RD254 Wheeled Tractor

Parts Catalogue

Chery Heavy Industry Co., Ltd.

 Brief Introduction of the Content
This catalogue systematically introduces main part names, part codes, part use amount of related
assemblies and the like of RD254 wheeled tractor through parts illustrations and parts lists and is used
in service, maintenance and repair.
 Foreword
RD254 wheeled tractor is one of series of leading products of Chery Heavy Industry Co., Ltd. This
model has the characteristics of compact structure, convenience in control, flexible steering, great
traction force, extensive use, convenience in maintenance, etc., can carry out various field works such
as ploughing, raking, sowing, harvesting, etc. together with corresponding agricultural implements
and can be used for transportation work and fixed power such as power generation, irrigation and
drainage, etc.
Along with the development of science and technology and use requirements, product structure will
be improved and perfected constantly. Except for amendments in republication, catalogue content
and actual structure may be slightly different without prior notice. User shall not make any
unjustifiable claim based on parts lists and parts illustrations in this catalogue. Please note.
Since inadequacies are inevitable because the content of this catalogue is too much, we sincerely hope
that the majority of users can put forward valuable opinions and suggestions for further improvement
and perfection.
Chery Heavy Industry Co., Ltd. has the copyright, amendment and explanation rights of the parts
catalogue. No entity or individual shall reprint, publish or duplicate this parts catalogue without the
consent of Chery Heavy Industry Co., Ltd.

Chery Heavy Industry Co., Ltd.

June, 2013
 Table of Contents
Applicable Model
RD254-A RD254-A
S/N Code Name Name and Specification of Part Page
RD254-LC1 RD254-LC1D1
H2J1MNP2-C H2J1MNP2-C
I D250.11C.001 Air cleaner assembly √ √ 1
2 D250.13C.001 Cooling system assembly √ √ 3
3 D304.20.001 Control mechanism assembly-1 √ √ 5
4 D304.20.001 Control mechanism assembly-2 √ √ 7
5 D250.212B Clutch control mechanism assembly √ √ 9
6 D250.22C Exhaust system assembly √ √ 11
7 D254.311G Front driving axle sub-assembly-1 √ √ 13
8 D254.311G Front driving axle sub-assembly-2.1 √ √ 15
9 D254.311G Front driving axle sub-assembly-2.2 √ √ 17
10 D254.311G Front driving axle sub-assembly-3.1 √ √ 19
11 D254.311G Front driving axle sub-assembly-3.2 √ √ 21
12 D254.311G Front driving axle sub-assembly-4.1 √ √ 23
13 D254.311G Front driving axle sub-assembly-4.2 √ √ 25
14 D254.311G Front driving axle sub-assembly-5 √ √ 27
15 D254.311G Front driving axle sub-assembly-6 √ √ 29
16 D254.312C Bracket assembly √ √ 31
17 D254.313G Front support assembly √ √ 33
18 D254.314G Rear support assembly √ √ 35
19 D254.32.001 Front wheel assembly √ √ 37
20 FD250.34B.001 Rear driving wheel assembly √ √ 39
21 FD250.35.001 Traction device assembly √ √ 41
22 D254.361B Shuttle gear shift assembly-1 √ √ 43
23 D254.361B Shuttle gear shift assembly-2 √ √ 47
Shuttle gear shift control mechanism
24 D250.362F √ √ 49
assembly
25 D254.371D Transmission assembly-1 √ √ 51
26 D254.371D Transmission assembly-2 √ √ 55
 Contents

Applicable Model

S/N Code Name Name and Specification of Part RD254-A RD254-A Page
RD254-LC1 RD254-LC1D1H2
H2J1MNP2-C J1MNP2-C
Rear countershaft assembly of
27 D250.372B √ √ 57
transmission-1
Rear countershaft assembly of
28 D250.372B √ √ 61
transmission-2
Transmission case control
29 D300.373 √ √ 63
mechanism assembly-1
Transmission case control
30 D300.373 √ √ 65
mechanism assembly-2
Transmission case control
31 D300.373 √ √ 69
mechanism assembly-3
32 FD250.37B.028 Right semiaxle assembly √ √ 71
33 FD250.37B.029 Left semiaxle assembly √ √ 73
Hydraulic steering system
34 D254.40.001 √ √ 75
assembly-1
Hydraulic steering system
35 D254.40.001 √ √ 77
assembly-2
Hydraulic steering system
36 D254.40.001 √ √ 79
assembly-3
37 D250.411B Power take-off shaft assembly √ √ 81
38 D250.412B Power take-off gear assembly √ 83
39 D250.412C Power take-off gear assembly √ 85
Power take-off control mechanism
40 D250.413C √ √ 87
assembly
41 D254.421B Transfer case assembly-1 √ √ 89
42 D254.421B Transfer case assembly-2.1 √ √ 91
43 D254.421B Transfer case assembly-2.2 √ √ 93
Transfer case driving shaft
44 D254.422A √ √ 95
assembly
Transfer case control mechanism
45 D254.423A √ √ 97
assembly
Brake control mechanism
46 FD250.43.001 √ √ 99
assembly-1
Brake control mechanism
47 FD250.43.001 √ √ 101
assembly-2
48 D250.44C Driver's seat installation assembly √ √ 103

