NTC Power

Thermistor
NSE SENSOR CO., LTD

Ma-2124,15, Gyeongin-ro 53-gil, Guro-gu, Seoul, Republic of Korea

TEL : 82-2-6679-8195 FAX : 82-2-6679-8196
Email: [email protected]
 NTC POWER THERMISTOR

NTC POWER THERMISTOR

Application
Temperature measurement and control of household and automobile
air-condition, refrigeratory, icebox, water heater, drinking trough,
radiator, dishwasher, disinfector, washing machine, drying machine,
middle-or-low-temperature drying box and constant temperature box.

Characteristics <NTC POWER THERMISTOR>

Adopting new technique, Steady product performance, Capability of

long time operating
Advantage
- High precision of resistance and B value, Good coherence, • Fast Response
Interchange capable • Reliable temperature
detection
- Fast response, High delicacy
• Available in a wide variety of shapes and colors
- Good quality of insulationnand package, High capability of colliding
and bending resistance and High

Type NTC Power Thermistor Customer Check Point

Function Good quality of coherence and interchange
• Is the temperature sensor suitable for use?
• Is waterproof function used in an environment?
Air-Conditioner Equipments, Electric
Application • Do you need a connector at the end of the wire?
table-board, Battery
Working Temperature Range -40 ~ +105℃ / +125℃
Rated Resistance
0.1 ~ 1000K (KΩ)
(R25)
B value(25/50℃) 3100 ~ 4550 (K)

Caution
- You should consider the temperature of your environment. If not careful,
the epoxy may melt or cause distortion in the wires. NSE-SENSOR Co.,
Ltd 20180517 Write
- In basic design, reference should be made to the RT table of the data. +82-2-6679-8195
[email protected]
- This product is for temperature detection only. www.nse-sensor.com
 NTC POWER THERMISTOR

Part Numbering Form

1 2 3 4 5 6 7 8

NTC 22 D 9 M IF 050 P

1 Product Type NTC POWER THERMISTOR

2 Zero Power Resistance(R25) 0.7 ∼ 400Ω

3 Shape DISK
4 Diameter of Element 7∅ / 9∅ / 11∅ / 13∅ / 15∅ / 22∅ / 25∅
5 The tolerance of Resistance M (±20%)

6 Lead Type S = Straight / O = Out Forming / IF = In Forming

7 Lead Length 040 = 4mm / 050 = 5mm / 250 = 25mm

8 Type Of Coating S = Silicon Coating / P = Phernols Coating

Dimmension
Sym Straight Curved lead
T d F1 F2
Dim(mm) Dmax lead
max ± 0.05 ±1 ± 1.5 L2 ± 2
L1min
Part No Lmin

NTC □D5 7.0 5 0.6/0.45 5/2.5 3 25 17.5 8/5

NTC □D7 9.0 5 0.6 5.0 3 25 17.5 8/5

NTC □D9 11.0 5.5 0.8/0.6 7.5/5 5/3 25 17.5 8/5

NTC □D11 13.0 5.5 0.8 7.5/5 5/3 25 17.5 8/5

NTC □D13 15.5 6 0.8 7.5 5 25 17.5 8/5

NTC □D15 17.5 6 0.8 10/7.5 5 25 17.5 8/5

NTC □D22 22.5 7 1.0 10/7.5 / 25 / /

NTC □D25 27.5 8 1.0 10/7.5 / 25 / /

Caution NSE-SENSOR Co.,

- In order to use the product, there must be information about the resistance - Ltd 20180517 Write
+82-2-6679-8195
In basic design, reference should be made to the RT table of the data.
[email protected]
- This product is dedicated to the inrush current limit. www.nse-sensor.com
 NTC POWER THERMISTOR

MAIN THECHNO-PARAMETER
Max. Steady
R25 Approx. R of Dissi Coef Thermal Time
Part No. State Current Operating Temp. (℃)
(Ω) Max . Cur (Ω) (Mw/℃) Constant(S)
(A)
5D5 5 1 0.353

10D5 10 0.7 0.771

15 17
60D5 60 0.3 1.878

200D5 200 0.1 18.7

5D7 5 2 0.283

8D7 8 1 0.539
-40 ∼ +150'C
10D7 10 1 0.616

12D7 12 1 0.816
16 27
16D7 16 0.7 1.003

22D7 22 0.6 1.108

33D7 33 0.5 1.485

200D7 200 0.2 11.65

3D9 3 4 0.120

4D9 4 3 0.190

5D9 5 3 0.210

6D9 6 2 0.315

8D9 8 2 0.400 16 38 -40 ∼ +170'C

10D9 10 2 0.458

12D9 12 1 0.652

16D9 16 1 0.802

20D9 20 1 0.864

Caution NSE-SENSOR Co.,

- In order to use the product, there must be information about the resistance - Ltd 20180517 Write
+82-2-6679-8195
In basic design, reference should be made to the RT table of the data.
[email protected]
- This product is dedicated to the inrush current limit. www.nse-sensor.com
 NTC POWER THERMISTOR

