Spring Vibration Isolator

General Specification
Unless otherwise noted on the equipment schedule, all mechanical equipment
(fans) shall be mounted on vibration isolators to prevent the transmission of
vibration and mechanical transmitted sound to the building structure. Vibration
isolators shall be selected in accordance with the weight distribution so as to
produce reasonably uniform deflection.

Kruger Spring Vibration Isolator is design of free-standing, laterally stable without

any house, single steel spring specially design to use with Kruger fan series.

Consist of spring mounting caps assembled with level adjustment bolts and
locking screws, steel spring and molded non-skid neoprene base is available with
25 mm deflection type (SBA Series) and 50 mm deflection type (SBB Series).

Application
Kruger spring vibration isolator is recommended for use to isolating floor
mounting sources of noise and vibration located near critically quiet area. They
are typically used to reduce the transmission of noise and vibration from low
speed mechanical equipments (fans) into a building structure.

Typical Installation

Centrifugal fan Axial fan

Deflection
Deflection is the change in a flexible element’s unloaded to loaded height.

Load

Free Height Adjusted to operating height

 25mm Deflection Type
Rated Load Spring Dimension (mm)
Model Rate Free Height/ Spring
(kg) (lbs) (kg/mm) Opt. Height O.D. S
Locking Screw ‘S’
Level Adjusting Bolt SBA-A03 3 6.6 0.116 95 Ø 51 M10 x 25
SBA-A04 4 8.8 0.166 95 Ø 51 M10 x 25
Operating Height

SBA-A05 5 11.0 0.199 95 Ø 51 M10 x 25

Free Height/

SBA-A06 6 13.2 0.237 95 Ø 51 M10 x 25

SBA-A08 8 17.6 0.320 95 Ø 51 M10 x 25
SBA-A10 10 22.0 0.407 95 Ø 51 M10 x 25
SBA-A13 13 28.6 0.526 95 Ø 51 M10 x 25
SBA-A16 16 35.2 0.645 95 Ø 51 M10 x 25
105 SBA-A20 20 44.0 0.773 95 Ø 51 M10 x 25
SBA-A25 25 55.0 1.03 95 Ø 51 M10 x 25
SBA-A32 32 70.4 1.30 95 Ø 51 M10 x 25
SBA-A40 40 88.0 1.65 95 Ø 51 M10 x 25
Ø10 SBA-A50 50 110 2.03 95 Ø 51 M10 x 25
SBA-A63 63 138.6 2.63 95 Ø 51 M10 x 25
58

SBA-A80 80 176 3.21 95 Ø 51 M10 x 25

SBA-A100 100 220 3.87 95 Ø 51 M10 x 25
83 SBA-A125 125 275 5.21 95 Ø 51 M10 x 25
SBA-A160 160 352 6.79 95 Ø 51 M10 x 25
SBA-A200 200 440 8.69 95 Ø 51 M10 x 25

25mm Deflection Type

Rated Load Spring Dimension (mm)
Model Rate Free Height/ Spring
(kg) (lbs) (kg/mm) Opt. Height O.D. S
Locking Screw ‘S’
Level Adjusting Bolt SBA-B13 13 28.6 0.527 145 Ø 60.3 M10 x 25
SBA-B16 16 35.2 0.643 145 Ø 60.3 M10 x 25
Operating Height

SBA-B20 20 44.0 0.769 145 Ø 60.3 M10 x 25

Free Height/

SBA-B25 25 55.0 1.00 145 Ø 60.3 M10 x 25

SBA-B32 32 70.4 1.27 145 Ø 60.3 M10 x 25
SBA-B40 40 88.0 1.53 145 Ø 60.3 M10 x 25
SBA-B50 50 110 2.04 145 Ø 60.3 M10 x 25
SBA-B63 63 138.6 2.62 145 Ø 60.3 M10 x 25
133
SBA-B80 80 176 3.39 145 Ø 60.3 M10 x 25
SBA-B100 100 220 4.03 145 Ø 60.3 M10 x 25

