========================================================================

*** Basic Information ***

========================================================================
[Create date] 2017/05/15
------------------------------------------------------------------------
[Program Name] SYSTEM:XGA:ALT-2
------------------------------------------------------------------------
[Version] 10011606-1010
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] Y0515956N
[File Information]
File Name Y0515956N.sfw
File Type Module for Service and Machine Trigger Upgrade(.sfw)
Size 54.34 MB ( 56982252 byte )
------------------------------------------------------------------------
[Production reflection] 2017/06
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================

Y0515956N_readme.txt[2017/05/17 6:59:04]
 [Modifications made:]
1) Additional model information
None.

2) Specification changes
None.

3) Fixes
- When multi-byte characters are used in the wireless LAN SSID, connections
cannot be made in infrastructure mode.
- A warning will be displayed when Web Image Monitor is used in Safari 10.
- Network errors may occur if the device power is turned on and off repeatedly.

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 10011606-1009
1) Additional Model Information:
None

2) Changes:
Corresponds to the EU ErP directive Lot 6 criteria, which will be in effect
as of January 1, 2017.

3) Fixes:
Firmware versions:
- MAIN: 1001160600
- NETWORK: 100900
- SYSTEM: 10011606-1009

----------------------------------------
Version 10011606-1008
1) Additional Model Information
None.

2) Changes
Support for Smart Device Connector's "Connect with QR code" function has
been added.
*Please change the input to "Network PC" when using it.

3) Fixes
- Rarely, the projector will display "Please wait" and then freeze when
powered on.
- Movie replays will freeze or be delayed when run via Miracast from some
smartphone models.
- The screen will freeze when projecting from some smartphone models via
Miracast.

Remarks
F/W versions:
- MAIN:1001160600

Y0515956N_readme.txt[2017/05/17 6:59:04]
 - NETWORK:100800
- SYSTEM:10011606-1008

----------------------------------------
Version 10011606-1006
1) Additional Model Information
None

2) Changes
- Improved stability when the temperature is high inside the projector.
- The new version of the service tool can obtain detailed error log
information regarding mercury bridge occurrences. The new version
will be released around the middle of March 2016.

3) Fixes
- It may take a long time to project the next movie when using DLNA
compliant hardware.
- The projector may be inoperable when setting the network configuration.
- The projector may be unable to communicate wirelessly after projecting
images using DLNA compliant hardware.
- The projector may be unable to power on after projecting movie files
via USB memory.
- The following changes have been made to reduce the mercury bridge
occurrence ratio.
- Lamp driving management.
- Increased the fan speed when turning off the projector.
- Increased the cooling time when turning off the projector.
- When the projector is installed on the floor:
5 sec. (current: 0 sec)
- When the projector is mounted onto the ceiling or
projecting onto the ceiling: 20 sec. (current: 0 sec.)
- When the projector is projecting onto the floor:
20 sec. (current: 20 sec., no change)

Remarks (FW version)

MAIN: 1001160600
NETWORK: 100600
SYSTEM: 10011606-1006

----------------------------------------
Version 1001606-1005
1) Additional models supported by this firmware:
None.

2) Changes:
- Increased usability when a user projects a smartphone's screen via a
Miracast that has been used previously with the same smartphone.
- Added a setting that allows for skipping the Miracast access confirmation
sequence on projectors.

3) Fixes:
- Logjam security hole.

Y0515956N_readme.txt[2017/05/17 6:59:04]
 - May fail to set the administrator password for the projector when accessing
Web Image Monitor via Internet Explorer.
- Improved Miracast response time.
- Improved Miracast interoperability with Windows computers.

Notes:
Firmware version
Main: 1000160600
Network: 100500
System: 10001606-1005

----------------------------------------
Version 10001606-1004
1) Additional hardware supported by this F/W:
None.

2) Specification changes:
None.

3) Fixes:
Unable to connect to the projector via Miracast in specific network environments.

----------------------------------------
Version 10001606-1003
1) Additional hardware supported by this F/W:
None.

2) Specification changes:
None.

3) Fixes:
- The projector may stop projecting in the case that a user is
projecting via Miracast from a Nexus 5.
- Improved projection quality in the case that the image is being
projected using QuickProjection via a wireless connection.
- The projector may stop projecting in the case that a user fast-
forwards a movie file on DLNA.
- The projector may freeze for a moment in the case that a user is
projecting using QuickProjection via a wireless connection.
- The projector may repeatedly stop and resume the projection in the
case that a user is projecting via QuickProjection.

