HI 902C

Automatic Titration
System
Features
Four working modes; potentiometric titrator, pH meter, mV ·· 3-way motor driven valve
meter, and ISE meter: ·· PTFE burette tubing with polyurethane tube jacketing
• Potentiometric titrator • Full featured research grade pH meter
·· Linked titration methods allow two methods to run in sequence ·· Automatic Temperature Compensation
·· Supports up to 100 titration methods (standard and user defined) ·· Up to five calibration points with auto recognition of standard
·· Acid/base, non-aqueous, ORP, complexation, back, precipitation buffers
titrations and titre determination can be performed ·· Up to five custom buffers can be used for calibration
·· Pre-programmed methods or create your own • mV (ORP) meter
·· Titration graph can be displayed on-screen and saved as a bitmap ·· Relative mV calibration
·· Choice of endpoint detection: equivalence point (1st or 2nd • ISE meter
derivative) or fixed pH/mV value
·· Numerous concentration unitsincluding: mol/L, mmol/L, mg/L, mg/
·· Reminders for titrant age and standardization expiration mL, ug/L, %, ppt, ppm, g/L, and user defined
·· Multiple end-point titrations with multiple molecular weights and ·· Up to five calibration points with five custom standards
reaction ratios
• Intuitive user interface
·· Two sensor inputs with the addition of a second analog board
• USB port allows for the transfer of methods and reports to a PC or
·· Supports two burette dosing pumps with the ability to perform back
another titrator via USB flash drive
titrations
• User upgradable software
·· Clip-Lock exchangeable burette system enables users to exchange
burettes in a matter of seconds • Available with 1 or 2 probe inputs
·· 25 mL precision ground glass syringe with PTFE plunger • RS232 port allows direct connection to an analytical laboratory
·· 40,000 step screw drive, piston dosing pump that can deliver as balance
little as 0.125 µL a dose • Multi language support

HI 902C
The HI 902C is an automatic titrator that complements our wide range of reagents. Burettes simply slide out for quick exchange of titrant and
products dedicated to quick and accurate laboratory analysis. burette for a separate titration method. No need to purge and then rinse
with a new titrant.
The HI 902C can perform acid/base, potentiometric, ORP, complexometric,
precipitation, back titrations and titre determinations. Interrupting an important cycle of analysis due to a malfunctioning
burette is a thing of the past. With the Hanna Clip-Lock™ system you
It dispenses titrant, detects the endpoint and performs all necessary
can simply substitute the burette and complete all your tests with the
calculations automatically.
same titrant!
This versatile titrator supports up to 100 methods, standard or user
Having several prepared burettes on hand will make the Hanna HI 902C
defined. When powered on, the instrument initiates an internal diagnostics
one of the fastest and most versatile titration systems on the market.
check and then readies itself for the first titration of the day. A large color
LCD screen clearly shows the chosen method and related information. A
real-time titration curve can be shown on the display; this feature is useful
when new methods are tested or when a procedure needs to be optimized.
At the end of the titration, all data, including the graph, are automatically
stored in memory and can be copied via the built-in USB drive or through
direct connection with a PC.

This titrator is supplied with pre-programmed methods or you can

create your own. Methods (standard and user) can be upgraded, stored
or deleted by connecting the titrator to a PC with Hanna software or
a USB flash drive. Software updates can also be performed using a USB
flash drive.

Users can connect pH, ORP or ISE electrodes to the HI 902C, as well as
create a complete workstation with a PC, monitor, keyboard and printer.

The HI 902C complies with GLP specifications. All GLP information from
each sample can be stored, including ID number, date and time of analysis,
electrode ID code, and last calibration date.

The HI 902C also features Hann’s exclusive Clip-Lock™ burette system.