Ø13
SBA-B125 125 275 5.25 145 Ø 60.3 M10 x 25
SBA-B160 160 352 7.05 145 Ø 60.3 M10 x 25
75

SBA-B200 200 440 8.57 145 Ø 60.3 M10 x 25

SBA-B250 250 550 10.8 145 Ø 60.3 M10 x 25
102 SBA-B315 315 693 13.2 145 Ø 60.3 M10 x 25
SBA-B400 400 880 17.9 145 Ø 60.3 M10 x 25
SBA-B500 500 1100 21.5 145 Ø 60.3 M10 x 25
SBA-B630 630 1386 26.9 145 Ø 60.3 M10 x 25
 50mm Deflection Type
Rated Load Spring Dimension (mm)
Locking Screw ‘S’
Model Rate Free Height/ Spring
Level Adjusting Bolt (kg) (lbs) S
(kg/mm) Opt. Height O.D.
SBB-A06 6 13.2 0.113 120 Ø 51 M10 x 25
Operating Height
Free Height/

SBB-A08 8 17.6 0.157 120 Ø 51 M10 x 25

SBB-A10 10 22.0 0.192 120 Ø 51 M10 x 25
SBB-A13 13 28.6 0.269 120 Ø 51 M10 x 25
SBB-A16 16 35.2 0.304 120 Ø 51 M10 x 25

105
SBB-A20 20 44.0 0.401 120 Ø 51 M10 x 25
SBB-A25 25 55 0.496 120 Ø 51 M10 x 25
SBB-A32 32 70.4 0.654 120 Ø 51 M10 x 25
SBB-A40 40 88 0.809 120 Ø 51 M10 x 25
Ø10
SBB-A50 50 110 1.03 120 Ø 51 M10 x 25
58

SBB-A63 63 138.6 1.30 120 Ø 51 M10 x 25

SBB-A80 80 176 1.63 120 Ø 51 M10 x 25
SBB-A100 100 220 2.07 120 Ø 51 M10 x 25
83

50mm Deflection Type

Rated Load Spring Dimension (mm)
Locking Screw ‘S’ Model Rate
Level Adjusting Bolt Free Height/ Spring
(kg) (lbs) (kg/mm) Opt. Height O.D. S

SBB-B32 32 70.4 0.658 155 Ø 60.3 M10 x 25

Operating Height

SBB-B40 40 88 0.825 155 Ø 60.3 M10 x 25

Free Height/

SBB-B50 50 110.0 1.07 155 Ø 60.3 M10 x 25

SBB-B63 63 138.6 1.34 155 Ø 60.3 M10 x 25
SBB-B80 80 176 1.64 155 Ø 60.3 M10 x 25
SBB-B100 100 220.0 2.03 155 Ø 60.3 M10 x 25
SBB-B125 125 275 2.74 155 Ø 60.3 M10 x 25
133
SBB-B160 160 352 3.42 155 Ø 60.3 M10 x 25
SBB-B200 200 440 4.27 155 Ø 60.3 M10 x 25
SBB-B250 250 550 5.18 155 Ø 60.3 M10 x 25
Ø13
SBB-B315 315 693 6.28 155 Ø 60.3 M10 x 25
75

SBB-B400 400 880 9.27 155 Ø 60.3 M10 x 25

SBB-B500 500 1100 10.5 155 Ø 60.3 M10 x 25

102 SBB-B630 630 1386 12.8 155 Ø 60.3 M10 x 25

The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products.
Certified dimension can be provided upon request.

LEA059.E0 January 2018 KRUGER VENTILATION INDUSTRIES ASIA CO LTD A member of

Edition 4
- 30/159 Moo 1, Sinsakorn Industrial Estate, Chetsadawithi road,
Printed in January 2018
Khok Kham, Mueng, Samutsakorn 74000, Thailand
- Tel +662 1054298 - Fax+662 0248256-9
- www.krugerfan.com