www.SpecLcd.

com

Official UK Representative

Unit A Merlin Centre, Gatehouse Close, Aylesbury, HP19 8DP, ENGLAND

Tel.: +44 (0)1296-469770 [email protected]

Fax.: +44 (0)1296-469779 www.displaze.com

Please verify this is the latest information. E&OE

www.SpecLcd.com

www.SpecLcd.com
2. History of Specification Revision
Date 2002.06.19 Rev. 2 Page Contents 4,5 Revised CN2 pin assignment : Pin-1: GND; Pin-4: H.V Pin-1:H.V; Pin-4:GND Revised 6.3 Electrical Characteristics of Backlight : 8 Starting Voltage: Min.(900); Lamp Voltage: Typ.(440) Starting Voltage: Max.850; Lamp Voltage: Typ.(443) 20 Revised 12.2 Lot No. Definition: Year Month Week Year Month Day

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2
is

Page: 2

reproduction

permission

prohibited.

www.SpecLcd.com

www.SpecLcd.com
3. LCD Module
3.1 Main Data
No. Item 197.0(W) x Contents 145.0(H) x x 8.0(D) Unit mm mm dots mm mm (1) Module size (2) Viewing area (3) Dot Number (4) Dot Size (5) Dot pitch (6) LCD type

(158.0) (W) 640

(118.0) (H) x 480 (H)

x 3 (R.G.B) (W) 0.064(W) 0.079(W) x x

0.222(H) 0.237(H)

Color-STN (Negative type) with glare upper polarizer and transmissive rear polarizer . 0.7mm thickness glass -

(7) Contrast ratio (8) Duty (9) Viewing direction (10) Operating temperature (11) Storage temperature (12) Backlight (13) Power Supply Voltage (14) Weight

(30) 1/484 6 oclock +0 ~ +50

C C pcs g

-20 ~ +70 Cold Cathode Fluorescent Lamp (CCFL) x 1 3.3V , 36.6V (240)

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2
is

Page: 3

reproduction

permission

prohibited.

www.SpecLcd.com

www.SpecLcd.com
3.2 Outline Dimension

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

reproduction

permission

www.SpecLcd.com

CN1 : FPC Pitch 1.0mm Suitable Connector 52271-2090(MOLEX) CN2 : M63-M83-04 (MITSUMI) PIN-1 : H.V ; PIN-4 : GND Note 1 : All dimensional tolerance unless otherwise specified+/-0.5 Note 2 : Scale : NTS , Unit : mm
Ver.: 2
is

Page: 4

prohibited.

www.SpecLcd.com

3.3 Interface Pin Connection

CN1 Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 FPC : Pitch 1.0mm /Suitable Connector : 52271-2090(MOLEX) Signal FLM VSS CL1 VSS CL2 VSS D0 D1 D2 D3 D4 D5 D6 D7 DISP VDD VDD VSS VLCD VSS Scan GND Input data latch signal GND Data shift clock GND Display data Display data Display data Display data Display data Display data Display data Display data Display control signal H:ON , L:OFF Logic supply voltage Logic supply voltage GND Power supply for LCD GND start-up signal Pin Function

CN2 : M63-M83-04 (MITSUMI) /Suitable connector : M61-M73-04(MITSUMI) <inter connector type> M60-04-30-114P(MITSUMI) <straight type> M60-04-30-134P(MITSUMI) <angle type> Pin No. 1 2 3 4 Signal H.V N.C N.C GND ----------CFL GND Pin Function Power supply voltage for CFL

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2
is

Page: 5

reproduction

permission

prohibited.

www.SpecLcd.com

www.SpecLcd.com
4. Block Diagram
CN1

FLM CL1 CL2 DISP

D0~D7 Y1

Column Driving Circuit

Y1920

Row Driving Circuit

X1

COLOR
X480

LCD

PANEL

640RGB480 DOTS

VDD VSS VLCD

Power
Supply Circuit

CN2 H.V GND

CFL

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2
is

Page: 6

reproduction

permission

prohibited.