49 D250.45C.001 Floor and mudguard assembly-1 √ √ 105

50 D250.45C.001 Floor and mudguard assembly-2 √ √ 107

51 D250.45C.001 Floor and mudguard assembly-3 √ √ 109

52 D250.46C.001 Safety frame assembly √ √ 111

 Contents

Applicable Model
Name and Specification of RD254-A RD254-A
S/N Code Name Page
Part RD254-LC1 RD254-LC1
H2J1MNP2-C D1H2J1MNP2-C
Engine hood installing
53 D250.47C.001 √ √ 113
assembly-1
Engine hood installing
54 D250.47C.001 √ √ 115
assembly-2
Electrical equipment
55 D250.48C.001 √ √ 117
installation drawing-1
Electrical equipment
56 D250.48C.001 √ √ 119
installation drawing-2
Electrical equipment
57 D250.48C.001 √ √ 121
installation drawing-3
Electrical equipment
58 D250.48C.001 √ √ 123
installation drawing-4
Electrical equipment
59 D250.48C.001 √ √ 125
installation drawing-5
Electrical equipment
60 D250.48C.001 √ √ 127
installation drawing-6
61 RC800.49.010 Tool box assembly √ √ 129
62 D300.50E Fuel tank assembly √ √ 131
63 D250.55 Lifter installing assembly-1 √ √ 133
64 D250.55 Lifter installing assembly-2 √ √ 135
65 FD250.57.001 Distributor assembly √ √ 141
66 D254.58A.001 Hydraulic system assembly-1 √ √ 145
67 D254.58A.001 Hydraulic system assembly-2 √ √ 147
Hitching mechanism
68 FD250.56.001 √ √ 149
assembly-1
Hitching mechanism
69 FD250.56.001 √ √ 151
assembly-2
70 D250B.80 Air brake pipe assembly √ √ 153
71 D250.74C.001 Front weights assembly √ √ 155
72 D250.91.001 Rear weights assembly √ √ 157
CHERY

D250.11C.010Air Cleaner Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250.11C.001Air Cleaner Assembly

Code and Specification
S/N Parts Name Quantity Remark
of Part
1 D250.11C.010 Air cleaner assembly 1
2 D250.11C.030 Air filter bracket welding
3 D250.11C.101 Air intake hose 1
4 D250.11C.102 Air intake pipe 1
Cloth-inserted
5 GB/T93 A-type combination washer 8 2
oil-resisting
6 GB/T93 Washer 8-A0P 2
hose
7 GB/T6170 Nut M8 2
HT200
8 GB/T5783 Bolt M8X25-A3L 2
9 Q67689 B-type worm drive hose clip 2
CHERY

D250.13C.001 Cooling System Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250.13C.001 Cooling System Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 GB/T 5783 Hexagonal head bolt M8x35 4
2 GB/T 93 Spring washer8 8
3 GB/T 97.1 Plain washer8 9
4 D250.13B.2 Radiator support welding-on unit 2
5 GB/T 96.1 Washer 8 5
6 Q67650 B-type worm drive hose clip 4
7 D250.13B-01 Water inlet hose 1
8 GB/T6172.1 Hexagon nut 6
9 D254.13.135 Rubber backing block 3
10 D250.13B.3 Radiator tie rod welding-on unit 1
11 D250.13B.1 Radiator assembly 1
12 D250.13B-02 Water outlet hose 1
13 GB/T 5783 Hexagonal head bolt M8x20 4
14 D250.13.101 Backing plate 1
15 D250.13C.126 Heat guard 1
16 D250.13.127 Block glue of heat guard 1
CHERY

D304.20.001Control Mechanism Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

D304.20.001Control Mechanism Assembly-1

Code and specification

S/N Parts Name Quantity Remark
of part
1 RC650.20.101 Pedal 1 Borrowed
2 GB/T879.1-2000 Pin 5X20 2
3 RC650.20.107 Rubber stopper 1 Borrowed
4 D250.20B.3 Pedal rocking arm welding-on unit 1
5 GB/T6170-2000 Nut M8-Zn.D 8
6 GB/T5781-2000 Bolt M8X45-Zn.D 1
7 GB/T818-2000 ScrewM8X20 6
8 D250.20B-01 Foot throttle pull bracket 1
9 GB/T93-1987 Washer 8
10 RC650.20.114 Hand throttle rocking arm 1 Borrowed
11 RC650.20.104 Torsion spring 1 Borrowed
Foot throttle rocking arm
12 FD300.20.011 1
Welding-on unit
13 GB/T97.1-2002 Washer 6-200HV 1
14 GB/T91-2000 Pin 2X12 2
15 FD700.20S.014 Foot throttle pull assembly 1
16 D250.20B-01 Foot throttle pull bracket 1
17 GB/T882-2000 Axis pin B5X20-Zn.D 1
CHERY

D304.20.001Control Mechanism Assembly-2

Hand throttle
rocking arm
 Parts Catalogue of RD254 Wheeled Tractor

D304.20.001Control Mechanism Assembly-2

Code and Specification of

S/N Parts Name Quantity Remark
Part
1 D300A.20.1 Hand throttle assembly 1
2 GB/T818-2000 Screw M8X20 6
3 RC300.20.105 Hand throttle pull bracket 1 Borrowed
4 GB/T93-1987 Washer 8 6
5 GB/T6170-2000 Nut M8-Zn.D 8
6 RC650.20.133 Fixing screw 1 Borrowed
7 FD250.20B.017 Engine stop pull assembly 1
CHERY

D250.212B Clutch Control Assembly

Clutch subassembly
 Parts Catalogue of RD254 Wheeled Tractor

D250.212B Clutch Control Assembly

S/N Code and Specification of part Parts Name Quantity Remark

D250.212B Clutch control mechanism assembly 1
1 GB/T 276-1994 Bearing 6203-2Z 1
2 GB/T 93 Washer10-A0P 6
3 GB/T 5783 Bolt M10X40-A2L 6
4 D250.212B-01 Release bearing 996711 1
5 FD200.21B.103 Release bearing seat 1
6 FD200.21.106 Return spring of release bearing seat 2
7 YB/T 5032-1993 Galvanized steel wireZd1.4x250 2
8 FD65.37.109 Check screw 2
9 FD200.21.105a Clutch fork 1
10 FD200.21.013a Clutch release rocking arm unit 1
11 FD800A.43B.116 Right screwing fork of link 1
12 GB/T6170 Nut M10-A3L 1
13 D250.212-01 Link 1
14 GB/T6172.1 Nut M12-A3L 1
15 GB/T 5783 Bolt M12X35-A3L 1
16 FD800A.43B.119 Left screw link/ fork 1
17 FD800A.43B.011 Positioning pin and rivet unit 2
18 D280.212.2-01 Clutch pedal assembly 1
18.1 D250.212B.1.1 Pedal shaft bushing 1
18.2 D250.212B.1.1 Clutch pedal welding-on unit 1
19 JB/T 7940.2 45°M10x1Pressured oil cup 1
20 D250.212-03 Clutch pedal spring 1
CHERY