----------------------------------------
Version 10001606-1002
1) Additional hardware supported by this F/W:
None.

2) Specification changes:
None.

3) Fixes

Y0515956N_readme.txt[2017/05/17 6:59:04]
 - In rare cases, the projector is not recognized by the DLNA controller.
- The projector becomes unstable if a user immediately removes the
USB memory source at the same time the projector begins projecting
an image contained on the USB memory source.
- The projector becomes unstable if a user changes the input source
when an image is being projected via Miracast.
- Depending on the eco-mode settings, the projector may become
unstable when turning the projector on via the power button.
- The projector stops projecting in the case that a user projects an
image using QuickProjection via a Macintosh computer and the
network connection changes from wireless to wired, or vice versa,
during the projection.

----------------------------------------
Version 10001606-1001
1st Mass production

Y0515956N_readme.txt[2017/05/17 6:59:04]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2018/10/17
------------------------------------------------------------------------
[Program Name] SYSTEM:XGA:ALT-2
------------------------------------------------------------------------
[Version] 10011606-1012
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] Y0515956P
[File Information]
File Name Y0515956P.sfw
File Type Module for Service and Machine Trigger Upgrade(.sfw)
Size 54.33 MB ( 56970780 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/11
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

/Y0515956P_SYSTEM_XGA_ALT-2_readme.txt[2019/01/26 12:49:31]
 1)Additional Model Information
None.

2)Specification Changes
- WPA2 KRACKs vulnerability fixed.

3)Fix
- Image distortion may occurs on irregular JPEG resolution.

F/W versions:
- MAIN:1001160600
- NETWORK:101200
- SYSTEM:10011606-1012

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 10011606-1010
1) Additional model information
None.

2) Specification changes
None.

3) Fixes
- When multi-byte characters are used in the wireless LAN SSID, connections
cannot be made in infrastructure mode.
- A warning will be displayed when Web Image Monitor is used in Safari 10.
- Network errors may occur if the device power is turned on and off repeatedly.

----------------------------------------
Version 10011606-1009
1) Additional Model Information:
None

2) Changes:
Corresponds to the EU ErP directive Lot 6 criteria, which will be in effect
as of January 1, 2017.

3) Fixes:
Firmware versions:
- MAIN: 1001160600
- NETWORK: 100900
- SYSTEM: 10011606-1009

----------------------------------------
Version 10011606-1008
1) Additional Model Information
None.

2) Changes

/Y0515956P_SYSTEM_XGA_ALT-2_readme.txt[2019/01/26 12:49:31]
 Support for Smart Device Connector's "Connect with QR code" function has
been added.
*Please change the input to "Network PC" when using it.

3) Fixes
- Rarely, the projector will display "Please wait" and then freeze when
powered on.
- Movie replays will freeze or be delayed when run via Miracast from some
smartphone models.
- The screen will freeze when projecting from some smartphone models via
Miracast.

Remarks
F/W versions:
- MAIN:1001160600
- NETWORK:100800
- SYSTEM:10011606-1008

----------------------------------------
Version 10011606-1006
1) Additional Model Information
None

2) Changes
- Improved stability when the temperature is high inside the projector.
- The new version of the service tool can obtain detailed error log
information regarding mercury bridge occurrences. The new version
will be released around the middle of March 2016.

3) Fixes
- It may take a long time to project the next movie when using DLNA
compliant hardware.
- The projector may be inoperable when setting the network configuration.
- The projector may be unable to communicate wirelessly after projecting
images using DLNA compliant hardware.
- The projector may be unable to power on after projecting movie files
via USB memory.
- The following changes have been made to reduce the mercury bridge
occurrence ratio.
- Lamp driving management.
- Increased the fan speed when turning off the projector.
- Increased the cooling time when turning off the projector.
- When the projector is installed on the floor:
5 sec. (current: 0 sec)
- When the projector is mounted onto the ceiling or
projecting onto the ceiling: 20 sec. (current: 0 sec.)
- When the projector is projecting onto the floor:
20 sec. (current: 20 sec., no change)

Remarks (FW version)

MAIN: 1001160600
NETWORK: 100600
SYSTEM: 10011606-1006

----------------------------------------

/Y0515956P_SYSTEM_XGA_ALT-2_readme.txt[2019/01/26 12:49:31]
 Version 1001606-1005
1) Additional models supported by this firmware:
None.

2) Changes:
- Increased usability when a user projects a smartphone's screen via a
Miracast that has been used previously with the same smartphone.
- Added a setting that allows for skipping the Miracast access confirmation
sequence on projectors.

