRYPOINT on container start:

COPY ./docker-entrypoint.sh /
ENTRYPOINT ["/docker-entrypoint.sh"]
CMD ["postgres"]

This script allows the user to interact with Postgres in several ways.

It can simply start Postgres:

$ docker run postgres

Or, it can be used to run Postgres and pass parameters to the server:

$ docker run postgres postgres --help

Lastly, it could also be used to start a totally different tool, such as Bash:

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 14/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

$ docker run --rm -it postgres bash

VOLUME
Dockerfile reference for the VOLUME instruction (/engine/reference/builder/#volume)

The VOLUME instruction should be used to expose any database storage area, configuration storage, or files/folders
created by your docker container. You are strongly encouraged to use VOLUME for any mutable and/or user-serviceable
parts of your image.

USER
Dockerfile reference for the USER instruction (/engine/reference/builder/#user)

If a service can run without privileges, use USER to change to a non-root user. Start by creating the user and group in the
Dockerfile with something like:

RUN groupadd -r postgres && useradd --no-log-init -r -g postgres postgres

Give feedback
 Consider an explicit UID/GID

Users and groups in an image are assigned a non-deterministic UID/GID in that the “next” UID/GID is assigned
regardless of image rebuilds. So, if it’s critical, you should assign an explicit UID/GID.

Due to an unresolved bug (https://github.com/golang/go/issues/13548) in the Go archive/tar package’s handling of

sparse files, attempting to create a user with a significantly large UID inside a Docker container can lead to disk
exhaustion because /var/log/faillog in the container layer is filled with NULL (\0) characters. A workaround is to
pass the --no-log-init flag to useradd. The Debian/Ubuntu adduser wrapper does not support this flag.

Avoid installing or using sudo as it has unpredictable TTY and signal-forwarding behavior that can cause problems. If you
absolutely need functionality similar to sudo , such as initializing the daemon as root but running it as non- root ,
consider using “gosu” (https://github.com/tianon/gosu).

Lastly, to reduce layers and complexity, avoid switching USER back and forth frequently.

WORKDIR
Dockerfile reference for the WORKDIR instruction (/engine/reference/builder/#workdir)

For clarity and reliability, you should always use absolute paths for your WORKDIR . Also, you should use WORKDIR instead
of proliferating instructions like RUN cd … && do-something , which are hard to read, troubleshoot, and maintain.

ONBUILD
Dockerfile reference for the ONBUILD instruction (/engine/reference/builder/#onbuild)

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 15/16
10/29/22, 9:20 AM Best practices for writing Dockerfiles | Docker Documentation

An ONBUILD command executes after the current Dockerfile build completes. ONBUILD executes in any child image
derived FROM the current image. Think of the ONBUILD command as an instruction the parent Dockerfile gives to the
child Dockerfile .

A Docker build executes ONBUILD commands before any command in a child Dockerfile .

ONBUILD is useful for images that are going to be built FROM a given image. For example, you would use ONBUILD for a
language stack image that builds arbitrary user software written in that language within the Dockerfile , as you can see
in Ruby’s ONBUILD variants (https://github.com/docker-
library/ruby/blob/c43fef8a60cea31eb9e7d960a076d633cb62ba8d/2.4/jessie/onbuild/Dockerfile).

Images built with ONBUILD should get a separate tag, for example: ruby:1.9-onbuild or ruby:2.0-onbuild .

Be careful when putting ADD or COPY in ONBUILD . The “onbuild” image fails catastrophically if the new build’s context is
missing the resource being added. Adding a separate tag, as recommended above, helps mitigate this by allowing the
Dockerfile author to make a choice.

Examples of Docker Official Images

These Official Images have exemplary Dockerfile s:

Give feedback
Go (https://hub.docker.com/_/golang/)
Perl (https://hub.docker.com/_/perl/)
Hy (https://hub.docker.com/_/hylang/)
Ruby (https://hub.docker.com/_/ruby/)

Additional resources:
Dockerfile Reference (/engine/reference/builder/)
More about Base Images (/develop/develop-images/baseimages/)
More about Automated Builds (/docker-hub/builds/)
Guidelines for Creating Docker Official Images (/docker-hub/official_images/)
Best practices to containerize Node.js web applications with Docker (https://snyk.io/blog/10-best-practices-to-
containerize-nodejs-web-applications-with-docker)

parent image (/search/?q=parent image), images (/search/?q=images), dockerfile (/search/?q=dockerfile), best practices
(/search/?q=best practices), hub (/search/?q=hub), official image (/search/?q=official image)

https://docs.docker.com/develop/develop-images/dockerfile_best-practices/ 16/16