Mark-10 Catalog-25
Uploaded by
ﺵﻓﻴﺮﺍ ﺭﺷﻲ ﺍﻧﺎMark-10 Catalog-25
Uploaded by
ﺵﻓﻴﺮﺍ ﺭﺷﻲ ﺍﻧﺎForce & Torque
Measurement Products
CATALOG 25
Force & Torque Measurement Engineered Better
About Mark-10
Mark-10 Corporation is a designer and manufacturer of force and torque measurement products. Since our
founding in 1979, our products have proven themselves in numerous applications at companies in the automotive,
medical device, plastics, textile, pharmaceutical, packaging, food, and virtually every other industry, worldwide.
Focus On Engineering
Founded in 1979 as an engineering consultancy, and branching out into
contract manufacturing in the 1980s, Mark-10 has focused on better engineering
and technical expertise from our very beginning. Having developed years of
expertise in force measurement, we developed our first force gauge in 1990.
Our product line has grown significantly since then, including indicators with
remote sensors, manual and motorized test stands, a full range of grips and
fixtures, along with software and accessories.
A Culture of Innovation
As an independent, family-run business, we are free to make decisions that
best serve our customers’ interests. Through frequent collaboration between
Engineering, Manufacturing, Marketing, and Sales, we keep a pulse on the
market, and address our customers’ needs with products which are elegant,
easy to use, and cost effective.
Integrated Manufacturing
Within the walls of our fully integrated Copiague, NY facility, a product often
starts out as a chat over a cup of coffee. Utilizing the latest in design technologies,
CNC machining, and a talented team of technicians and assemblers, product
ideas come to life. Technical support and customer service are just down the
hallway. With our team under one roof, customer questions and feedback are
addressed quickly and accurately.
2
Industries & Applications
Medical Device & Pharmaceutical
Needle penetration force Tubing connector pull-off force Adhesive strength of bandages
Tablet crush force Dental and bone screw torque Latex glove strength
Suture strength Stopcock torque Mask elastic band strength
Packaging peel force Catheter torque Disinfecting wipes strength
Syringe plunger force Luer lock torque
Automotive
witch activation force
S F
astener torque testing Bearing torque testing
Ergonomics / job task analysis Ignition switch torque Coefficient of friction testing
Rotary dial torque measurement Windshield wiper arm force
Torque tool calibration Turn signal stalk activation testing
Seat belt retraction force Wire terminal crimp pull testing
Job task analysis Spring testing
Springs
Extension spring testing Compression spring testing Torsion spring testing
Aerospace
Spring testing Passenger control button Cable tension testing
Wire terminal crimp pull testing activation force Tensile strength of materials
Force and torque testing of dials Bearing torque testing
and switches
Electronics
Switch force activation Component pull-off testing Keypad testing
PCB bend testing Component shear testing Connector insertion/withdrawal
Wire crimp pull testing Peel strength force
Packaging
90° peel testing of adhesive tapes Score bend testing Foil seal pull-off testing
T-peel tests of flexible packaging Bottle cap torque testing Sterilized packaging testing
materials Coefficient of friction testing
180° peel testing Top-load testing of bottles
Opening force testing and cartons
Ergonomics & Job Task Analysis
Pushing a wheelchair or cart Operating heavy machinery Lifting boxes
Loading and unloading boxes Muscle strength testing Pulling items from racks
Luggage / cargo handling Fitness assessment
Food and Beverage
Bottle cap torque testing Food texture analysis Burst testing
Bottle cap pull-off force testing Top load testing Crush testing
www.mark-10.com 3
Table of Contents
Force Gauges. . . . . . . . . . . . . . . . . . . . . . . . . 6 Grips & Attachments.. . . . . . . . . . . . . 66
Tensile / Pull. . . . . . . . . . . . . . . . . . . . . . . . 67
Packaging / Peel / Friction.. . . . . . . 69
Vise / Parallel Jaw. . . . . . . . . . . . . . . . . . 73
Torque Gauges.. . . . . . . . . . . . . . . . . . . . . 14 Wire / Rope / Yarn / Tubing.. . . . . . 75
Compression / Bend / Push. . . . . . 78
Torque / Force. . . . . . . . . . . . . . . . . . . . . . 82
Plug & Test® Basic Attachments & Adapters.. 84
Indicators & Sensors. . . . . . . . . . . . . . 18
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Hardware.. . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Wire Crimp Pull Testers. . . . . . . . . . 26
Calibration Kits. . . . . . . . . . . . . . . . . . . . . 93
Power & Communication.. . . . . . . . 94
Test Frame Accessories. . . . . . . . . . . 95
Ergonomics Gauges & Kits.. . . . . 28
Dimensional Drawings.. . . . . . . . . . 97
Force Gauges. . . . . . . . . . . . . . . . . . . . . . . 97
Ergonomics Force Gauges. . . . . . . 98
Manual Test Stands. . . . . . . . . . . . . . . 30 Torque Gauges. . . . . . . . . . . . . . . . . . . . . 99
Plug & Test®
Indicators & Sensors.. . . . . . . . . . . . . 101
Wire Crimp Pull Testers. . . . . . . . . . 106
Motorized Force Testers. . . . . . . . . 34
Manual Test Stands. . . . . . . . . . . . . . . 107
EasyMESUR®. . . . . . . . . . . . . . . . . . . . . . . . 37
Motorized Force Testers. . . . . . . . . 110
IntelliMESUR®.. . . . . . . . . . . . . . . . . . . . . . 48
Torque Testers. . . . . . . . . . . . . . . . . . . . . 112
Torque Testers. . . . . . . . . . . . . . . . . . . . . . 60
Software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
4
Configuring a Mark-10 System
Force Testing Systems
Test frame
Produces the force needed for the test. A test frame
eliminates much of the variability inherent in hand-
held testing with a force gauge. Motorized and manual
models are available.
Force sensor / gauge
Measures and displays the force produced on the test
sample. Ranges available from 0.12 to 500 lbF [0.5 N to
2.5 kN]. Accurate up to ±0.1% of full scale.
Control panel
For motorized test frames, choose from IntelliMESUR®
or EasyMESUR® integrated motion control and data
collection solutions.
Grips and attachments
Choose from a wide range of grips and attachments,
many designed for specific tests such as peel testing,
wire terminal testing, and more.
F305-IMT
Torque Testing Systems
Test stand
Produces the torque needed for the test. A test stand
eliminates much of the variability inherent in hand-held
testing with a torque gauge. Motorized and manual
models are available.
Torque indicator / gauge
Measures and displays the torque being produced on
the test sample. Choose a force/torque indicator with
Series R50 remote sensor, or the basic all-in-one TT03.
Several torque capacities are available. All mount to
Mark-10 torque test stands without the need for any
extra adapters.
Grips and attachments
Choose from a selection of grips and attachments,
designed for such applications as bottle cap torque
testing, fastener torque testing, and more.
TSTM-DC
www.mark-10.com 5
Force Gauges
Force Gauges
Mark-10 digital force gauges can be used in a virtually
limitless number of tension and compression testing
applications. All force gauges capture the peak force
in both tension and compression, and have selectable
units of measurement. Capacities are available from 50
gF full scale to 2,000 lbF. Gauges may be handheld or
used with a force test stand and gripping fixtures to
create a complete testing solution.
www.mark-10.com/force-gauges
6
Force Gauges
Series 7 Series 5
Professional Digital Force Gauges Advanced Digital Force Gauges
Series 7 professional digital force gauges are designed Series 5 premium digital force gauges feature a fast
with a number of sophisticated features for the most sampling rate of 7,000 Hz and ±0.1% accuracy. Additional
demanding tension and compression measurement advanced features such as averaging mode, external
applications, up to 500 lbF (2,500 N). The gauges feature trigger mode, password protection, and data memory for
±0.1% accuracy and a blazingly fast, industry-leading 1,000 readings make this flexible gauge series ideal for
sampling rate of 14,000 Hz, producing reliable results for a wide range of applications. Capacities up to 2,000 lbF
extremely quick-action tests. [10,000 N].
Features: Features:
High speed data capture and storage Communication with external devices
Capture and store up to 5,000 continuous data Full ASCII command set, allowing for communication
points at a rate of up to 14,000 readings per second. with a PC, PLC, or other device through USB or RS-
This unique function is ideal for capturing switch 232. Mitutoyo and analog outputs also included.
activation forces, sharp breaks, and other short-
duration applications. Averaging / external trigger modes
ddresses the need to record the average force over
A
Automatic data output / save / zero / time, useful in applications such as peel testing, while
I/O pin toggle external trigger mode makes switch activation testing
pon peak force detection. I/O pin toggle can stop a
U simple and accurate.
Mark-10 motorized test stand.
Data memory
Programmable footswitch command string 1 ,000-point data memory with statistics (min, max,
p to 3 functions may be specified, along with delays
U mean, standard deviation), and outputs.
between each function.
Password protection
Custom unit asswords may be set for calibration and for
P
user-defined unit multiplier may be programmed
A individual keys, designed to protect the gauge
for custom applications. against unauthorized changes.
1st / 2nd peak detection
For tensile testing and other applications.
www.mark-10.com 7
Force Gauges
Series 5 COF Series 4
Coefficient of Friction Gauges Advanced Digital Force Gauges
The M5-2-COF coefficient of friction (COF) gauge is an Series 4 advanced digital force gauges feature a sampling
integral part of a COF testing system, typically including rate of 3,000 Hz and ±0.2% accuracy, producing reliable,
a motorized test stand and COF fixture. With a capacity accurate results in a wide range of applications. Set point
of 2 lbF [10 N], the gauge can be used to measure friction indicators with outputs are ideal for pass/fail testing, while
for a wide range of materials, ideal for conformance to an analog load bar provides graphical representation
ASTM D1894 and other relevant standards. Static and of applied load. Data memory for 50 readings is also
kinetic coefficients are displayed on the backlit LCD, and provided, along with data communication capabilities.
are calculated from a user-programmable sled weight.
Features: Features:
Programmable sled weight Data outputs
he COF is calculated based on the sled weight,
T USB, RS-232, Mitutoyo, and analog outputs.
adjustable from 100 to 1,000 g, to conform to various
standards. A password can be set to protect settings Data memory
from unauthorized changes. 50-point data memory with statistics (min, max,
mean, standard deviation), and outputs.
Communication with external devices
ull ASCII command set, allowing for communication
F Set point indicators with outputs
with a PC, PLC, or other device through USB or RS- High, low, and in-range indicators and outputs are
232. Mitutoyo and analog outputs also included. activated according to programmed upper and lower
set points.
Data memory
1 ,000-point data memory with statistics (min, max, Analog load bar
mean, standard deviation), and outputs. Provides visual representation of applied load, and
helps provide feedback for an imminent overload
Password protection condition.
asswords may be set for calibration and for
P
individual keys, designed to protect the gauge
against unauthorized changes.
8
Force Gauges
Series 3 Series 2
Basic Digital Force Gauges Economical Digital Force Gauges
Series 3 basic digital force gauges feature a sampling Series 2 digital force gauges are designed for basic tension
rate of 2,000 Hz and ±0.3% accuracy, ideal for numerous and compression force testing applications up to 500 lbF
applications in virtually every industry. Set point indicators (2,500 N). Peak tension and compression readings are
are useful for visual pass/fail testing, while an analog load reliably captured via the gauges’ ±0.5% accuracy and
bar provides graphical representation of applied load. 500 Hz sampling rate. A backlit graphic LCD displays
Ultra-compact, reversible housing allows for flexibility in the current, peak tension, or peak compression reading.
many mounting configurations with space constraints. Features an ultra-compact, reversible housing.
Features: Features:
USB data output Peak capture
Continuous or individual readings may be output to a For compression and tension measurements.
PC through included USB output.
USB data output
Set point indicators Continuous or individual readings may be output to a
High, low, and in-range indicators are displayed PC through included USB output.
according to programmed upper and lower set
points. Battery or AC powered
Powered by a rechargeable battery or AC adapter.
Analog load bar
Provides visual representation of applied load, and Ultra-compact design
helps provide feedback for an imminent overload llows for flexibility in many mounting configurations.
A
condition. Reversible housing allows for hand-held use or test
stand mounting.
Ultra-compact design
llows for flexibility in many mounting configurations.
A
Reversible housing allows for hand-held use or test
stand mounting.
www.mark-10.com 9
Force Gauges
Specifications
Series 7 Series 5 Series 4
Professional Advanced Performance
Accuracy (% of full scale) ±0.1% ±0.2%
Sampling rate 14,000 Hz 7,000 Hz 3,000 Hz
Resolution 1/5,000 1/2,000
Outputs USB, RS-232, Mitutoyo, Analog
RS-232 Configurable up to 230,400 baud Configurable up to 115,200 baud
USB Configurable up to 230,400 baud Configurable up to 115,200 baud
Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices
Analog ±1 VDC, ±2% FS at capacity. Positive for compression, negative for tension
General purpose I/O Three open drain outputs, one input
Set point Three open drain lines
MESUR® Lite software included Yes
By pressing DATA button, or requesting from a PC
Data output functionality Automatic output or by pressing DATA button, or requesting from a PC or other device
or other device (currently displayed reading only)
ASCII command set for external control Full command set “?” only (request current reading)
Interface w/MESUR®gauge and MESUR® Lite Full communication Single point or continuous data output only
Limited to force data, overload protection,
Interface w/ESM303 / 750 / 1500 test stands Full communication, including PC control
and force set points
Data memory (readings, with output) 5,000 1,000 50
Data memory deletion Any individual data point, or clear all
Statistic calculations and output to PC Max, min, mean, std. dev., number of readings, with output
Break detection Yes* No
1st / 2nd peak detection Yes* No
Programmable footswitch command string Yes No
Averaging mode Yes* Yes No
External trigger mode Yes** Yes No
Analog load bar graph shown on display Yes
Set points (for pass / fail indication) Yes with high / low indicators, markers on analog bar graph, and outputs
Password protection Yes, for calibration and individual keys No
Peak readings always displayed Yes
Programmable audible tones Yes
Calibration procedure Configurable number of data points (up to 10 in each direction)
Overload outputs Dedicated pins for tension and compression
Battery life Rechargeable. Backlight on: up to 7 hours of continuous use / Backlight off: up to 24 hours of continuous use
Units of measurement lbF, ozF, gF, kgF, N, kN, mN (depending on model)
Safe overload 150% of full scale (display shows warning at 110% and above)
M5-012 - M5-100: 1.0 [0.45]
M7-012 - M7-100: 1.0 [0.45] M4-012 - M4-100: 1.0 [0.45]
Weight (lb [kg]) M5-200 - M5-500: 1.2 [0.54]
M7-200 - M7-500: 1.2 [0.54] M4-200 - M4-500: 1.2 [0.54]
M5-750 - M5-2000: 1.8 [0.82]
Carrying case, chisel, cone, V-groove, hook, flat, extension rod, universal voltage AC adapter/charger, rechargeable battery,
Included items quick-start guide, USB cable, NIST-traceable certificate of calibration with data. Download free MESUR® Lite or MESUR®gauge Plus demo
period at www.mark-10.com/software.
* With configurable automatic data output, data storage, and zero function upon event completion. Can also stop travel of certain motorized test stands.
** Can stop certain legacy motorized test stands upon event completion.
10
Force Gauges
Series 3 Series 2
Basic Economical
±0.3% ±0.5% Accuracy (% of full scale)
2,000 Hz 500 Hz Sampling rate
1/1,000 Resolution
USB USB Outputs
No N/A RS-232
Configurable up to 115,200 baud N/A USB
No N/A Mitutoyo (Digimatic)
No N/A Analog
No N/A General purpose I/O
No N/A Set point
Yes N/A MESUR® Lite software included
By pressing DATA button, or requesting from a PC or other device (currently displayed reading only) Data output functionality
“?” only (request current reading) ASCII command set for external control
Single point or continuous data output only Interface w/MESUR®gauge and MESUR® Lite
No No Interface w/ESM303 / 750 / 1500 test stands
No Data memory (readings, with output)
N/A Data memory deletion
N/A Statistic calculations and output to PC
No Break detection
No 1st / 2nd peak detection
No Programmable footswitch command string
No No Averaging mode
No No External trigger mode
Yes No Analog load bar graph shown on display
Yes with high/low indicators, markers on analog bar graph, no output No Set points (for pass / fail indication)
No Password protection
Yes No (Peak mode must be selected) Peak readings always displayed
Yes No Programmable audible tones
Configurable number of data points (up to 10 in each direction) Calibration procedure
No No Overload outputs
Rechargeable. Backlight on: up to 7 hours of continuous use / Backlight off: up to 24 hours of continuous use Battery life
lbF, gF, kgF, N (depending on model) lbF, kgF, N Units of measurement
150% of full scale (display shows warning at 110% and above) Safe overload
M3-012 - M3-100: 0.7 [0.33] M2-2 - M2-100: 0.7 [0.33]
Weight (lb [kg])
M3-200 - M3-500: 0.9 [0.41] M2-200 - M2-500: 0.9 [0.41]
Carrying case, chisel, cone, V-groove, hook, flat, extension rod,
universal voltage AC adapter/charger, rechargeable battery, Carrying case, rechargeable battery, quick-start guide, USB cable,
quick-start guide, USB cable, NIST-traceable certificate of certificate of conformance. Download free MESUR® Lite or Included items
calibration without data. Download free MESUR® Lite or MESUR®gauge Plus demo period at www.mark-10.com/software.
MESUR®gauge Plus demo period at www.mark-10.com/software.
www.mark-10.com 11
Force Gauges
Ordering Information
Capacity x Resolution
Model No.
lbF ozF kgF gF N kN mN
M7-012 0.12 x 0.00002 2 x 0.0005 - 50 x 0.01 0.5 x 0.0001 - 500 x 0.1
M7-025 0.25 x 0.00005 4 x 0.001 - 100 x 0.02 1 x 0.0002 - 1000 x 0.2
M7-05 0.5 x 0.0001 8 x 0.002 - 250 x 0.05 2.5 x 0.0005 - 2500 x 0.5
M7-2 2 x 0.0005 32 x 0.01 1 x 0.0002 1000 x 0.2 10 x 0.002 - -
M7-5 5 x 0.001 80 x 0.02 2.5 x 0.0005 2500 x 0.5 25 x 0.005 - -
Series 7
M7-10 10 x 0.002 160 x 0.05 5 x 0.001 5000 x 1 50 x 0.01 - -
M7-20 20 x 0.005 320 x 0.1 10 x 0.002 10000 x 2 100 x 0.02 - -
M7-50 50 x 0.01 800 x 0.2 25 x 0.005 25000 x 5 250 x 0.05 - -
M7-100 100 x 0.02 1600 x 0.5 50 x 0.01 50000 x 10 500 x 0.1 - -
M7-200 200 x 0.05 3200 x 1 100 x 0.02 - 1000 x 0.2 1 x 0.0002 -
M7-500 500 x 0.1 8000 x 2 250 x 0.05 - 2500 x 0.5 2.5 x 0.0005 -
M5-012 0.12 x 0.00002 2 x 0.0005 - 50 x 0.01 0.5 x 0.0001 - 500 x 0.1
M5-025 0.25 x 0.00005 4 x 0.001 - 100 x 0.02 1 x 0.0002 - 1000 x 0.2
M5-05 0.5 x 0.0001 8 x 0.002 - 250 x 0.05 2.5 x 0.0005 - 2500 x 0.5
M5-2 2 x 0.0005 32 x 0.01 1 x 0.0002 1000 x 0.2 10 x 0.002 - -
M5-5 5 x 0.001 80 x 0.02 2.5 x 0.0005 2500 x 0.5 25 x 0.005 - -
M5-10 10 x 0.002 160 x 0.05 5 x 0.001 5000 x 1 50 x 0.01 - -
M5-20 20 x 0.005 320 x 0.1 10 x 0.002 10000 x 2 100 x 0.02 - -
M5-50 50 x 0.01 800 x 0.2 25 x 0.005 25000 x 5 250 x 0.05 - -
Series 5
M5-100 100 x 0.02 1600 x 0.5 50 x 0.01 50000 x 10 500 x 0.1 - -
M5-200 200 x 0.05 3200 x 1 100 x 0.02 - 1000 x 0.2 1 x 0.0002 -
M5-300 300 x 0.1 4800 x 2 150 x 0.05 - 1500 x 0.5 1.5 x 0.0005 -
M5-500 500 x 0.1 8000 x 2 250 x 0.05 - 2500 x 0.5 2.5 x 0.0005 -
M5-750 750 x 0.5 12000 x 10 375 x 0.2 - 3750 x 2 3.75 x 0.002 -
M5-1000 1000 x 0.5 16000 x 5 500 x 0.2 - 5000 x 2 5 x 0.002 -
M5-1500 1500 x 1 24000 x 20 750 x 0.5 - 7500 x 5 7.5 x 0.005 -
M5-2000 2000 x 1 32000 x 20 1000 x 0.5 - 10000 x 5 10 x 0.005 -
M4-012 0.12 x 0.00005 2 x 0.001 - 50 x 0.02 0.5 x 0.0002 - 500 x 0.2
M4-025 0.25 x 0.0001 4 x 0.002 - 100 x 0.05 1 x 0.0005 - 1000 x 0.5
M4-05 0.5 x 0.0002 8 x 0.005 - 250 x 0.1 2.5 x 0.001 - 2500 x 1
M4-2 2 x 0.001 32 x 0.02 1 x 0.0005 1000 x 0.5 10 x 0.005 - -
M4-5 5 x 0.002 80 x 0.05 2.5 x 0.001 2500 x 1 25 x 0.01 - -
Series 4
M4-10 10 x 0.005 160 x 0.1 5 x 0.002 5000 x 2 50 x 0.02 - -
M4-20 20 x 0.01 320 x 0.2 10 x 0.005 10000 x 5 100 x 0.05 - -
M4-50 50 x 0.02 800 x 0.5 25 x 0.01 25000 x 10 250 x 0.1 - -
M4-100 100 x 0.05 1600 x 1 50 x 0.02 50000 x 20 500 x 0.2 - -
M4-200 200 x 0.1 3200 x 2 100 x 0.05 - 1000 x 0.5 1 x 0.0005 -
M4-500 500 x 0.2 8000 x 5 250 x 0.1 - 2500 x 1 2.5 x 0.001 -
12
Force Gauges
Capacity x Resolution
Model No.
lbF kgF gF N
M3-012 0.12 x 0.0001 - 50 x 0.05 0.5 x 0.0005
M3-025 0.25 x 0.0002 - 100 x 0.1 1 x 0.001
M3-05 0.5 x 0.0005 - 250 x 0.2 2.5 x 0.002
M3-2 2 x 0.002 1 x 0.001 - 10 x 0.01
M3-5 5 x 0.005 2.5 x 0.002 - 25 x 0.02
Series 3
M3-10 10 x 0.01 5 x 0.005 - 50 x 0.05
M3-20 20 x 0.02 10 x 0.01 - 100 x 0.1
M3-50 50 x 0.05 25 x 0.02 - 250 x 0.2
M3-100 100 x 0.1 50 x 0.05 - 500 x 0.5
M3-200 200 x 0.2 100 x 0.1 - 1000 x 1
M3-500 500 x 0.5 250 x 0.2 - 2500 x 2
M2-2 2 x 0.002 1 x 0.001 - 10 x 0.01
M2-5 5 x 0.005 2.5 x 0.002 - 25 x 0.02
M2-10 10 x 0.01 5 x 0.005 - 50 x 0.05
M2-20 20 x 0.02 10 x 0.01 - 100 x 0.1
Series 2
M2-50 50 x 0.05 25 x 0.02 - 250 x 0.2
M2-100 100 x 0.1 50 0.05 - 500 x 0.5
M2-200 200 x 0.2 100 x 0.1 - 1000 x 1
M2-500 500 x 0.5 250 x 0.2 - 2500 x 2
All models include 110V AC adapters
Add suffix ‘E’ for euro plug (220V),‘U’ for UK plug (220V) or ‘A’ for Australian plug (220V)
Example: M5-05E, M3-20U, M2-100A
www.mark-10.com 13
Torque Gauges
www.mark-10.com/torque-gauges
Series TT01 Series TT02
Cap Torque Testers Torque Tool Testers
Series TT01 cap torque testers provide closure Series TT02 torque tool testers present a simple yet
manufacturers, bottlers, and food and beverage accurate solution for testing torque screwdrivers,
companies an accurate and simple way to measure wrenches, and other tools. The TT02 features a solid
application and removal torques. Adjustable posts grip aluminum housing, making it rugged enough for many
a broad range of container shapes and sizes, while sets years of service in production or laboratory use, while
of optional jaws are available as an alternative gripping a universal receptacle with square drive and grooves
methods. Peak torque readings are always shown on the accepts common bits and attachments. 1st / 2nd peak
large, backlit graphic display. detection is provided for click-type tools.