3) Fixes:
- Logjam security hole.
- May fail to set the administrator password for the projector when accessing
Web Image Monitor via Internet Explorer.
- Improved Miracast response time.
- Improved Miracast interoperability with Windows computers.

Notes:
Firmware version
Main: 1000160600
Network: 100500
System: 10001606-1005

----------------------------------------
Version 10001606-1004
1) Additional hardware supported by this F/W:
None.

2) Specification changes:
None.

3) Fixes:
Unable to connect to the projector via Miracast in specific network environments.

----------------------------------------
Version 10001606-1003
1) Additional hardware supported by this F/W:
None.

2) Specification changes:
None.

3) Fixes:
- The projector may stop projecting in the case that a user is
projecting via Miracast from a Nexus 5.
- Improved projection quality in the case that the image is being
projected using QuickProjection via a wireless connection.
- The projector may stop projecting in the case that a user fast-
forwards a movie file on DLNA.
- The projector may freeze for a moment in the case that a user is
projecting using QuickProjection via a wireless connection.
- The projector may repeatedly stop and resume the projection in the
case that a user is projecting via QuickProjection.

/Y0515956P_SYSTEM_XGA_ALT-2_readme.txt[2019/01/26 12:49:31]
 ----------------------------------------
Version 10001606-1002
1) Additional hardware supported by this F/W:
None.

2) Specification changes:
None.

3) Fixes
- In rare cases, the projector is not recognized by the DLNA controller.
- The projector becomes unstable if a user immediately removes the
USB memory source at the same time the projector begins projecting
an image contained on the USB memory source.
- The projector becomes unstable if a user changes the input source
when an image is being projected via Miracast.
- Depending on the eco-mode settings, the projector may become
unstable when turning the projector on via the power button.
- The projector stops projecting in the case that a user projects an
image using QuickProjection via a Macintosh computer and the
network connection changes from wireless to wired, or vice versa,
during the projection.

----------------------------------------
Version 10001606-1001
1st Mass production

/Y0515956P_SYSTEM_XGA_ALT-2_readme.txt[2019/01/26 12:49:31]
 ========================================================================
*** Basic Information ***
========================================================================
[Create date] 2018/10/17
------------------------------------------------------------------------
[Program Name] SYSTEM:WXGA:ALT-2
------------------------------------------------------------------------
[Version] 10011606-1012
------------------------------------------------------------------------
[PCB No.]
------------------------------------------------------------------------
[Interchangeability] X / O
------------------------------------------------------------------------
[Other Firmware Requirements] None
------------------------------------------------------------------------
[PCB Requirements] None
------------------------------------------------------------------------
[Software category] Normal Release
------------------------------------------------------------------------
[Release category] Normal Release
------------------------------------------------------------------------
[Program category] Firmware
------------------------------------------------------------------------
Exported to(language) GEN(all)
[Firmware No.] Y0535956P
[File Information]
File Name Y0535956P.sfw
File Type Module for Service and Machine Trigger Upgrade(.sfw)
Size 54.36 MB ( 56998348 byte )
[Availability of RFU] No
------------------------------------------------------------------------
[Production reflection] 2018/11
------------------------------------------------------------------------

========================================================================
*** Note ***
========================================================================
[Note]

------------------------------------------------------------------------

========================================================================
*** Important Notes ***
========================================================================
[Important Notes]

------------------------------------------------------------------------

========================================================================
*** Modification History ***
========================================================================
[Modifications made:]
Rank C

/Y0535956P_SYSTEM_WXGA_ALT-2_readme.txt[2019/01/26 12:49:33]
 1)Additional Model Information
None.

2)Specification Changes
- WPA2 KRACKs vulnerability fixed.

3)Fix
- Image distortion may occurs on irregular JPEG resolution.

F/W versions:
- MAIN:1001160600
- NETWORK:101200
- SYSTEM:10011606-1012

------------------------------------------------------------------------
[Modification history]
----------------------------------------
Version 10011606-1010
1) Additional model information
None.

2) Specification changes
None.

3) Fixes
- When multi-byte characters are used in the wireless LAN SSID, connections
cannot be made in infrastructure mode.
- A warning will be displayed when Web Image Monitor is used in Safari 10.
- Network errors may occur if the device power is turned on and off repeatedly.

----------------------------------------
Version 10011606-1009
1) Additional Model Information:
None

2) Changes:
Corresponds to the EU ErP directive Lot 6 criteria, which will be in effect
as of January 1, 2017.

