Reference Standards
Reference Standards
REFERENCED STANDARDS
This chapter lists the standards that are referenced in various sections of this document. The standards are listed herein by the
promulgating agency of the standard, the standard identification, the effective date and title, and the section or sections of this
document that reference the standard. The application of the referenced standards shall be as specified in Section 102.8.
ASME—continued
B16.9—1993 Factory Made Wrought Steel Buttwelding Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
B16.11—1996 Forged Fittings, Socket-Welding and Threaded. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
B16.15—1985(R1994) Cast Bronze Threaded Fittings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
B16.18—1984(R1994) Cast Copper Alloy Solder Joint Pressure Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513.13.1, Table 1202.5
B16.22—1995 Wrought Copper and Copper Alloy Solder Joint Pressure
Fittings—with B16.22a-1998 Addenda . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 513.13.1, Tabl e 1202.5
B16.23—1992 Cast Copper Alloy Solder Joint Drainage Fittings DWV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
B16.24—1991 (R1998) Cast Copper Alloy Pipe Flanges and Flanged Fittings: Class 150, 300, 400, 600, 900, 1500 and 2500. . . . . . . . . . Table 1202.5
B16.26—1988 Cast Copper Alloy Fittings for Flared Copper Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
B16.28—1994 Wrought Steel Buttwelding Short Radius Elbows and Returns. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
B16.29—1994 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings-DWV . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
BPVC—1998 Boiler & Pressure Vessel Code (Sections I, II, IV, V & VI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1004.1, 1011.1
CSD-1—1998 Controls and Safety Devices for Automatically Fired Boilers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1004.1
ASTM International
ASTM—continued
D 2467—01 Specification for Poly (Vinyl Chloride)(PVC) Plastic Pipe Fittings, Schedule 80 . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
D 2468—96a Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe Fittings, Schedule 40 . . . . . . . . . . . . . . . . . Table 1202.5
D 2513—00 Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings. . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4, 1203.15.3
D 2564—96a Specification for Solvent Cements for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems . . . . . . . . . . . . . . . . . . . . . 1203.3.4
D 2683—98 Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled
Polyethylene Pipe and Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4, 1203.15.1
D 2837—98a Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials . . . . . . . . . . . . . . . . . . . . . Table 1202.4
D 2846/D 2846M—99 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Hot and Cold Water
Distribution Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4, 1203.3.4
D 2996—00 Specification for Filament-Wound Fiberglass (Glass Fiber Reinforced Thermosetting Resin) Pipe . . . . . . . . . . . . Table 1302.3
D 3035—01 Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter . . . . . . . . . . . . Table 1202.4
D 3278—96el Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
D 3309—96a Specification for Polybutylene (PB) Plastic Hot- and Cold- Water Distribution Systems. . . . . . . . . . . . Table 1202.4, 1203.10.1
D 3350—01 Specification for Polyethylene Plastics Pipe and Fittings Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4
E 84—01 Test Method for Surface Burning Characteristics of Building Materials . . . . . . . . . . . . . . . . . . . 202, 510.8, 602.2.1, 602.2.1.5,
604.3, 1204.1
E 119—00e Test Method for Fire Tests of Building Construction and Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 607.5.2, 607.6.2
E 136—99e01 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202
E 814—00 Test Method for Fire Tests of Through-Penetration Fire Stops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 506.3.10
F 438—01 Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe
Fittings, Schedule 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
F 439—01 Specification for Socket Type Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe
Fittings, Schedule 80 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.5
F 441/F 441M—99 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe,
Schedules 40 and 80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4
F 442/F 442M—99 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe (SDR-PR) . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4
F 493—97 Specification for Solvent Cements for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic
Pipe and Fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1203.3.4
F 876—01 Specification for Crosslinked Polyethylene (PEX) Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4
F 877—01 Specification for Crosslinked Polyethylene (PEX) Plastic Hot and Cold-Water
Distribution Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4, Table 1202.5
F 1055—98 Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter
Controlled Polyethylene Pipe and Tubing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4, 1203.15.2
F 1281—01 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene
(PEX-AL-PEX) Pressure Pipe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Table 1202.4
F 1974—00e Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene
and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe. . . . . . . . . . . . . . Table 1202.5
Department of Labor
Occupational Safety and Health Administration
c/o Superintendent of Documents
Federal Specifications*
General Services Administration
7th & D Streets
* Standards are available from the Supt. of Documents, U.S. Government Printing Office, Washington, DC 20402-9325.