Features: Features:
USB, RS-232, Mitutoyo, and analog outputs USB, RS-232, Mitutoyo, and analog outputs
Data memory Data memory
1,000-point data memory with statistics (min, max, 1,000-point data memory with statistics (min, max,
mean, standard deviation), and outputs. mean, standard deviation), and outputs.
Set point indicators with outputs Set point indicators with outputs
Convenient for pass/fail testing. Convenient for pass/fail testing.
Automatic data output / save / zero Automatic data output / save / zero
Upon peak torque detection. Upon peak torque detection.
1st / 2nd peak detection 1st / 2nd peak detection
For slip and breakaway torques in tamper-evident For slip and breakaway torques in tamper-evident
closures. closures.
14
Torque Gauges
Series TT03 Series TT05
Torque Gauges Torque Testers
Series TT03 digital torque gauges are designed for Series TT05 universal torque testers can be used for
clockwise and counter-clockwise torque testing a range of applications up to 100 lbFin [11.5 Nm]. The
applications in virtually every industry, with capacities stainless steel loading surface features a matrix of
from 10 ozFin to 100 lbFin (7 to 1,150 Ncm). A dedicated threaded holes, ideal for accommodating specialized
remote torque sensor with Jacobs chuck can be used to fixtures and attachments. The testers’ rugged design and
grip a sample, bit, or fixture. The gauges’ rugged aluminum simple, intuitive operation allow for use in laboratory and
housing allows for hand-held use or test stand mounting production environments. Technical specifications and
for more sophisticated testing requirements. functionality are the same as with Series TT01.
Features: Features:
Rugged, compact design Stainless steel loading plate with threaded holes
Indicator and remote sensor with Jacobs chuck. Can Accommodates specialized fixtures and attachments.
be hand-held or mounted to a test stand.
USB, RS-232, Mitutoyo, and analog outputs
USB data output Data memory
Continuous or individual readings may be output to a 1,000-point data memory with statistics (min, max,
PC through included USB output. mean, standard deviation), and outputs.
Set point indicators Set point indicators with outputs
High, low, and in-range indicators are displayed Convenient for pass/fail testing.
according to programmed upper and lower set
points. Automatic data output / save / zero
Analog load bar Upon peak torque detection.
rovides visual representation of applied load, and
P
helps provide feedback for an imminent overload
condition.
www.mark-10.com 15
Torque Gauges
Specifications
TT01 TT05 TT02 TT03
Accuracy (% of full scale) ±0.3% ±0.3% ±0.3% ±0.5%
Password protection Yes No
Sampling rate 7,000 Hz 2,000 Hz
Resolution 1/1,000
Outputs USB, RS-232 Mitutoyo, Analog USB
USB / RS-232 Configurable up to 115,200 baud
Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices N/A
Analog ±1 VDC, ±2% FS. + for compression / CW, - for tension / CCW N/A
General purpose I/O Three open drain outputs, one input N/A
Set point Yes, three open drain lines No
MESUR® Lite software included Yes
Communication with MESUR®gauge
Single point or continuous data, send from gauge or request from software
and MESUR® Lite software
Data memory 1,000 readings, with output No
Data memory deletion Individual data points, or clear all N/A
Statistics calculations Max, min, mean, std. dev., number of readings, with output N/A
Analog load bar graph shown on display Yes
Keypad password protection Yes, for calibration and keys No
Peak readings calculated Yes
Break detection* Yes No
1st / 2nd peak detection* Yes No
Programmable audible tones Yes
No. of units of measurement 5 3
Battery life (with backlight on/off) Backlight on: up to 7 hours of continuous use, Backlight off: up to 24 hours of continuous use
Safe overload 150% of full scale (display shows “OVER” at 110% and above)
Weight (lb [kg]) 8.4 [3.8] 10.9 [4.9] 5.8 [2.6] 1.8 [0.8]
1/4” hex to 3/8” square adapter (TT02 Only), carrying case (TT03 only) universal voltage AC adapter, battery, quick-start guide,
Included items
and certificate of calibration. Download free MESUR® Lite or MESUR® Gauge demo period at mark-10.com/software.
* With configurable automatic data output, data storage, and zero function upon detection of peak value(s).
16
Torque Gauges
Ordering Information
Capacity x Resolution
Model No.
ozFin lbFin kgFcm kgFmm Ncm Nm
MTT01-12 192 x 0.1 12 x 0.005 14 x 0.01 - 135 x 0.1 1.35 x 0.001
MTT01-25 400 x 0.2 25 x 0.01 28 x 0.02 - 290 x 0.2 2.9 x 0.002
TT01
MTT01-50 800 x 0.5 50 x 0.02 58 x 0.05 - 570 x 0.5 5.7 x 0.005
MTT01-100 1600 x 1 100 x 0.05 116 x 0.1 - 1150 x 1 11.5 x 0.01
MTT02-12 192 x 0.1 12 x 0.005 14 x 0.01 - 135 x 0.1 1.35 x 0.001
MTT02-25 400 x 0.2 25 x 0.01 28 x 0.02 - 290 x 0.2 2.9 x 0.002
TT02
MTT02-50 800 x 0.5 50 x 0.02 58 x 0.05 - 570 x 0.5 5.7 x 0.005
MTT02-100 1600 x 1 100 x 0.05 116 x 0.1 - 1150 x 1 11.5 x 0.01
MTT03-10Z 10 x 0.01 - - 7 x 0.005 7 x 0.005 -
MTT03-20Z 20 x 0.02 - - 14 x 0.01 14 x 0.01 -
MTT03-50Z 50 x 0.05 - - 36 x 0.05 36 x 0.05 -
TT03
MTT03-12 192 x 0.2 12 x 0.01 - - 135 x 0.1 -
MTT03-50 800 x 1 50 x 0.05 - - 570 x 0.5 -
MTT03-100 1600 x 2 100 x 0.1 - - 1150 x 1 -
MTT05-12 192 x 0.1 12 x 0.005 14 x 0.01 - 135 x 0.1 1.35 x 0.001
MTT05-25 400 x 0.2 25 x 0.01 28 x 0.02 - 290 x 0.2 2.9 x 0.002
TT05
MTT05-50 800 x 0.5 50 x 0.02 58 x 0.05 - 570 x 0.5 5.7 x 0.005
MTT05-100 1600 x 1 100 x 0.05 58 x 0.05 - 1150 x 1 11.5 x 0.01
All models include 110V AC adapters
Add suffix ‘E’ for euro plug (220V),‘U’ for UK plug (220V) or ‘A’ for Australian plug (220V)
Example: MTT01-50E, MTT02-100U, MTT03-50ZA
www.mark-10.com 17
Plug & Test Indicators and Sensors
www.mark-10.com/indicators-sensors
Measure force and torque
with interchangeable indicators and remote sensors
Models M7I, M5I, and M3I force / torque indicators are designed for use with
Mark-10’s Plug & Test ® remote force and torque sensors. All calibration and
configuration data is saved within the sensors’ smart connectors - not the
indicator - allowing for true interchangeability. Each sensor series is available
in a range of capacities, from 0.25 to 10,000 lbF (1 N to 50 kN) full scale and
from 10 ozFin to 5,000 lbFin (7 Ncm to 550 Nm) full scale. Sensor details are
provided on the following pages.
5
1
6
2
Model M7I Model M5I
Professional Advanced
4 Indicator Indicator
9
10
Model M3I
Basic
Indicator
18
Plug & Test Indicators and Sensors
Torque Sensors Force Sensors
1 Series R50 5 Series R01
Universal torque sensors, fixed chuck Tension / compression sensors
Measure bidirectional torque for a wide variety of Rugged sensor series for measuring tensile and
applications. Contain a chuck for up to 1/2” diameter compressive force of up to 10,000 lbF [50 kN].
samples. Sensors can be used as hand held devices, Durable S-beam design with thread on two sides.
or mounted to a torque test stand. Capacities
available from 10 ozFin to 100 lbFin [7 to 1,150 Ncm]. 6 Series R03
Inline tension / compression sensors
2 Series R51
Universal torque sensors, interchangeable chucks Measure tensile and compressive loads for a wide
variety of applications, available in capacities from
A great solution for general bidirectional torque 0.25 lbF to 100 lbF [1 to 500 N]. Thread on two sides
testing applications with several different sample can accept a variety of hooks and implements,
sizes. Three interchangeable chuck capacities and making this sensor series particularly well suited for
bit holder are available. The R51 has super overload inline tests.
protection and is available in capacities from 10 ozFin
to 100 lbFin [7 to 1,150 Ncm]. 7 Series R04
Miniature tension / compression sensors
3 Series R55
Wrench extension torque sensors Extremely compact force measurement sensors for
tensile and compressive loads in applications with
Convert any wrench to a torque tool with this sensor limited space. Capacities available from 0.25 lbF to
series, or use it as a component of a torque testing 100 lbF. [1 to 500 N] The sensors include threaded
system. Capacities available from 20 to 5,000 lbFin holes on two sides for the mounting of attachments.
[220 Ncm to 550 Nm].
8 Series R02
4 Series R52 Compact compression sensors
Static torque sensors
Button type sensors for compressive loads of up to
Calibrate torque tools with these sensors, or use them 10,000 lbF [50 kN]. Compact, rugged, and ideal for
as components of a torque testing system. Tapped heavy duty applications with space constraints.
holes on every surface allow for easy mounting to a
work bench or fixture. Capacities available from 10 9 Series R05
ozFin to 100 lbFin [7 to 1,150 Ncm]. Pull / tension sensor
Fully enclosed force sensor for tension and
compression testing. Useful in ergonomics testing,
workplace safety testing, and general lifting or
push/pull requirements. For up to 500 lbF [2,500 N]
of force.
10 Series R06
Wire crimp pull sensor
Hand-operated solution for wire crimp pull-off force
measurement. Ergonomic handles and convenient
tensioning mechanism ideal for field measurements
up to 200 lbF [1 kN].
www.mark-10.com 19
Plug & Test Indicators and Sensors
Specifications - Force and Torque Indicators
Model M7I Model M5I Model M3I
Professional Advanced Basic
Accuracy (% of full scale) ±0.1 + sensor ±0.2% + sensor
Sensor password protection Yes No
Sampling rate 14,000 Hz 7,000 Hz 2,000 Hz
Resolution 1/2,000 or 1/1,000, depending on sensor 1/1,000
Outputs USB, RS-232, Mitutoyo, Analog USB
RS-232 Configurable up to 230,400 baud Configurable up to 115,200 baud No
USB Configurable up to 230,400 baud Configurable up to 115,200 baud
Mitutoyo (Digimatic) Serial BCD suitable for all Mitutoyo SPC-compatible devices No
Analog ±1 VDC, ±2% FS, + for compression / CW, - for tension / CCW No
General purpose I/O Three open drain outputs, one input No
Set point Three open drain lines No
MESUR Lite software included
®
Yes
By pressing DATA button, or requesting from
Automatic output or by pressing DATA button,
Data output functionality a PC or other device
or requesting from a PC or other device
(currently displayed reading only)
ASCII command set for external control Full command set “?” only (request current reading)
Communication with MESUR gauge and
®
Send single reading from gauge only,
Full communication
MESUR® Lite software cannot request from software
Communication with ESM301 test stand and
Full communication, including PC control No
Series DC test stand controllers
Data memory 5,000 readings, with output 1,000 readings, with output No
Data memory deletion Individual data points, or clear all N/A
Statistics calculations and output to PC Max, min, mean, std. dev., number of readings, with output No
Break detection Yes* No
1st / 2nd peak detection Yes* No
Programmable footswitch command string Yes* No
Averaging mode Yes* Yes No
External trigger mode Yes** Yes No
Analog load bar graph shown on display Yes
Set points (for pass/fail indication) Yes, with high/low indicators
Keypad password protection Yes, for calibration and keys No
Peak readings always displayed Yes
Programmable audible tones Yes
Calibration procedure Configurable number of data points (up to 10 in each direction)
Overload outputs Dedicated pins for tension and compression No
No. of units of measurement 5 3
Battery life (with backlight on/off) Up to 7 hours of continuous use / Up to 24 hours of continuous use
Weight 0.7 lb [0.3 kg]
Carrying case, universal voltage AC adapter, battery, quick-start guide, USB cable, and certificate of conformance.
Included items
Download free MESUR® Lite or MESUR® Gauge demo period at mark-10.com/software.
* With configurable automatic data output, data storage, and zero function upon event completion. Can also stop travel of certain motorized test stands.
** Can stop travel of certain motorized test stands upon event completion.
20
Plug & Test Indicators and Sensors
Ordering Information - Force Sensors
Accuracy *
Capacity x Resolution - with Model 7I & 5I indicators Capacity x Resolution - with Model 3I indicator
Overload
(±% FS)
Safe
Model No.
lbF ozF gF kgF N kN lbF kgF N kN
MR01-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - 50 x 0.05 25 x 0.02 250 x 0.2 -
MR01-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - 100 x 0.1 50 x 0.05 500 x 0.5 -
MR01-200 200 x 0.1 3200 x 2 - 100 x 0.05 1000 x 0.5 1 x 0.0005 200 x 0.2 100 x 0.1 1000 x 1 -
MR01-300 300 x 0.2 4800 x 5 - 150 x 0.1 1500 x 1 1.5 x 0.001 300 x 0.5 150 x 0.2 1500 x 2 -
MR01-500 500 x 0.2 8000 x 5 - 250 x 0.1 2500 x 1 2.5 x 0.001 500 x 0.5 250 x 0.2 2500 x 2 -
R01**
0.15% 150%
MR01-1000 1000 x 0.5 16000 x 10 - 500 x 0.2 5000 x 2 5 x 0.002 1000 x 1 500 x 0.5 5000 x 5 -
MR01-1500 1500 x 1 24000 x 20 - 750 x 0.5 7500 x 5 7.5 x 0.005 1500 x 2 750 x 1 7500 x 10 -
MR01-2000 2000 x 1 32000 x 20 - 1000 x 0.5 10000 x 5 10 x 0.005 2000 x 2 1000 x 1 10000 x 10 -
MR01-5000 5000 x 2 - - 2500 x 1 25000 x 10 25 x 0.01 5000 x 5 2500 x 2 - 25 x 0.02
MR01-10000 10000 x 5 - - 5000 x 2 50000 x 25 50 x 0.02 10000 x 10 5000 x 5 - 50 x 0.05
MR02-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - 100 x 0.1 50 x 0.05 500 x 0.5 -
MR02-200 200 x 0.1 3200 x 2 - 100 x 0.05 1000 x 0.5 1 x 0.0005 200 x 0.2 100 x 0.1 1000 x 1 -
MR02-500 500 x 0.2 8000 x 5 - 250 x 0.1 2500 x 1 2.5 x 0.001 500 x 0.5 250 x 0.2 2500 x 2 -
R02
MR02-1000 1000 x 0.5 16000 x 10 - 500 x 0.2 5000 x 2 5 x 0.002 1000 x 1 500 x 0.5 5000 x 5 - 0.5% 150%
MR02-2000 2000 x 1 32000 x 20 - 1000 x 0.5 10000 x 5 10 x 0.005 2000 x 2 1000 x 1 10000 x 10 -
MR02-5000 5000 x 2 - - 2500 x 1 25000 x 10 25 x 0.01 5000 x 5 2500 x 2 - 25 x 0.02
MR02-10000 10000 x 5 - - 5000 x 2 50000 x 25 50 x 0.02 10000 x 10 5000 x 5 - 50 x 0.05
MR03-025 0.25 x 0.0001 4 x 0.002 100 x 0.05 - 1 x 0.0005 1000 x 0.5 mN 0.25 x 0.0002 100 x 0.1 gF 1 x 0.001 -
MR03-05 0.5 x 0.0002 8 x 0.005 250 x 0.1 - 2.5 x 0.001 2500 x 1 mN 0.5 x 0.0005 250 x 0.2 gF 2.5 x 0.002 - 200%
MR03-2 2 x 0.001 32 x 0.02 1000 x 0.5 1 x 0.0005 10 x 0.005 - 2 x 0.002 1 x 0.001 10 x 0.01 -
MR03-5 5 x 0.002 80 x 0.05 2500 x 1 2.5 x 0.001 25 x 0.01 - 5 x 0.005 2.5 x 0.002 25 x 0.02 -
R03**
0.15%
MR03-10 10 x 0.005 160 x 0.1 5000 x 2 5 x 0.002 50 x 0.02 - 10 x 0.01 5 x 0.005 50 x 0.05 -
MR03-20 20 x 0.01 320 x 0.2 10000 x 5 10 x 0.005 100 x 0.05 - 20 x 0.02 10 x 0.01 100 x 0.1 - 150%
MR03-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - 50 x 0.05 25 x 0.02 250 x 0.2 -
MR03-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - 100 x 0.1 50 x 0.05 500 x 0.5 -
MR04-025 0.25 x 0.0001 4 x 0.002 100 x 0.05 - 1 x 0.0005 1000 x 0.5 mN 0.25 x 0.0002 100 x 0.1 gF 1 x 0.001 -
MR04-05 0.5 x 0.0002 8 x 0.005 250 x 0.1 - 2.5 x 0.001 2500 x 1 mN 0.5 x 0.0005 250 x 0.2 gF 2.5 x 0.002 -
MR04-2 2 x 0.001 32 x 0.02 1000 x 0.5 1 x 0.0005 10 x 0.005 - 2 x 0.002 1 x 0.001 10 x 0.01 -
MR04-5 5 x 0.002 80 x 0.05 1000 x 0.5 2.5 x 0.001 25 x 0.01 - 5 x 0.005 2.5 x 0.002 25 x 0.02 -
R04
0.2% 200%
MR04-10 10 x 0.005 160 x 0.1 5000 x 2 5 x 0.002 50 x 0.02 - 10 x 0.01 5 x 0.005 50 x 0.05 -
MR04-20 20 x 0.01 320 x 0.2 10000 x 5 10 x 0.005 100 x 0.05 - 20 x 0.02 10 x 0.01 100 x 0.1 -
MR04-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - 50 x 0.05 25 x 0.02 250 x 0.2 -
MR04-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - 100 x 0.1 50 x 0.05 500 x 0.5 -
R05
MR05-500 500 x 0.2 8000 x 5 - 250 x 0.1 2500 x 1 2.5 x 0.001 500 x 0.5 250 x 0.2 2500 x 2 - 0.15% 150%
R06
MR06-200 200 x 0.1 3200 x 2 - 100 x 0.05 1000 x 0.5 1 x 0.0005 200 x 0.2 100 x 0.1 1000 x 1 - 0.5% 150%
All sensors include a Plug & Test® connector for interfacing directly with an M7I, M5I or M3I indicator. NIST-traceable certificate of calibration with data is also included.
* Accuracy refers to the sensor only. Total accuracy includes the indicator’s accuracy (±0.1% or ±0.2%). For example, the total accuracy of the MR50-50 sensor
with M5I indicator equals ±0.35% + ±0.1% = ±0.45% FS.
