University of Engineering and Technology Abbottabad University of Engineering and Technology Abbottabad (Satellite Campus)
University of Engineering and Technology Abbottabad University of Engineering and Technology Abbottabad (Satellite Campus)
Registration No 19Abelt0829
19Abelt0831
19Abelt0838
19Abelt0845
Lab No 05
Date 24-12-2021
Report Verification:
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
EXPERIMENT NO.6
Voltage regulation of synchronous generator
OBJECTIVE:
The basic purpose of this experiment is to find percentage difference of voltage
regulation of synchronous generator
APPARATUS:
DC shunt generator.
R.P.M Meter.
Power supply for DC shunt generator field (F1,F2).
DC drive for Prime mover.
Volt meters.
Ammeters.
Load.
Connecting leads.
Procedure
Generator is connected in star or Y connection.
Set the manual excitation and adjust speed control of prime mover to zero.
Start the prime mover and adjust the speed to nominal 3000 rev-min.
Keep a constant excitation current Iƒ of 1Ã̃and vary the speed in increment of 50rev-min to
a maximum of 3500rev-min. at each increment, record the out-put terminal voltage and
speed in table 6-1.
Relations
VαN
Vαϕ
ϕα Iƒ
Vα Iƒ
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
Circuit Diagram:
At No Load:
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
At Full Load:
Voltage Full-
load
voltage
6.3V 87V
10V 116.5 V
15.5V 156.2 V
19.19V 169.1 V
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
6.3V 86.2V
9.94 V 148.9 V
14.95V 187.2 V
19.19V 204.2 V
Change∈Output voltage
Regulation=
no load output voltage
Voltage no load−voltage full load
Regulation=
voltage no load
Group#02
LAB REPORT ELACTRICAL MACHINE PERFOREMED BY ABDULLAH, MUJAHID, AHSAN AND MEHTAB
Group#02