0% found this document useful (0 votes)
11 views5 pages

Release Notes

Uploaded by

tiasnanang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
11 views5 pages

Release Notes

Uploaded by

tiasnanang
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 5

20240417 epon I_V3.4.

2 Release
1. Added CLI fullversion upgrade (supports tftp and ftp)
2. Add CLI to upload and backup configuration files (supports tftp and ftp)
3. Add sip template unbundling
4. Add batch configuration modification of wan and wlan
5. Add LLDP PON side processing
6. Solve the problem that the port cost and priority configured for the mstp
instance do not take effect
7. Solve the problem that turning on DHCP may cause the CPU to be too high
8. Optimize LACP processing
9. Optimize ONU upgrade function
10. Optimize pon startup process
11. If more than 64 ONUs are registered on the PON port, offline ONUs can be
replaced (need to be enabled)
12. Update cloud management plug-in: support OLT upgrade

20240315 epon IR_V3.4.1 Release


1. Fix vlan trunk mode config save issue
2. Fix WAN status display issue
3. Fix TAC authentication may cause the system hang issue
4. Aggregation group member ports can be individually configured with description
information and admin status.
5. Add SNMP speed limit configuration
6. Update cloud management plug-in: support telnet access to devices

20240201 epon I_V3.4.0 Release


1. New ONU protocols: TR069, DHCP, ACL, restore factory configuration
2. Added ONU WAN/TR069/WLAN/VoIP/CATV preconfiguration function
3. Add WAN DHCP-SERVER enablement
4. Add WLAN channel and bandwidth parameter configuration
5. Add ONU SIP support domain name configuration
6. Add CPU alarm threshold configuration
7. Update cloud management plug-in: supports alarm reporting, and device reboot

20231222 epon I_V3.3.6 Release


1. Fix port aggregation configuration may be lost after saving and rebooting
2. Optimize ONU VOIP profile modification

20231219 epon I_V3.3.5 Release


1. Add inbound sub-IP dhcp client function
2. Add IP conflict detection function
3. Optimize SNMP response speed
4. Optimize the problem of slow RSTP port status migration
5. Optimize ARP processing

20231122 epon I_V3.3.4 Release


1. Add 802.1x function
2. The maximum number of port traffic monitoring monitors is changed to 100.
3. Optimize the problem of possible disconnection in PON
4. Optimize CLI style
5. Adding reasons for register more than 64 units to the denylist

20231026 epon I_V3.3.3 Release


1. Add ONU VOIP configuration function
2. Add DHCP Option82 circuit ID and remote ID user customization
3. Optimize DHCP server
4. Optimize memory increase problem

20230920 epon I_V3.3.2 Release


1. Compatible with China Mobile onu registration

20230912 epon I_V3.3.1 Release


1. Optimize ONU registration
2. Optimize ONU downstream bandwidth limit
3. Add the function of regularly deleting offline ONUs

20230828 epon I_V3.3.0 Release


1. Update http framework
2. Update 8022 firmware
3. Add downstream bandwidth limit
4. DHCP trust port allows configuration aggregation
5. Fix V3.2.10 onu traffic monitor can't add onu issue

20230726 epon I_V3.2.10 Release


1. disable onu register fec default because rtt got long

20230703 epon V3.2.9 Release


1. Fix xe04/xe08 display problerm

20230615 epon I_V3.2.8 Release


1. Add traceroute diagnosis
2. Add WEB to create WAN connections in batches
3. Add ONU MAC ONLY authentication
4. Add ERPS function
5. Optimize the port configuration acquisition method
6. Restrict the devol account to login only through the console port

20230522 epon I_V3.2.7 Release


1. Fix upstream bandwidth command cannot be configured issue
2. Fix the problem that configuring the port admin status and port speed may cause
the failure of configuration recovery
3. Optimize port display
4. Optimize the method of obtaining CPU usage
5. Optimize RSTP packet sending

20230428 epon I_V3.2.6 Release


1. Fix onu mpcp rtt drift parameter
2. Fix dhcp snooping and option82 problerm
3. Add hardware detect process
4. Fix file open many and let web can't access problerm

20230413 epon I_V3.2.5 Release


1. Add ONU traffic monitor function
2. Add syslog alarm hostname source
3. Add l3 default route forwarding function
4. Add AAA local login
5. Add ONU timer task reatart policy
6. Solve the abnormal problem of port traffic monitor
7. Solve the problem of switching PON ports, the default name of the ONU does not
migrate
8. Optimize the DHCP server and support multiple interfaces to assign addresses
9. Registered more than 64 ONUs on the same PON port will added to the blacklist
10.Optimize onu register process
11.Optimize the web maybe cause 100% CPU issues

20230216 epon I_V3.2.4 Release


1. Fix the traffic graph problerm
2. Fix dhcpv6 problerm
3. Add pon port rate limit

20230214 epon I_V3.2.3 Release


1. Fix loid register maybe not sent oam message to onu

20230203 epon I_V3.2.2 Release


1. Add broadcast oam to control tx power of onu
2. Fix IGMP packet process
3. Add LLDP function
4. Optimize ONU registration, add the deregister reason for Only CTC LOST