With Clip-Lock™, reagents burettes can be exchanged quickly and easily
to perform different titrations. The Clip-Lock™ exchangeable burette
system prevents cross contamination while reducing loss of time and
Versatile Data Management
• HI 902C Series titration systems can be easily incorporated into any existing GLP • The USB port allows for the easy transfer of methods, reports and software
data management program upgrades via USB flash drive

• Easily record all necessary GLP information with every sample such as sample • Users can print reports of analyses directly from the titrator using a standard
identification, company and operator name, date, time, electrode ID codes and parallel printer
calibration information
• An external monitor and keyboard can be attached for added versatility
• Data can be transferred to a PC using the Hanna HI 900PC application

Customizable reports Versatile results Titration graphs

Titration reports are fully customizable Titration or pH/mV/ISE reports can be Titration graphs can be viewed on screen
viewed on-screen or transferred to a or saved as bitmaps and transferred to a
USB storage device PC via USB

HI 902C Specifications
pH ISE
Range -2.000 to 20.000 pH Range 1 x 10-6 to 9.99 x 1010
Resolution 0.1 / 0.01 / 0.001 pH Resolution 1, 0.1, 0.01
Accuracy (@ 25°C) ±0.001 pH Accuracy (@ 25°C) ±0.5% monovalent; ±1% divalent
up to five point calibration, seven user standard up to five point calibration, seven standard solutions
Calibration Calibration
solutions and five user defined standards and five user defined standards
Calibration Units ppm or M standards
ORP
Range -2000.0 to 2000.0 mV Temperature

Resolution 0.1 mV Range -5.0 to 105.0°C / 23 to 221 °F / 268.2 to 378.2 K

Accuracy (@ 25°C) ±0.1 mV Resolution 0.1 °C / 0.1 °F / 0.1 K

Accuracy (@ 25°C) ±0.1 °C / ±0.2 °F / ±0.1 K (excluding probe error)
Calibration single point offset

Additional Specifications
Burette Sizes 5, 10 and 25 mL
Burette Resolution 1/40000
Display Resolution 0.001 mL
Dosing Accuracy ±0.1% of full burette volume
Dosing Range 0.010 mL to 0.500 mL
Display 5.7” (320 x 240 pixel) backlit color LCD
Languages English, Portuguese, Spanish
Methods load up to 100 methods (standard and user-defined)
Burette Auto-Detection burette size is automatically recognized when inserted into the unit
Programmable Stirrer propeller type, 100-2500 rpm, automatically held within 10% of the set value, resolution 100 rpm
Flow Rate user-selectable from 0.1 mL/min to 2x burette volumes/min
Temp. Compensation manual or automatic (ATC)
End-point Determination equivalence point (1st or 2nd derivative) or fixed pH/mV value
acid-base (pH or mV-mode), redox, precipitation, complexometric, non-aqueous,
Potentiometric Titrations
ion-selective, argentometric, back titrations and titre determination
Measurement Units user specified expression of concentration units to suit specific calculation requirements
mV-volume or pH-volume titration curve, 1st derivative curve or 2nd derivative curve, in pH-mode, mV mode or ISE mode;
Real Time & Stored Graphs
pH/mV/concentration values versus time-datalogging results
Data Storage up to 100 titration and pH/mV/ISE reports
USB Host (Side) flash drive compatibility for transfers of methods and reports
Peripherals (Rear) connections for VGA display, PC keyboard, parallel printer, USB device input, RS232, interface for future expansion
GLP Conformity instrumentation data storage and printing capabilities
Operating Environment 10 to 40 °C (50 to 104 °F), up to 95% RH
Storage Environment -20 to 70 °C (-4 to 158 °F), up to 95% RH
Power “-01” models: 115 VAC; “-02” models: 230 VAC; 50/60 Hz
Dimensions 390 x 350 x 380 mm (15.3 x 13.8 x 14.9 in)
Weight approximately 10 kg (22 lbs.) with one pump and stirrer assembly

Ordering Information

HI 902C1-01 (115V) titrator with one analog board; HI 902C1-02 (230V) titrator with one analog board; HI 902C2-01 (115V) titrator with two analog boards;
HI 902C2-02 (230V) titrator with two analog boards. All models include stirrer with stand, 25 mL glass burette, dosing pump drive, temperature sensor, USB cable, 256 Mb USB flash drive and PC
software.
 We Design, Manufacture, Supply
and Support All of Our Products.
When you buy a Hanna product, you’re not only buying the best value for your
money, but you’re also receiving the benefit of Hanna’s unsurpassed customer
service and post-sale technical support.

With 60 offices in over 40 countries, Hanna dedicates itself to be a worldwide

leader in service and selection.

Offering research grade quality at competitive prices, every Hanna office strives
to work with each customer to develop a solution tailored to their needs, on their
budget.
P/L HI902C 4/13 PRINTED IN THE USA

Hanna Instruments Inc.

584 Park East Drive,
Woonsocket, RI 02895
401-765-0045
www.hannainst.com