D250.22C Exhaust System Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250.22C Exhaust System Assembly

Code and Specification of

S/N Parts Name Quantity Remark
Part
1 GB/T13681 Hexagon weld nut 6 2
2 D250.22C.1 Muffler nameplate 1 Stainless steel plate
t=0.8
3 D250.22C.010 Muffler assembly 1 t=0.8

4 D250.22C.031 Upper elbow 1 QT450-10

5 D250.22C.032 Lower elbow 1 QT450-10

Steel plate
6 D250.22C.301 Muffler junk ring 1
1.5/Q235A
Steel plate
7 D250.22C.302 Muffler fixing plate 1
5/Q235A
Sieve mesh plate
8 D250.22C.307 Exhaust pipe lower protection net 1
1/Q235A
Sieve mesh plate
9 D250.22C.306 Exhaust pipe upper protection net 1
1/Q235A
10 FD250.22.030 Combined sealing packing 2

11 FD250.22C.030 Combined sealing packing 1

12 GB/T5783 BoltM6x12 4

13 GB/T5783 BoltM8x16 6

14 GB/T5783 BoltM10x30 2

15 GB/T5783 BoltM10x40 6

16 SPL6177.1 Hexagon nut with flange 10 6

17 GB/T93 Washer 6 4

18 GB/T93 Washer 8 6

19 GB/T93 Washer 10 8

20 GB/T97.1 Washer 6 41

21 GB/T97.1 Washer 8 6

22 GB/T97.1 Washer 10 2

23 GB/T6170 NutM8-A3L 2
CHERY

D254.311G Front Driving Axle Sub-assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D254.311J.4 Left steering cross rod assembly 1
2 D254.311J.6 Cylinder shield welding-on unit(left) 1
3 D254.311G-03 Cylinder fixing seatII 1
4 GB/T6174 Nut M6-A2L 1
5 GB/T71 Screw M6x20 1
6 GB/T 93 Spring washer 10-A0P 20
7 GB/T35783 Bolt M10x25-A3L 8
8 D254.311G.4 Hydraulic cylinder assembly 1
9 D254.311G-02 Cylinder fixing seat 1
10 D254.311G-01 Cap of seat 1
11 D254.311J.5 Right steering cross rod assembly 1
12 GB/T 5783 Bolt M8x20-A2L 8
13 GB/T 93 Spring washer8-A0P 8
14 GB/T119.1 Cylindrical pin 6h8x14-A0P 4
15 D254.311J.1 Left drive assembly 1
16 GB/T119.1 Cylindrical pin 10h8x20-A0P 4
17 FD254.31F.123 Positioning sleeve 2
As
18 FD254.31F.124 Adjusting shim
required
19 JB/T3982 Washer 14 2
20 Q617B14 Hexagon screw plug 2
21 D254.311J.3 Reducing gearbox assembly 1
22 D254.311J.2 Right drive assembly 1
23 D254.311J-01 Limiting bolt 2
24 GB/T6171 Nut M10x1.25-A2L 12
Stud bolt
25 GB/T 899 12
AM10-M10x 1.25 x35-8.8-A2L
Cylinder shield welding-on unit
26 D254.311J.7 1
(right)
27 GB/T 97.1 Washer 14-A0P 12
28 GB/T6176 Nut M14x1.5-A3L 12
CHERY

D254.311G Front Driving Axle Sub-assembly-2.1

Main reduction gearbox

assembly
 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-2.1

Code and Specification of

S/N Parts Name Quantity Remark
Part
1 JB/T 7940.1 Oil cup M10x1 1
2 D254.311J.1-01 Left steering suport 1
3 FD254.31F.104 Slide shaft sleeve 35 x39x30 1
4 GB/T 3452.1 O ring 34.5 x3.55G 1
5 FD254.31F.105 Steering shaft seat 1
As
6 FD254.31F.102 Sealed shim
required
7 GB/T 5783 Bolt M10x25-A3L 7
8 GB/T 93 Washer10-A0P 7
9 GB/T 96.1 Big washer10-A0P 1
10 FD254.31F.106 Shim 1
11 GB/T 276 Bearing6210 1
12 FD254.31F.108 Bull wheel of semiaxle 1
13 D254.311J.1-03 Axis pin in end 1
14 D254.311J.1-02 Steering knuckle case 1
15 JB/T 3452.1 O ring 80x2.65G 1
16 FD254.31F.101 Pinion of semiaxle 1
17 GB/T 276 Bearing 6207 1
18 FD254.31F.113 Dust ring 1
19 GB/T 9877.1 Oil seal B507210D 1
20 FD254.31F.122 Slide shaft sleeve 50x55 x35 1
21 GB/T 301 Bearing 51106 1
22 FD254.31F.120 Left terminal case 1
23 FD254.31F.118 Pinion in end 1
24 GB/T 276 Bearing 6305 1
As
25 FD254.31F.117 Adjusting shim
required
26 FD254.31F.116 Cover on bottom 1
27 Q614B01 Squarehead tapered plug 1
28 GB/T 93 Washer 6 4
29 GB/T 5783 Bolt M6x20-A2L 4
CHERY

D254.311G Front Driving Axle Sub-assembly-2.2

Left steering
suport

Left end case

 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-2.2

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 GB/T6171 Nut M10X1.25-A2L 4
2 GB/T 93 Washer10-A0P 12
Stud bolt AM10-M10x 1.25
3 GB/T 899 4
x30-8.8-A2L
As
4 FD254.31F.107 Adjusting shim
required
5 GB/T 119.2 Pin B8X20-A0P 2
6 FD254.31F.175 Screw plug 1
7 FD254.31F.176 Washer 1
As
8 FD254.31F.114 Adjusting shim
required
As
9 FD254.31F.115 Adjusting shim
required
10 GB/T/276 Bearing 6206 1
11 FD254.31F.111a Front drive shaft 1
12 FD254.31F.113 Dust ring 1
13 GB/T 9877.1 Oil seal B507210D 1
14 FD254.31F.109 Cover in end 1
15 GB/T 276 Bearing 6307 1
16 FD254.31F.112a Steel wire circlip 2
17 FD254.31F.110a Bull wheel in end 1
18 FD254.31F.177 Knurl bolt 6
19 GB/T 5783 Bolt M10X30-A3L 8
20 FD254.31F.178 Positioning ring 1
CHERY

