TRIMEKSTAL INDUSTRIAL SUPPLY INC

TEL 519-4237 / 463-9726 / 463-9725 / 533-6082

T/FAX 519-4161 / (044) 794-3609 [email protected]

DIN - MAT No. AISI - SAE JIS HARDENING QUENCHING HARDNESS AFTER TEMPERING
BRANDS CHEMICAL COMPOSITION %
CHARACTERISTIC AND APPLICATION °C MEDIUM HARDENING HRC TEMP °C

HIGH SPEED STEEL

1.3343 M2 SKH - 5T Tungsten-Molybdenum grade with outstanding high red hardness and excellent cutting properties. Best suited for taps, 1190-1230 WB, salt, bath, oil, air 64-66 540-570
Dmo 5V twist drillreamers, broaches, metal saws, milling tools of all types, coldwork tools and woodworking tools.
0.90C 0.33SI 0.28Mn 4.1Cr 3.0Mo 1.5V 6.4W
Edelstahlwerk
COLD WORK STEEL
1.2379 D2 SKDII Ledeburitic 12% chrome steel. Extraordinary high wear resistanca combines with maximum toughness at high hardness in section of all 1020-1040 Oil,salt,bath,air 63-64 100-40o
Ossenberg
ESMo2 sizes, widely used such as thread rolling dies, drawing, deep drawing, extrusion, shear blades, wear parts and in any application requiring
1.53C 0.30Si 0.30Mn 12.0Cr 0.7Mo 1.0V extreme stability during high treatment.
1.208 D3 SKDII High stressed cutting and punching tools for thin sheets, profile rolls, deep drawing tools, stone processing tools, knives 930-980 Oil,salt,bath,air 62-64 100-400
ESC
GERMANY
2.1C 0.2Si 0.3Mn 12.0Cr to paper and plastic, shear knives for thin sheets.
1.2436 D6 SK-1/SKD-2 950-980 Oil,salt,bath,air 62-64 100-400
ESS High carbon high chromium group. Heavy duty cutting tools, blanking tools, thread rolling dies, drawing, deep drawing.
2.1C 0.35Si 0.35Mn 12.0Cr
1.251 O1 SKS-3 Cutting and forming tools as well as blanking and stamping dies for sheet up to 6mm thickness. Machine knives for 780-820 Oil,salt,bath 62-64 100-400
1.251
0.95C 0.3Si 1.1Mn 0.5Cr 0.1V 0.5W paper and plastic cutting blade, forming, drawing, molding spindles, trimming dies, etc. COMPASSION OF HARDNESS TABLE
1.2842 O2 Cutting tools and punching tools, blanking, forming, drawing, molding, trimmingdies spindles, thread gauges, collets and 790-820 Oil,salt,bath 62-64 100-400 N/mm² BHN HRC
UVW 2 stamps, wood working industries. 650 193
0.9C 0.25Si 2.0Mn 0.35Cr 0.13V
1.255 S1 SKS41 Blanking dies, coining tools, cold shear blade, shank tools for pneumatic equipment. Shear blades for gauge up to 870-900 Oil 58-60 100-400 660 195
EKL 12mm thickness. 680 201
0.63C 0.6Si 0.3Mn 1.1Cr 0.18V 2.0W
1.2767 6F7 A shock resisting tool steel well suited for many tools requiring exeptional toughness. Cold shear blades for billet 840-870 Oil,salt,bath 54-56 100-400 690 204
ELB Espezial cutters, blanking dies for large sizes reinforcement bar cutter, plastic moulds. 705 209
0.45C 0.35Si 0.4Mn 1.3Cr 0.25Mo 4.0Ni

730 216
755 223
HOT WORK STEEL 780 231 21
1.2344 H-13 SKD-61 Design to retain hardness at elevated temperatures, features high not strength and exceptional toughness. Tools for 1020-1080 Air,salt,bath 52-54 400-600 800 238 22
EPS 51 V extrusion, forging dies, casting dies, forming dies, die inserts and hot shear blades. 820 242 23
0.4C 1.0Si 0.4Mn 5.1Cr 1.3Mo 1.0V
1.2365 H-10 SKD-10 840-870 Oil,salt,bath 50-52 400-600 835 247 24
EPS 33 Heavy gauge materials for die casting, inner liners, press and piercing mandrels, die inserts.
860 255 25
0.31C 0.3Si 0.35Mn 2.9Cr 2.8Mo 0.5V