** Add suffix “-1” for shortened cable, for use on ESM303(H), ESM750, and ESM1500 test stands. Ex: MR01-1000-1. Test stand mounting hardware is included.
www.mark-10.com 21
Plug & Test Indicators and Sensors
Ordering Information - Torque Sensors
Capacity x Resolution Capacity x Resolution
Accuracy *
Overload
with Model M7I & M5I indicators with Model M3I indicator
(±% FS)
Safe
Model No.
ozFin lbFin lbFft gFcm kgFmm Nmm Ncm Nm ozFin lbFin kgFmm Ncm
MR50-10Z 10 x 0.005 - - 700 x 0.5 7 x 0.005 70 x 0.05 7 x 0.005 - 10 x 0.01 - 7 x 0.005 7 x 0.005
MR50-20Z 20 x 0.01 - - 1400 x 1 14 x 0.01 140 x 0.1 14 x 0.01 - 20 x 0.02 - 14 x 0.01 14 x 0.01 300%
MR50-50Z 50 x 0.02 - - 3600 x 2 36 x 0.02 350 x 0.2 35 x 0.02 - 50 x 0.05 - 36 x 0.05 35 x 0.05
R50
0.35%
MR50-12 192 x 0.1 12 x 0.005 1 x 0.0005 - - - 135 x 0.1 1.35 x 0.001 192 x 0.2 12 x 0.01 - 135 x 0.1
MR50-50 800 x 0.5 50 x 0.02 4 x 0.002 - - - 570 x 0.5 5.7 x 0.005 800 x 1 50 x 0.05 - 570 x 0.5 150%
MR50-100 1600 x 1 100 x 0.05 8 x 0.005 - - - 1150 x 1 11.5 x 0.01 1600 x 2 100 x 0.1 - 1150 x 1
MR51-10Z 10 x 0.005 - - 700 x 0.5 7 x 0.005 70 x 0.05 7 x 0.005 - 10 x 0.01 - 7 x 0.005 7 x 0.005
MR51-20Z 20 x 0.01 - - 1400 x 1 14 x 0.01 140 x 0.1 14 x 0.01 - 20 x 0.02 - 14 x 0.01 14 x 0.01 300%
MR51-50Z 50 x 0.02 - - 3600 x 2 36 x 0.02 350 x 0.2 35 x 0.02 - 50 x 0.05 - 36 x 0.05 35 x 0.05
0.15%
R51
MR51-12 192 x 0.1 12 x 0.005 1 x 0.0005 - - - 135 x 0.1 1.35 x 0.001 192 x 0.2 12 x 0.01 - 135 x 0.1
MR51-50 800 x 0.5 50 x 0.02 4 x 0.002 - - - 570 x 0.5 5.7 x 0.005 800 x 1 50 x 0.05 - 570 x 0.5 150%
MR51-100 1600 x 1 100 x 0.05 8 x 0.005 - - - 1150 x 1 11.5 x 0.01 1600 x 2 100 x 0.1 - 1150 x 1
MR52-10Z 10 x 0.005 - - 700 x 0.5 7 x 0.005 70 x 0.05 7 x 0.005 - 10 x 0.01 - 7 x 0.005 7 x 0.005
MR52-20Z 20 x 0.01 - - 1400 x 1 14 x 0.01 140 x 0.1 14 x 0.01 - 20 x 0.02 - 14 x 0.01 14 x 0.01 300%
MR52-50Z 50 x 0.02 - - 3600 x 2 36 x 0.02 350 x 0.2 35 x 0.02 - 50 x 0.05 - 36 x 0.05 35 x 0.05
R52
0.35%
MR52-12 192 x 0.1 12 x 0.005 1 x 0.0005 - - - 135 x 0.1 1.35 x 0.001 192 x 0.2 12 x 0.01 - 135 x 0.1
MR52-50 800 x 0.5 50 x 0.02 4 x 0.002 - - - 570 x 0.5 5.7 x 0.005 800 x 1 50 x 0.05 - 570 x 0.5 150%
MR52-100 1600 x 1 100 x 0.05 8 x 0.005 - - - 1150 x 1 11.5 x 0.01 1600 x 2 100 x 0.1 - 1150 x 1
MR55 -20 320 x 0.5 20 x 0.02 1.5 x 0.002 - - - 220 x 0.2 2 x 0.002 320 x 0.5 20 x 0.02 - 220 x 0.2
MR55-50 800 x 1 50 x 0.05 4 x 0.005 - - - 570 x 0.5 5.7 x 0.005 800 x 1 50 x 0.05 - 570 x 0.5
MR55-100 1600 x 2 100 x 0.1 8 x 0.01 - - - 1150 x 1 11.5 x 0.01 1600 x 2 100 x 0.1 - 1150 x 1
MR55-200 - 200 x 0.2 16 x 0.02 - 2300 x 2 - 2200 x 2 22 x 0.02 - 200 x 0.2 2300 x 2 2200 x 2
R55
0.6% 150%
MR55-400 - 400 x 0.5 32 x 0.05 - 4600 x 5 - 4500 x 5 45 x 0.05 - 400 x 0.5 4600 x 5 4500 x 5
MR55-1000 - 1000 x 1 80 x 0.1 - 11500 x 10 - 11000 x 10 110 x 0.1 - 1000 x 1 11500 x 10 11000 x 10
55 x 0.05 55 x 0.05 550 x 0.5
MR55-5000 - 5000 x 5 400 x 0.5 - - 55000 x 50 550 x 0.5 - 5000 x 5
kgFm kgFm Nm
All sensors include a Plug & Test® connector for interfacing directly with an M7I, M5I, or M3I indicator. NIST-traceable certificate of
calibration with data is also included.
* Accuracy refers to the sensor only. Total accuracy includes the indicator’s accuracy (±0.1% or ±0.2%).
Ex: the total accuracy of the MR50-50 sensor with M5I indicator equals ±0.35% + ±0.1% = ±0.45% FS.
** Add suffix “-1” for shortened cable, for use on ESM303(H), ESM750, and ESM1500 test stands.
Ex: MR01-1000-1. Test stand mouning hardware is included.
22
Plug & Test Indicators and Sensors
Series F Force Sensors
Series FS05
Tension and compression force sensors
Series FS05 force sensors measure tension and compression forces. They
mount directly to the crosshead of models F105, F305, F505, and F505H test
frames, for a clean, integrated look.
Compatible with Models F105, F305, F505, and F505H. Adapter part no. AC1083
is required for Models F755, F755S, F1505, and F1505S.
Series FS06
Tension and compression force sensors
Series FS06 force sensors measure tension and compression forces. Designed
to accommodate bulkier grips and fixtures, they are compatible with Series F
test frame models up to 500 lbF / 2.2 kN.
With Plug & Test® technology, all configuration and calibration data is saved
within the sensor, allowing it to be calibrated on the test frame or off-site with a
Mark-10 indicator (optional adapter AC1083 required).
Series R07
Tension and compression force sensors
Series MR07 force sensors measure tension and compression forces, and are
designed for Series F test frames. With Plug & Test® technology, all configuration
and calibration data is saved within the sensor, allowing it to be calibrated on
the test frame or off-site with a Mark-10 indicator (optional adapter: AC1083
required).
Compatible with Models F755, F755S, F1505, and F1505S. Cannot be used with
Models F105, F305, F505, and F505H.
www.mark-10.com 23
Plug & Test Indicators and Sensors
Model PTA / PTAF
Connect common strain gage-based load cells, force sensors,
and torque sensors to Models M7I, M5I and M3I indicators with
this user-configurable adapter and software.
Sensor capacity and resolutions may be programmed via an
included software utility, which includes a library of common
force capacities from 0.12 to 750,000 lbF (0.5 N to 4,000 kN),
and torque capacities from 10 ozFin to 40,000 lbFft (7 Ncm to
57,000 Nm).
An identification number may be programmed, which
is displayed upon indicator power-up or the indicator’s
Information screen. Through Plug & Test® technology, all
configuration and calibration information is saved within the
adapter. This flexibility allows for interchangeability between
multiple sensors with any Mark-10 indicator.
Features:
C
ompatible with strain gage-based load cells,
force sensors, and torque sensors
Screw terminal block allows for easy connection of
sensor wires
S
oftware configuration utility is included, for easy
programming of sensor capacity, resolution,
and identification number
Program the adapter via USB or RS-232
through the indicator PTA
Mounting holes for bench mounting
Model No. Description
PTA Plug and Test® adapter
Adapter, customer-supplied sensor to Models F105 / F305 / F505 / F505H
PTAF
test frames
Sensor Requirements:
Type: Full bridge
Resistance: 300 - 1,000 ohms
Sensitivity: 1-3 mV/V
PTAF
24
Plug & Test Indicators and Sensors
Ordering Information - Series F Force Sensors
Accracy *
Overload
Capacity x Resolution
(±% FS)
Safe
Model No.
lbF ozF gF kgF N kN mN
FS05-012 0.12 x 0.00005 2 x 0.001 50 x 0.02 - 0.5 x 0.0002 - 500 x 0.2
FS05-025 0.25 x 0.0001 4 x 0.002 100 x 0.05 - 1 x 0.0005 - 1000 x 0.5
FS05-05 0.5 x 0.0002 8 x 0.005 250 x 0.1 - 2.5 x 0.001 - 2500 x 1
FS05-2 2 x 0.001 32 x 0.02 1000 x 0.5 1 x 0.0005 10 x 0.005 - -
FS05-5 5 x 0.002 80 x 0.05 2500 x 1 2.5 x 0.001 25 x 0.01 - -
FS05-10 10 x 0.005 160 x 0.1 5000 x 2 5 x 0.002 50 x 0.02 - -
0.1% 150%
FS05
FS05-20 20 x 0.01 320 x 0.2 10000 x 5 10 x 0.005 100 x 0.05 - -
FS05-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - -
FS05-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - -
FS05-200 200 x 0.1 3200 x 2 - 100 x 0.05 1000 x 0.5 1 x 0.0005 -
FS05-300 300 x 0.1 4800 x 2 - 150 x 0.05 1500 x 0.5 1.5 x 0.0005 -
FS05-500 500 x 0.2 8000 x 5 - 250 x 0.1 2500 x 1 2.5 x 0.001 -
FS06-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - -
FS06-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - -
FS06-200 200 x 0.1 3200 x 2 - 100 x 0.05 1000 x 0.5 1 x 0.0005 - 0.15% 150%
FS06
FS06-300 300 x 0.2 4800 x 5 - 150 x 0.1 1500 x 1 1.5 x 0.001 -
FS06-500 500 x 0.2 8000 x 5 - 250 x 0.1 2500 x 1 2.5 x 0.001 -
MR07-50 50 x 0.02 800 x 0.5 25000 x 10 25 x 0.01 250 x 0.1 - -
MR07-100 100 x 0.05 1600 x 1 50000 x 20 50 x 0.02 500 x 0.2 - -
MR07-200 200 x 0.1 3200 x 2 - 100 x 0.05 1000 x 0.5 1 x 0.0005 -
MR07-300 300 x 0.2 4800 x 5 - 150 x 0.1 1500 x 1 1.5 x 0.001 -
R07
0.15% 150%
MR07-500 500 x 0.2 8000 x 5 - 250 x 0.1 2500 x 1 2.5 x 0.001 -
MR07-750 750 x 0.5 12000 x 10 - 375 x 0.2 3750 x 2 3.75 x 0.002 -
MR07-1000 1000 x 0.5 16000 x 10 - 500 x 0.2 5000 x 2 5 x 0.002 -
MR07-1500 1500 x 1 24000 x 20 - 750 x 0.5 7500 x 5 7.5 x 0.005 -
All sensors include a NIST-traceable certificate of calibration with data.
www.mark-10.com 25
Wire Crimp Pull Testers
www.mark-10.com/wire-pull-testers
Model WT3-201
Manual, 200 lbF / 1,000 N
The WT3-201 is an integrated solution for manual wire
crimp pull testing requirements. An ergonomic lever
allows for easy application of force. Adjustable terminal
fixture contains multiple slots for diameters up to AWG 3
(0.25 in [6.3 mm]). USB output, data memory, and peak
force capture are provided.
S Adjustable wire terminal fixture accommodates S Unique knurled cam design effectively se- S Ergonomic lever easily
wire diameter sizes up to 0.25 in (6.3 mm). cures and pulls the loose end of the sample. applies force and re-
leases the sample.
Features Ordering Information
Peak force capture Model No. Description
USB, RS-232, Mitutoyo, and analog outputs WT3-201 Wire terminal tester, 110V
Data memory WT3-201E Wire terminal tester, 220V EUR
1,000-point data memory with statistics (min, max, WT3-201U Wire terminal tester, 220V UK
mean, standard deviation), and outputs. WT3-201A Wire terminal tester, 220V AUS
WT3001 Carrying case
Password protection
WT3002 Ring terminal fixture
Passwords may be set for calibration and for
WT3003 Machinable blank terminal fixture
individual keys, designed to protect the tester against
unauthorized changes. AC1049 Calibration kit
Automatic output
Automatic output / data storage / zeroing upon
sample break helps automate testing processes
26
Wire Crimp Pull Testers
Model WT3-201M
Motorized, 200 lbF / 1,000 N
The WT3-201M is an integrated motorized solution for
destructive and non-destructive wire crimp pull testing
requirements, such as pulling to a load and load holding.
Adjustable terminal fixture contains multiple slots for
diameters up to AWG 3 (0.25 in [6.3 mm]). USB output,
data memory with time stamp, and peak force capture
are provided, along with the ability to save up to 500 test
profiles.
S The tester automatically starts when the sample S As the test begins, serrated cams S Save and recall multiple profiles, for
is loaded, and returns to home when the sample engage the sample. A pinch guard quick and accurate switchover to
breaks. Adjustable terminal fixture accommo- (red tab shown above) automati- different test methods.
dates wire diameters up to 0.25 in (6.3 mm). cally rotates into position, for added
safety.
Features Ordering Information
Measures real-time and peak force values Model No. Description
Selectable test speed, w/high speed approach Hardware
and reverse WT3-201M Motorized wire crimp pull tester, 110V
Auto-start upon sample insertion WT3-201ME Motorized wire crimp pull tester, 220V EUR
Auto-reverse at sample break or load WT3-201MU Motorized wire crimp pull tester, 220V UK
USB, RS-232, Mitutoyo, and analog outputs WT3-201MA Motorized wire crimp pull tester, 220V AUS
2,000-point data memory with statistics, output, WT3002 Ring terminal fixture
and date and time stamp WT3003 Machinable blank terminal fixture
Save and recall up to 500 test profiles WT3004 Carrying case
AC1049 Calibration kit
Pull to a specified load or maintain load for a
specified period of time, as per UL 486A/B Optional Functions
WF010 Profiles
WF011 Pull to load limit
WF012 Load holding
WF013 Date and time stamp
Complete options package
WFCOMP
(includes all Controller Options)
www.mark-10.com 27
Ergonomics Gauges & Kits
www.mark-10.com/ergonomics
Test push/pull muscle strength and functional task requirements
These force gauge kits are ideal for strength assessment, ergonomic studies, and workplace design. Available in
capacities of 100 lbF (500 N), 200 lbF (1,000 N), and 500 lbF (2,500 N).
Series EK3 basic kits offer everyday functionality and include a selection of commonly used attachments.
Series E offers increased force gauge performance, with unique Click-Lock® accessory mounting technology. Se-
lect pre-configured kits, or pick and choose a gauge and accessories suited to your unique applications.
Series EKM5 myometer kits are designed for muscle strength assessments, and include a Series 5 force gauge,
strap and hook. A myometer accessory is also available for Series E.
Comparison Chart
Series 3 Series E
(included w/Series EK3 kits) (included w/Series EKE kits)*
Accuracy ±0.3% ±0.2%
Sampling rate 2,000 Hz 7,000 Hz
Units of measurement lbF, kgF, N lbF, ozF, kgF, N, kN
USB data output
Averaging mode
On-board data memory & statistics
Continuous data capture Series 3 Series EK3 kit
Accessory mounting Traditional mounting threads Click-Lock® Technology
Password protection
Available accessories:
Single handle grip
Double handle grip
Padded attachment, curved
Padded attachment, flat
Padded attachment, square
Padded attachment, circular Series E Series EKE kit
Hook Clevis grip Snap hook
Chain / hook assembly * Refer to the Series E data sheet for information about which
accessories are included with each kit level.
Pistol grip
MESUR® Lite software included
28
Ergonomics Gauges & Kits
Click-Lock® Technology - Series E
Attachments click and lock into place via innovative Click-Lock® technology, a rugged
anti-rotation locking mechanism. The attachments may be clicked into 90° or 180°
orientations. No fastening is required, as with conventional force gauges, reducing the
risk of damage to the instrument.
Available Accessories - Series E
3 4
5
6 8 9
1
2
7
10
11
12
1 E1010 pistol grip 7 E1008 single handle grip Ordering Information - Kits
2 E1002 padded attachment, 8 E1007 chain / hook
square Model No. Description
assembly
EK3-100 Basic ergonomics testing kit, 100 lbF / 500 N
3 E1003 padded attachment, 9 E1013 myometer
rectangular accessory EK3-200 Basic ergonomics testing kit, 200 lbF / 1,000 N
EK3-500 Basic ergonomics testing kit, 500 lbF / 2,500 N
4 E1004 padded attachment, 10 E1012 looped cable
curved EKE-100-1 Advanced ergonomics kit, 100 lbF / 500 N
11 Series E force gauge
5 E1005 padded attachment, EKE-200-1 Advanced ergonomics kit, 200 lbF / 1,000 N
12 E1006 hook
circular EKE-500-1 Advanced ergonomics kit, 500 lbF / 2,500 N
6 E1009 double handle grip EKE-100-2 Professional ergonomics kit, 100 lbF / 500 N
EKE-200-2 Professional ergonomics kit, 200 lbF / 1,000 N
EKE-500-2 Professional ergonomics kit, 500 lbF / 2,500 N
EKM5-200 Myometer, complete kit w/M5-200 force gauge
All models include 110V AC adapters. Add suffix ‘E’ for euro plug
(220V), ‘U’ for UK plug (220V), or ‘A’ for Australian plug (220V).
Example: EK3-100E, EKE-200-1U, EKM5-200A
www.mark-10.com 29
Manual Test Stands
www.mark-10.com/manual-test-stands
Model ES05
Force, Manual, 30 lbF / 150 N
The ES05 test stand is an economical and compact
compression-only test stand for various testing
applications. A spring-loaded lever allows for repeatable
testing with up to 1.5” (38 mm) displacement, and the
lever mechanism can be repositioned along the length
of the column.
Features
Spring loaded lever mechanism
Convenient for repetitive testing.
Repositionable lever mechanism
Adds flexibility in test setups.
Compact size
Portable, small footprint.
Models ES10 and ES20
Force, Manual, 100 lbF / 500 N
The ES10 and ES20 test stands are economical
and compact push/pull solutions for many testing
applications. Available in lever (ES10) or hand wheel
(ES20) operation.
Features
Choice of lever (ES10) or hand wheel (ES20)
operation
ever action provides for quick testing at high
L
speeds, while hand wheel action allows for fine
positioning and better motion control.
O
ptional 1” dial or digital indicator
(ES001, ES002)
For spring testing, rubber and polymer testing,
ES20
and more. Digital model displays in and mm. Also
ES10 available as brackets only (no indicator).
Compact size
Portable, small footprint.
ES001 ES002
30
Manual Test Stands
Model ES30
Force, Manual, 200 lbF / 1,000 N
The ES30 accommodates a wide range of sample shapes and sizes due to
generous travel distance, daylight, and throat distance. Convenient side-
mounted hand wheel operation makes testing easier.
Features
Side mounted hand wheel
Convenient loading method, offers more control over test speed.
Removable base
The entire base may be removed for alternative mounting.
Optional digital travel displays (ESM001, ESM004)
Useful in spring testing, rubber and polymer testing, and other
applications. Select from 6" [152 mm] and 12" [305 mm] lengths.
Optional column extensions
For testing long samples. Available in lengths of 6" [152 mm] (ESM003-1),
12" [305 mm] (ESM003-2), and 24" [610 mm] (ESM003-3). Custom lengths
also available.
Model TSA750 / TSA750H
Force, Manual, 750 lbF / 3,750 N
The TSA750 is a rugged stand for heavy duty testing applications requiring
quick action. Lever operation allows the operator to produce 750 lbF with
relatively little effort. Modular design allows for the force gauge bracket and
lever mechanism to be repositioned along the column. Available in vertical and
horizontal configurations.
Features
Rack and pinion mechanism with lever operation
Allows for quick testing. The lever can be repositioned in 30° increments.
Adjustable travel stops
For limiting travel distance. Useful in repetitive testing.
Optional 6" [512 mm] digital travel display (TSA001) TSA750
Useful in spring testing, rubber and polymer testing, and other
applications.
TSA750H
www.mark-10.com 31
Manual Test Stands
Model TSB100
Force, Manual, 100 lbF / 500 N
The TSB100 is a lever-operated test stand for many applications requiring
quick action. Lightweight and compact design makes this stand portable
for field testing. Modular design allows for the force gauge bracket and lever
mechanism to be repositioned along the column. Removable base allows for a
range of custom mounting configurations. Adjustable travel stops are available.
Features:
Rack and pinion mechanism with lever operation
Allows for quick testing. The lever can be repositioned in 30° increments.
Removable base with loading table
A steel loading table with threaded holes is provided for grip or fixture
mounting. The entire base may be removed for alternative mounting.
Optional 6" [152 mm] digital travel display (TSB001)
Useful in spring testing, rubber and polymer testing, and more.
Model TSC1000 / TSC1000H
Force, Manual, 1,000 lbF / 5,000 N
The TSC1000 is a rugged stand for heavy duty testing requirements requiring
fine position control without back driving. Hand wheel operation allows the
operator to produce gradual and repeatable force during testing. Modular
design allows for the gauge mounting plate and housing to be moved along
the length of the column. Removable base (TSC1000) or mounting legs
(TSC1000H) allow for a range of custom mounting configurations.
Features:
Inline hand wheel operation
Precision Acme screw and nut provide smooth operation over the entire
1,000 lbF range. Inline force minimizes column bending during testing.
Modular design
djustable components accommodate a wide range of testing
A
configurations.
Optional 6" [152 mm] digital travel display (TSC001)
TSC1000 Useful in spring testing, rubber and polymer testing, and more.
TSC1000H
32
Manual Test Stands
Model TSF / TSFH
Force, Manual, 1,000 lbF / 5,000 N
The TSF is a rugged stand with a rigid column, making it perfect for spring
testing, high force tensile testing, and other applications. Precision side-
mounted hand wheel operation is virtually effortless over the entire 1,000 lbF
range, without back driving. Modular design allows for the gauge mounting
plate and housing to be moved along the length of the column. Removable
base (TSF) or mounting legs (TSFH) allow for a range of custom mounting
configurations.
Features:
Side-mounted hand wheel operation
Ergonomic loading method reduces operator fatigue.
Exceptionally strong column
Rugged 3” x 3” column is durable and stiff, ideal for spring testing. Force is
produced in line with the screw actuator, minimizing column deflection.
Optional 6" [152 mm] digital travel display (TSF001)
Useful in spring testing, rubber and polymer testing, and other TSF
applications.
TSFH
Specifications - Manual Force Test Stands
Capacity Maximum travel 1 Travel rate Daylight 2
Model No. Loading method
lbF [N] in [mm] in [mm] in [mm]
ES05 30 [150] 1.5 [38] Spring-loaded lever - 8 [203]
ES10 Lever 1.050 [26.7] / lever rev.
100 [500] 9 [229] 9 [229]
ES20 Top-mounted hand wheel 0.083 [2.1] / wheel rev.
ES30 200 [1,000] 13 [330] Side-mounted hand wheel 0.050 [1.3] / wheel rev. 14 [356]3
TSA750 with travel stops: 10.5 [267]3
750 [3,750] Rack & pinion,
2.75 [70] 3.00 [76.2] /
TSA750H lever can be positioned in 14.5 [368]3
without travel stops: lever rev.
30° increments
TSB100 100 [500] 6 [152] 21 [533]3
TSC1000 0.10 [2.5] / 10 [254]3
3.5 [89] Inline hand wheel
TSC1000H wheel rev. 13 [330]3
1,000 [5,000]
TSF 14 [356]3
4 [102] Side-mounted hand wheel 0.013 [0.34] / wheel rev.
TSFH 16.5 [419]3
1. Maximum travel depends on the grips or fixtures used during testing. The dimensions indicate distances without the use of grips or fixtures.
2. The clearance between the bottom of a mounted force gauge or sensor and the loading surface of the stand. Daylight will be reduced through
the use of grips or fixtures. If the test sample size is close to the daylight specification above (or daylight less grip(s) or fixture(s)), a column
extension may be necessary.