D254.311G Front Driving Axle Sub-assembly-3.1

Differential
support
 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-3.1

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D254.311J.3-01 Main reducing gearbox case 1
2 GB/T 93-12-A0P Washer 4
3 GB/T 5783 Bolt M12X30-A3L 4
4 GB/T 3452,1 O ring 63.0x3.55G 2
5 D254.311G.3-02 Front supporting shaft 1
As
6 FD254.31F.132 Adjusting shim
required
7 D254.311G.3-01 Differential support 1
8 GB/T 93 Washer 10-A0P 18
9 GB/T 5783 Bolt M10X30-A3L 16
10 FD254.31F.127 Input bevel gear shaft 1
11 GB/T 297 Bearing31306 1
12 GB/T 3452,1 O ring 73.0x3.55G 2
As
13 FD254.31F.131 Adjusting shim
required
14 FD254.31F.130 Rear supporting shaft 1
15 GB/T 297 Bearing 32006 1
16 GB/T 3452,1 O ring 23.6x2.65G 1
Oil seal
17 GB/T39877,1 1
FB35 x55 x8B
18 FD254.31F.128 Oil seal bushing 1
19 GB/T810 Small round nut M27X1.5 2
20 GB/T3858 Washer 27 1
21 GB/T370,1 ScrewM10x40 2
22 FD254.31F.152 Positioning sleeve 2
23 FD254.31F.139 Bearing fixing sleeve 1
24 FD254.31F.141 Check shim 1
25 GB/T35783 Bolt M8X16-A2L 1
CHERY

D254.311G Front Driving Axle Sub-assembly-3.2

Main
reduction
gearbox case

Bearing
fixing
sleeve
Differential
support
 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-3.2

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 FD254.31F.134 Adjusting shim 1
2 GB/T 297 Bearing32009 2
3 FD254.31F.135 Check shim 2
4 FD254.31F.144 Bevel bull wheel 1
5 FD254.31F.148 Plain washer 2
6 FD254.31F.143 Bull wheel of differential 2
7 FD254.31F.146 Spherical washer 2
8 FD254.31F.147 Planet gear 2
9 GB/T 119-1 Pin 8m6x40-A0P 1
10 GB/T 5783 Bolt M8X25-A2L 6
11 GB/T 119-2 Pin 8X20-A0P 1
12 FD254.31F.145 Axis pin of differential 1
13 FD254-31F-149 Differential case 1
14 FD254-31F-140 Adjusting nut 1
15 D254.311A.1.1 Ball type ventilating plug 1
16 FD304.42.118 Washer 1
17 Q617B12 Hexagon screw plug 1
18 D254.311J.3-02 Left semiaxle 1
19 GB/T 119-2 Pin 8X18-A0P 1
20 D254-311J-3-03 Right semiaxle 1
CHERY

D254.311G Front Driving Axle Sub-assembly-4.1

Main reduction
gearbox assembly
 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-4.1

Code and Specification of

S/N Parts Name Quantity Remark
Part
1 JB/T 7940.1 Oil cupM10x1 1
2 D254.311J.2-01 Right steering support 1
Slide shaft sleeve
3 FD254.31F.104 1
35 x39x30
4 JB/T 3452.1 O ring 34.5 x3.55G 1
5 FD254.31F.105 Steering shaft seat 1
6 FD254.31F.102 Sealed shim Group 1
7 GB/T 5783 Bolt M10x25-A3L 7
8 GB/T 93 Washer 10 7
9 GB/T 96.1 Washer10-A0P 1
10 FD254.31F.106 Shim 1
11 GB/T 276 Bearing6210 1
12 FD254.31F.108 Bull wheel of semiaxle 1
13 D254.311J.1-03 Axis pin in end 1
14 GB/T 276 Bearing6207 1
15 FD254.31F.101 Pinion of semiaxle 1
16 JB/T 3452.1 O ring 80x2.65G 1
17 D254.311J.1-02 Steering knuckle case 1
18 FD254.31F.113 Dust ring 1
19 GB/T 9877.1 Oil seal B507210D 1
20 FD254.31F.122 Slide shaft sleeve50x55 x35 1
21 GB/T 301 Bearing51106 1
22 FD254.31F.155 Right terminal case 1
23 FD254.31F.118 Pinion in end 1
24 GB/T 276 Bearing 6305 1
25 FD254.31F.117 Adjusting shim Group 1
26 Q614B01 Squarehead tapered plug 1
27 FD254.31F.116 Cover on bottom 1
28 GB/T 93 Washer 6 4
29 GB/T 5783 Bolt M6x20-A2L 4
CHERY

D254.311G Front Driving Axle Sub-assembly-4.2

Right
steering
support

Right
terminal case
 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-4.2

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 GB/T6171 Nut M10X1.25-A2L 4
2 GB/T 93 Washer 10 12
Stud bolt AM10-M10x 1.25
3 GB/T 899 4
x30-8.8-A2L
4 FD254.31F.107 Adjusting shim Group 2
5 GB/T 119.2 Pin B8X20-A0P 2
6 FD254.31F.175 Screw plug 1
7 FD254.31F.176 Washer 1
8 FD254.31F.114 Adjusting shim Group 1
9 FD254.31F.115 Adjusting shim Group 1
10 GB/T/276 Bearing6206 1
11 FD254.31F.110a Bull wheel in end 1
12 FD254.31F.112a Steel wire circlip 2
13 GB/T/276 Bearing6307 1
14 FD254.31F.109 Cover in end 1
15 GB/T 9877.1 Oil seal B507210D 2
16 FD254.31F.113 Dust ring 2
17 FD254.31F.111a Front drive shaft 1
18 GB/T 5783 Bolt M10X30-A3L 8
19 FD254.31F.177 Knurl bolt 6
20 FD254.31F.178 Positioning ring 1
CHERY