www.SpecLcd.com

www.SpecLcd.com
5. Maximum Ratings
5.1 Electrical Absolute Maximum Ratings. (VSS=0V) Item Symbol Min. Max. Unit Power supply for Logic VDD-VSS -0.3 7.0 V Power supply for LCD driver VLCD-VSS 0 42.0 V Input voltage (Note 1) VI VSS-0.3 VDD+0.3 V Note 1. FLM,M,CL1,CL2,DISP,D0~D7. Note 2. Ta=25C Note 3. Please be sure users are grounded when handling LCD module. VSS=0V

5.2 Environmental Absolute Maximum Ratings Storage Item MIN. MAX. Ambient Temperature -20C 70C Humidity Note 4 Vibration Shock -

Operating MIN. MAX. 0C 50C Note 4 -

Remark Note1,2,3 No Condensation Depend on using design

Note 1. Ta at -20C --------< 48 hours, at 70C --------< 120 hours. Note 2. Background color changes slightly depending on ambient temperature. The phenomenon is reversible. Note 3. When LCM is operated at 0C, the lift time of CFL will be reduced. Need to make sure of value of IL and characteristics of inverter. The response time at 0C will be lower. Note 4. Ta<=50C : 85%RH MAX. Ta> 50C : Absolute humidity must be lower than the humidity of 85% RH at 50C. Note 5. The module should be operated normally after the test is finished.

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2
is

Page: 7

reproduction

permission

prohibited.

www.SpecLcd.com

www.SpecLcd.com
6. Electrical Characteristics
6.1 Electrical Characteristics of LCD Item Symbol Condition MIN. Power Supply for Logic VDDVSS 3.15 Power Adjustment voltage Ta=5C,=0C Note (1) VLCDVSS Ta=25C,=0C 35.1 Ta=40C,=0C 32 Input Signal Voltage VIH H Level 0.8VDD Note (2) VIL L Level 0 Power supply current IDD VDD=3.3V (Logic)Note (3) Power supply current ILCD VDD=3.3V (LCD driver) Note (3) Frame Freguency fFLM Note (4) Typ. 3.3 36.6 10 12 (100) Max. 3.45 40 38.1 VDD 0.2VDD 30 50 (120) Unit V V V V V mA mA Hz

Note (1) In proportion as the VLCD decrease the brightness will increase. The value is specified as the voltage at which the optimum contrast is obtained. Note (2) FLM,CL1,CL2,DISP,D0~D7 Note (3) fFLM=(100)Hz,Ta=25C,Display pattern is Black/White cross pattern as below. RGB RGB

Note (4) Need to make sure that there is no flicker and ripple phenomenon when setting the Frame Frequency in your set. 6.3 Electrical Characteristics of Backlight Item Symbol Min. Typ. Max. Unit Remark Starting Voltage VS 850 Vrms Ta=25C Lamp Voltage VL (443) Vrms Ta=25C Frequency fL 40 60 80 KHz Ta=25C Lamp Current IL (2.5) (4.0) (4.5) mArms Ta=25C Note (1) Starting voltage is higher when LCM at lower temperature. Note (2) Average life time of CFL will be decreased when LCM is operated at lower temperature Note (3) CFL life time : 10000 hours Min. at IL=4.0mA, Ta=25C

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2
is

Page: 8

reproduction

permission

prohibited.

www.SpecLcd.com

www.SpecLcd.com
7. Optical Characteristics
7.1 Optical Characteristics of LCD Condition X axle Viewing Angle Range 1, 2 CR2 Y axle Contrast Ratio CR =0 Rise tr =0,=0 Response Time Fall tf =0,=0 R G B W x y x y x y x y Item Symbol Min. 60 35 (0.44) (0.30) (0.28) (0.44) (0.15) (0.16) (0.27) (0.30) Typ. (30) (340) (100) (0.49) (0.35) (0.33) (0.49) (0.20) (0.21) (0.32) (0.35) Ta= 25C.(Backlight On) Max. Unit Remark Deg. Note 1,2 Note 3,4 ms Note 5 ms (0.54) (0.40) (0.38) (0.54) (0.25) (0.26) (0.37) (0.40) -

Color Tone (CIE Coordinate)

=0,=0

Note 1.