3. Column extensions are available.
www.mark-10.com 33
Series F Force Testers
Series F Tension / Compression Test Frames are
engineered for force testing applications up to 1,500
lbF (6.7 kN). Select from a broad range of force sensor
capacities and an expansive array of grips and fixtures.
Series F is offered with two controller options.
EasyMESUR® testers are basic and configurable
for everyday testing needs. IntelliMESUR® systems
address more complex, multi-step applications
demanding more customization, greater selection of
results, and advanced analytical tools.
www.mark-10.com/seriesf
34
Motorized Force Testers
Meet the frames
There’s a Series F test frame for every need and budget. Select from a wide range of force capacities, heights, and form factors.
F105 / F305 / F505 F755 / F1505 F755S / F1505S F505H
F105 F305 F505 F505H F755 F755S F1505 F1505S
100 lbF 300 lbF 500 lbF 500 lbF 750 lbF 750 lbF 1,500 lbF 1,500 lbF
Force capacity:
[0.5 kN] [1.3 kN] [2.2 kN] [2.2 kN] [3.4 kN] [3.4 kN] [6.7 kN] [6.7 kN]
18.0 in 18.0 in 18.0 in 18.0 in 32.0 in 14.2 in 32.0 in 14.2 in
Travel distance:
[457 mm] [457 mm] [457 mm] [457 mm] [813 mm] [360 mm] [813 mm] [360 mm]
www.mark-10.com 35
Motorized Force Testers
Engineered for performance
Rigid and precise mechanical design Seamless force sensor interface
Exceptionally rigid extrusion-based frames are engineered Ideal for most applications, Series FS05 smart force
for stiffness. Factory compensation of test frames and sensors mount directly to the crosshead of models F105,
force sensors ensure position accuracy of up to ±0.002 F305, F505, and F505H, without any connecting cables.
in / 0.05 mm under any load, at any position. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN].
Stepper motors and controllers drive a ballscrew and Accurate to ±0.1% of full scale.
linear guideway for smooth, quiet operation, with virtually
no speed variation under load.
Modular design Limit switches
Frame bases can be removed to accommodate column Solid-state upper and lower limit switches may be used
extensions and alternative mounting configurations. Most as test limits or as test exceptions. Dual-graduated rulers
electronics are housed in a self-contained enclosure, aid in switch placement.
easily accessed and replaced if needed.
36
Motorized Force Testers EasyMESUR®
www.mark-10.com/easymesur
The EasyMESUR® integrated control panel centralizes test setup, test frame control, and data collection into one
convenient place. Use the 7” [177 mm] touchscreen to create and run a wide range of tests, including:
Test to a load
Test to a sample break
Test to a distance
Load holding
Cycle testing
Average load testing
Coefficient of friction testing
Spring rate measurement
View data in graphical format or results tables. Save or
export data as needed, or generate a report.
www.mark-10.com 37
Motorized Force Testers EasyMESUR®
Key features
What’s your point of view?
Run a test from any of the following views:
Standard view Graph view Results view
View load and distance values with View a graph of load vs. distance or View results for each run, with
clear, simple controls. time, with pass/fail status. corresponding statistics for the results.
Secure user access Easy test access
Control user access to sensitive areas, such as test editing Open and edit tests saved within the control panel or
and calibration, via password. external USB drive.
38
Motorized Force Testers EasyMESUR®
Control panel features
Rugged aluminum housing
7” touch display
USB-C port for connection to a PC
Import and export results, reports, and test files to a PC.
USB-C port for an external flash drive
Import and export results, reports, and test files
to a USB flash drive.
Intelligent manual control
Manually control the test frame to obtain quick load and distance results,
or position the crosshead prior to a test. Select from several actuation
methods, including momentary (button-hold), maintained (button release)
motion, jog mode with three incremental distance presets.
With Mark-10’s innovative FollowMe®
function, push and pull on the force sensor
to move the crosshead. Apply greater force
to achieve faster motion. FollowMe® is
responsive enough for quick positioning as
well as fine adjustments.
FollowMe® Manual Control view
www.mark-10.com 39
Motorized Force Testers EasyMESUR®
Test setup is easy as 1-2-3
Select a test type, and EasyMESUR® will guide you through the setup.
Load Limit Distance Limit Break Limit Load Hold Cycle Averaging
1. Basic Test Settings 2. Results Settings 3. Graph Settings
Test direction Select results Single-point or continuous
Speed Configure pass/fail limits graphing
Test-specific parameters Set data collection rate Select load vs. time or vs.
distance
Data storage preferences Set auto-return to home
Graphing start threshold
40
Motorized Force Testers EasyMESUR®
Robust data acquisition
and management
Blazingly fast
Force sensor sampling rate of 5,000 Hz yields accurate
peak measurements even in quick-duration events.
EasyMESUR® collects load and travel data at up to 100
Hz, and saves up to 100,000 data points per run.
Customizable reporting
Create a PDF report, including results, statistics, graph,
system and user information, and comments. Create
report templates to save with future reports.
Save, export, and recall data
Save individual run data or results files to a USB drive or
internal storage accessible from a PC.
Data and results may also be exported as .csv files.
Third-Party communication
Connects the EasyMESUR® control panel to a PC for
data collection by a third-party application such as SPC
software. Data can be transmitted from the control panel
via the Data button or requested from the application via
serial commands. Optional UXU100 USB communication
adapter required.
PDF report
Results .csv output
www.mark-10.com 41
Motorized Force Testers EasyMESUR®
Tailored to your needs and budget
From basic tests to more advanced needs, EasyMESUR®’s
unique optional function platform allows you to select the
functions that best suit your requirements.
Any functions not purchased at time of order can be
easily enabled in the field via activation codes.
EasyMESUR® systems are shipped in Evaluation Mode, in
which all functions are enabled for 160 hours of operation.
Optional Functions
Function Description Co-requirements
Distance Measurement Measure distance, with the ability to zero the reading. -
Distance Limits Stop at user-defined upper and lower distance limits. - Distance Measurement
Preload Zero the travel position automatically at a user-defined preload value. - Distance Measurement
High Speed Extension Extend the high end of the speed range, dependent upon test frame model. -
Low Speed Extension Extend the low end of the speed range, dependent upon test frame model. -
- If cycling to distance limits,
add Distance Measurement
Set up to 100,000 cycles, with user-defined upper and lower dwell times. Cycle and Distance Limits
Cycling
between any combination of limit switches, travel limits, breaks, and load limits.
- If cycling to a break point, add
Break Detection
Break Detection Stop when a user-defined drop in load occurs. -
Stop at, and maintain, a user-defined load for a specified period of time. For
Load Holding best performance, use a force sensor with a capacity as close as possible to the -
target load.
Push and pull on the sensor’s loading shaft to jog the crosshead up and down,
FollowMe® -
ideal for manual positioning prior to a test. Speed increases with applied force.
Graph load vs. time or distance, view statistics, and generate a report, including - If graphing load vs. distance,
Graphing & Reporting
graph, results, run data, and other information. add Distance Measurement
Control the test frame with your own application using a supplied library of mo-
PC Control tion control and data collection serial commands. While PC control is active, the - AC1107 cable, test frame to PC
control panel becomes a pendant, limited to basic, manual controls.
Coefficient of Friction - G1086 coefficient of friction
Measure static & dynamic coefficients of friction, with user-defined sled weight.
Measurement fixture (suggested)
- Distance Measurement
- Suggested functions:
Spring Rate Measurement Measure spring rate, with user-defined start and stop data collection triggers.
Distance Limits
Preload
Optional Function Packages Package Included Functions
Related functions are combined Distance Measurement Package • Distance Measurement • Distance Limits • Preload
into available packages. A complete
options package is also offered. Speed Extension Package • High Speed Extension • Low Speed Extension
Advanced Functionality Package • Cycling • Break Detection • Load Holding • FollowMe®
Complete Options Package • All functions
42
Motorized Force Testers EasyMESUR®
Uniquely serviceable
Calibrate force sensors on the test frame
or off-site
Calibrate force sensors in one of two ways:
Test frame
EasyMESUR® provides an integrated utility, with an
intuitive step-by-step wizard. Manual controls allow
the technician to use the test frame to apply tension
and compression forces.
Off-site
Conveniently remove the force sensors for off-site
calibration with a Mark-10 Model M7I or M5I indicator.
FS05 force sensor
connected to an M5I
indicator via AC1083
adapter for off-site
calibration
Field-upgradeable
Update the test frame’s firmware and EasyMESUR®
software in the field via a simple user interface. No
need to schedule a service call or to ship hardware to
the factory.
Easy-to-service electronics
Most electronics are housed in an integrated module,
easily replaced without special tools or processes.
Removing the
electronics module
www.mark-10.com 43
Motorized Force Testers EasyMESUR®
In The Box
F105 / F305 / F505 / F505H F755 / F755S / F1505 / F1505S
Control panel with mounting hardware Control panel with mounting hardware
#10-32M medium hook Eye end kit for base
5/16-18M large hook Lock ring for eye end (2)
#10-32F 2” diameter compression plate Spanner wrench (2)
#10-32 F/F coupler Power cord
Adapter, 5/16-18M to #10-32F Allen wrench set
Set screw, #10-32 x 3/4”
Hex nut, #10-32 (2)
Power cord
Allen wrench set
44
Motorized Force Testers EasyMESUR®
Specifications
F105-EM F305-EM F505-EM F505H-EM F755-EM F755S-EM F1505-EM F1505S-EM
100 lbF 300 lbF 500 lbF 750 lbF 1,500 lbF
Load capacity*:
[0.5 kN] [1.3 kN] [2.2 kN] [3.4 kN] [6.7 kN]
18.0 in 32.0 in 14.2 in 32.0 in 14.2 in
Maximum travel:
[457 mm] [813 mm] [360 mm] [813 mm] [360 mm]
Standard 0.5 - 13 in/min 0.5 - 24 in/min
speed range: [13 - 330 mm/min] [10 - 600 mm/min]
Optional 0.02 - 45 in/min 0.001 - 60 in/min 0.001 - 70 in/min
speed range: [0.5 - 1,100 mm/min] [0.02 - 1,525 mm/min] [0.02 - 1,800 mm/min]
Load accuracy Test frame: ±0.1%
(% of full scale): Force sensor: Series FS05: ±0.1% | Series FS06: ±0.15% | Series R07: ±0.15%
Peak sampling rate: 5,000 Hz
Data acquisition rate: 100 Hz
Speed accuracy: ±0.2% of setting, virtually no variation with load
Position accuracy: ±0.006 in [0.15 mm], at any load or position, factory-compensated
Distance resolution: 0.001 in [0.02 mm]
Limit switch
±0.001 in [0.03 mm]
repeatability:
Universal input 100-240 VAC, Universal input 100-240 VAC,
Power: Universal input 100-240 VAC, 50/60 Hz, 120W
50/60 Hz, 300W 50/60 Hz, 450W
Fuse type: 2.5 A, 250V, 3AG, SLO BLO 4A, 3AG, SLO BLO
60 lb 70 lb 184 lb 149 lb 197 lb 157 lb
Weight:
[27 kg] [32 kg] [83 kg] [68 kg] [89 kg] [71 kg]
75 lb 85 lb 235 lb 195 lb 247 lb 205 lb
Shipping weight:
[34 kg] [39 kg] [107 kg] [88 kg] [112 kg] [93 kg]
Indoor use only, up to 6,500 ft [2,000 m] above sea level
Environmental conditions: 40 - 95°F [5 - 35°C], to 80% relative humidity at 31°C, decreasing linearly to 50% relative humid-
Environmental ity at 40°C, non condensing
conditions: Mains supply voltage fluctuations up to ±10 % of the nominal voltage
Transient overvoltages up to the levels of Overvoltage Category II
Use in environments up to Pollution Degree 2
Conformance: CE, UKCA
Warranty: 3 years [see individual statement for further details]
* Load capacity is reduced at higher speeds, as follows:
- F305-EM: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
- F505-EM / F505H-EM: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min
- F755-EM / F755S-EM: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505-EM / F1505S-EM: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
www.mark-10.com 45
Motorized Force Testers EasyMESUR®
Ordering Information
Model No.1 Description
F105-EM Test frame with EasyMESUR® control panel, vertical, 100 lbF / 0.5 kN
F305-EM Test frame with EasyMESUR® control panel, vertical, 300 lbF / 1.3 kN
F505-EM Test frame with EasyMESUR® control panel, vertical, 500 lbF / 2.2 kN
F505H-EM Test frame with EasyMESUR® control panel, horizontal, 500 lbF / 2.2 kN
F755-EM Test frame with EasyMESUR® control panel, vertical, 750 lbF / 3.4 kN
F755S-EM Test frame with EasyMESUR® control panel, vertical, short, 750 lbF / 3.4 kN
F1505-EM Test frame with EasyMESUR® control panel, vertical, 1,500 lbF / 6.7 kN
F1505S-EM Test frame with EasyMESUR® control panel, vertical, short, 1,500 lbF / 6.7 kN
Optional Functions2
EMF001-1 / EMF001-2 Distance Measurement
EMF002-1 / EMF002-2 Distance Limits
EMF003-1 / EMF003-2 Preload
EMF004-1 / EMF004-2 High Speed Extension
EMF005-1 / EMF005-2 Low Speed Extension
EMF006-1 / EMF006-2 Cycling
EMF007-1 / EMF007-2 Break Detection
EMF008-1 / EMF008-2 Load Holding
EMF009-1 / EMF009-2 FollowMe®
EMF010-1 / EMF010-2 Graphing & Reporting
EMF011-1 / EMF011-2 PC Control
EMF012-1/ EMF012-2 Coefficient of Friction (COF) Measurement
EMF013-1/ EMF013-2 Spring Rate Measurement
Optional Function Packages2
EMP001-1 / EMP001-2 Distance Measurement Package
EMP002-1 / EMP002-2 Speed Extension Package
EMP003-1 / EMP003-2 Advanced Functionality Package
EMP-COMP-1 / EMP-COMP-2 Complete Options Package
1. All test frame models contain a universal power supply (80 - 240V) and power cord with 110V US prong style. Add suffix ‘E’
for 220V European prong, ‘U’ for 220V UK prong, or ‘A’ for 220V Australian prong. Ex: F505-EME.
2. Use suffix -1 for models F105/F305/F505/F505H -EM, and -2 for models F755/F755S/F1505/F1505S -EM
46
Motorized Force Testers EasyMESUR®
Model No. Description
Optional Equipment
CERT-DS Certificate of calibration, distance and speed
AC1116 USB cable, control panel to PC
AC1107 USB cable, test frame to PC
AC1094-1 Single column extension, 6 in / 150 mm, F105 / F305 / F505
AC1094-2 Single column extension, 12 in / 300 mm, F105 / F305 / F505
AC1094-3 Single column extension, 24 in / 600 mm, F105 / F305 / F505
AC1094-4 Single column extension, 6 in / 150 mm, F505H
AC1094-5 Single column extension, 12 in / 300 mm, F505H
AC1094-6 Single column extension, 24 in / 600 mm, F505H
AC1095-1 Double column extension, 6 in / 150 mm, F105 / F305 / F505
AC1095-2 Double column extension, 12 in / 300 mm, F105 / F305 / F505
AC1095-3 Double column extension, 24 in / 600 mm, F105 / F305 / F505
AC1092-1 Shield, F755S / F1505S
AC1092-2 Shield, F755 / F1505
AC1083 Adapter, FS05 sensor / PTAF adapter, to Plug & Test® connector / F755, F755S, F1505, F1505S test frames, 10 in / 250 mm cable
AC1084 Extension cable, 24 in / 610 mm, Plug & Test®, male/female
PTAF Adapter, Plug & Test®, customer-supplied force sensor to Series F test frames
UXU100 USB communication adapter
DC6000-M IntellMESUR® upgrade, tablet control panel assembly & test frame mounting arm
15-1019 IntelliMESUR® software, customer installation on a Windows device, additional seat/USB dongle
www.mark-10.com 47
Motorized Force Testers IntelliMESUR®
www.mark-10.com/intellimesur
IntelliMESUR® is an advanced, integrated force measurement system. Select a pre-loaded 10.1” tablet with mounting
bracket or use your own Windows device. With IntelliMESUR®, you can create and run a wide range of basic and multi-
step tests, including:
Limit testing to a load, break, or distance
Height measurement
Load holding*
Cycle testing
Multi-step testing, utilizing any combination of
motion control and data collection functions
Coefficient of friction (COF) testing (optional)
Spring rate measurement
Perform individual runs or batches, and view data in
graphical format or results tables. Save or export data
as needed, or generate a report.
* For best performance with the load holding function, we recommend
using a force sensor with a capacity as close as possible to the
target load.
48
Motorized Force Testers IntelliMESUR®
Key Features
Ready. Set. Go.
Quickly access up to 10 favorite tests.
Associate an image with each favorite
for easy identification.
What’s your point of view?
Run a test from the Graph or Results
views, and switch views as needed.
Pass / Fail indicator easily identifies
problematic samples. Individual runs
may be invalidated if, for example, the
sample slips out of the grips, or the test
was interrupted.
X Graph view
The Graph view plots load vs. dis-
tance or force vs. time. Overlay up
to 10 runs for visual comparisons.
X Results view
The Results view displays user-se-
lected results for each run. Statistics
may be applied to selected results.
www.mark-10.com 49
Motorized Force Testers IntelliMESUR®
Multi-step tests
Building upon basic test wizards,
easily incorporate any combination
of steps, with the ability to loop a
sequence of steps. Select from:
Move to load
Move to distance
Move to break
Hold a load or position
Loop / cycle
Datum
Prompts
Save current load or position Insert and re-order steps as necessary
Zero load or position
Return to Home position
Operator prompting
Prompts can appear at the beginning
of each test, batch, or run.
Ask prompts ask the operator for
information which is saved in the
results table - for example, a lot
number. Type the response or use
a barcode scanner.
Tell prompts provide instructions Ask Prompt Tell Prompt
to the operator, and can include an
image.
Take your measurements to new heights
Use Height Mode to determine height at a specific load, commonly used in
spring testing. A datum may be set to define the reference point.
Deflection compensation
Series F test frames and force sensors are deflection-compensated at the
factory, resulting in system distance measurement accuracy of ±0.002 in /
0.05 mm at any load and at any position along the frame.
To further compensate grips and attachments, use IntelliMESUR®’s deflection
compensation utility. The deflection offset file can be associated with the test
setup file.
50
Motorized Force Testers IntelliMESUR®
Test Setup
Basic tests
Select a test type, and IntelliMESUR® will guide you through the setup.
Load Limit Distance Limit Break Limit Load Hold Cycle
1. Pre-Test Settings 2. Test Settings 3. Results & Statistics
Units of measurement Test objective Selection
Batch size Speed Final load
Display preferences Pass / fail limits Maximum load
Preload Exception limits Minimum load
Operator prompts Load at max. distance
Load at min. distance
Average load
Delta load
Maximum distance
Final distance
Minimum distance
Height
Distance at max. load
Distance at min. load
Distance at break
Delta distance
Area under the curve
Pre-Test Settings
Spring rate
Test Settings
Results & Statistics Selection
www.mark-10.com 51
Motorized Force Testers IntelliMESUR®
Robust data acquisition and management
Blazingly fast
Force sensor sampling rate of 20,000 Hz yields accurate
peak measurements even in quick-duration events.
IntelliMESUR® collects load and travel data at up to 1,000
Hz, and allows up to 1 million data points per run.
Customizable reporting
Print or create a PDF report, including results, statistics,
graph, system and user information, and comments.
Personalize the report with your company logo and an
additional image.
Create report templates to save with future reports.
Save or export data
Automatically or manually save individual runs and results
to a USB drive or file location of your choice. File names
are automatically generated with the test name and time
stamp, for quick searchability. Results sets and data from
individual runs may also be exported as .csv files.
Results .csv output PDF report
52
Motorized Force Testers IntelliMESUR®
Intelligent manual control
Manually control the test frame to obtain
quick force and distance results, or
manually position the crosshead prior
to a test. Select from several actuation
methods, including momentary (button-
hold), maintained (button release)
motion, jog mode with three distance
presets.
With Mark-10’s innovative FollowMe®
function, push and pull on the force
sensor to move the crosshead. Apply
greater force to achieve faster motion.
FollowMe® is responsive enough
for quick positioning as well as fine
adjustments.
FollowMe®
The Height / Length Offset utility in
Manual Control defines a reference
point to accommodate applications in
which grips cannot directly touch one
another.
www.mark-10.com 53
Motorized Force Testers IntelliMESUR®
Uniquely serviceable
Calibrate force sensors on the
test frame or off-site
Calibrate Series FS05, FS06 and R07
force sensors in one of two ways:
Test frame
IntelliMESUR® provides an integrated
utility, with an intuitive step-by-step
wizard. Manual controls allow the
technician to use the test frame to apply
tension and compression forces.
Off-site
Conveniently remove the force sensors
for off-site calibration with a Mark-10
Model M7I or M5I indicator.
Field-upgradeable
Test frame firmware and IntelliMESUR®
software can be updated in the field
via a simple user interface. No need
to schedule a service call or to ship
hardware to the factory.
FS05 force sensor connected to an M5I
indicator via AC1083 adapter for off-site
calibration
Easy-to-service electronics
Most electronics are housed in an
integrated module, easily replaced
without special tools or processes.
