STEEL BEAM-COLUMN DESIGN AISC 360-16 ASD/LRFD

PROJECT : DATE : 12/1/2025

LOCATION : ENGINEER :
PROJECT NO. : CHECK :

Section property
STEEL GRADE STK 400 Section form List TUBE 200x100x6
Steel yield stress Fy 235.00 MPa.
Steel tensile stress Fu 400.00 MPa. bf 100.00 mm. rx 71.20 mm.
Modulus of elasticity E 200000 MPa. d 200.00 mm. ry 41.40 mm.
t 6.00 mm. Ix 17000000.00 mm4
Unbraced length about x axis Lx 2 m W 26.40 kg./m. Iy 5770000.00 mm4
Unbraced length about y axis Ly,Lby 2 m Ag 3363.00 mm2 Sx 170000.00 mm3
Effective length factor about x axis Kx 1 J 13856320.67 mm4 Sy 115000.00 mm3
Effective length factor about y axis Ky 1 C 217997.63 mm3 Zx 190400.00 mm3
Lr 127830.03 mm. Zy 128800.00 mm3

Design of members for Tensile strength (Section D2)

Tensile strength Section D2
Nominal tensile strength Pn = Min( Fy*Ag , Fu*Ae ) Pn 790.31 kN
Design tensile strength ASD Pa = Pn / Ωt Ωt= 1.67 Pa 473.24 kN
Design tensile strength LRFD Pu = Φt Pn Φt= 0.9 Pu 711.27 kN

Classification of sections for local buckling for Compression Elements

Width-to-Thickness Ratio λ = D/t λ 16.67
Limiting Width-to-Thickness Ratio λr = E/Fy λr 93.62 Nonslender

Design of members for Compression (Section E)

Φc 0.9 LRFD Ωc 1.67 ASD
effective length of member for buckling about x-axis Lcx = Kx Lx Lcx 2.00 m.
effective length of member for buckling about y-axis Lcy = Ky Ly Lcy 2.00 m.
Lcx/rx 28.09
Lcy/ry 28.09
Section E3 Flexual Buckling Consider about X axial
Flexural elastic buckling stress Fex = π^2 E / (Lcx/rx)^2 Fex 2501.67 MPa.
Check elastic buckling Lcx / rx > 4.71(E/Fy)^0.5 28.09 ≤ 137.40
Check elastic buckling Fy/Fex >2.25 0.09 ≤ 2.25 inelastic
Critical stress Fcr = (0.658)^(Fy/Fe) Fy 225.94 MPa.
Section E7 Not consider
Effective Areas of The Cross Section λ<=λr ; Ae=Ag , λ>λr ; Ae=[(0.038E/Fy(D/t))+(2/3)]Ag Not consider mm2
Nominal compressive strength Pn = Fcr Ag 759.84 kN.
Design compressive strength ASD Pa = Pn / Ωc Pa 454.99 kN.
Design compressive strength LRFD Pu = Φc Pn Pu 683.85 kN.

Classification of sections for local buckling

Classification of flanges in flexure
Width to thickness ratio (bf-3t) / t λf 13.67
Limiting ratio for compact section 1.12 (E/Fy)^0.5 λpf 32.67 λpf > λf
Limiting ratio for non-compact section 1.40 (E/Fy)^0.5 λrf 40.84 Compact
Classification of web in flexure
Width to thickness ratio (h-3t) / t λw 30.33
Limiting ratio for compact section 2.42 (E/Fy)^0.5 λpw 70.599 λpw > λw
Limiting ratio for non-compact section 5.70 (E/Fy)^0.5 λrw 166.29 Compact
 STEEL BEAM-COLUMN DESIGN AISC 360-16 ASD/LRFD
PROJECT : DATE : 12/1/2025
LOCATION : ENGINEER :
PROJECT NO. : CHECK :

Design of members for flexure about main axis (Section F7)

Φb 0.9 LRFD Ωb 1.67 ASD

Yielding Section F7.1

Nominal flexural strength for yielding Mn = Mp = Fy Zx Mn 44.74 kN-m.
Flange Local Buckling Not consider
Nominal flexural Not consider Not consider Mn Not consider kN-m.
Effective width of the compression flange Not consider be Not consider mm.
Web Local Buckling Not consider
Nominal flexural Not consider Not consider Mn Not consider kN-m.

Lateral-Torsional Buckling Section F7.4

The limiting laterally unbraced length for the limit state of yielding Lp = 0.13Ery [(JAg)^0.5 / Mp] Lp 5193.1 mm.
Unbraced length Lb 2000 mm.
Lateral torsional buckling modification factor Cb 1
Nominal flexural Lb <= Lp Not consider Mn Not consider kN-m.

Nominal flexural strength Mn 44.74 kN-m.

Design flexural strength ASD Mc = Mn / Ωb Mc 26.79 kN-m.
Design flexural strength LRFD Mc = Mn Φb Mc 40.27 kN-m.

Design of members for shear (Section G4)

Φv 0.90 LRFD Ωv 1.67 ASD
Web area Aw = 2 ht h = d-3t Aw 2184 mm2
Web plate buckling coefficient kv kv 5
h/t h/t 30.33
(Kv E/Fy)^0.5 65.23
Web shear coefficient Cv2 Cv2 1.00
Nominal shear strength Vn = 0.6 Fy Aw Cv2 Vn 307.94 kN.
Design shear strength ASD Vc = Vn / Ωv Vc 184.40 kN.
Design shear strength LRFD Vc = Vn Φv Vc 277.15 kN.

Design of members for Torsion (Section H3.1)

ΦT 0.90 LRFD ΩT 1.67 ASD

Critical stress Fcr Fcr 141.00 Mpa

Nominal torsion strength Tn = Fcr C Tn 30.74 kN-m.
Design torsion strength ASD Tc = Tn / ΩT Tc 18.41 kN-m.
Design torsion strength LRFD Tc = Tn ΦT Tc 27.66 kN-m.

CHECK INTERACTION STRENGTH

LRFD Load and Resistance Factor Design
Internal force Design force
Axial load + comp., - tension 100 kN Axial load 683.85 kN
Moment 30 kN-m. Moment 40.27 kN-m.
Shear 30 kN Shear 277.15 kN
Torsion 0 kN-m. Torsion 27.66 kN-m.

Axial Demand-capacity ratio Demand / Capacity 0.15 …OK…

Moment Demand-capacity ratio Demand / Capacity 0.74 …OK…
Shear Demand-capacity ratio Demand / Capacity 0.11 …OK…
Torision Demand-capacity ratio Demand / Capacity 0.00 …OK…
Combine Flexure and Axial Force Section H 1.1 Pr/2Pc + (Mrx/Mcx) ≤ 1.0 0.82 …OK…