Definition of and
2 1 Eye from (,1)

Note 2.

Definition of Viewing angle 1 and 2 CR

Eye from (,2)

Y(=180)

X
Y(=0)

2.0 1

1<0<2 2

CR vs Viewing and

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2
is

Page: 9

reproduction

permission

prohibited.

www.SpecLcd.com

www.SpecLcd.com
Note 3.
CR=

Definition of Contrast Ratio CR

Brightness at selected dot (B1) Brightness at non-selected dot (B2)

B1 B2 Sensor

B1 Brightness

B2

Back light Sensor : BM-7 Aperture : 1 Distance : 50 cm

Operation voltage Note 4. Definition of CRand VOP

CR

VOP

Operation Voltage

Note 5.

Definition of optical response time

Non-selected state Brightness

Selected state

Non-selected state

100%

90%

tr Rise time

tf Fall time

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

10% Ver.: 2 Page: 10

is prohibited. reproduction permission

www.SpecLcd.com

www.SpecLcd.com
7.2 Optical Characteristics of Backlight Item Min, Brightness Brightness Uniformity Typ. (100) Max. +/-30 Unit cd/m2 % Remark Note 1,2,3 Note 2,3,4

Note 1. Measurement Condition: Display data should be all ON (D0~D7=HIGH). VLCD should be adjusted at the voltage where the peak contrast is obtained. Start measuring after CCFL working 30 minutes. Note 2. Measurement of the following 5 points on the display.

Y=320 Y=960

Y=1600

dots Active area

X=120 X=240 X=360 dots

P1 P4

P3

P2 P5

Note 3. The brightness shall be the average of P1~P5 point. Note 4. Definition of the brightness Uniformity

Max brightness or Min brightness Average brightness Average brightness

x100%

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 11
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com
8. Interface Timing Chart
8.1 Timing Chart

CL1

(480+n)xT
FLM

D0~D7

X1

X2

X239 X240

Dummy data

CL1

CL2
X1

X2 B634 R635 G635 B635 R636 G636 B636 R637 G637 B637 R638 G638 B638 R639 G639 B639

D7 D6 D5 D4 D3 D2 D1 D0

R0 G0 B0 R1 G1 B1 R2 G2

B2 R3 G3 B3 R4 G4 B4 R5

G5 B5 R6 G6 B6 R7 G7 B7

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 12
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com
8.2. Electrical Characteristics (VDD=3.0~4.5V ,VLCD= +10.0~ +42.0V, Ta=+0C~50C) Item Symbol Min. Typ. Max. Unit Shift clock period tWCK 66 ns Shift clock H pulse wide tWCKH 23 ns Shift clock L pulse wide tWCKL 23 ns Data setup time tDS 10 ns Data hold time tDH 25 ns Latch pulse H pulse wide tWLPH 30 ns Shift clock rise to latch pulse rise time tLD 10 ns Shift clock fall to latch pulse fall time tSL 30 ns Latch pulse rise to shift ckock rise time tLS 30 ns Latch pulse fall to shift ckock fall time tLH 30 ns Enable setup time tTS 12 ns Input signal rise time tR 50 ns Input signal fall time tF 50 ns Output delay tD 44 ns FLM setup time tFS 30 ns FLM hold time tFH 50 ns

tWLPH
CL1
VIH VIL

tLD

tSL tLS tF tWCK

tLH tWCKH tWCKL

VIH VIL

CL2

tR

tDS
VIH VIL

tDH

D0~D7

LAST DATA
Horizontal retrace period VIH VIL

TOP DATA

CL1

tDS
CL2

tDH

..