Removing the electronics module
54
Motorized Force Testers IntelliMESUR®
In The Box
F105 / F305 / F505 / F505H F755 / F755S / F1505 / F1505S
Control panel, mounting bracket, and hardware Control panel, mounting bracket, and hardware
(-IMT models only) (-IMT models only)
Mounting bracket, column end (F505H only) USB flash drive containing software installation
USB flash drive containing software installation files (-IM models only)
files (-IM models only) USB dongle (-IM models only)
USB dongle (-IM models only) USB cable
USB cable Eye end kit for base
#10-32M medium hook Lock ring for eye end (2)
5/16-18M large hook Spanner wrench (2)
#10-32F 2” diameter compression plate Power cord
#10-32 F/F coupler Allen wrench set
Adapter, 5/16-18M to #10-32F
Set screw, #10-32 x 3/4”
Hex nut, #10-32 (2)
Power cord
Allen wrench set
www.mark-10.com 55
Motorized Force Testers IntelliMESUR®
Specifications
F105 F305 F505 F505H F755 F755S F1505 F1505S
100 lbF 300 lbF 500 lbF 750 lbF 1,500 lbF
Load capacity*:
[0.5 kN] [1.3 kN] [2.2 kN] [3.4 kN] [6.7 kN]
18.0 in 32.0 in 14.2 in 32.0 in 14.2 in
Maximum travel:
[457 mm] [813 mm] [360 mm] [813 mm] [360 mm]
0.02 - 45 in/min 0.001 - 60 in/min 0.001 - 70 in/min
Speed range:
[0.5 - 1,100 mm/min] [0.02 - 1,525 mm/min] [0.02 - 1,800 mm/min]
Load accuracy Test frame: ±0.1%
(% of full scale): Force sensor: Series FS05: ±0.1% | Series R06: ±0.15% | Series R07: ±0.15%
Peak sampling rate: 20,000 Hz
Data acquisition rate: 1,000 Hz
Speed accuracy: ±0.2% of setting, virtually no variation with load
Distance accuracy: ±0.002 in [0.05 mm], at any load or position, factory-compensated
Distance resolution: 0.0005 in / 0.01 mm
Limit switch
±0.001 in / 0.03 mm
repeatability:
Universal input 100-240 VAC, Universal input 100-240 VAC,
Power: Universal input 100-240 VAC, 50/60 Hz, 120W
50/60 Hz, 300W 50/60 Hz, 450W
Fuse type: 2.5A, 250V, 3AG, SLO BLO 4A, 3AG, SLO BLO
60 lb 70 lb 184 lb 149 lb 197 lb 157 lb
Weight:
[27 kg] [32 kg] [83 kg] [68 kg] [89 kg] [71 kg]
75 lb 85 lb 235 lb 195 lb 247 lb 205 lb
Shipping weight:
[34 kg] [39 kg] [107 kg] [88 kg] [112 kg] [93 kg]
Indoor use only
Up to 6,500 ft [2,000 m] above sea level
Temperature range: 40 - 95°F [5 - 35°C]
Environmental
Humidity range: up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non condensing
conditions:
Mains supply voltage fluctuations up to ±10 % of the nominal voltage
Transient overvoltages up to the levels of Overvoltage Category II
Use in environments up to Pollution Degree 2
Conformance: CE, UKCA
Warranty: 3 years [see individual statement for further details]
* Load capacity is reduced at higher speeds in the following models:
- F305: limited to 200 lbF [1 kN] above 24 in [610 mm]/min
- F505 / F505H: limited to 300 lbF [1.3 kN] above 24 in [610 mm]/min
- F755 / F755S: limited to 500 lbF [2.3 kN] above 35 in [900 mm]/min
- F1505 / F1505S: limited to 1,000 lbF [4.5 kN] above 60 in [1,525 mm]/min
56
Motorized Force Testers IntelliMESUR®
Ordering Information
Model No. Description
Test Frame + Pre-Configured Tablet Control Panel
F105-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 100 lbF / 0.5 kN, 110V*
F305-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 300 lbF / 1.3 kN, 110V*
F505-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 500 lbF / 2.2 kN, 110V*
F505H-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, horizontal, 500 lbF / 2.2 kN, 110V*
F755-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 750 lbF / 3.4 kN, 110V*
F755S-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 750 lbF / 3.4 kN, 110V*
F1505-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 1,500 lbF / 6.7 kN, 110V*
F1505S-IMT Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, short, 1,500 lbF / 6.7 kN, 110V*
Test Frame + Standalone Software (for customer installation on a Windows device)
F105-IM Test frame with IntelliMESUR® software, single license, vertical, 100 lbF / 0.5 kN, 110V*
F305-IM Test frame with IntelliMESUR® software, single license, vertical, 300 lbF / 1.3 kN, 110V*
F505-IM Test frame with IntelliMESUR® software, single license, vertical, 500 lbF / 2.2 kN, 110V*
F505H-IM Test frame with IntelliMESUR® software, single license, horizontal, 500 lbF / 2.2 kN, 110V*
F755-IM Test frame with IntelliMESUR® software, single license, vertical, 750 lbF / 3.4 kN, 110V*
F755S-IM Test frame with IntelliMESUR® software, single license, vertical, short, 750 lbF / 3.4 kN, 110V*
F1505-IM Test frame with IntelliMESUR® software, single license, vertical, 1,500 lbF / 6.7 kN, 110V*
F1505S-IM Test frame with IntelliMESUR® software, single license, vertical, short, 1,500 lbF / 6.7 kN, 110V*
* All test frame models contain a universal power supply (80 - 240V) and power cord with US prong style. Add suffix ‘E’ for
European prong, ‘U’ for UK prong, or ‘A’ for Australian prong. Ex: F505-IMTE.
www.mark-10.com 57
Motorized Force Testers IntelliMESUR®
Model No. Description
Optional Equipment
IMF001 COF testing module for IntelliMESUR®
CERT-DS Certificate of calibration, distance and speed
AC1094-1 Single column extension, 6 in / 150 mm, F105 / F305 / F505
AC1094-2 Single column extension, 12 in / 300 mm, F105 / F305 / F505
AC1094-3 Single column extension, 24 in / 600 mm, F105 / F305 / F505
AC1094-4 Single column extension, 6 in / 150 mm, F505H
AC1094-5 Single column extension, 12 in / 300 mm, F505H
AC1094-6 Single column extension, 24 in / 600 mm, F505H
AC1095-1 Double column extension, 6 in / 150 mm, F105 / F305 / F505
AC1095-2 Double column extension, 12 in / 300 mm, F105 / F305 / F505
AC1095-3 Double column extension, 24 in / 600 mm, F105 / F305 / F505
AC1092-1 Shield, 51.9" height
AC1092-2 Shield, 34.4" height
AC1085 Control panel tabeltop mounting kit
AC1093 USB hub
AC1083 Adapter, FS05 sensor / PTAF adapter, to Plug & Test® connector / F755, F755S, F1505, F1505S test frames, 10 in / 250 mm cable
AC1084 Extension cable for AC1083, 24 in / 610 mm, Plug & Test®, male/female
PTAF Adapter, Plug & Test®, customer-supplied force sensor to Series F test frames
15-1019 IntelliMESUR® software, customer installation on a Windows device, additional seat
DC5000 EasyMESUR® control panel, with test frame mounting hardware
58
Motorized Force Testers IntelliMESUR®
IntelliMESUR® / EasyMESUR® Comparison Chart
= included = optional = not available
Feature / Specification IntelliMESUR® EasyMESUR®
Basic test wizards
Multi-step tests
Extended speed ranges
Distance measurement, distance limits, and preload
Auto-return and cycling
Break detection
Load holding
FollowMe® crosshead positioning
Batch testing
Operator prompting
Pass / fail limits
Report creator
Results Large selection 1 per test
Graphing and statistics
Overlay previous runs on graph
PC control via third-party application
Coefficient of friction (COF) measurement
Overload protection
Accuracy - force sensor ±0.1% or ±0.15% of sensor full scale
Accuracy - test frame ±0.1% of sensor full scale
Distance resolution 0.0005 in [0.01 mm] 0.001 in [0.02 mm]
System deflection compensation
±0.002 in [0.05 mm], ±0.006 in [0.15 mm],
Accuracy - distance
at any load or position at any load or position
Accuracy - speed 0.2% of setting
Peak load capture rate 20,000 Hz 5,000 Hz
Data acquisition rate 1,000 Hz 100 Hz
Number of data points per run 1,000,000 100,000
Users and permissions 3 permission tiers, unlimited users 1 tier (password access)
Runs on Windows tablet or PC Control panel only
www.mark-10.com 59
Torque Testers
www.mark-10.com/torque-testers
Series TSTM-DC / TSTMH-DC
Torque, Motorized, 200 lbFin / 22 Nm
Series TSTM-DC advanced motorized torque test stands
are designed for a wide variety of applications, including
closure torque testing, fastener torque testing, and more.
Two torque capacities are available, 100 lbFin (11.5 Nm)
and 200 lbFin (22 Nm).
The stands include a torque loading plate with tapped
holes for grip and fixture mounting. Stepper motor design
eliminates speed variation with load. A lever-operated
slider with travel stops makes engaging and disengaging
samples quick and efficient. A modular mechanical
design allows the stand to be configured for a variety of
applications.
The controller features an integrated angle display and
output, programmable angle travel limits, PC control
capability, programmable cycling, auto return, overload
protection, password protection, and more.
Features
Broad speed range
Set the rotational speed from 0.01 to 60 RPM (0.05 -
360°/s).
TSTM-DC No speed variation with load
Stepper motor control eliminates any speed variation,
regardless of the torque produced.
W Fixture mounting table
with angle indicator
Rotating torque plate includes a
matrix of tapped holes for grip or
fixture mounting.
Integrated digital angle indicator
Measures in degrees or revolutions, with RS-232
output. USB converter available.
Cycle between angle or torque limits
PC control via 3rd party applications
TSTMH-DC
Custom column lengths
60
Torque Testers
Specifications
TSTM-DC / TSTMH-DC: 100 lbFin [11.5 Nm]
Maximum torque:
TSTM-DC-1 / TSTMH-DC-1: 200 lbFin [22.0 Nm]
TSTM-DC / TSTMH-DC: 0.01 - 15 RPM [0.05 - 90°/s]
Speed range:
TSTM-DC-2 / TSTMH-DC-2: 0.04 - 60 RPM [0.2 - 360°/s] *
Speed accuracy: ±0.2% of setting, ±0% variation with load
Rotational travel accuracy: ±0.7° [0.002 rev.]
Rotational travel resolution: 0.1° [0.01 rev.]
Rotational travel repeatability: 0.1° [0.0003 revolutions]
Throat: 4.10" [104 mm]
Manual adjustment: 12° / adjustment knob revolution
Maximum slider travel: 15.5" [394 mm]
Slider travel rate: 1.047” [26.6 mm] / lever revolution
Universal power supply: 80-250 VAC
* Maximum torque decreases proportionately with speed, as follows:
- Maximum torque at 30 RPM = 50 lbFin [5.6 Nm]
- Maximum torque at 60 RPM = 25 lbFin [2.8 Nm]
Ordering Information
Model No. Description
TSTM-DC Torque stand, motorized, vertical, 110 V*
TSTMH-DC Torque stand, motorized, horizontal, 110V*
TSTM-DC-1 Torque stand, motorized, vertical, 200 lbFin, 110V *
TSTMH-DC-1 Torque stand, motorized, horizontal, 200 lbFin, 110V *
TSTM-DC-2 Torque stand, motorized, vertical, 60 RPM max, 100 lbFin, 110V *
TSTMH-DC-2 Torque stand, motorized, horizontal, 60 RPM max, 100 lbFin, 110V *
Additional Items To Consider
AC1108 Multi-function cable, M7I/M5I indicator to test stand
AC1104 Serial cable, test stand to PC
RSU100 Communication adapter, RS-232 to USB
TSF002 Horizontal / wall mounting kit
AC1016 Mounting adapter, MR55-200 to test stand
SP-2736-12 Column extension, 12 in. / 305 mm
SP-2736-24 Column extension, 24 in. / 610 mm
SP-2736-42 Column extension, 42 in. / 1065 mm
SP-2496 Upgrade to 200 lbFin, factory retrofit
SP-2624 Upgrade to 60 RPM, factory retrofit
www.mark-10.com 61
Torque Testers
Model TST / TSTH
Torque, Manual, 100 lbFin / 11.3 Nm
These manually operated torque test stands are ideal for a
wide variety of applications requiring up to 100 lbFin (11.3
Nm) of torque, including closure torque testing, fastener
torque testing, and more. Smooth hand wheel operation
ensures ease of use and a lever-operated slider with travel
stops makes engaging and disengaging samples quick
and efficient. The stand includes a torque loading plate
with tapped holes for grip and custom fixture mounting
and an angle dial indicator with 2° resolution and unlimited
angular travel. Modular mechanical design allows the
stand to be configured for a variety of applications.
Features:
Lever operated slider
For simply and quickly engaging and disengaging
samples.
W Fixture mounting table with
angle indicator
Rotating torque plate includes
a matrix of tapped holes for
grip or fixture mounting
W Optional digital angle
TST
indicator (TST001)
seful in torsion spring testing,
U
bottle cap testing, catheter
testing, and other applications.
TSTH
62
Torque Testers
Specifications
Torque capacity: 100 lbFin [11.3 Nm]
Maximum angular travel: No limit
Angular rate: 12° per hand wheel revolution
Angle indicator resolution: 2°
Maximum slider travel: 15.5 in [394 mm] (column extensions available)
Slider travel rate: 1.047 in [26.6 mm] / lever revolution
Weight TST: 33 lb [15 kg] / TSTH: 27 lb [12.3 kg]
(without optional equipment):
Warranty: 3 years (see individual statement for further details)
Ordering Information
Model No. Description
TST Torque test stand, vertical, lever-operated, 100 lbFin
TSTH Torque test stand, horizontal, lever-operated, 100 lbFin
TST001 Digital angle display for TST/TSTH, 110V
TST001E Digital angle display for TST/TSTH, 220V Euro
SP-2736-12 Column extension, 12 in. / 305 mm
SP-2736-24 Column extension, 24 in. / 610 mm
SP-2736-42 Column extension, 42 in. / 1065 mm
www.mark-10.com 63
Software
www.mark-10.com/software
MESUR®gauge Plus Software
MESUR®gauge Plus expand the functionality of force and torque measuring
instruments and test stands. Both programs share the ability to capture and display
data in graphical format for load vs. time or load vs. travel vs. time. MESUR®gauge Plus
adds the ability to control the motion of certain legacy Mark-10 Series ESM motorized
test stands, coordinating motion control and data acquisition.
Free 90-day demo download available at mark-10.com/mesurgauge
Features:
Tabulate and plot continuous or Statistical calculations of acquired
single-point data data. Automatically recalculates for
MESUR®gauge Plus starts and stops custom ranges.
certain model motorized test stands, One-click export to Excel
coordinating motion control and data Customize test setups for future recall
collection with just one click
Customize reports and templates
Real time tabular and graphical data
acquisition of load vs. time or load vs. Configure certain Mark-10 gauges
travel vs. time and indicators through a simple
interface
C
onfigurable start and stop test trig-
gers (time, load, number of samples, V
iew real time data on a large simu-
or distance) lated instrument display
S View real time data in graphical and S Analyze test data via x-y cursor and S Generate reports, including test
tabular formats. Also, remotely zero the statistical calculations for specified re- data, graph, statistics, date and
force gauge or test stand travel display. gions. Tests may be saved and recalled, time, and user-configurable fields.
and data may be exported to Excel with
one click.
Ordering Information:
Model No. Description
15-1005 MESUR®gauge Plus software*
15-1005-5 MESUR®gauge Plus software, 5 licenses*
15-1006 Upgrade, MESUR®gauge to MESUR®gauge Plus*
* Minimum required test stand controller firmware versions for motion control:
ESM303 / ESM303H: Front: 2.02.04, Main: 2.02.04
S Configure start and stop conditions,
such as load, break, time, or distance. ESM1500: Front: 2.02.02, Main: 2.02.02
Select either discrete data point collec-
tion or continuous data collection at up
to 50 Hz.
64
Software
MESUR® Lite Software
MESUR® Lite is a basic data collection program for gauges, indicators, and testers.
MESUR® Lite tabulates continuous or single point data from a gauge. Data saved in
the gauge’s memory can also be downloaded in bulk. One-click export to Excel allows
for further data manipulation.
Free download from mark-10.com/mesurlite
Features:
Tabulates continuous, single-point, or saved data from a gauge
One-click export to Excel
Configurable start and stop test triggers
W The Settings tab allows W The Acquisition tab dis-
the user to select gauge plays the current reading
series, COM port, read- and tabulates data. Also
ing mode (discrete or provides a means of down-
continuous data collec- loading saved data from
tion), and start and stop a Mark-10 instrument and
conditions. one-click export to Excel.
Software Comparison Chart
MESUR®gauge MESUR®gauge Plus MESUR® Lite
Compatible equipment Instruments, test stands, travel displays Instruments only
Type of data Load vs. time / load vs. travel / custom Load vs. time only
Motion control of motorized stands
Data tabulation
Export to Excel
Graphing and analysis tools
Max. number of data points Unlimited 5,000
Data sampling rate 0.000001 - 50/sec. 0.1 - 10/sec.
Statistical calculations
Available start conditions Time, load, travel distance Load only
Time, load, sample break,
Available stop conditions Number of data points only
travel distance, number of readings
Configurable pass / fail limits
Reporting Yes, with customizable fields and templates
Save and recall test data
Save and recall multiple test setups
Gauge configuration utility
Large digital display
www.mark-10.com 65
Grips & Attachments
Mark-10 grips and attachments are integral
components of testing systems, designed for a
wide range of tension, compression, and torque
applications. Eye end adapters may be used with some
gauges and sensors for quick-change convenience
and compatibility with third party equipment.
www.mark-10.com/grips
66
Grips & Attachments Tensile / Pull
All dimensions shown as in [mm]
Tensile / Pull
Wedge grips
Heavy-duty grips designed for a range of tensile testing requirements up to 2,000 lbF [10 kN]. Self-tightening stainless
steel serrated or rubber jaw faces engage the sample through a spring loaded knob and rack and pinion type mechanism.
The jaws ride on rollers, eliminating jamming common in conventional wedge grips.
Model No. A B C D E F G
0.375 0.95 5/16-18 0.62
G1061-1
[9.5] [24.1] UNC [15.7]
0 - 0.25
0.75 1.50 5/16-18 1.00
G1061 1.95 2.45 [0 - 6.4]
[19.1] [38.1] UNC [25.4]
[49.5] [62.2]
G1061-2
1.00 1.75 1/2-20 1.13
[25.4] [44.5] UNC 0 - 0.20 [28.7]
G1061-3
[0 - 5.1]
Capacity Weight Included
Model No. Jaw Material / Hardness
lbF [N] lb [kg] Adapters
200 0.50
G1061-1 5/16-18M to #10-32F,
[900] [0.23]
#10-32 M/M stud*,
1200 0.80 5/16-18 M/M stud*
G1061 416 SS / 55 RC
[5,300] [0.36]
G1061-1 G1061 G1061-2 G1061-3
2,000
G1061-2 1/2-20M to 5/16-18F,
[9,000] 0.90
[0.41]
1/2-20 M/M stud*,
50 Neoprene rubber 5/16-18 stud*
G1061-3
[250] Durometer = 70 * Includes jam nuts
Miniature wedge grip
For general low force pull testing applications. The serrated,
self tightening steel jaws are easily opened with a spring-
loaded lever.
Model No. A B C D E F G
1.37 2.49 0.19 0.32 #10-32 0 - 0.09 0.15
G1062
[34.8] [63.1] [4.8] [8.1] UNF [0 - 2.3] [3.9]
Capacity Weight
Model No.
lbF [N] lb [kg]
100 0.08
G1062
[500] [0.04] Includes a #10-32 M/M stud with jam nuts.
Ribbon wrap grip
Secures textile webbing, tape, and braided materials
typically used in construction, shipping, and other 0.24 [6.0]
6.22 [158.0]
industrial uses. Integrated eye end.
Ø1.18 [Ø30.0]
3.15 [80.0]
Capacity Weight
3.98 [101.0]
Model No.
lbF [kN] lb [kg]
2,000 5.2
G1111
[10] [2.4] 0.39 [10.0] 0.63 [15.9] Ø0.32 [Ø8.0]
2.05 [52.0]
www.mark-10.com 67
Grips & Attachments Tensile / Pull
Miniature component grip
For testing small and hard-to-reach electronic and
mechanical components. Slender profile allows this grip to
be used in a wide range of applications.
Capacity Weight
Model No. A B C D E
lbF [N] lb [kg]
30 0.05 0.5 1.7 0.5 0 - 0.07 0.15
G1003
[150] [0.02] [12.7] [43.2] [12.7] [0 - 1.8] [3.8]
Includes a #10-32 M/M stud with jam nuts.
Multi-jaw grip
For gripping round or odd shaped items. Jaws expand and
retract by rotating the housing.
Capacity Weight
Model No. ØA B C ØD E ØF
lbF [N] lb [kg]
2.30
100 0.30 3.50 1.63 1.55 0.075 0.40 - 1.25
G1056 [58.4]
[500] [0.14] [88.9] [41.4] [39.4] [1.91] [10.2 - 31.7]
MAX
Includes a #10-32 M/M stud with jam nuts.
Clevis grip
For ergonomic assessment, spring testing, and other pull
testing applications.
Capacity Weight
Model No. A B C D E ØF
lbF [N] lb [kg]
500 0.29 1.70 1.25 0.38 0.85 1.45 0.25
G1077
[2,500] [0.13] [43.2] [31.8] [9.7] [21.6] [36.8] [6.3]
Includes a 5/16-18M to #10-32F thread adapter, 5/16-18 M/M stud with jam nuts, and
#10-32 M/M stud with jam nuts.
High capacity clevis grip
High capacity grip for spring testing and pulling
testing applications. Integrated eye end.
Capacity Weight
Model No.
lbF [kN] lb [kg]
G1090 2,000 [9] 0.78 [0.35]
A B C ØD E F ØG ØH ØI
2.77 1.80 0.55 1.40 2.32 0.87 0.63 0.32 0.38
[70.4] [45.7] [14.0] [35.6] [58.9] [22.1] [15.9] [8.0] [9.7]
68
Grips & Attachments Packaging / Peel / Friction
Packaging / Peel / Friction
Film and paper grips
#10-32 UNF A
For gripping film, paper, and other thin materials for
tensile and peel testing. Adjustable serrated interlocking
B
jaws grip the sample securely.
D
Capacity Weight G1008
Model No. A B C D C
lbF [N] lb [kg]
0.39 1.25 2.50 1.2 0 - 0.15
G1008
[0.18] [31.8] [63.5] [30.5] [0 - 3.8]
#10-32 UNF
0.65 3.00 E
G1015-1
100 [0.29] [76.2]
[500] 0.80 5.00 3.00 1.90 0 - 0.50 B
G1015-2
[0.36] [127.0] [76.2] [48.3] [0 - 12.7]
0.90 7.00 A D
G1015-3 C
[0.41] [177.8] G1015-X
50 0.08 2.85 0.5 0.5 0 - 0.15
G1124 #10-32 UNF
[250] [0.04] [72.4] [12.7] [12.7] [0 - 3.8] E
Includes a #10-32 M/M stud with jam nuts. B
A D
C G1124
Pneumatic film and paper grip
Fully enclosed, air-powered grip for seal strength testing of packaging, elongation testing of various materials, and other
tensile testing requirements. Serrated interlocking jaws effectively grip samples for up to 100 lbF of force. The grip features
a unique integrated open/close valve for quick sample engagement and disengagement. An air connection kit, consisting
of tubing and fittings needed to connect two grips, is available separately. A membrane repair kit is also available.
Weight Max. pressure Air input
Model No. Capacity A
lb [kg] PSI (MPa) thread
100 lbF [500 N] at 0.58 125 0 - 0.13
G1046 #10-32 UNF
100 PSI [0.86 MPa] [0.26] [0.86] [0 - 3.3]
Includes a #10-32 M/M stud with jam nuts, one spare rubber membrane*, one alcohol
wipe, and two cotton swabs.