870 258 26
900 266 27
PLASTIC MOULD STEEL 920 273 28
1.2311 P20 840-860 Oil,air 48-51 100-300 940 278 29
ECNK Standard grade for plastic mould frames. Good polishability and photoetching properties suitable for chrome plating.
970 287 30
0.4C 0.3Si 1.5Mn 2.0Cr 0.2Mo
1.2738 P20+Ni SKS538 Highly recommending for plastic mould over 400mm. Hardened and tempered 250-323HB. Hardenability is improved 840-870 Oil,hot bath 48-51 100-400 995 295 31
NE35Ni compared to P20. Mould frames for plastic mould and pressure casting dies. 1020 301 32
0.40C 1.5Mn 1.9Cr 0.2Mo 1.0Ni \
1.2083 420SS 1020-1050 Oil 54-56 100-500 1050 311 33
BPS 2 Good machinability, good polishability due to additional Ca treatment. Moulds for processing corrosively acting plastics.
1080 313 34
0.23C 0.45Si 0.45Mn 13.5Cr
1.2316 High chromium plastic mould steel. Good polishability and photoetching properties supplied in quenched and tempered 1000-1050 Oil 46-48 100-400 1110 319 35
BSC 16Cr conditions. Moulds for processing corrosively acting plastic. 1140 337 36
0.38C O.4Si 0.65Mn 16.0Cr 1.0Mo 0.8Ni

1170 346 37
1200 354 38
CASE HARDENING STEEL
1230 363 39
1.5919 3215 Highly stressed gearing parts. Shafts, crank shafts, heavy duty gear shafts in aircraft and truck constructions, generel 880-980 Oil,salt,bath 60-62 150-200 1260 372 40
CH20 engineering.
0.17C 0.3Si 0.5Mn 1.5Cr 1.6Ni 1300 383 41
1330 393 42
1360 402 43
MACHINERY STEEL
1400 413 44
1.6582 4340 SNCM-1 Highly stressed automobile and engineering parts such as shafts, crank shafts, connecting rods, gear shaft, steering 830-860 Oil 56-58 540-680 1440 424 45
ES82Ni
0.34C 0.3Si 0.5Mn 1.5Cr 1.6Ni 0.2Mo knuckles. Supplied quenched and tempered with Ni present, more toughness compared to ES42Mo. 1480 435 46
1.7225 4140 SCM-4 Components in machine industry and automobile. Standard grade for shafts, crank shafts, rods, connecting rods, pinion 830-860 Oil 54-56 540-680 1530 449 47
ES42Mo
0.41C 0.3Si 0.7Mn 1.1Cr 0.2Mo intermediate gear and gear shafts. 1570 460 48
1620 472 49
1680 488 50
CARBON TOOL STEEL
1730 501 51
1.173 1045 S45C Components for tools such as base plates. Placstic moulding and pressure casting dies. Tensile strength as supplied 800-830 Water 45 100-420 1790 517 52
WO3 650N/mm.
0.45C 0.30Si 0.70Mn 1845 532 53
1.1745 1060 S60C 830-860 Oil,water 45 100-420 1910 549 54
WO5 Build - up materials for agricultural tools and the hikes. Tensile strength are supplied approx. 850/mm².
0.60C 0.3Si 0.7Mn 1980 567 55
2050 584 56
2140 607 57
SPECIAL GRADE STEEL
2200 622 58
1.4125 440C Excellent hardened tools requiring high wear and corrosive resistance. Best suited for knife blades cutting surgical 1000-1050 Oil 60 100-250 59
RFSH 6
1.05C 0.4Si 0.4Mn 17.0Cr 0.50Mo instruments. 60
1.221 L2 780-840 Oil 64 100-500 61
CRV Suitable for piercing punches, guide pins, twist drills, taps, ejector pins and tooth drills.
1.20C 0.7Cr 0.1V