D254.311G Front Driving Axle Sub-assembly-5

 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-5

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D254.311J.4.1 Left rocking arm fitting assembly 1
1.1 GB/T 91 Split pin 3.2X40-A0P 1
1.2 GB/T 6178 Hexagon slotted nutM14-A3L 1
1.3 GB/T 97.1 Washer14-A0P 1
1.4 D254.311G.5.1.1 Dust boot assembly 1
1.5 D254.311J.4.1-01 Left steering rocking arm 1
1.6 D254.311G.5.1-03 Bowl type cover 1
1.7 D254.311G.5.1-04 Ball pin 1
1.8 D254.311G.5.1-02 bowl type seat 1
1.9 D254.311G.5.1-01 Top cover 1
As
required
D254.311G.5.1-05 Adjusting shim
As
1.10 D254.311G.5.1-07 Adjusting shim
required
D254.311G.5.1-08 Adjusting shim
As
required
1.11 GB/T 893.1 Check ring 30 1
2 GB/T 6173 Nut M18X1.5-A3L 1
3 D254.311G.5.2 Cylinder fitting assembly 1
3.1 Q671B20 Steel wire type spring clip 1
3.2 D254.311G.5.2-04 Seal sleeve of cylinder ball head 1
3.3 Q671B36 Steel wire type spring clip 1
3.4 JB/T 7940.1 Oil cupM6 1
3.5 D254.311G.5.2-01 Keyway of cylinder ball head 1
3.6 D254.311G.5.2-08 Oil cylinder ball pin cover II 1
3.7 D254.311G.5.2-03 Pin of cylinder ball head 1
3.8 D254.311G.5.2-07 Oil cylinder ball pin cover I 1
3.9 D254.311G.5.2-06 Washer 1
3.10 D254.311G.5.2-05 Connecting nut 1
CHERY

D254.311G Front Driving Axle Sub-assembly-6

 Parts Catalogue of RD254 Wheeled Tractor

D254.311G Front Driving Axle Sub-assembly-6

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D254.311G.5.2 Cylinder fitting assembly 1
1.1 D254.311G.5.2-05 Connecting nut 1
1.2 D254.311G.5.2-06 Washer 1
1.3 D254.311G.5.2-07 Oil cylinder ball pin cover I 1
1.4 D254.311G.5.2-03 Pin of cylinder ball head 1
1.5 D254.311G.5.2-08 Oil cylinder ball pin cover II 1
1.6 JB/T 7940.1 Oil cupM6 1
1.7 D254.311G.5.2-01 Keyway of cylinder ball head 1
1.8 Q671B36 Steel wire type spring clip 1
1.9 D254.311G.5.2-04 Seal sleeve of cylinder ball head 1
1.10 Q671B20 Steel wire type spring clip 1
2 GB/T 6173 Nut M18X1.5-A3L 1
3, D254.311J.5.1 Right rocking arm joint assembly 1
3.1 GB/T 91 Split pin 3.2X40-A0P 1
Hexagon slotted nut
3.2 GB/T 6178 1
M14-A3L
3.3 GB/T 97.1 Washer 14-A0P 1
3.4 D254.311G.5.1.1 Dust boot assembly 1
3.5 D254.311J.5.1-01 Right steering rocking arm 1
3.6 D254.311G.5.1-03 Bowl type cover 1
3.7 D254.311G.5.1-04 Ball pin 1
3.8 D254.311G.5.1-02 Bowl type seat 1
3.9 D254.311G.5.1-01 Top cover 1
As
required
D254.311G.5.1-05 Adjusting shim
As
3.10 D254.311G.5.1-07 Adjusting shim
required
D254.311G.5.1-08 Adjusting shim
As
required
3.11 GB/T 893.1 Snap ring 30 1
CHERY

D254.312C Bracket Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D254.312C Bracket Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
Battery installating bracket
1 D254.312C.2 1
welding-on unit
2 GB/T 5783 Bolt M12X35-A3L 18
3 GB/T 93 Washer12-A0P 18
4 D254.312G.1 Half frame welding-on unit 1
5 GB/T 119.2 Pin 0x27 4
6 GB/T 93 Washer16-A0P 4
7 GB/T 5783 Bolt M16x45-A3L 4
CHERY

D254.313G Front Support Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D254.313G Front Support Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
D254.313G Front support assembly 1
1 JB/T 7940.1 Oil cupM10x1 1
2 D254.313G-01 Front support 1
Slide shaft sleeve
3 FD254.31F.136 1
45x50x45
CHERY

D254.314GRear Support Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D254.314GRear Support Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
D254.314G Rear support assembly 1
1 GB/T 3452.1 O ring 54.5 x3.55G 1
2 JB/T 7940.1 Oil cupM10x1 1
Slide shaft sleeve
3 FD254.31F.129 1
70x75x40
4 D254.311B.1-01 Rear support 1
CHERY

D254.32.001 Front Wheel Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D254.32.001 Front Wheel Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D254.32.1 Rim welding-on unit 1
2 GB/T 2979 6.00-16Driving wheel tire cover 1
3 GB/T 2979 6.00-16Inner tire of driving wheel 1
4 FD250.31.205 Washer 6
5 GB/T6176 2 type nut M14X1.5-10-A3L 6
CHERY

FD250.34B.001Rear Driving Wheel Assembly

 Parts Catalogue of RD254 Wheeled Tractor

FD250.34B.001Rear Driving Wheel Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
FD250.34B.001 Rear driving wheel assembly 1
1 FD250.34B.010HAA Rear driving wheel combination 1
1.1 FD250.34B.010 Rim assembly 1
1.1.1 D300.34 丄 1-03 Rim bolt 6
1.1.2 D300.34 丄 1-05 Bolt seat of rim 1
1.1.3 FD250.34B.012 RimW7x24 1
1.1.4 D300.34 丄 1-04 Washer 6
I type hexagon nut
1.1.5 GB/T6171 6
M16x1.5-10-A3L
Inner tire of driving wheel
1.2 GB/T 2979 1
9.5-24
Outer cover of driving wheel
1.3 GB/T 2979 1
9.5-24
2 GB/T 5786 Bolt M14x1.5x35-10.9-A3L 6
3 FD250.34.108 Hub washer 10
4 GB/T36171 Nut M14X1.5-10-A3L 4
5 FD250.34.103 Driving wheel hub cover 1
6 FD250.34.102 Hub of driving wheel 1
7 D250.34B.2-01 Rim bolt 4
CHERY