The optional air connection kit includes:
Coiled tubing, 1/8” OD, 1/16” ID, 8” retracted length (qty. 2)
Y-splitter (qty. 1)
Straight tubing, 1/8” OD, 1/16” ID, 5’ length (qty. 1)
Elbow fitting, tubing termination (qty. 2) The optional maintenance kit* includes:
Elbow fitting, tubing to #10-32M (qty. 1) 1. Rubber membrane (qty. 5)
Thread adapter, #10-32F to 1/4” NPT M (qty. 1) 2. Alcohol wipe (qty. 5)
Adhesive-backed guide (qty. 4) 3. Cotton swab (qty. 12)
4. Wrench set
Model No. Description
AC1019 Air connection kit for G1046
AC1044* Maintenance kit for G1046*
* The flexible internal membrane actuating the movable jaw has a variable life expectancy dependent upon the maximum air pressure used and the quality of the com-
pressed air. It should be free from impurities, solvents and oils. Since field conditions are outside of Mark-10’s control, the standard 3-year warranty does not apply to the
flexible membrane. For convenience, a spare membrane and alcohol wipe is included with every new grip.
www.mark-10.com 69
Grips & Attachments Packaging / Peel / Friction
90° peel fixture
For testing adhesive strength of tapes, films, and packaging. Maintains a 90° angle between the table and direction of
pull. An integrated limit switch automatically stops the motion of most motorized test frames when the working table has
reached its end of travel. Optional adjustable angle accessories allow for testing between 0° and 90°.
#10-32 UNF
X34
4.60 [116.8]
5.50 [139.7]
1.00 [25.4] TYP
1.00 [25.4] TYP
8.30 [210.8] 13.60 [345.4]
2.42 [61.5]
4.15 [105.4]
Capacity Weight
Model No. Description
lbF [N] lb [kg]
G1109 90° peel fixture 100 [500] 6.0 [2.7]
AC1078 Adjustable angle pulley adapter, 0-90° 30 [150] 1.4 [0.6]
AC1079 Adjustable angle mount, ±30° 100 [500] 1.7 [0.8]
AC1080 Adapter, G1023 / G1058 grip to G1109 100 [500] 0.4 [0.2]
AC1087 Adapter, G1109 - -
AC1078 AC1079 AC1080
G1109 is compatible with the following test stands and frames:
F105, F305, F505, F755*, F755S*, F1505*, F1505S*, ESM303, ESM750LC*,
ESM750SLC*, ESM1500LC*, ESM1500SLC*
* AC1087 adapter required.
Coefficient of friction fixture
For determining friction properties of paper, film, and other thin flexible materials. Conforms to ASTM D1894 and other
relevant standards. Includes work table, 200 g sled, cable, and low-friction pulley. Static and kinetic coefficients can be
measured using the M5-2-COF gauge.
Model No. Description
G1086 Coefficient of friction fixture
Kit - G1086 COF fixture + M5-2-COF
COF-K1
force gauge
Pair of mounting posts for F1505,
F1505S, ESM750, and ESM750S (AC1055
AC1076-1
mounting plate required for ESM750 /
ESM750S)
Pair of mounting posts for ESM1500
AC1076-2 and ESM1500S (AC1055 mounting plate
required)
Compatible with the following test frame models:
F105, F305, F505, F755, F755S, ESM303.
70
Grips & Attachments Packaging / Peel / Friction
Score bending fixture
Produces a 90° bend in fiber board materials and plastics to conform to TAPPI standard T829. Set of upper and lower dies.
Capacity Weight
Model No.
lbF [N] lb [kg]
50 Upper die: 0.15 [0.67]
G1071
[250] Lower die: 0.30 [0.14]
Upper die includes a 5/16-18M to #10-32F thread adapter and #10-32
M/M stud with jam nuts.
Mounts directly to the following test frames (motorized test frames
recommended):
- F105, F305, F505, F755, and F1505 test frames.
- ESM303, ESM750, ESM1500, ES30, TSC1000, and TSF test stands.
- Also compatible with models ES10/ES20 test stands when ordered
with optional AC1060 mounting plate.
Opening force fixture
For determining the opening force
of flat folded cartons along score
lines. Set of upper and lower dies.
Capacity Weight
Model No.
lbF [N] lb [kg]
50 Upper die: 0.06 [0.03]
G1072
[250] Lower die: 0.10 [0.05]
A B C D Upper die includes a 5/16-18M to #10-32F thread adapter and #10-32 M/M stud with jam nuts.
0.75 1.00 0.50 0.25 Mounts directly to the following test frames (motorized test frames recommended):
[19.1] [25.4] [12.7] [6.4]
- F105, F305, F505, F755, and F1505 test frames.
- ESM303, ESM750, ESM1500, ES30, TSC1000, and TSF test stands.
- Also compatible with models ES10/ES20 test stands when ordered with optional AC1060 mounting plate.
Loop tack fixture
For tack force testing of pressure-sensitive adhesives,
in conformance with ASTM D6195 and related
standards. A looped sample is loaded onto the test
strip, and the closed end of the loop is secured by an
upper grip (not included - suggested model: G1008,
pictured below). The test strip may be indexed in three
positions, allowing for three tests to be performed
between cleaning cycles.
Capacity Weight* Test strip
Model No.
lbF [N] lb [kg] material
100 1.10 T304 SS,
G1098
[500] [0.5] per ASTM A666
* Including one test strip.
Includes a 5/16-18 M/M stud with jam nuts.
www.mark-10.com 71
Grips & Attachments Packaging / Peel / Friction
Flip cap pull grip
#10-32 UNF
Engages the tab on a flip cap for pull-off
force measurements. A spring-loaded hook
retracts as it is lowered into the starting
position, then snaps into place below the tab.
Capacity Weight
2.00 [50.8] Model No.
lbF [N] lb [kg]
20 lbF 0.10 lb
G1104
0.52 [13.3] [100 N] [0.04 kg]
Includes a #10-32 M/M stud with jam nuts.
0.19 [4.8] 0.36 [9.1]
Ø0.50 [12.7] 0.79 [20.1]
Cork pull fixture
3.55 [90.2] Extracts a cork stopper from a bottle for pull
force measurements, in conformance with
5.16 [130.9] ISO 9727.
Capacity Weight
Model No.
9.24 [234.6] 3.05 [77.5] lbF [N] lb [kg]
5.50 [139.7]
200 lbF 9.5 lb
G1105
1.50 [38.1]
[1000 N] [4.3 kg]
Includes a G1035 large hook, G1018-2 swivel adapter,
and test stand mounting hardware. Recommended for
use with a motorized test frame.
18.13 [460.5]
4.75 [120.7]
4.49 [113.9]
4.30 [109.2]
1/2-20 UNF-2B THRU
Ø0.20 [Ø5.1]
2.00 [50.8] 3.05 [77.5]
2.00 [50.8]
7.75 [196.9]
72
Grips & Attachments Vise / Parallel Jaw
Vise / Parallel Jaw
Parallel jaw / vise-action grip, small
For general tensile and pull testing applications.
Capacity Weight
Model No. A B C D
lbF [N] lb [kg]
200 0.65 1.75 2.25 1.25 0 - 0.25
G1013
[1,000] [0.29] [44.5] [57.2] [31.8] [0 - 6.3]
Includes a 5/16-18M to #10-32F adapter and #10-32 M/M stud with jam nuts.
Parallel jaw / vise-action grip, medium
For general tensile and pull testing
applications. Integrated eye end.
Capacity Weight Housing Jaw
Model No.
lbF [N] lb [kg] Material Material
200 1.0 Hardened
G1101 Aluminum
[1,000] [0.5] steel, 58 RC
Extended length jaws are available: 1.97 in [50.0 mm],
3.15 in [80.0 mm], 3.94 in [100.0 mm]. See website for
details.
Parallel jaw / vise-action grip, large
For general tensile and pull testing
applications. Includes an adjustable
stop to ensure consistent sample
placement. Integrated eye end.
Capacity Weight Housing
Model No. Jaw Material
lbF [kN] lb [kg] Material
2,000 5.9 Hardened
G1100 Aluminum
[9] [2.7] steel, 58 RC
3.94 in [100.0 mm] extended length jaws are available. See
website for details.
www.mark-10.com 73
Grips & Attachments Vise / Parallel Jaw
Vise grip, standard
General purpose vise for a wide range of tension
and compression testing applications.
Capacity Weight
Model No.
lbF [N] lb [kg]
500 2.0
G1074
[2,500] [0.9]
A B C D E F G
1.00 0.50 1.50 2.00 2.50 0 - 1.50 1.00
[25.4] [12.7] [38.1] [50.8] [63.5] [0 - 38.1] [25.4]
Mounts directly to the following test frames:
‐ F105, F305, F505, F755, and F1505.
‐ ESM303, ESM750, ESM1500, ES30, TSC1000, and TSF.
‐ Also compatible with models ES10/ES20 when ordered with optional
AC1060 mounting plate. A motorized test stand is recommended.
Vise grip, self-centering
General purpose vise, for a wide range of tension
5.50 [139.7] and compression testing applications. Self-
centering, replaceable jaws can be field-modified
4.75 [120.7]
4.35 [110.5]
1.75 [44.5]
1.35 [34.3]
1.20 [30.4]
to improve sample gripping characteristics.
Capacity Weight
Model No.
1.90 [48.3]
lbF [N] lb [kg]
R0.10 [R2.5]
500 3.00
R0.18 [R4.4] G1106
[2,500] [1.36]
1.29 [32.6]
0.35 [8.9]
2.18 [55.4]
MAX
Mounts directly to the following test frames (motorized test frames
1.00 [25.4]
recommended):
3.53 [89.6]
1.25 [31.7] ‐ F105, F305, F505, F755, and F1505.
1.13 [28.6] ‐ ESM303, ESM750, ESM1500, ES30, TSC1000, and TSF.
7.93 [201.5]
‐ Also compatible with models ES10/ES20 test stands when ordered
2.10 [53.3] with optional AC1060 mounting plate.
1.25 [31.7] #10-32 X 0.25 DP.
X2
2.00 [50.8]
0.93 [23.5]
0.39 [9.8] 2.10 [53.3] 0.35 [8.9]
3.05 [77.5]
74
Grips & Attachments Wire / Rope / Yarn / Tubing
Wire / Rope / Yarn / Tubing
Wire terminal grips
Secures wire terminals, cables, connectors, and other
samples for pull testing.
Capacity Weight
Model No. ØA B C D
lbF [N] lb [kg]
0 - 0.125
G1001
[0 - 3.1]
200 0.29 1.00 3.40 0.125 - 0.25
G1001-1 1.45 [36.8]
[1,000] [0.13] [25.4] [86.4] [3.1 - 6.3]
0.25 - 0.375
G1001-2
[6.3 - 9.5]
Includes a 5/16-18M to #10-32F adapter and #10-32 M/M stud with jam nuts.
Wire terminal grip, turret style
Secures wire terminals, cables, connectors, and other
samples for pull testing. Indexing wheel contains slots
of varying widths to accommodate a wide range of
sample shapes and sizes.
Capacity Weight
Model No. Slot Widths
lbF [N] lb [kg]
0.03 [0.7], 0.04 [1.0], 0.06 [1.5], 0.08 [2.0],
500 0.09 [2.3], 0.11 [2.8], 0.12 [3.0], 0.14 [3.5], 1.00
G1076
[2,500] 0.15 [3.8], 0.17 [4.3], 0.18 [4.5], 0.20 [5.1], [0.45]
0.21 [5.3], 0.23 [5.8], 0.25 [6.3]
Includes a 5/16-18M to #10-32F adapter and #10-32 M/M stud with jam nuts.
High capacity wire terminal grip
Secures wire terminals, cables, connectors, and other
samples for pull testing. Indexing wheel contains slots
of varying widths to accommodate a wide range of
sample shapes and sizes. Integrated eye end.
Capacity Weight
Model No. Slot Widths
lbF [kN] lb [kg]
0.08 [2.0], 0.12 [3.0], 0.16 [4.0],
2,000
G1093 0.20 [5.0], 0.24 [6.0], 0.31 [8.0], 6.4 [2.9]
[9]
0.39 [10.0], 0.46 [11.8]
www.mark-10.com 75
Grips & Attachments Wire / Rope / Yarn / Tubing
Dual roller grips
Secures the ends of wire, cable, and tubing samples for
pull testing. Engaging and disengaging samples is quick
and easy via an efficient cam design and convenient side
slot for sample insertion. Serrated steel rollers produce
effective gripping characteristics.
Capacity Weight
Model No. A B C D E F G
lbF [N] lb [kg]
200 0.19 1.18 2.00 0.75 0 - 0.25 0.22 0.64 1.0
G1002
[1,000] [0.09] [30.0] [50.8] [19.1] [0 - 6.3] [5.6] [16.5] [25.4]
Includes a #10-32 M/M stud with jam nuts.
Adjustable dual roller grip
Secures tubing, cables, and odd shaped samples for pull
testing applications. Engaging and disengaging samples
is quick and easy, with a side slot for sample insertion
and serrated steel rollers. Rollers can be repositioned as
required for the application.
Capacity Weight
Model No. A B C D E F G
lbF [N] lb [kg]
500 0.51 2.40 2.45 1.30 0 - 1.00 0.34 1.20 1.78
G1085
[2,500] [0.23] [61.0] [62.2] [33.0] [0 - 25.4] [8.6] [30.5] [45.3]
Includes a 5/16-18 M/M stud with jam nuts.
Miniature filament grip
Secures small diameter wires and filaments. The sample
wraps around the bollard and the loose end is secured
by the adjustable jaw. Integrated swivel ensures sample
alignment under load.
Capacity Weight
Model No. A B C D E F G
lbF [N] lb [kg]
50 0.06
G1078 2.38 [60.4] 1.09 [27.7] 0.10 [2.5] 0.10 [2.5] 0.55 [14.1] Ø0.45 [11.4] 0.20 [5.1]
[250] [0.03]
Includes #10-32 M/M stud with jam nuts.
76
Grips & Attachments Wire / Rope / Yarn / Tubing
Wire / rope grip, medium
Secures wire and rope. The sample wraps
around the bollard and the loose end is
secured by the adjustable rubber-faced
jaw. Integrated eye end.
Capacity Weight
Model No.
lbF [N] lb [kg]
200 0.6
G1103
[1,000] [0.6]
Wire / rope grip, large
Secures wire and rope. The sample wraps
around the bollard and the loose end is
secured by an adjustable jaw. Integrated
eye end.
Capacity Weight
Model No.
lbF [N] lb [kg]
1,000 1.8
G1102
[5,000] [0.8]
Wire / rope grip, high capacity
For high capacity wire and rope pull
testing applications. Secures the free
end of the sample via a bollard and vise.
Integrated eye end.
Capacity Weight
Model No.
lbF [kN] lb [kg]
2,000 6.0
G1092
[9] [2.7]
High capacity eccentric roller grip
Features a serrated cam for effectively
securing wires, plastics, textiles, and other
materials in pull testing applications.
Integrated eye end.
Capacity Weight
Model No.
lbF [kN] lb [kg]
2,000 7.4
G1094
[9] [3.4]
www.mark-10.com 77
Grips & Attachments Compression / Bend / Push
Compression / Bend / Push
Compression plates
For compressing springs, foams, cartons, aerosol cans,
and many other products and materials.
Capacity Weight
Model No. ØA Thread Material
lbF [N] lb [kg]
200 0.08 2.0 #10-32
G1009
[1,000] [0.04] [51.0] UNF Alumi-
500 0.27 3.0 5/16-18 num
G1009-1
[2,500] [0.12] [76.2] UNC
G1009 includes a #10-32 M/M stud with jam nuts.
G1009-1 includes a 5/16-18M/M stud with jam nuts.
High capacity compression plates
For compression spring testing, top load testing, and
other applications. Inegrated eye end.
Capacity Weight
Model No. ØA B Material
lbF [kN] lb [kg]
2,000 1.50 3.78 1.28
G1087
Ø3.07 [Ø78.0] [9] [55.9] [96.0] [32.5]
303 SS
2,000 0.63 2.20 1.18
G1087-1
[9] [0.29] [55.9] [30.0]
Self-aligning compression plate
This self-aligning compression plate adjusts to the angle
Ø0.31 [Ø8.0] THRU
Ø1.34 [34.0]
of the sample via four adjustable screws and nuts. Ideal for
Ø0.63 [15.9]
0.42 [10.6] ensuring parallelism and complete sample engagement,
particularly for low-deflection springs and other materials
with high spring rates. Integrated eye end.
2.15 [54.6]
Capacity Weight
Model No. Material
lbF [kN] lb [kg]
Ø2.30 [58.3]
2.80 2.80
G1123 Steel 58 HRC, nickel-plated
[1.27] [1.27]
78
Grips & Attachments Compression / Bend / Push
Bend fixtures
Family of fixtures for 3-point and G1095
4-point bend testing of plastics,
metals, ceramics, tubing, and
many other materials. Two base
sizes are available, along with an
upper anvil, and optional support
diameters. Use a base-anvil
combination for 3-point bend
testing or two bases for 4-point
bend testing.
G1096
3-point bend
G1097
4-point bend
Capacity Weight Housing Block Support
Model No. Includes
lbF [kN] lb [kg] material material material
G1095 500 [2.5] 3.0 [1.3] 2024 Al 303 SS 416 SS, hardened Two 10 mm dia. supports and o-rings
G1096 2,000 [10] 7.1 [3.2] 2024 Al 303 SS 416 SS, hardened Two 10 mm dia. supports and o-rings
G1097 2,000 [10] 0.5 [0.2] 303 SS - 416 SS, hardened 10 mm. dia. supports and o-rings
Includes mounting hardware for motorized test frames and most manual test stands, except TSA750 and TSB100. May also be mounted via integrated eye end.
Optional Items
Model No. Description
AC1067 Supports for bend fixtures, 1 mm dia., set of 4
AC1067-1 Supports for bend fixtures, 2 mm dia., set of 4
AC1067-2 Supports for bend fixtures, 5 mm dia., set of 4
www.mark-10.com 79
Grips & Attachments Compression / Bend / Push
Syringe compression fixture
For testing compression force of a
syringe plunger, as per ISO 7886-1 and
other relevant standards.
Capacity Weight
Model No.
lbF [N] lb [kg]
100 1.89
G1089
[500] [0.86]
Includes:
1. Frame
2. Replaceable blank inserts (4)
3. Cup tray
4. G1009 compression plate
5. 5/16-18 M/M stud with jam nuts
6. # 10-32 x 0.5” mounting screws
for test frame
Padded attachments
For applications in physical therapy and ergonomics, including muscle strength
testing, job task requirements, and more.
Capacity Weight
Model No.
lbF [N] lb [kg]
500 0.03
G1019 G1020 G1021 G1112 G1019
[2,500] [0.01]
500 0.13
G1020
[2,500] [0.06]
5/16-18 UNC 500 0.25
G1021
[2,500] [0.11]
500 0.28
G1112
[2,500] [0.13]
Includes a 5/16-18M to #10-32F
0.84 [21.3] thread adapter, 5/16-18 jam nut,
and #10-32 jam nut.
Ø2.98 [75.7]
80
Grips & Attachments Compression / Bend / Push
Puncture fixture
For determining puncture resistance 9.69 [246.0]
of plastic films and other thin materials. 0.89 [22.5]
Includes fixture and probe. Integrated 0.39 [10.0]
eye end.
5.91 [150.0]
4.53 [115.0]
Capacity Weight
Model No.
lbF [kN] lb [kg]
1,000 Fixture: 19.0 [8.6]
G1110
[5] Probe: 0.4 [0.2]
15.20 [386.0]
4.02 [102.0]
5.98 [152.0]
R0.38 [R9.5]
7.68 [195.0]
1.30 [33.0] 1.18 [30.0] Ø0.32 [Ø8.0]
0.39 [10.0] 0.63 [15.9]
9.21 [234.0]
Magness Taylor Food Texture Probes
For penetrating fruits, vegetables, and
other foods, for determining puncture
resistance and ripeness.
RB
Select from standard Magness Taylor
diameter sizes of 5/16" and 7/16", each
ØA Ø0.06 [Ø1.6]
with a flat and rounded end. 5.00 [127.0]
A G1010-2 Jacobs chuck grip is required
to mount a probe to a Mark-10 force
sensor or force gauge. Ø0.65 [16.5]
P/N ØA RB
G1122-1 0.31 [7.9] 0.19 [4.8]
Capacity G1122-2 0.18 [4.6] EXTENDED
0.44 [11.1] 0.35 [8.9]
Model No. Material ØA RB
lbF [N]
0.31 0.19
G1122-1
100 [7.9] [4.8] 0.36 [9.0]
303 SS
[500] 0.44 0.35
G1122-2 Ø0.06 [Ø1.6]
[11.1] [8.9] 1.65 [41.9]
Puncture Fixture Ø0.65 [16.5]
For puncturing gypsum board and 0.18 [4.6] EXTENDED
#10-32 UNF-2B
other materials to determine puncture
resistance. Compatible with all current
Mark-10 force gauges. For added safety, 0.36 [9.0]
the spring-loaded needle retracts when Ø0.06 [Ø1.6]
not actively pushed into a material. 1.65 [41.9]
Capacity Weight Ø0.65 [16.5]
Model No.
lbF [N] lb [kg]
0.18 [4.6] EXTENDED
20 0.04
G1099
[100] [0.02] #10-32 UNF-2B
0.36 [9.0]
1.65 [41.9]
www.mark-10.com 81
Grips & Attachments Compression / Bend / Push
Jacobs chuck pin vises
For securing pins, round samples, and fixtures.
Capacity Weight
Model No. ØA
lbF [N] lb [kg]
0.35 0.062 - 0.375
G1010
[0.16] [1.6 - 9.5]
30 0.25 0.028 - 0.25
G1010-1
[150] [0.11] [0.7 - 6.3]
0.66 0.078 - 0.5
G1010-2
[0.30] [2.0 - 12.7]
Includes a #10-32 M/M stud with jam nuts.
Rubber tip
Simulates a finger for testing pushbuttons, membrane
switches, touch-screen panels, keyboards, etc.
Capacity Weight
Model No.
lbF [N] lb [kg]
50 0.01
G1011
[250] [0.004]
Includes a #10-32 M/M stud with jam nuts.
Torque / Force
Universal bottle grip
ØA 4.50 [114.3] For gripping bottles and containers in closure torque testing
applications. Eight rubber edged gripping arms secure
a wide range of sample shapes and sizes and may be
2.00 [50.8]
individually positioned at angles up to 180°. Mounts directly
to Series TST torque test stands, most force test stands,
Ø0.20 [5.1] and G1109 90° peel fixture for applications such as top load
1.00 [25.4]
testing and 90° peel testing.
7.45 [189.2]
Capacity Weight
Model No. ØA
lbFin [Nm] lb [kg]
3.31 [84.1]
100 1.50 4.80
G1023
[11.3] [0.7] [122.0] MAX
Ø0.188 [4.7]
3.22 [81.8]
Model No. Description
G1023 includes four #10-32 x 1" mounting screws for Series TST test stands or AC1080 Adapter, G1023 to G1109 peel fixture
G1068 adapter.