3) Fixes:
Firmware versions:
- MAIN: 1001160600
- NETWORK: 100900
- SYSTEM: 10011606-1009

----------------------------------------
Version 10011606-1008
1) Additional Model Information
None.

2) Changes
Support for Smart Device Connector's "Connect with QR code" function has
been added.

/Y0535956P_SYSTEM_WXGA_ALT-2_readme.txt[2019/01/26 12:49:33]
 *Please change the input to "Network PC" when using it.

3) Fixes
- Rarely, the projector will display "Please wait" and then freeze when
powered on.
- Movie replays will freeze or be delayed when run via Miracast from
some smartphone models.
- The screen will freeze when projecting from some smartphone models
via Miracast.

Remarks
F/W versions:
- MAIN:1001160600
- NETWORK:100800
- SYSTEM:10011606-1008

----------------------------------------
Version 10011606-1006
1) Additional Model Information
- None
2) Changes
- Improved stability when the temperature is high inside the projector.
- The new version of the service tool can obtain detailed error log
information regarding mercury bridge occurrences. The new version
will be released around the middle of March 2016.
3) Fixes
- It may take a long time to project the next movie when using DLNA
compliant hardware.
- The projector may be inoperable when setting the network configuration.
- The projector may be unable to communicate wirelessly after projecting
images using DLNA compliant hardware.
- The projector may be unable to power on after projecting movie files via
USB memory.
- The following changes have been made to reduce the mercury bridge
occurrence ratio.
- Lamp driving management.
- Increased the fan speed when turning off the projector.
- Increased the cooling time when turning off the projector.
- When the projector is installed on the floor:
5 sec. (current: 0 sec)
- When the projector is mounted onto the ceiling or
projecting onto the ceiling: 20 sec. (current: 0 sec.)
- When the projector is projecting onto the floor:
20 sec. (current: 20 sec., no change)

Remarks(F/W version)
MAIN: 1001160600
NETWORK: 100600
SYSTEM: 10011606-1006

----------------------------------------
Version 1001606-1005
1) Additional models supported by this firmware:
None.

/Y0535956P_SYSTEM_WXGA_ALT-2_readme.txt[2019/01/26 12:49:33]
 2) Changes:
- Increased usability when a user projects a smartphone's screen via a
Miracast that has been used previously with the same smartphone.
- Added a setting that allows for skipping the Miracast access confirmation
sequence on projectors.

3) Fixes:
- Logjam security hole.
- May fail to set the administrator password for the projector when accessing
Web Image Monitor via Internet Explorer.
- Improved Miracast response time.
- Improved Miracast interoperability with Windows computers.

Notes:
Firmware version
Main: 1000160600
Network: 100500
System: 10001606-1005

----------------------------------------
Version 10001606-1004
1) Additional hardware supported by this F/W:
None.

2) Specification changes:
None.

3) Fixes:
Unable to connect to the projector via Miracast in specific network environments.

----------------------------------------
Version 10001606-1003
1) Additional hardware supported by this F/W:
None.

2) Specification changes:
None.

3) Fixes:
- The projector may stop projecting in the case that a user is
projecting via Miracast from a Nexus 5.
- Improved projection quality in the case that the image is being
projected using QuickProjection via a wireless connection.
- The projector may stop projecting in the case that a user fast-
forwards a movie file on DLNA.
- The projector may freeze for a moment in the case that a user is
projecting using QuickProjection via a wireless connection.
- The projector may repeatedly stop and resume the projection in the
case that a user is projecting via QuickProjection.

----------------------------------------
Version 10001606-1002
1) Additional hardware supported by this F/W:
None.

/Y0535956P_SYSTEM_WXGA_ALT-2_readme.txt[2019/01/26 12:49:33]
 2) Specification changes:
None.

3) Fixes
- In rare cases, the projector is not recognized by the DLNA controller.
- The projector becomes unstable if a user immediately removes the
USB memory source at the same time the projector begins projecting
an image contained on the USB memory source.
- The projector becomes unstable if a user changes the input source
when an image is being projected via Miracast.
- Depending on the eco-mode settings, the projector may become
unstable when turning the projector on via the power button.
- The projector stops projecting in the case that a user projects an
image using QuickProjection via a Macintosh computer and the
network connection changes from wireless to wired, or vice versa,
during the projection.

----------------------------------------
Version 10001606-1001
1st Mass production

/Y0535956P_SYSTEM_WXGA_ALT-2_readme.txt[2019/01/26 12:49:33]