FD250.35.001 Traction Device Assembly

 Parts Catalogue of RD254 Wheeled Tractor

FD250.35.001 Traction Device Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
Double ends stud bolt
1 GB/T 899 2
GM12-M12X35-A3L
Spring washer
2 GB/T 93 6
12-A0P
Hexagon nut
3 GB/T 6170 6
M12-A0P
4 RC65.53.103 Elastic lock pin 3
Cold-drawn
5 FD250.35.101 Connecting pin 1 round steel
11-30/45
6 FD250.35.010 Traction frame welding-on unit 1
Cold-drawn
7 FD250.35.103 Arresting pin 1 round steel
11-30/45
Hexagonal head bolt
8 GB/T 5782 2
M16X80-A3L
Spring washer
9 GB/T 93 2
16-A0P
Hexagon nut
10 GB/T6170 2
M16-A0P
Cold-drawn
11 FD250.35.105 Balance pin 1 round steel
11-42/45
Steel flat
12 FD250.35.104 Connection swing rod 1
25X60/65Mn
Steel flat
13 FD250.35.102 Swing rod 1
25X60/65 Mn
Double ends stud bolt
14 GB/T 899 4
GM12-M12X32-A3L
CHERY

D254.361B Shuttle-type Shifting Assembly -1

 Parts Catalogue of RD254 Wheeled Tractor

D254.361B Shuttle-type Shifting Assembly -1

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 GB/T 5783 BoltM8x25-A2L 6
2 GB/T 93 Washer8-AOP 9
3 D250.361D-02a Upper cover of shuttle gear shift 1
4 GB/T 3452.1 O-ring 13.2x2.65G 1
5 D250.361F-23 Shuttle-type shifting rocking arm 1
6 D250.361F-27 Shuttle-type shifting fork 1
7 D250.361D-19 Shuttle-type shifting fork shaft 1
8 GB/T 879.1 Pin 4x24 1
9 GB/T 879.1 Pin 6x24 1
10 FD250.37.148 Shifting fork shaft locking spring 1
11 GB-T 308 Steel ball 8.7312 G400b 1
12 D250.361F.1 Clutch pressed unit 1
12.1 FD250.36.102 Short bush of rocking arm 1
12.2 D250.361F.1-01a Clutch case 1
12.3 FD250.36.103 Long bush of rocking arm 1
12.4 FD250.36.104 Bush of pedal shaft 2
13 GB/97.1 Plain washer10-A0P 12
14 GB/T09300000 Washer 10-AOP 24
15 GB/T578200000 Bolt M10x55-A3L 4
17 FD250.36.110 Side cover of inspecting hole 1
18 GB/T09300000 Washer 14-AOP 4
19 D250.361F-17 BoltM14x20 4
20 GB/T9100000 Pin 4x20 A0P 1
21 GB/T5783 M10x25-A3L 12
22 D250.361F-04 Pressed cover of bearing 1
As
23 D250.361F-2100000 Adjusting shim
required
24 GB/T 276 Bearing6305 2
25 D250.361F-05 Spacing sleeve 1
26 D300.361-01 Gear of front drive 1
27 D250.361F-25 Spacer I 1
CHERY

D254.361B Shuttle-type Shifting Assembly -1 Continued

 Parts Catalogue of RD254 Wheeled Tractor

D254.361B Shuttle-type Shifting Assembly -1 Continued

Code and Specification

S/N Parts Name Quantity Remark
of Part
28 JB/T 7819 Needle bearingK30 35 27 1
29 D250.361F-09 Shuttle-type shifting driven dual gear 1
30 FT250.37.139 Short spacing collar 1
31 D250.361F-26 Spacer II 1
Shuttle-type shifting intermediate
32 D250.361F-12 1
shaft
33 D250.361F-22 Pressed cover of bearing 1
34 GB/T5783 Bolt M8x20-A2L 3
35 D250.361F-13 Splined sleeve 1
36 GB/T 893.1 Snap ring 18 1
CHERY

D254.361B Shuttle-type Shifting Assembly -2

 Parts Catalogue of RD254 Wheeled Tractor

D254.361B Shuttle-type Shifting Assembly -2

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 GB/T5783 M10x25-A3L 12
2 GB/T 93 Washer10-A0P 24
3 D250.361F-01 Support of release bearing seat 1
4 GB/T 9877.1 Oil seal FB35x55x8D 1
5 GB/T0276 Bearing 6207 2
Shuttle-type shifting driving shaft
6 D250.361F.2 1
assembly
6.1 D250.361F.2-01 Driving shaft of shuttle shift 1
6.2 GB/T 3452.1 O-ring 20.0x 1.80G 2
6.3 D250.361F.2-02 Bushing 1
As
7 D250.361F-29 Spacing collar of drive gear
required
As
7.1 D250.361F-33 Spacing collar of drive gear
required
As
7.2 D250.361F-34 Spacing collar of drive gear
required
As
7.3 D250.361F-35 Spacing collar of drive gear
required
8 D250.361D-05 Shuttle-type shifting driving gear 1
9 D250.361D-24 Engaging sleeve 1
10 D250.361D-10 Engaging gear seat 1
11 D250.361D-13 Needle spacer 1
12 QSF ZB019 Needle bearingK42 48 21 1
13 D250.361F-32 Driven gear bushing 1
14 D250.361D-09 Shuttle-type shifting driven gear 1
15 D250.361F-28 Driven gear spacing collar 1
16 D250.361F.3 PTO clutch shaft assembly 1
16'1 D250.361F.3-01 PTO clutch shaft 1
16'2 FD250.36B.128 Shaft sleeve 1
17 D250.361F-31 Idler spacer II 1
18 D250.361F-01 Shim 1
19 Q/SFZ B019 Needle bearing K20 26 24 1
20 D250.361F-10 Shuttle-type shifting idler 1
21 D250.361F-30 Idler spacer 1
22 D250.361F-14 Shuttle-type shifting idler shaft 1
CHERY

