Scribd
Upload
60 views2 pages

190 Update Engine Electronics

Uploaded by

Ed Morales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
60 views2 pages

190 Update Engine Electronics

Uploaded by

Ed Morales
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Campaign No.

2019020002, February 2019

TO: ALL MERCEDES-BENZ CENTERS

SUBJECT: Model C-Class (205 platform) and AMG GT-Class (190 platform)
Model Year 2016-2018

Update engine electronics (ME-SFI) control unit software

Daimler AG (“DAG”), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model
Year (“MY”) 2016-2018 C-Class (205 platform) and AMG-GT-Class (190 platform) vehicles, an incorrect
software could cause certain vehicles to exceed certain emissions requirements. An authorized
Mercedes-Benz dealer will update the engine control unit software on the affected vehicles.

Prior to performing this Service Campaign:


• Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously
repaired.
• Please review the entire Service Campaign bulletin and follow the repair procedure exactly as
described.

Approximately 2793 vehicles are affected.

Order No. P-SC-2019020002


This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data
Control, and MBUSA-SLP S424HH001, Control of Quality Records.
2

Note:
• Use Xentry 12/18 with all associated patches or higher.
• Follow the steps exactly as described in Xentry.
• Connect battery charger (battery voltage >12.5V).
• Ensure all electrical consumers are switched-off.
• In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the
“pre-call” check list before contacting UHD
• Refer to Star Diagnosis System (SDS) Best Practices Guide.

Work procedure

1. Connect XENTRY Diagnosis.

2. Update engine electronics (ME-SFI) control unit software.

To do so, select menu item "Quick test view N3/10 engine electronics (ME-SFI) Adaptations
Control unit update Update of control unit software".

Then follow the user guidance in XENTRY Diagnosis.

Warranty Information
Operation: Connect/disconnect battery charger (02-5058)
Star Diagnosis System (SDS), Connect/disconnect (02-4762)
Update engine electronics (ME-SFI) control unit software (02-9334)

Damage Code Operation Number Labor Time (hrs.)


54 961 13 8 02-5058 0.1
02-4762 0.1
02-9334 0.1

Note
Operation Number labor times are subject to change

P-SC-2019020002

You might also like