0% found this document useful (0 votes)
4 views6 pages

S3_ELECTRONIC_DEVICES_AND_CIRCUITS_PRACTICAL

Download as pdf or txt
Download as pdf or txt
Download as pdf or txt
You are on page 1/ 6

1040233320 L T P C

Electronic Devices and Circuits


Practical 0 0 4 2

Inroduction

Every Electronics Engineer should have knowledge about the components


used in Electronics. By doing practical experiments in this course,they will be
skilled in handling electronic circuits and able to apply the skill in electronic
systems.

Course Objectives

The objective of this course is to

 Familiarize with basic electronic devices PN Junction diode, Zener diode,


BJT, UJT and FET.

 Understand the working of SCR.

 Know the working of Clippers and Clampers.

 Acquire knowledge on RC coupled amplifier, RC phase shift oscillator.

 Understand the working of Astable Multivibrator

Course Outcomes

After successful completion of this course, the students should be able to

CO1: Test the working of PN Junction diode, Zener diode, BJT, UJT, FET and
SCR.

CO2: Test the working of Clippers and Clampers.

CO3: Check the performance of RC coupled amplifier, RC phase shift


oscillator.

CO4: Test the working of Astable Multivibrator

Pre-requisites

Knowledge on Electronic devices and circuits

DIRECTORATE OF TECHNICAL EDUCATION, CHENNAI – 600 025


2023 REGULATION 1
1040233320 L T P C
Electronic Devices and Circuits
Practical 0 0 4 2

CO/PO Mapping

CO / PO PO1 PO2 PO3 PO4 PO5 PO6 PO7

CO1 3 1 1 3 1 1 1

CO2 3 1 1 3 1 1 1

CO3 3 1 1 3 1 1 1

CO4 3 1 1 3 1 1 1
Legend: 3-High Correlation, 2-Medium Correlation, 1-Low Correlation

Instructional Strategy

 Practice approach may be followed throughout the course so that


students are able to understand and grasp the concepts and principles.

DIRECTORATE OF TECHNICAL EDUCATION, CHENNAI – 600 025


2023 REGULATION 2
1040233320 L T P C
Electronic Devices and Circuits
Practical 0 0 4 2

Assessment Methodology

Continuous Assessment (40 marks) End


Semester
CA1 CA2 Examination
(60 marks
Practical Test Practical Test Practical
Mode Observation
(Cycle I) (Cycle II) Exam
Duration 2 hours 2 hours - 3 hours
Exam
60 60 - 100
Marks
Converted 15 15 10 60
to
Final 40 60
Marks

DIRECTORATE OF TECHNICAL EDUCATION, CHENNAI – 600 025


2023 REGULATION 3
1040233320
Electronic Devices and L T P C

Practical Circuits 0 0 4 2

Ex.No Name of the Experiment


Construct a circuit and test the forward and reverse bias
1 characteristics of a PN Junction diode. Find the value of its cut-
in voltage.
Construct a circuit and test the forward and reverse bias
2 characteristics of a Zener diode.Find the value of its reverse
breakdown voltage.
Construct a Half wave rectifier and test its input and output 20
3
waveforms.
Construct a full wave (bridge) rectifier and test its input and
4
output waveforms.
Construct a Common Emitter Transistor circuit and test its input
5 and output characteristic curves.

Construct a Common Source Field Effect Transistor circuit and


6
test its characteristic curves.
7 Construct a circuit and test the characteristics of SCR.
Construct a circuit and test the negative resistance
8
Characteristics of UJT.
Construct and test the working of positive clipper and negative
9 clipper.

Construct and test the working of positive clamper and


10
negative clamper.
20
Test the frequency response of RC coupled amplifier.
11

12 Test the working of Schmitt trigger circuit.


Test the working of Astable Multivibrator using open source
13
software tool.
Test the working of Hartley oscillator using open source
14
software tool.
Test the working of RC phase shift oscillator using open source
15 software tool.

TOTAL HOURS 60

DIRECTORATE OF TECHNICAL EDUCATION, CHENNAI – 600 025


2023 REGULATION 4
1040233320 L T P C
Electronic Devices and Circuits
Practical 0 0 4 2

Suggested Activity

Apart from laboratory learning, Teachers should use the following strategies
to achieve the various outcomes of the course.

• Different methods of teaching and media to be used to attain attention.

• Micro-projects may be given to group of students for hand-on


experiences.

Reference Books:

1. Electronic Devices & Circuits by S.Salivahanan , N.Suresh Kumar,


A.Vallavaraj
Tata McGraw Publication 3rdEdition 2016.

2. Electronics Devices and circuit theory by Boyestad &Nashelsky, Prentice


Hall 2009.

3. Electronic Principles by Malvino,-Tata McGraw Hill Publication 2010.

LIST OF EQUIPMENTS:

S.NO Name of the Equipments Range Required Nos

1 DC Regulated power supply 0-30V,1A 10

2 High Voltage Power Supply 0-250V,1A 2

3 Signal Generator 1MHz 4

4 Dual trace CRO 20MHz/ 30MHz 5

5 Digital Multimeter 10

6 DC Voltmeter (Analog/Digital) 10

7 DC Ammeter (Analog/Digital) 15

8 Open source software : Multisim

DIRECTORATE OF TECHNICAL EDUCATION, CHENNAI – 600 025


2023 REGULATION 5
1040233320
Electronic Devices and L T P C

Practical Circuits 0 0 4 2

Allocation of Marks for End Semester Practical and Model Practical


Examination

Part Description Marks


A Aim 5
B Apparatus Required 5
C Circuit Diagram& Tabular Column 40
Connection / Procedure , Observation/Reading
D 35
Taken &Calculations
E Result / Output 10
F Viva voce 5
TOTAL MARKS 100

Note:

 Practical observation note book is sufficient and no need of


separate practical record note book. Submission of Practical
observation note book to model practical exam and end
semester practical exam is mandatory.

Allocation of Marks for CA1 & CA2 Practical Tests


Part Description Marks
A Aim 5
B Circuit Diagram & Tabular Column 25
Connection / Procedure , Observation/Reading
C 20
Taken &Calculations
D Result/Output 10
TOTAL MARKS 60

DIRECTORATE OF TECHNICAL EDUCATION, CHENNAI – 600 025


2023 REGULATION 6

You might also like