D250.362F Shuttle-type Shift Control Mechanism Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250.362F Shuttle-type Shift Control Mechanism Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
Shuttle gear shift control mechanism
D250.362F 1
1 assembly
D250.362D-04 1
Plastic handle
2 GB/T818 Screw M5x16-A2L 1
3 D250.362D.6 Shifting lever welding-on unit 1
4 D250.362D-01 Dust ring 1
5 GB/T 895.2 Round wire snap ring for shaft 18 1
6 D250.362F-05 Cylindrical pin 1
7 D250.362F-01 Shifting lever 1
8 GB/T 879.1 Spring cylindrical pin6x22 2
9 GB/T 879.1 Spring cylindrical pin4x22 2
10 D250.362D.2 Universal joint assembly 1
11 D250.362F.1 Lever welding-on unit 1
12 D250.362F-02 Guide seat 1
13 GB/T 894.1 Snap ring 12 2
14 GB/T 5783 Bolt 8X25-A2L 2
15 GB/T393 Washer8-A0P 2
16 GB/T6170 NutM8-A2L 2
17 D250.362G-02 Connecting yoke 1
18 GB/T36171 Nut M10X1-A3L 1
19 GB/T3882 Axis pin B8X25-A2L 2
20 GB/T 97.1 Washer 8-A0P 1
21 GB/T391 Split pin 3.2X20-A0P 2
22 D250.362F-04a Connecting yoke 1
23 D250.362F-03 Rocking arm 1
24 GB/T 879.1 Spring cylindrical pin4x28 1
25 GB/T 879.1 Spring cylindrical pin6x28 1
CHERY

D254.371D Transmission Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

D254.371D Transmission Assembly-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 FD250.37.011a Transmission case ssembly 1
1.1 FD250.37.101a Transmission case 1
1.2 GB/T 119.1 Pin 10m6x26-A0P 2
GB/T898 Stud bolt AM14-M14*1.5*35-A3L 4
2
GB/T898 Stud bolt AM14-M14*1.5*40-A3L 3
3 GB/T93 Washer14-AOP 7
4 GB/T6171 Nut M14*1.5-A3L 7
5 FD250.37A.272 Check ring 1
6 GB/T283 Cylindrical roller bearingNJ206E 1
7 FD250.37A.147 First shaft splitter spacing collar 1
8 JB/T7918 Needle bearingK30*35*27 2
9 FD250.37.146 Fixing gear on high and low shift 1
10 FD250.37.139 Short spacer 1
11 FD250.37.138 IV-speed driving gear snap ring 1
12 D300.371-08 IV-speed driving gear 1
13 Q/SFZ B019 Needle bearingK42*48*22 2
14 FD250.37.134 Gear sliding sleeve 2
15 D300.371-09 Engaging sleeve 1
16 FD250.37.135 Engaging gear seat 1
17 D300.371-07 III-speed driving gear 1
18 FD250.37.133 III-speed driving gear snap ring 1
19 GB/T894.1 Snap ring 34 2
20 GB/T93 Washer10-A0P 11
21 GB/T5783 Bolt M10*25-A31 11
22 D300.371-05 I-II-speed sliding gear 1
23 GB/T276 Annular ball bearing6207N 1
24 GB/T305 Check ring72/78.6 1
25 D250.371B-04 Front bearing cap of first shaft 1
26 D300.371.2 First shaft assembly 1
26.1 FD250.37A.137 Shaft sleeve 1
CHERY

D254.371D Transmission Case Assembly -1 Continued

 Parts Catalogue of RD254 Wheeled Tractor

D254.371D Transmission Case Assembly -1 Continued

Code and Specification

S/N Parts Name Quantity Remark
of Part
26.2 D300.371.2-01 First shaft 1
27 GB/T276 Annular ball bearing6007 1
28 GB/T893.1 Snap ring 62 1
CHERY

D254.371D Transmission Assembly-2

Transmission
case
 Parts Catalogue of RD254 Wheeled Tractor

D254.371D Transmission Assembly-2

Code and Specification of

S/N Parts Name Quantity Remark
Part
1 GB/T812 Round nutM27*1.5 2
2 GB/T858 Lock washer 27 1
3 GB/T297 Tapered roller bearing30206 2
4 FD250.37.121 Second shaft front bearing seat 1
5 GB/T5783 Bolt M10*25-A31 11
6 GB/T93 Washer10-A0P 11
7 FD250.37.122 Adjusting shim, second shaft
8 FD250.37.123 Adjusting shim, second shaft
9 FD250.37.110a Front thrust ring, second shaft 1
10 GB/T894.1 Snap ring 55 1
11 D300.371-03 II shift gear 1
12 D300.371-04 I shift gear 1
13 JB/T918 Needle bearingK32*37*27 2
14 GB/T1096 Key 14*9*56 1
15 D300.371-06a III-IV shift driven gear 1
16 FD250.37.105 a Long spacers 1
17 FD250.37.104a Rear thrust ring, second shaft 1
18 FD250.37.103a Sliding gear on high and low shift 1
19 GB/T894.1 Snap ring 38 1
Tapered roller bearing
20 D250.371C-02 1
UP38*75*23
21 D250.371B-01a Second shaft 1
22 RC800.38.020 Oil plug unit 1
Blanking cap on the hole of transfer
23 FD250.37.237 1
case
CHERY

