Scribd
Upload
51 views2 pages

Ipmitool Basic Commands

Uploaded by

r19512695
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
51 views2 pages

Ipmitool Basic Commands

Uploaded by

r19512695
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 2

# General Commands

ipmitool help
# Displays help information for ipmitool.

man ipmitool
# Displays the manual page for ipmitool.

# Management Controller Commands


ipmitool mc info
# Displays information about the management controller.

ipmitool mc reset [ warm | cold ]


# Resets the management controller. Use 'warm' for a soft reset and 'cold' for a
hard reset.

# Field-Replaceable Unit (FRU) Commands


ipmitool fru print
# Displays details of the field-replaceable units.

# Sensor Data Repository (SDR) Commands


ipmitool sdr list
# Lists all sensor data records.

ipmitool sdr type list


# Lists all sensor types.

ipmitool sdr type Temperature


# Lists all temperature sensors.

ipmitool sdr type Fan


# Lists all fan sensors.

ipmitool sdr type 'Power Supply'


# Lists all power supply sensors.

# Chassis Commands
ipmitool chassis status
# Displays the status of the chassis.

ipmitool chassis identify [time]


# Turns on the front panel identify light for the specified time (default is 15
seconds).

ipmitool chassis power soft


# Initiates a soft shutdown via ACPI.

ipmitool chassis power cycle


# Issues a hard power off, waits 1 second, then powers on.

ipmitool chassis power off


# Issues a hard power off.

ipmitool chassis power on


# Issues a hard power on.

ipmitool chassis power reset


# Issues a hard reset.

# Boot Device Commands


ipmitool chassis bootdev pxe
# Sets the boot device to PXE for the next reboot.

ipmitool chassis bootdev cdrom


# Sets the boot device to CD-ROM for the next reboot.

ipmitool chassis bootdev bios


# Sets the boot device to BIOS for the next reboot.

# System Event Log (SEL) Commands


ipmitool sel info
# Displays information about the system event log.

ipmitool sel list


# Lists all entries in the system event log.

ipmitool sel elist


# Lists all entries in the system event log with extended information.

ipmitool sel clear


# Clears the system event log.

# User and Network Settings Commands


ipmitool user list 1
# Lists all users on channel 1.

ipmitool user set password 2


# Sets the password for the user with ID 2.

ipmitool lan print 1


# Displays LAN configuration for channel 1.

ipmitool lan set 1 ipsrc [ static | dhcp ]


# Sets the IP source to static or DHCP for channel 1.

ipmitool lan set 1 ipaddr {YOUR DESIRED IP}


# Sets the IP address for channel 1.

ipmitool lan set 1 netmask {YOUR NETMASK}


# Sets the netmask for channel 1.

ipmitool lan set 1 defgw ipaddr 10.0.1.1


# Sets the default gateway for channel 1.

You might also like