20

tFS
FLM

tFH

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 13
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com
8.3 Power Supply and Signal Sequence Do not apply DC voltage to the LCD panel because that induces the electrochemical reaction and reduces its life time. Please follow the power supply ON/OFF sequence to prevent DC driving of LCD or latch-up of COMS LSI, as shown below.
tDLD tDLD

VDD
tCH 0.8XVDD 0.8XVDD tCH

CL1
tDLCr tDLCf

VLCD

tDLCs 0.8XVDD

tDLCs 0.8XVDD 0.2XVDD tLDH

DISPOFF

0.2XVDD tLDH tDOr

tDOf tVH

POWER ON

POWER OFF MAX. 100 100 UNIT ms ms ms ns ns ms ms ms ms COMMENT

SYMBOL tDLD tCH tLDH tDOr tDOf tDLCr tDLCf tDLCs tVH

MIN. 200 0 20 0 0 20 200

Note 1. Please keep the specified sequence because wrong sequence may cause permanent damage to the LCD panel. Note 2. Please use DISPOFF function to set display off. Switch by others different from the DISPOFF function may cause display deterioration.

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 14
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com
8.4 Input Data Allocation Table D D D D D Data Signal 7 6 5 4 3 Y 1 X 1 2 3 4 5 6 7 8 9 10 | | | 478 479 480 R : RED G : GREEN B : BLUE R R R R R R R R R R | | | R R R G G G G G G G G G G | | | G G G B B B B B B B B B B | | | B B B R R R R R R R R R R | | | R R R G G G G G G G G G G | | | G G G B B B B B B B B B B | | | B B B R R R R R R R R R R | | | R R R G G G G G G G G G G | | | G G G B B B B B B B B B B | | | B B B R R R R R R R R R R | | | R R R G G G G G G G G G G | | | G G G B B B B B B B B B B | | | B B B 2 3 4 5 D 2 6 D 1 7 D 0 8 D 7 9 D 6 D 5 D 4 ------D 4 1 9 1 6 G G G G G G G G G G | | | G G G D 3 1 9 1 7 B B B B B B B B B B | | | B B B D 2 1 9 1 8 R R R R R R R R R R | | | R R R D 1 1 9 1 9 G G G G G G G G G G | | | G G G D 0 1 9 2 0 B B B B B B B B B B | | | B B B

10 11 12

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 15
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com
9. QUALITY ASSURANCE
9.1 Appearance Inspection
Appearance inspection should be done under the following condition. (1) In the dark room. The CFL should be lighted with the prescribed inverter. (2) The distance from eyes to LCD must be 30 cm. (3) Viewing direction must be within 30 degrees to vertical line of LCD center.

EYE 30 30

EYE

LCD

9.2 Definition of A zone, B zone and C zone

Active area Viewing area Window of Bezel

A ZONE B ZONE C ZONE

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 16
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com
9.3 Appearance Criterion
Customer and supplier should hold a discussion when there is any problem about standard quality assurance or special quality assurance is needed. Inspection Standard: MIL-STD-105E normal inspection level II
No. Item Criterion Zone AQL Line shape: Length Width Acceptable Qty L<=4.0 W<=0.03 Disregard L<=3.0 0.03<W<=0.05 2 L<=2.5 0.05<W<=0.1 1 Stains 0.1<W As round shape Scratches Round shape: 1 Black spots Diameter Acceptable Qty White spots D<=0.10 Disregard Foreign particles 0.10<D<=0.20 5 0.20<D<=0.25 3 0.25<D 0 The total number of Line+Round is 5 max. Any defect wiped out easily is acceptable. Diameter D<=0.30 0.30<D<=0.60 0.60<D<=1.0. 1.0<D The total number of bubbles is 3 max.

W L

A
D=(a+b)/2 a b

2.5

Bubbles

Acceptable Qty Disregard 3 1 0

2.5

Viewing angle defect. Missing dots or missing lines. Display quality Malfunction. Contrast ratio defect. Power consumption exceeds specification.
To be judged by Arima Display Corporation. Color tone Color uniformity (1) On panel surface (2) On corner
X Y X Z t Y Z A

0.65

2.5

Chips (LCD panel)

t Y Z Z<=1/2t 1/2t<Z<=2t S: Seal area,

2.5

Y Not over viewing area Not exceed 1/3S

X X<=1/8A X<=1/8A

X is total length if there are 2 or more chips.

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 17
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com

No.