G1068 includes mounting hardware for the G1023 fixture and the following test
stands: ESM303, ESM1500/750 (w/AC1055 plate), ES30, TSC1000, TSF, ES10/ES20
(w/AC1060 plate)
82
Grips & Attachments Torque / Force
Universal V-jaw grip
#10-32 UNF For gripping round objects. Serrated, reversible
5/16 HEX A
aluminum jaws effectively grip a wide range of
sample shapes and sizes. Mounts directly to
B
Jacobs chucks, force gauges, and test stands.
ØD2 Torque Capacity Force Capacity Weight
C Model No.
lbFin [Nm] lbF [N] lb [kg]
ØD1 100 100 0.40
G1053
[11.3] [500] [0.18]
* Reverse the jaws to switch between ØD1 and ØD2. A B C ØD1* ØD2*
Includes a #10-32 M/M stud with jam nuts. 3.1 1.77 1.6 1.10 - 1.55 0.65 - 1.10
[78.7] [45.0] [40.6] [27.9 - 39.4] [16.5 - 27.9]
Universal cap grip
For securing caps, lids, and other similar items for torque
ØMAX
and pull testing. Accommodates a wide range of sample
sizes, and can be used manually with a torque gauge or B
mounted to a test stand. ØMIN
A
Weight E
Model No. Capacity
lb [kg] D
100 lbFin [11.3 Nm] or 0.65 5/16 HEX
G1058 #10-32 UNF
50 lbF [250 N] [0.29] C
A B C D E ØMIN - ØMAX
0.9 3.8 3.2 2.8 1.0 0.20 - 3.50
[22.9] [96.5] [81.3] [71.1] [25.4] [5.1 - 89.0]
Includes #10-32 M/M stud with jam nuts.
Jacobs chuck grips
For securing round samples, fixtures, or bits in
torque applications. Mounts directly to series TST
torque test stands.
Weight
Model No. Capacity ØA ØB ØC
lb [kg]
0.028 - 0.250
G1022-1
[0.7 - 6.3]
100 lbFin 0.50 0.188 0.062 - 0.375
G1022-2 N/A
[11.3 Nm] [0.23] [4.7] [1.6 - 9.5]
0.078 - 0.500
G1022-3
[2.0 - 12.7]
Includes mounting hardware for Series TST torque test stands.
www.mark-10.com 83
Grips & Attachments Basic Attachments & Adapters
Basic Attachments & Adapters
Hooks
For general pull testing applications.
G1028 G1038
THREAD D THREAD D
THREAD D THREAD D
RA Capacity Weight
RA Model
Model No. RA B ØC D RA B ØC D
Model
G1028
RA
G1028
B
0.05 [1.3]
0.05 [1.3]lbF
1.00 [25.4]
[N]
ØC
1.00
D
lb [kg]
[25.4] 0.10
0.10 [2.5] #10-32F
[2.5] #10-32F
B G1038 0.20[38.1]
[5.1] 1.50 [38.1] 0.19 [4.8] #10-32M
ØC BB B G1038 0.20 [5.1] 1.50 0.19 [4.8] #10-32M
20 0.01 0.05 1.00 0.10
ØC G1035 0.30[55.6]
[7.6] 2.19 [55.6]5/16-18M
0.28 [7.1] 5/16-18M
G1035 0.30 [7.6] 2.19 0.28 [7.1]
ØC ØC G1042 G1028
G1042
0.5 [12.7] 0.5 [12.7]
3.52 [89.4] 3.52
0.45 [89.4]1/2-20M
[11.4] 0.45 [11.4] 1/2-20M #10-32F
RA
RA
G1028
G1028 G1038
G1038
[100] [0.01] [1.3] [25.4] [2.5]
G1035 G1042 200 0.02 0.20 1.50 0.19
G1038 #10-32M
[1,000] [0.01] [5.1] [38.1] [4.8]
G
THREAD D
THREAD D
10
10
10
10
THREAD D
THREAD D
2
38
35
500 0.05 0.30 2.19 0.28
8
RA RA
G1035 5/16-18M
RA
B
RA [2,500] [0.02] [7.6] [55.6] [7.1]
B
B
1,000 0.32 0.5 3.52 0.45
ØC
G1042 1/2-20M
G1035
B
[4,500] [0.15] [12.7] [89.4] [11.4]
ØC
ØC
G1035
ØC G1042
G1042
Snap hook
For general pull testing applications. Features a snap
1.27 [32.2]
5/16-18 UNC clasp, for added safety. Swiveling action ensures
proper alignment.
4.35 [110.5] Capacity Weight
Model No.
lbF [N] lb [kg]
500 0.3
G1107
[2,500] [0.14]
R0.50 [12.7]
Flat heads
For compression testing of buttons, small
springs, membrane switches, etc.
Capacity Weight
Model No. ØA B C
lbF [N] lb [kg]
200 0.01 0.5 0.5
G1029 #10-32F
[1,000] [0.005] [12.7] [12.7]
500 0.06 0.75 0.87
G1036 5/16-18F
[2,500] [0.027] [19.1] [22.1]
Swivel adapters
For use between grips and force gauges and
sensors, to provide a swiveling action for proper
sample alignment.
Capacity Weight
Model No. A B
lbF [N] lb [kg]
200 0.12
G1018-1 #10-32M #10-32F
[1,000] [0.05]
500 0.27
G1018-2 5/16-18M 5/16-18F
[2,500] [0.12]
84
Grips & Attachments Basic Attachments & Adapters
Extension rods
For use between force gauges, sensors, grips, and attachments.
Not recommended for compression applications.
Capacity Weight
Model No. A ØB C D
lbF [N] lb [kg]
0.05 5.0
G1024
[0.023] [127.0]
200 0.02 2.0 0.25
G1024-1 #10-32F #10-32M
[1,000] [0.009] [50.8] [6.4]
0.01 1.0
G1024-2
[0.005] [25.4]
0.25 5.0
G1031
[0.113] [127.0]
500 0.10 2.0 0.50
G1031-1 5/16-18F 5/16-18M
[2,500] [0.045] [50.8] [12.7]
0.25 1.0
G1031-2
[0.113] [25.4]
Chisel points
For compression testing applications.
Capacity Weight
Model No. A ØB C
lbF [N] lb [kg]
200 0.003 0.50 0.25
G1025 #10-32F
[1,000] [0.001] [12.7] [6.4]
500 0.040 1.00 0.50
G1032 5/16-18F
[2,500] [0.018] [25.4] [12.7]
Cone points
For various compression and puncture
testing applications.
Capacity Weight
Model No. A ØB C
lbF [N] lb [kg]
200 0.003 0.50 0.25
G1026 #10-32F
[1,000] [0.001] [12.7] [6.4]
500 0.030 1.00 0.50
G1033 5/16-18F
[2,500] [0.014] [25.4] [12.7]
V-grooves
For compression testing of round or odd-shaped samples.
Capacity Weight
Model No. A ØB C D
lbF [N] lb [kg]
200 0.004 0.50 0.25 0.08
G1027 #10-32F
[1,000] [0.002] [12.7] [6.4] [2.0]
500 0.040 1.00 0.50 0.25
G1034 5/16-18F
[2,500] [0.018] [25.4] [12.7] [6.4]
www.mark-10.com 85
Grips & Attachments Basic Attachments & Adapters
Thread adapters & couplings Studs & jam nuts
For use between gauges, sensors, test stands grips, For use between test stands, grips, and attachments.
and attachments. Suitable for tension and compression
applications.
Capacity Length Capacity
Model No. Thread A Thread B Model No. Thread Length
lbF [N] in [mm] lbF [N]
0.75 100 0.75
G1050 #4-40M #10-32F AC 1082 #10-32M
[19.1] [500] [19.1]
100 0.55 500 1.00
G1051 #4-40M #10-32M AC 1082-1 5/16-18M
[500] [14.0] [2,500] [25.4]
0.75 2,000 1.50
G1113 M3M #4-40F AC 1082-2 1/2-20M
[19.1] [9,000] [38.1]
0.75
G1039 #10-32F #10-32F
[19.1]
0.50
G1030 5/16-18M #10-32F
[12.7]
1.00
G1057 #10-32F M6F
[25.4]
0.50
G1060 #10-32M #10-32M
200 [12.7]
[1,000] 0.75
G1047 #10-32M M4F
[19.1]
0.75
G1048 M4M #10-32F
[19.1]
0.75
G1054 M6M #10-32F
[19.1]
1.30
G1063 #10-32M 5/16-18F
[33.0]
0.92
G1040 5/16-18M 5/16-18M
[23.4]
1.00
G1037 5/16-18F 5/16-18F
[25.4]
1.25
G1049 M6M 5/16-18F
[31.8]
1.13
G1059 5/16-18F 1/2-20F
500 [28.7]
[2,500] 1.06
G1041 1/2-20M 5/16-18M
[26.9]
0.75
G1066 5/16-18F 1/2-20M
[19.1]
0.75
G1067 1/2-20M 10-32F
[19.1]
1.25
G1069 5/16-18F 1/4-28M
[31.8]
1.30
G1091 1/2-20F 1/2-20F
[33.0]
1,000
[5,000] Adapter plate, 1/2-20F. Compatible with
G1044 many test stands. Mounting hardware
included.
86
Grips & Attachments Basic Attachments & Adapters
Eye end adapters
These adapters provide a commonly accepted industry method of attaching
fixtures to force sensors and test frames. They prevent grip rotation and allow
for quick removal and installation.
Several thread sizes and variations are available to suit most common test
frames, force sensors, grips, and force gauges. Eye ends and adapters are
available individually or as kits.
W Eye end adapter is shown with a Mark-10 wedge grip and test frame.
Force sensor / test frame Force gauge configuration
configuration
Item
Model No. Description
No.
1
1 G1079 Lock ring, 3/4-16
1 5
G1081 Eye end, #10-32M
G1081-1 Eye end, 5/16-18M 1
2 G1081-2 Eye end, 1/2-20M 2
G1081-3 Eye end, 1/4-28M 1
3 G1080 Anchor pin 3 4 6
G1083 Eye end adapter, #10-32M
4 G1083-1 Eye end adapter, 5/16-18M 3
G1083-2 Eye end adapter, 1/2-20M 1 4
G1084 Washer, 0.20 ID
5 G1084-1 Washer, 0.32 ID
G1084-2 Washer, 0.51 ID 1
G1082 Eye end, #10-32F
6 G1082-1 Eye end, 5/16-18F
7 G1088 Spanner wrench
4
7
3
www.mark-10.com 87
Grips & Attachments Basic Attachments & Adapters
Eye end adapters - kits
Test Frame Base / Force Sensor Adapter Kits
Model No. Description Compatibility Includes
1x G1081 eye end
Test frame base
AC1047 Test frame bases w/ #10-32 mounting 1x G1080 anchor pin
adapter kit, #10-32M
2x G1079 lock ring
1x G1081-1 eye end
Test frame base AC1047 AC1047-1
AC1047-1 Test frame bases w/ 5/16-18 mounting 1x G1080 anchor pin
adapter kit, 5/16-18M
2x G1079 lock ring
Test frame bases w/ 1/2-20 mounting
Test frame base / 1x G1081-2 eye end
Models MR01-300 / -500 / -750 / -1000 / -1500 / -2000 force sensors
AC1047-2 force sensor adapter 1x G1080 anchor pin
Models MR07-300 / -500 / -750 / -1000 / -1500 / -2000 force sensors
kit, 1/2-20M 2x G1079 lock ring
Models FS06-300 / -500 force sensors
Models MR01-50 / -100 / -200 force sensors 1x G1081-3 eye end AC1047-2 AC1047-3
Force sensor adapter
AC1047-3 Models MR07-50 / -100 / -200 force sensors 1x G1080 anchor pin
kit, 1/4-28M
Models FS06-50 / -100 / -200 force sensors 2x G1079 lock ring
1x G1081 eye end
Force sensor
1x G1080 anchor pin
AC1047-4 adapter, Series R03, Series R03 force sensors
2x G1079 lock ring
#10-32M
1x G1084 washer
AC1047-4
Grip Adapter Kits
Model No. Description Compatibility Includes
Grip adapter kit, 1x G1083 eye end adapter
AC1046 Grips with #10-32 mounting
#10-32M 1x G1079 lock ring
Grip adapter kit, 1x G1083-1 eye end adapter
AC1046-1 Grips with 5/16-18 mounting
5/16-18M 1x G1079 lock ring
AC1046 AC1046-1
Grip adapter kit, 1x G1083-2 eye end adapter
AC1046-2 Grips with 1/2-20 mounting
1/2-20M 1x G1079 lock ring
AC1046-2
Force Gauge / Force Sensor Adapter Kits
Model No. Description Compatibility Includes
1x G1082 eye end
Force gauge adapter Force gauges up to 100 lbF capacity 1x G1084 washer
AC1045
kit, #10-32F Series FS05 force sensors up to 100 lbF load cells 2x G1079 lock ring
1x G1080 anchor pin
1x G1082-1 eye end AC1045 AC1045-1
Force gauge adapter Force gauges with 200, 300, and 500 lbF capacities 1x G1084-1 washer
AC1045-1
kit, 5/16-18F Models FS05-200/-300/-500 force sensors 2x G1079 lock ring
1x G1080 anchor pin
1x G1081-2 eye end
Force gauge adapter 1x G1084-2 washer
AC1045-2 Models M5-750 - M5-2000 force gauges
kit, 1/2-20M 2x G1079 lock ring AC1045-2
1x G1080 anchor pin
88
Grips & Attachments Basic Attachments & Adapters
Eye end adapters - individual attachments
G1081-X eye ends
Weight Capacity
Model No. A Thread
lb [kg] lbF [kN]
G1081 1.82 [46.2] #10-32 0.13 [0.06] 200 [1]
G1081-1 1.88 [47.8] 5/16-18 0.14 [0.06] 500 [2.5]
G1081-2 2.02 [51.3] 1/2-20 0.15 [0.07] 2,000 [10]
G1081-3 1.87 [47.5] 1/4-28 0.13 [0.06] 200 [1]
G1082-X eye ends
Weight Capacity
Model No. Thread
lb [kg] lbF [kN]
G1082 #10-32 0.13 [0.06] 200 [1]
G1082-1 5/16-18 0.14 [0.05] 500 [2.5]
G1083-X eye ends
Weight Capacity
Model No. A Thread
lb [kg] lbF [kN]
G1083 2.10 [53.3] #10-32 0.26 [0.12] 200 [1]
G1083-1 2.16 [54.9] 5/16-18 0.26 [0.12] 500 [2.5]
G1083-2 2.30 [58.4] 1/2-20 0.28 [0.13] 2,000 [10]
G1084-X jam washers
Weight
Model No. ØA
lb [kg]
G1084 0.20 [5.1] 0.03 [0.01]
G1084-1 0.32 [8.2] 0.03 [0.01]
G1084-2 0.51 [12.9] 0.03 [0.01]
G1079 lock ring
Weight
Model No.
lb [kg]
G1079 0.07 [0.03]
G1080 anchor pin G1088 spanner wrench
Weight
Model No.
lb [kg]
G1080 0.06 [0.03]
www.mark-10.com 89
Grips & Attachments Instron Adapters
Grip Adapter Kits for Instron Frames and Load Cells
AC1088-1 AC1088-8 AC1088-9 AC1090-1 AC1090-3
Model No. Description Compatibility Includes
M
ark-10 grips with #10-32 thread to Instron 1x G1083 eye end adapter
AC1088-1 Grip adapter kit, eye end, #10-32M
frames and load cells 2x G1079 lock ring
M
ark-10 grips with 5/16-18 thread to Instron 1x G1083-1 eye end adapter
AC1088-8 Grip adapter kit, eye end, 5/16-18M
frames and load cells 2x G1079 lock ring
M
ark-10 grips with 1/2-20 thread to Instron 1x G1083-2 eye end adapter
AC1088-9 Grip adapter kit, eye end, 1/2-20M
frames and load cells 2x G1079 lock ring
1x G1083-2 eye end adapter
M
ark-10 grips with eye end mounting to Instron
AC1090-1 Eye end adapter kit, 0.23” dia. 2x G1079 lock ring
frames and load cells
1x G1080 anchor pin
1x G1083-2 eye end adapter
M
ark-10 grips with eye end mounting to Instron
AC1090-3 Eye end adapter kit, 0.47” dia. 2x G1079 lock ring
frames and load cells
1x G1080 anchor pin
90
Accessories
www.mark-10.com/accessories
Hardware
Double handle grips Single handle grips
For use in ergonomics testing, job task analysis, and For use in ergonomics testing, job task analysis, and
physical therapy. Includes four gauge mounting screws. physical therapy. Includes four gauge mounting screws.
Model No. Description Model No. Description
AC1002 Double handle grip for Series 7/5/4 gauges AC1002-1 Single handle grip for Series 7/5/4 gauges
AC1003 Double handle grip for Series 3/2 gauges AC1003-1 Single handle grip for Series 3/2 gauges
Inline adapters for force gauges
These adapters allow a force gauge to be used in inline pull testing or weighing applications. A 5/16-18 threaded hole at
each end is axially aligned with the load cell shaft in the force gauge, for mounting hooks or other attachments. Three
adapters are offered, accommodating Mark-10 force gauges with capacities up to 500 lbF (2.5 kN). Includes four gauge
mounting screws and one 5/16-18 male/male stud with jam nuts. 500 lbF (2.5 kN) capacity.
Model No. Description
AC1073-1 Inline adapter, Series 3/2 force gauges
AC1073-2 Inline adapter, Series 7/5*/4 force gauges
AC1073-3 Inline adapter, Series E force gauges
* Up to 500 lbF (2,500 N) capacities
www.mark-10.com 91
Accessories Hardware
Tabletop stand for indicators Competitor gauge mounting kits
and torque gauges Model No. Description Compatible Test Stands
Features an angle adjustment and thru holes for AC1020 Gauge mounting kit, Chatillon DFE/DFS/DFX/LG
workbench mounting. Includes four gauge mounting AC1021 Gauge mounting kit, Chatillon DFM
screws. Compatible with Mark-10 indicators and
AC1022 Gauge mounting kit, Chatillon DFIS
Series TT03 torque gauges. ES10, ES20, ES30, ESM303
AC1023 Gauge mounting kit, Mecmesin AFG/BFG
AC1024 Gauge mounting kit, Imada
AC1025 Gauge mounting kit, Shimpo FGV/FGE
AC1037 Gauge mounting kit, Chatillon DFE/DFS/DFX/LG
AC1038 Gauge mounting kit, Chatillon DFM
AC1039 Gauge mounting kit, Chatillon DFIS TSA750(H), TSC1000(H),
AC1040 Gauge mounting kit, Mecmesin AFG/BFG TSF(H)
AC1041 Gauge mounting kit, Imada ZT/DS2/DPZ/DPS
AC1042 Gauge mounting kit, Shimpo FGV/FGE
Model No. Description
Chatillon TCD200, TCM201,
AC1100 Stand, tabletop, indicator/torque gauge AC1061 Mark-10 force gauges to 500 lbF / 2,500 N
LTCM series
AC1069 Mark-10 force gauges to 500 lbF / 2,500 N Mecmesin test stands
Force gauge mounting plate kits Axial compensator
Universal kits suitable for all Mark-10 force gauges in Compensates for axial
OEM and custom mounting applications. Includes gauge movement in torque tests of
mounting screws and plate mounting screws. threaded fasteners, bottle caps,
etc. The axial compensator has
a hex tail which fits into the
chuck of a Series R50 or TT03
torque gauge, and includes
mounting hardware to mount
AC1052 AC1058
to a G1053 or G1058 grip.
Model No. Description Model No. Description
AC1052 Mounting plate kit, 0.12 - 500 lbF [0.5 - 2,500 N] Mark-10 force gauges AC1029 Axial compensator
AC1007 Mounting plate kit, 0.12 - 2,000 lbF [0.5 N - 10 kN] Mark-10 force gauges
Tabletop mounting kits for torque sensors Test stand mounting kits for remote sensors
For securing Series R50, R52, and Models MR55-200/400 Refer to the compatibility table below:
torque sensors to a workbench.
AC1006 AC1007 AC1010 AC1015 AC1016 AC1018 AC1062
Model No. Description Model No. Sensors Test Stands
AC1006 Mounting kit, R52, tabletop AC1015 Series R51 Series TST torque test stands
AC1007 Mounting kit, R50, tabletop AC1016 Models MR55-200 - MR55-400 Series TST torque test stands
AC1010 Mounting kit, MR55-200/MR55-400, tabletop AC1016-1 Models MR55-20 - MR55-100 Series TST torque test stands
All force test stands, except ESM303(H),
AC1018 Series R01, Series R03 ESM750/ESM1500, and TSB100. Not
compatible with Series F.
AC1062 Series R01, Series R03 ESM303
92
Accessories Hardware
Calibration Kits
Cap torque tester Wire pull tester
calibration kit calibration kit
For calibrating Series TT01 cap For calibrating a WT3-200, WT3-
torque tester. The kit contains 201, or WT3-201M wire crimp pull
a complete set of attachments tester. The kit contains a complete
required to mount the tester to a set of attachments required to
bench, as well as the necessary mount the tester to a bench, as
brackets and cable to mount well as the necessary brackets
weights (weights not included). to mount weights (weights not
included).
Model No. Description Model No. Description
AC1036 Calibration kit for cap torque testers Calibration kit for wire crimp pull
AC1049
testers
Power & Communication
Communication adapters Footswitch for Series 7 instruments
Automates common force gauge
RSU100 MU100 UXU100
functions for improved testing
ergonomics and efficiency,
eliminating the need for multiple
key presses. Up to three
functions may be programmed
for a single footswitch activation,
such as request reading, zero
the display, etc.
Model No. Description
RSU100 Adapter, RS-232 to USB
Model No. Description
MU100 Adapter, Mitutoyo to USB, 6’ cable length
AC1051 Footswitch for Series 7 instruments
UXU100 USB communication adapter
AC adapter/chargers Replacement battery
110V and 220V models available, for use with all Mark-10 Rechargeable 8.4V NiMH battery,
gauges, indicators, and testers.* for use with Mark-10 gauges,
indicators, and testers.
Model No. Description Model No. Description
AC1030 AC adapter / charger, 110V AC1118 Battery, rechargeable, 8.4V
AC1031 AC adapter / charger, 220V EUR
AC1032 AC adapter / charger, 220V UK
AC1035 AC adapter / charger, 220V AUS
* E xcept legacy series MG and MGT gauges
manufactured prior to September, 2010.
www.mark-10.com 93
Accessories Power & Communication
Communication cables
Various cables are available for communicating between Mark-10 gauges, indicators, test stands, PCs, printers, PLCs,
and other devices.