20221206 epon I_V3.2.1 Release


1. Fix onu port vlan profile problem, this is for batch config all onu port vlan
2. Fix NTP config maybe discard config

20221202 epon I_V3.2.0 Release


1. Fix the problem that the CLI and web CPU usage are inconsistent
2. Fix the problem that the configuration of the static route restore fails when
reboot olt
3. Add NTP to support domain name configuration
4. Fix IPv6 configuration issues
5. Add NTP time zone option
6. Fix radius timeout/dump problem
7. Add sub-IP management
8. Add 2.5G port rate configuration to the uplink fiber port
9. Add PON port TELNET/WEB access control
10. Add tacacs+ authentication
11. Add WEB automatic refresh function
12. Add port traffic monitoring function
13. When repairing ONU batch upgrade, there may be a problem that the upgrade
cannot be successful
14. When repairing and upgrading the ONU, downloading the alarm list may cause the
web to be inaccessible
15. Add the received optical power of PON module RSSI by snmp

20220902 epon I_V3.1.20 Release


1. Add CPU and memory usage with SNMP

20220815 epon I_V3.1.19 Release


1. Fix onu always register-deregister and let the olt hang problerm
2. Fix zh lang display problerm
3. Fix web performance display for zh lang

20220728 epon I_V3.1.18 Release


1. Fix lang set for web-lang
2. Fix onu register problerm

20220704 epon I_V3.1.17 Release


1. Optimized CTC version compatibility, backward compatible with CTC 2.1,
2.0.1.3.1.0
2. Fixed the problem that some old ONUs returned OAM not standard and caused PON to
hang

20220701 epon I_V3.1.16 Release


1. Add MB/GB display for PORT performance in webgui
2. Add support for CATV protocol
3. Fix problerm about QinQ that not support config the same vlan to the same port
4. Remove the onu reboot action for ctc los
5. Add button in ONU DENY Page for support add to allow list directly
20220614 epon I_V3.1.15 Release
1. Fix 3.1.14 version will discard default gateway ip problerm
2. solved the wan name exceed 32bytes problerm

20220607 epon I_V3.1.14 Release


1. Optimize register onu
2. Add wan type in web
3. Fix web igmp config problerm
4. Fix default gateway config ip checking
5. Add static route support default gateway
6. Fix DNS config fail, and display 255.255.255.255
7. Fix wan setting service name problerm

20220527 epon I_V3.1.13 Release


1. Fix WiFi config recovery problerm
2. Fix the onu version not update after upgrade
3. Fix the onu fw get problerm, because the string length of fw is random

20220518 epon I_V3.1.12 Release


1. Fix wan config problerm after onu reboot
2. Add hgu wan config check command

20220505 epon I_V3.1.11 Release


1. Fix web issue for memory of http connections residue
2. Add CPU/Memory usage monitor
3. Fix multi pon port igmp access problem
4. Add snmp port name display for iftable/ifxtable
5. Fix IGMP query packet problem
6. Fix DHCP packet parser problem
7. Fix ifxtable display problem

20220414 epon I_V3.1.10 Release


1. Fix multi users access web problem
2. Fix always refresh will make web hange problem
3. Add auto save config task, default disable

20220402 epon I_V3.1.9 Release


1. Fix web save config fail
2. Fix pon port link down problem
3. Add common user rights limit. common user can only get informations
4. Adaptor XGE connect DAC cable
5. Fix onu-ipmgmt config fail problem
6. Fix onu lan port admin status set problem

20220324 epon I_V3.1.8 Release


1. Optimize PON Platform Link down problem
2. Fix onu ip set problem

20220314 epon I_V3.1.7 Release


1. Add ONU performance switch
2. Add command "show port vlan xx"
3. Fix ip route disable
4. Optimize web access speed
5. Fix web may not be accessible problem
6. Shorten the retention time of http sessions

20220226 epon I_V3.1.6 Release


1. Fix snmp memory up
20220218 epon I_V3.1.5 Release
1. Fix onuInfo table memory up with snmp
2. Fix snmp make cpu usage to 100%

20220217 epon I_V3.1.4 Release


1. Fix snmp make memory up problem
2. Add olt reboot reason to log
3. Add onu perfmance monitor feature

20220113 epon I_V3.1.3 Release


1. Fix fault oam maybe let olt fault
2. Optimize ONU Register

20220104 epon I_V3.1.2 Release


1. Add default set onu mac aging time to 300s
2. Add default open fec for ont
3. Change mtu range to 128-9216
4. Optimize exec-timeout for cli
5. Fix openapi for accesskey configration
6. Add support Cloud for 16M version
7. Fix the onu version display in web, add ONT extend model display

20211216 epon I_V3.1.0


System framework update
1. Re-implementation ONU Register framework
2. optimize ONU Management channel for oam stack
3. Optimize MPCP open window parameter
4. Optimize OLT internal message mechanism

Functional update
1. Add NTP manual update
2. Add device type parameter to snmp trap, to identify epon & gpon olt
3. Optimize snmp config save
4. Add snmp system control
5. Add SSH & snmp protocol port modify
6. Add multi trap ip config for snmp, and location & contact
7. Add Timer task for reboot olt & reboot all onus
8. Add traffic classification command: traffic-translate for vlan
9. Add WEBUI System theme select
10. Add HSGQ Cloud for support access olt in any place of the world

You might also like