Item (3) On electrode pad

Criterion (4) Substrate protuberance

Y L Z X X a L

Zone AQL

Chips (LCD panel)

2.5
Y Y<=0.5 y Y<=L X X<=1/8A X X<=1/8A Z 0<Z<=t Z 0<Z<=t a a<=A b b<=1/3L

Light guide

Extensive crack is not acceptable. Criterion is same as No.1

2.5

10. Reliability Tests

This standard reliability test is done only for the first lot of MP products. Customer and supplier must hold a discussion if other reliability test is requested by customer.
No 1 Test Item High temperature and high humidity Under storage High temperature and high humidity Under operation High temperature under storage Low temperature under storage -20C 5 Thermal shock (under storage) 30min Test Condition 40C, 40C, 70C , -20C , 90%RH Sampling NG max 3 0

120hrs 90%RH

2 3 4

72hrs 120hrs 120hrs 60C 30min

3 3 3

0 0 0

25C 5min 1 cycle total 5 cycles

Drop test (Packing box with full samples inside)

(X,Y,Z) x2 total 6 directions drop from 1 meter to ground

1 box

Operation: Supply 3.3V for logic system and VLCD voltage for LCD module. Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 18
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com
11. PRECAUTIONS FOR OPERATION AND STORAGE
11.1 Precautions for Operation
(1) Since LCD panel is made of glass, in order to prevent from glass broken or color tone change, please do not apply any mechanical shock or impact or excessive force to it when installing the LCD module. (2) If LCD panel is broken and liquid crystal substance leaks out and contact your skin or clothes, please immediately wash it off by using soap and water. (3) The polarizer on the LCD surface is soft and easily scratched. Please be careful when handling. (4) If LCD surface becomes contaminated, please wipe it off gently by using moisten soft cloth with normal hexane, do not use acetone, ketone, ethanol, isopropyl alcohol or water. If there is saliva or water on the LCD surface, please wipe it off immediately. (5) When handling LCD module, please be sure that the body and the tools are properly grounded. And do not touch I/F pins with bare hands or contaminate I/F pins. (6) Do not attempt to disassemble or process the LCD module. (7) LCD module should be used under recommended operating conditions shown in chapter 6 and 7. (8) Response time will be extremely slower at lower temperature than at specified temperature and LCD will show different color when at higher temperature. The phenomenon will disappear when returning to specified condition. (9) Foggy dew, moisture condensation or water droplets deposited on surface and contact terminals will cause polarizer stain or damage, the deteriorated display quality and electrochemical reaction then leads to the shorter life time and permanent damage to the module probably. Please pay attention to the environmental temperature and humidity.

11.2 Precautions for Storage

(1) Please store LCD module in a dark place, avoid exposure to sunlight, the light of fluorescent lamp or any ultraviolet ray. (2) Keep the environment temperature at between 10C and 35C and at normal humidity. Avoid high temperature, high humidity or temperature below 0C. (3) That keeps the LCD modules stored in the container shipped from supplier before using them is recommended. (4) Do not leave any article on the LCD module surface for an extended period of time.

Display Corporation
This specification is the property of Arima

Module No. :
Display Corporation ,

MC75T01B
any copy or

Date: 2002.07.17
without

Ver.: 2 Page: 19
is prohibited.

reproduction

permission

www.SpecLcd.com

www.SpecLcd.com
12. Printing
12.1 Printing (on product)
Module No., Lot No., manufactory and the place of production will be printed on the rear of product as below. MC75T01B 2A15 ARIMA DISPLAY CORP. MADE IN TAIWAN

12.2 Lot No. Definition

Manufacture year 1: 2001 2: 2002 3: 2003 4: 2004 5: 2005

Manufacture month 1: Jan. 7: Jul. 2: Feb. 8: Aug. 3: Mar. 9: Sep. 4: Apr. A: Oct. 5: May. B: Nov. 6: Jun. C: Dec.

Manufacture Day 01 ~ 31

Display Corporation

Module No. :

MC75T01B

Date: 2002.07.17

Ver.: 2 Page: 20

This specification is the property of Arima Display Corporation , any copy or reproduction without permission is prohibited.

www.SpecLcd.com