Nets
Nets
Nets
Task: Create a Cube from a Net
Instructions:
1. Research & Plan (MYP Criterion A - Knowing and Understanding): Review the
properties of a cube and different possible nets. Choose one net that can form a cube.
2. Design & Draw (MYP Criterion B—Investigating Patterns): Draw your chosen net on a
paper sheet, ensuring measurement accuracy. You may use any paper dimensions, but
all squares should be equal.
3. Create & Construct (MYP Criterion C - Communicating): Cut out the net and fold it to
create a 3D cube.
- Take pictures of each step: drawing, cutting, folding, and final cube.
- Arrange these images in a Word document, adding brief captions to explain each step.
MY RESEARCH
NETS OF A CUBE
https://www.cuemath.com/ncert-solutions/identify-the-nets-which-can-be-used-to-ma
ke-cubes-cut-out-copies-of-the-nets-and-try-it/
A cube is a 3-D solid object with six square faces and all the sides of a cube are of the
same length.
The net of a cube is formed when the 3D figure with the square faces is flattened by
separating at the edges making it into a 2D figure. Through the net of the cube, we can
see the six faces.
Nets for a Cube - YouTube Video
https://www.youtube.com/watch?app=desktop&v=HEYcyuuPhAg
https://www.cuemath.com/measurement/cube/
A cube is considered a special kind of square prism since all the faces are in the shape of
a square and are platonic solid. There are many different properties of a cube just like
any other 3D or 2D shape. The properties are:
Nets of a cube
https://mathematicscentre.com/taskcentre/ansprim.htm
DESIGN AND DRAW
Chosen Net
THE PROCESS
1st step
Drawing the pattern: I had chosen an eye type of pattern/design to be made on the back
as I thought it would look interesting and unique. Drawing eyes is also something i draw
a lot and very often.
Final pattern
2nd step
Drawing the net: In this step, I drew a net using my ruler and pencil. Each face of the
final cube was 5cm by 5 cm.
3rd step
Cutting the net out: In this step I used scissors to cut out the outline of the net to create
the cube.
4th step
Folding the edges: To make it simpler to construct the cube, I have folded all of the net's
edges.
5th Step
Taping the net to form a cube: In this step, I started to create the cube using
double-sided tape as I could not find clear tape.
7th step
Stapling the edges together: Still after taping all the sides together, the cube wasn’t fully
complete. I stapled the edges that were not sealed to make sure the cube was a closed 3D
shape.