MAIN THECHNO-PARAMETER
Max. Steady
R25 Approx. R of Dissi Coef Thermal Time
Part No. State Current Operating Temp. (℃)
(Ω) Max . Cur (Ω) (Mw/℃) Constant(S)
(A)
22D9 22 1 0.950

30D9 30 1 1.022

33D9 33 1 1.124

50D9 50 1 1.252

60D9 60 0.8 1.502 16 38

80D9 80 0.8 2.010

120D9 120 0.8 3.015

200D9 200 0.5 5.007

400D9 400 0.2 30.30

2.5D11 2.5 5 0.095

3D11 3 5 0.100 -40 ∼ +170'C

4D11 4 4 0.150

5D11 5 4 0.156

6D11 6 3 0.24

8D11 8 3 0.255

10D11 10 4 0.275

12D11 12 2 0.462 17 43

16D11 16 2 0.470

20D11 20 2 0.512

22D11 22 2 0.563

30D11 30 1.5 0.667

Caution NSE-SENSOR Co.,

- In order to use the product, there must be information about the resistance - Ltd 20180517 Write
+82-2-6679-8195
In basic design, reference should be made to the RT table of the data.
[email protected]
- This product is dedicated to the inrush current limit. www.nse-sensor.com
 NTC POWER THERMISTOR

MAIN THECHNO-PARAMETER
Max. Steady
R25 Approx. R of Dissi Coef Thermal Time
Part No. State Current Operating Temp. (℃)
(Ω) Max . Cur (Ω) (Mw/℃) Constant(S)
(A)
33D11 33 1.5 0.734

50D11 50 1.5 1.021

17 43 -40 ∼ +170'C
60D11 60 1.5 1.215

80D11 80 1.2 1.656

1.3D13 1.3 7 0.062

1.5D13 1.5 7 0.073

2.5D13 2.5 6 0.088

3D13 3 6 0.092

4D13 4 5 0.120

5D13 5 5 0.125

6D13 6 4 0.170

7D13 7 4 0.188
18 66 -40 ∼ +200'C
8D13 8 4 0.194

10D13 10 43 0.206

12D13 12 3 0.316

15D13 15 3 0.335

16D13 16 3 0.338

20D13 20 3 0.372

30D13 30 2.5 0.517

47D13 47 2 0.810

120D13 120 1.5 2.124

Caution NSE-SENSOR Co.,

- In order to use the product, there must be information about the resistance - Ltd 20180517 Write
+82-2-6679-8195
In basic design, reference should be made to the RT table of the data.
[email protected]
- This product is dedicated to the inrush current limit. www.nse-sensor.com
 NTC POWER THERMISTOR

MAIN THECHNO-PARAMETER
Max. Steady
R25 Approx. R of Dissi Coef Thermal Time
Part No. State Current Operating Temp. (℃)
(Ω) Max . Cur (Ω) (Mw/℃) Constant(S)
(A)
1.3D15 1.3 8 0.048

1.5D15 1.5 8 0.052

2.5D15 2.5 7 0.065

3D15 3 7 0.075

5D15 5 6 0.112

6D15 6 5 0.155

7D15 7 5 0.173

8D15 8 5 0.178 21 75

10D15 10 5 0.180

12D15 12 4 0.250

15D15 15 4 0.268 -40 ∼ +200'C

16D15 16 2 0.276

20D15 20 2 0.288

30D15 30 2 0.438

47D15 47 2 0.680

120D15 120 1.5 1.652

0.7D22 0.7 1.5 0.018

1.3D22 1.3 1.5 0.037

3D22 3 1.5 0.055 28 113

5D22 5 1.2 0.087

6D22 6 7 0.113

Caution NSE-SENSOR Co.,

- In order to use the product, there must be information about the resistance - Ltd 20180517 Write
+82-2-6679-8195
In basic design, reference should be made to the RT table of the data.
[email protected]
- This product is dedicated to the inrush current limit. www.nse-sensor.com
 NTC POWER THERMISTOR

MAIN THECHNO-PARAMETER
Max. Steady
R25 Approx. R of Dissi Coef Thermal Time
Part No. State Current Operating Temp. (℃)
(Ω) Max . Cur (Ω) (Mw/℃) Constant(S)
(A)
8D22 8 6 0.142

10D22 10 6 0.162

12D22 12 5 0.195

16D22 16 5 0.212

0.7D25 0.7 12 0.014

1.5D25 1.5 10 0.027 30 130 -40 ∼ +200'C

3D25 2.5 9 0.044

5D25 5 8 0.070

8D25 8 7 0.114

10D25 10 7 0.130

12D25 12 6 0.156

16D25 16 6 0.160

Caution NSE-SENSOR Co.,

- In order to use the product, there must be information about the resistance - Ltd 20180517 Write
+82-2-6679-8195
In basic design, reference should be made to the RT table of the data.
[email protected]
- This product is dedicated to the inrush current limit. www.nse-sensor.com