Model No. Description Compatible Instruments
AC1116
USB cable, type C to A Series F test frames with EasyMESUR® to PC
(09-1349)
AC1114 Interface cable, gauge to test
Series 7, 5, 4 instruments to ESM303, ESM1500 test stands
(09-1214) stand crosshead
AC1115 Interface cable, indicator to test
Model M7I and M5I indicators to ESM303H test stand
(09-1252) stand crosshead
AC1111
USB cable, type micro B to A Series 7, 5, 4, 3, TT01, TT02, TT03, TT05, WT3-201(M) instruments to PC
(09-1165)
AC1107
USB cable, type B to A Series F test frames, ESM303, ESM750, ESM1500 test stands to PC
(09-1158)
AC1109
Serial cable, gauge to RS-232, DB-9 Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M) instruments
(09-1163)
AC1110
Cable, gauge to Mitutoyo SPC Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M) instruments
(09-1164)
AC1112 Analog cable, gauge to dual
Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M) instruments
(09-1166) banana plug
AC1105 Cable, travel display to Mitutoyo travel display mounted to ES30, TSA750(H), TSB100, TSC1000(H),
(09-1066) Mitutoyo SPC and TSF(H) test stands
Cables for legacy products are also available. See website for details.
94
Accessories Test Frame Accessories
Test Frame Accessories
Double column extension
Accommodate up to a 20 in. [508 mm] wide sample, or ø21.5 in [ø546 mm]
round sample. Three heights are available – 6, 12 and 24 in [150, 300, and 600
mm]. Base contains rows of T-slots, with available fixture mounting plates.
Compatible with:
Models F105 / F305 / F505 test frames - these test frames include a base
plate with matrix of threaded holes, which may be mounted to the column
extension’s base.
Model ESM303 test stand - if a base plate with matrix of threaded holes is
needed, add part no. AC1096.
Model No. Description
AC1095-1 Double column extension for F105, F305, F505, and ESM303, 6”
AC1095-2 Double column extension for F105, F305, F505, and ESM303, 12”
AC1095-3 Double column extension for F105, F305, F505, and ESM303, 24”
Mounting plate kit, matrix of threaded holes
AC1096
(suggested for ESM303; included with F105/F305/F505)
Shields for test frames
Provide pinch and sample debris protection for the operator. An electrical
interlock prevents test frame operation while the door is open. The test frame’s
control panel and remote emergency stop (applicable models, only) mount to
the shield’s extruded frame.
Model No. Description
AC1092-1 Shield, 51.9” height
AC1092-2 Shield, 34.4” height
AC1092-3 Shield, 51.9” height, ESM303 with column extension up to 24”
AC1092-4 Shield, 34.4” height, ESM303
www.mark-10.com 95
Accessories Test Frame Accessories
USB hub Force sensor - test stand
Test frame-mounted 4-port USB mounting kit
hub improves cable management For securing any Series R01 or R03
and conveniently accommodates force sensor to any of the following
peripherals, such as a flash drive, Mark-10 force test stands:
barcode scanner, etc.
ES10 / ES20
Compatible with Series F + ES30
IntelliMESUR® test frames. TSA750 / TSA750H
TSC1000 / TSC1000H
Model No. Description TSF / TSFH
AC1093 USB hub Model No. Description
AC1018 Mounting kit, R01/R03 to test stand
The kit contains brackets and screws with the
following thread sizes: #10-32, 1/4-28, 5/16-18, and 1/2-20.
Adapter for Series FS Force
Sensors
Adapts a Series FS force sensor or
PTAF sensor adapter to Plug & Test®
type interface, for ease of external
calibration via a Mark-10 indicator.
Also permits mounting of a Series AC1084
FS05 sensor to Models F755, F755S,
F1505, and F1505S test frames.
Model No. Description
Adapter, FS05 sensor / PTAF adapter,
to Plug & Test® connector / F755,
AC1083
F755S, F1505, F1505S test frames, 10 in
/ 250 mm cable
Extension cable, 12 in / 305 mm, Plug
AC1084 AC1083
& Test®, male/female
96
Dimensional Drawings Force Gauges
Force Gauges
Model No. Thread
Series 7 M7-012 - M7-100 #10-32M UNF
M7-200 - M7-500 5/16-18M UNC
Series 5 Model No. Thread
Models M5-012 - M5-100 #10-32 UNF
M5-012 -
M5-200 - M5- 500 5/16-18 UNC
M5-500
Series 5
Models
M5-750 -
M5-2000
www.mark-10.com 97
Dimensional Drawings Force Gauges
Model No. Thread
Series 4 M4-012 - M4-100 #10-32 UNF
M4-200 - M4- 500 5/16-18 UNC
Model No. Thread
Series 3 M3-012 - M3-100 #10-32 UNF
M3-200 - M3- 500 5/16-18 UNC
0.31 [7.9]
Ø0.40 [10.2] 0.42 [10.7] THREAD
5/16 FLAT
0.40 [10.2] ORIENTATION
0.86 [21.8] 0.28 [7.0] NOT GUARANTEED
0.55 [14.0]
Series 2 Model No. Thread
Series 2 Ø0.188 [4.8] M2-2 – M2-100 #10-32 UNF
1.40 [35.6]
M2-200 – M2-500 5/16-18 UNC
3.90 [99.1] 2.80 [71.1]
3.35 [85.0] 3.90 [99.1]
2.125 [54.0]
#6-32
X4
M4 X 0.7
X2
2.53 [64.3] 1.50 [38.1] 2.165 [55.0]
98
Dimensional Drawings
Ergonomics Force Gauges
Series E
Torque Gauges
5/16-18 UNC-2B 7.8 [199.3] WITH OPTIONAL
4.5 [114.3] X 0.380 DP. 1/4-28 UNF-2B 1/4-28 UNF-2B FLAT JAWS:
X2 X4 THRU. X20 X 0.580 DP
X4 5.9 [149.9] MAX
1.3 [33.0] MIN
4.4 [111.8] MAX
0 MIN
4.5 [114.3]
X2
0.5 [12.2]
TYP.
10.7 [270.5]
Series TT01 Ø7.5 [189.4] MAX
Ø0.5 [12.7] MIN Ø6.0 [151.9] MAX
Ø1.3 [33.0] MIN
Ø4.4 [111.8] MAX
Ø0.25 [6.35] MIN
WITH OPTIONAL
ADJUSTABLE JAWS:
Ø4.6 [116.8] MAX
Ø0 MIN
4.8 [121.8]
1.3 [33.0]
www.mark-10.com 99
Dimensional Drawings Torque Gauges
Series TT02
Series TT03
Ø0.187
X 0.350 DP.
5/16-18 UNC-2B
4.5 [114.3] X 0.380 DP.
X2 7.0 [177.8]
X4
#10-32 UNF-2B
X 0.380 DP.
X96
0.5 [12.7]
X10
4.5 [114.3]
X2
10.7 [270.5]
Series TT05 0.5 [12.7]
X10
2.8 [70.1]
100
Dimensional Drawings Plug & Test® Indicators & Sensors
Plug & Test® Indicators & Sensors
Indicators
Model M7I
Model M5I
Model M3I
www.mark-10.com 101
Dimensional Drawings Plug & Test® Indicators & Sensors
Force Sensors
Series R01
Model No. A B C D E F
MR01-50
0.46 0.90
MR01-100 1/4-28 UNF
[11.7] [22.9]
MR01-200
MR01-300 2.40 2.00 MR01-XXXXX:
MR01-500 [61.0] [50.8] 20 ft [6 m]
0.71 1.10
MR01-750 [18.0] [27.9] 1/2-20 UNF MR01-XXXX-1*
MR01-1000 10 in [254 mm]*
MR01-2000 0.96 1.40
MR01-5000 [24.4] [35.6]
3.90 3.00
3/4-16 UNF
MR01-10000 [99.1] [76.2] 1.21 [30.7] 1.63 [41.4]
* Add suffix “-1” for shortened cable, for use on ESM1500, ESM750, ESM303, and
ESM303H test stands. Ex: MR01-1000-1. Test stand mounting hardware is included.
Series R02
Model No. ØA ØB C D ØE F ØG
MR02-100 - 1.23 0.32 0.05 0.39 1.0 0.83
THRU
MR02-2000 [31.3] [8.1] [1.3] [9.9] [25.4] [21.1]
MR02-5000 - 1.48 0.43 0.07 0.62 1.25 0.25 1.08
MR02-10000 [37.6] [10.9] [1.8] [15.8] [31.8] [6.4] [27.4]
102
Dimensional Drawings Plug & Test® Indicators & Sensors
Series R03 Series R05
Model No. A
MR03-XXX 24 in [609 mm] retracted, 10 ft [3 m] stretched
MR03-XXX-1* 10 in [254 mm], straight*
* Add suffix “-1” for shortened cable, for use on ESM1500, ESM750, ESM303,
and ESM303H test stands. Ex: MR03-100-1. Test stand mounting hardware is
included.
Series R04 Series R06
www.mark-10.com 103
Dimensional Drawings Plug & Test® Indicators & Sensors
Series F Force Sensors
IN [MM]
Series FS05 Force Sensors Series FS06 Force Sensors
1.55 [39.4] 3.68 [93.3] 1.55 [39.4] 3.68 [93.3]
Ø0.52 [13.1] 2.02 [51.2]
0.78 [19.7] 1/2-20 UNF-2B
X 0.600 DP.
2.65 [67.3]
3.51 [89.2]
5.05 [128.3]
D
THREAD C
Ø0.40 [10.2]
5/16 FLAT
ORIENTATION NOT 2.02 [51.2]
GUARANTEED
A 2.00 [50.8]
THREAD B
Model No. Thread Model
Model No. A B A C BD THREAD C D
FS06-50 - FS06-200 0.46 [11.7] 0.71 [18.0] 1/4-28 UNF
FS05-012 - FS05-100 #10-32 UNF FS05-012 - 0.46 0.71 6"
1/4-28 UNF
FS06-300
FS05-100- FS06-500
[11.7] 0.90 [22.6]
[18.0] 1.106.00
[27.9] 1/2-20 UNF
FS05-200 - FS05-500 5/16-18 UNC
FS05-200 - 0.90 1.10 [152.4]
1/2-20 UNF
FS05-500 [22.6] [27.9]
Series R07 Force Sensors
F E X2
C
A
B D
Model No. A B C D E F
MR07-50
0.46 0.90 1/4-28
MR07-100
[11.7] [22.9] UNF
MR07-200
MR07-300
2.40 2.00 10.00
MR07-500 [61.0] [50.8] 0.71 1.10 [254.0]
MR07-750 [18.0] [27.9] 1/2-20
UNF
MR07-1000
0.96 1.40
MR07-1500
[24.4] [35.6]
104
Dimensional Drawings Plug & Test® Indicators & Sensors
Torque Sensors
Series R50 Series R51
Model No. A Chuck Capacity
MR50-10Z - 4.82 0.375
MR50-50Z [122.4] [9.5]
MR50-12 - 5.19 0.5
MR50-100 [131.8] [12.7]
Series R52 Series R55
Model No. Drive Size A B C D ØE F
MR55-20 - 0.30 1.73 0.32
1/4”
MR55-100 [7.5] [44.0] [8.0]
MR55-200 - 0.41 0.43 0.39 1.77 2.32
3/8”
MR55-400 [10.5] 1.73 [11.0] [10.0] [45.0] [59.0]
0.59 [44.0] 0.63
MR55-1000 1/2”
[15.0] [16.0]
0.89 2.11 0.94 0.77 2.01 2.56
MR55-5000 3/4”
[22.5] [53.5] [24.0] [19.5] [51.0] [65.0]
www.mark-10.com 105
Dimensional Drawings Wire Crimp Pull Testers
Wire Crimp Pull Testers
Model WT3-201
Model WT3-201M
106
Dimensional Drawings Manual Test Stands
Manual Test Stands
Model ES05 Model ES10
Model ES20 Model ES30
www.mark-10.com 107
Dimensional Drawings Manual Test Stands
Model TSA750 Model TSA750H
Model TSB100 Model TSC1000
108
Dimensional Drawings Manual Test Stands
Model TSC1000H Model TSF
Model TSFH
www.mark-10.com 109
Dimensional Drawings Motorized Force Testers
Motorized Force Testers
F105 / F305 / F505
5/16-18 UNC-2B
X 0.750 DEEP
X4
CONTROL PANEL
10.50 [266.7]
4.00 [101.6]
Ø0.52 [13.1]
29.84 [758.1]
5.50 [139.7] 1.67 [42.5]
2.45 - 20.45 [62.2 - 519.4]
0.50 - 18.50 [12.7 - 469.9]
BENCH MOUNTING HOLES
MAX (FS05)
BOTTOM VIEW
MAX (FS06)
5/16-18 UNC-2B
4.75 [120.7]
X 0.460 DEEP
3.50 [88.9]
#10-32 UNF-2B
0.50 [12.7]
X 0.460 DEEP
TYP
0.46 [11.7] X24
1.15 [29.2]
2.80 [71.1] 3.43 [87.0]
5/16-18 UNC-2B
4.00 [101.6] X 0.700 DEEP 6.97 [176.9]
X6 2.75 [69.9]
7.60 [193.0] 7.47 [189.6] 0.50 [12.7]
1.50 [38.1]
TYP
A 14.95 [379.7]
Control Panel A MOUNTING PLATE
TOP VIEW
12.57
EasyMESUR®
[319.2]
CONTROL PANEL A
EasyMESUR 17.30 12.57 [319.2] MAX
IntelliMESUR®
[439.3]
IntelliMESUR 17.50 [444.4] MAX
F505H
14.40 [365.8]
4.75 [120.7] 5/16-18 UNC-2B
X 0.460 DEEP
3.50 [88.9]
4.00 [101.6] #10-32 UNF-2B
0.50 [12.7]
X 0.460 DEEP
TYP
14.40 [365.8]
X24
Ø0.52 [13.1]
0.50 - 18.50 [12.7 - 469.9] 4.75 [120.7] 5/16-18 UNC-2B
MAX (FS06) X 0.460 DEEP
.20 [30.5] 3.50 [88.9]
2.45 - 20.45 [62.2 - 519.4] 2.75 [69.9]
0.46 [11.7] 4.00 [101.6] #10-32 UNF-2B
MAX (FS05) 0.500.50
[12.7]
[12.7]
1.50 [38.1] X 0.460 DEEP
TYPTYP
X24
Ø0.52 [13.1]
0.50 - 18.50 [12.7 - 469.9] MOUNTING PLATE
MAX (FS06)
1.20 [30.5] TOP VIEW
2.75 [69.9]
A
2.45 - 20.45 [62.2 - 519.4]
0.46 [11.7]
MAX (FS05) 0.50 [12.7]
1.50 [38.1]
TYP
7.67 [194.8]
MOUNTING PLATE
4.90 [124.5]
TOP VIEW
A
Control Panel A
7.67 [194.8]
31.09 [789.8] 17.10
4.90 [124.5]
EasyMESUR®
[434.2]
C-2B
EEP
16.23
IntelliMESUR®
[412.2]
31.09 [789.8]
10.20 [259.1]
5/16-18 UNC-2B
X 0.750 DEEP
X4 CONTROL PANEL A
110 EasyMESUR 17.10 [434.2] MAX
Dimensional Drawings Motorized Force Testers
F755 / F755S / F1505 / F1505S
6.00
CONTROL PANEL
Ø0.76 [19.4]
8.00
A 1.50 [38.1]
BENCH MOU
6.70 [170.2] BOTTO
3/8-16 UNC-2B
6.00 [152.4] X 1.500 DEEP
X4
3.50 [88.9]
13.00 [330.2]
5/16-18 UNC-2B 4.88 [123.8]
X 1.00 DEEP
X6
0.50 [12.7]
0.60 [15.2]
4.20 [106.7] 4.35 [110.5] MOUNTI
19.4] TOP
10.98 [279.0] 8.70 [221.0]
C 8.00 [203.2] 4.0020.00 [508.0]
[101.6] 3/8-16 UNC-2B
6.00 [152.4] X 1.500 DEEP
X4
3/8-16 UNC-2B
6.00 [152.4] X 1.500 DEEP
X4
BENCH MOUNTING HOLES
6.70 [170.2]Model A B BOTTOM VIEW STAND A B MIN. - MAX.
51.35 8.13 - 40.13 EM: 15
51.35 8.125 - 40.125 F1500
F1505 [1304.3] [206.4 - 1019.2] IM: 19.
13.00 [330.2]
[1304.3] [206.4 - 1019.2] 51.35 8.13 - 40.13 EM: 15
F750
#10-32 UNF-2B
[1304.3] [206.4 - 1019.2] IM: 19.
51.35 8.125 - 40.125
13.00 [330.2]
F755 X 0.600 DEEP33.89 8.13 - 40.13 EM: 15
F1500S
B [1304.3] [206.4 - 1019.2] [860.9] [206.4 - 1019.2] IM: 19.
1/2-20 UNC-2B33.39 8.13 - 40.13 EM: 15
33.89 8.125 - 22.33 F750S
X 0.600 DEEP[848.1]
3.50 [88.9] [206.4 - 1019.2] IM: 19.
CONTROL PANEL
F1505S
[860.9] [206.4 - 567.1]
CONTROL PANEL 33.89 8.125 - 22.33
5/16-18 UNC-2B
F755S
[860.9] [206.4 - 567.1]
Ø0.76 [19.4] 4.88 [123.8] 3.50 [88.9]
X 1.00 DEEP
X6
Ø0.76 [19.4] 8.00 [203.2] 4.00 [101.6]
Control Panel C
0.50 [12.7] 0.50 [12.7]
15.22 4.88 [123.8] 8.00 [203.2] 4.00 [101.6]
EasyMESUR®
1.50 [38.1]
[386.5]
4.35 [110.5] 19.95 MOUNTING PLATE BENCH MOUNTING HOLES
IntelliMESUR®1.50 [38.1] 6.70 [170.2] TOP VIEW BOTTOM VIEW
8.70 [221.0] [506.7]
BENCH MOUNTING HOLES
20.00 [508.0] 6.70 [170.2] BOTTOM VIEW
#10-32 UNF-2B
X 0.600 DEEP
B
#10-32UNC-2B
1/2-20 UNF-2B
XX 0.600
0.600 DEEP
DEEP
BB MIN. - MAX. 3.50 [88.9]
STAND A
51.35 8.13 - 40.13
C
EM: 15.22 [386.5]
www.mark-10.com
1/2-20 UNC-2B 111
F1500 X 0.600 DEEP
[1304.3] [206.4 - 1019.2] IM: 19.95 [506.7] 3.50 [88.9]
Dimensional Drawings Torque Testers
Torque Testers
Model TST Model TSTH
Model TSTM-DC Model TSTMH-DC
112
Notes
www.mark-10.com 113
Applications are virtually limitless...
Mark-10 force and torque measurement products help quality control, engineering, and manufacturing professionals
assess and ensure quality in virtually every industry worldwide.
Consumer Medical Food & Other
Automotive Aerospace Electronics Springs Packaging Ergonomics
Products Device Beverage Industries
Force & Torque Measurement Engineered Better
Mark-10 Corporation
Please
11 Dixon Avenue n Copiague, NY 11726 USA Recycle
888-MARK-TEN n Tel: +1 631 842 9200 n Fax: +1 631 842 9201
© 2023 MARK-10 CORPORATION
www.mark-10.com n [email protected] 32-1000
You might also like
- Testbank For Financial Markets and Institutions 8th Edition SaundersNo ratings yetTestbank For Financial Markets and Institutions 8th Edition Saunders18 pages
- Optional Rotary Drilling Rig & Construction MethodNo ratings yetOptional Rotary Drilling Rig & Construction Method49 pages
- Motorized Test Stand MX2 Series MX2-500N/1000N/2500N/5000NNo ratings yetMotorized Test Stand MX2 Series MX2-500N/1000N/2500N/5000N8 pages
- CMT-300 Computer Control Electronic Universal Testing MachineNo ratings yetCMT-300 Computer Control Electronic Universal Testing Machine10 pages
- Summer Internship Presentation 2024 By-Nikhil Priyadarshi 211640No ratings yetSummer Internship Presentation 2024 By-Nikhil Priyadarshi 21164047 pages
- IMADA Catalog Contact Force MeasurementNo ratings yetIMADA Catalog Contact Force Measurement16 pages
- Electroforce Load Frame and Testbench InstrumentsNo ratings yetElectroforce Load Frame and Testbench Instruments19 pages
- TORNADO 431-038-08 - Digital - Torque - Testers - Brochure456No ratings yetTORNADO 431-038-08 - Digital - Torque - Testers - Brochure45612 pages
- WAW-600F Single Space Servo Universal Testing MachineNo ratings yetWAW-600F Single Space Servo Universal Testing Machine13 pages
- Acceleration Measurements: Operation and Maintenance Manual100% (1)Acceleration Measurements: Operation and Maintenance Manual64 pages
- Catalogue Chatillon Force Measurement Instruments PDFNo ratings yetCatalogue Chatillon Force Measurement Instruments PDF44 pages
- WAW-1000EG Computer Control Electro-Hydraulic Servo Universal Testing Machine With PC WiresNo ratings yetWAW-1000EG Computer Control Electro-Hydraulic Servo Universal Testing Machine With PC Wires13 pages
- Megger Electrical Test Instruments CatalogNo ratings yetMegger Electrical Test Instruments Catalog32 pages
- Low Profile General Purpose Calibration Load CellsNo ratings yetLow Profile General Purpose Calibration Load Cells3 pages
- Force Gauge Comparison Chart: Mark-10 Corporation Toll-Free: 888-MARK-TEN Tel: 631-842-9200 Fax: 631-842-9201No ratings yetForce Gauge Comparison Chart: Mark-10 Corporation Toll-Free: 888-MARK-TEN Tel: 631-842-9200 Fax: 631-842-92011 page
- Sensors For Handling and Processing TechnologyNo ratings yetSensors For Handling and Processing Technology180 pages
- Store at Pakuwon Health, Beauty and Personal CareNo ratings yetStore at Pakuwon Health, Beauty and Personal Care8 pages
- Red Micro Stereo Business PPT TemplatesNo ratings yetRed Micro Stereo Business PPT Templates27 pages
- Public Notice / Caution Against Fraudulent Communication by Unscrupulous Elements Regarding "Recruitment Offers" in RINLNo ratings yetPublic Notice / Caution Against Fraudulent Communication by Unscrupulous Elements Regarding "Recruitment Offers" in RINL1 page
- Hello World Arctic Animals Jill Mcdonald PDF Download100% (3)Hello World Arctic Animals Jill Mcdonald PDF Download44 pages
- Assignment No 4-Construction Finance Management and Cost Accounting100% (2)Assignment No 4-Construction Finance Management and Cost Accounting22 pages
- Q.1: Explain The Difference Between Connectionless Unacknowledged Service andNo ratings yetQ.1: Explain The Difference Between Connectionless Unacknowledged Service and17 pages
- Far 6813 - Inventory Cost Flow Lower of Cost or Net Realizable Value (LCNRV)No ratings yetFar 6813 - Inventory Cost Flow Lower of Cost or Net Realizable Value (LCNRV)2 pages