D250.372B Rear Countershaft Assembly of Transmission-1

Transmission
case
 Parts Catalogue of RD254 Wheeled Tractor

D250.372B Rear Countershaft Assembly of Transmission-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
Rear countershaft assembly of
D250.372B 1
transmission
1 D250.372B.2 Right short semiaxle assembly 1
1.1 GB/T 5783 Bolt M10x25-A3L 4
1.2 GB/T 93 Washer10-A0P 4
1.3 FD250.37.208 Oil seal ring 1
1.4 FD250.37.122 Oil seal FB50x80x 12D 2
1.5 GB/T 893.1 Snap ring 80 1
1.6 GB/T 276-1994 Annular ball bearing6307 1
1.7 FD250.37.207 Bearing seat 1
1.8 GB/T 3452.1 O ring 103 x3.55G 1
1.9 GB/T 3452.1 O ring 28 x3.55G 1
1.10 D250.372B.1-01 Final drive gear on main shaft 1
As
2 FD250.37.204 Adjusting shim
required
As
3 FD250.37.205 Adjusting shim
required
As
4 FD250.37.206 Adjusting shim
required
5 FD250.37.013 Differential assembly 1
5.1 GB/T 6170 NutM8-A2L 2
5.2 FD250.37.201 Fixing screw 1
5.3 GB/T 297-1994 Conical roller bearing32011 2
5.4 FD250.37.203 Semiaxle gear shim 2
5.5 FD250.37.202 Semiaxle gear 2
5.6 FD250.37.199 Planet gear shim 2
5.7 FD250.37.200 Planet gear 2
5.8 FD250.37.198 Planetary gear shaft 1
5.9 FD250.37.196 Driven bevel gear 1
5.10, FD250.37.197 Differential case 1
5.11 FD250.37.195 Lock plate 5
5.12 GB/T 5786 Bolt M10x 1.25x25-A2L 10
6 D250.372B.1 Left short semiaxle assembly 1
6.1 GB/T 3452.1 O ring 103 x3.55G 1
CHERY

D250.372B Transmission Case Rear Central Assembly -1 Continued

Transmission
case
 Parts Catalogue of RD254 Wheeled Tractor

D250.372B Transmission Case Rear Central Assembly -1 Continued

Code and Specification

S/N Parts Name Quantity Remark
of Part
6.2 D250.372B.1-01 Final drive gear on main shaft 1
6.3 GB/T 3452.1 O ring 28 x3.55G 1
6.4 FD250.37.207 Bearing seat 1
6.5 GB/T 93 Washer10-A0P 4
6.6 GB/T5783 Bolt M10x25-A3L 4
6.7 GB/T4276-1994 Annular ball bearing6307 1
6.8 GB/T4893.1 Washer80 1
6.9 FD250.37.112 Oil seal FB50x80x12D 2
6.10 FD250.37.208 Oil seal ring 1
CHERY

D250.372B Rear Countershaft Assembly of Transmission-2

Transmission case

Transmission case
 Parts Catalogue of RD254 Wheeled Tractor

D250.372B Rear Countershaft Assembly of Transmission-2

Code and Specification

S/N Parts Name Quantity Remark
of Part
Rear countershaft assembly of
D250.372B 1
1 transmission
FD250.37.323 1
Ball headed bolt
2 GB/T6172.1 NutM10-A3L 1
3 GB/T 3452.1 O-ring15x2.65G 1
4 FD250.37.267 Differential fork shaft 1
1
5 FD250.41C.012 Differential control handle
6 GB/T6170 Nut M10-A3L 1
7 FD250.37.050 Differential control welding-on unit 1
8 GB/T 879.1 Pin3x22 1
9 GB/T 897.1 Pin5x22 1
2
10 FD250.37.322 Axis pin
11 GB/T 5783 BoltM10X25-A3L
12 GB/T 93 Washer 10-A0P 2
13 FD250.372B-03 Return spring
14 FD250.372B-04 Spring bracket 1
1
15 FD250.37.320 Fixing seat
16 FD250.37.262 Differential fork 1
17 FD250.37.263 Differential spring 1
18 FD250.37.232 Plug-in piece 1
19 D250.372B-01 Final drive driven gear 2
2
20 GB/T 858 Washer 52
21 GB/T2812 Nut M52X1.5 2
22 FD250.37.261 Right toothed 1
23 FD250.37.264 Locked screw 1
24 D250.372B.1-02 Mild steel wireSZ1.6x240 1
25 FD250.37.265 Left toothed 1
CHERY

D300.373 Transmission Case Control Mechanism Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

D300.373 Transmission Case Control Mechanism Assembly-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
Transmission case control
D300.373 1
1 mechanism assembly
GB/T 5783 4
Bolt M8X25-A3L
2 GB/T 93 Washer8-A0P 4
3 D250.371G.2.2A Stick shift 1
4 GB/T,6170 Nut M10-A3L 1
1
5 D250.373.1 Main stick shift assembly
5.1 FD250.37.180 Stick shift 1
5.2 GB/T 119.2 Pin 6x40-A0P 1
5.3 FD250.37.181 Stick shift sealed cover 1
5.4 FD250.37.248 Steel wire circlip 1
1
5.5 GB/T 894.1 Washer45
5.6 FD250.37.211 Main stick shift seat 1
5.7 FD250.37.183 Stick shift spring 1
5.8 FD300.37.164 Spring circlip of stick shift 1
5.9 D300.373.1-01 Guide plate of stick shift 1
2
5.10 GB/T 854 Washer 8
5.11 GB/T 5783 Bolt M8X16-A2L 2
6 D250.373B-03 Gearbox case 1
CHERY

D300.373 Transmission Case Control Mechanism Assembly-2

Gearbox case
 Parts Catalogue of RD254 Wheeled Tractor

D300.373 Transmission Case Control Mechanism Assembly-2

Code and Specification

S/N Parts Name Quantity Remark
of Part
Transmission case control
D300.373 1
mechanism assembly
1 FD250.37.037A Ranger selector 1
2 GB/T6170 Nut M10-A3L 1
3 FD250.37.020 Ranger selector welding-on unit 1
4 D250.373B.4 Pull rod welding (II) 1
5 GB/T 879,1 Pin 5x30 1
6 GB/T 5783 Bolt M8x16-A2L 1
7 GB/T393 Washer8-A0P 1
8 FD250.37.313 Pressure plate 1
9 GB/T 3452.1 O ring 15x2.65G 1
10 FD250.37.038 Ranger selector assembly 1
11 GB/T 5783 Bolt M10x40-A3L 2
12 GB/T 93 Washer 10-A0P 2
13 FD250.37.249 Fixing screw 1
14 GB/T6173 Nut M8x1-A1L 1
15 FD250.37.254 Interlock pressure seat 1
16 GB/T 3452.1 O ring 8.75 x 1.80G 1
17 D250.373B.5 Interlock shaft welding-on unit 1
18 FD250.37.250 Fixing pin 3
19 FD250.37.148 Shifting fork shaft locking spring 3
20 GB/T 308 Steel ball 8.731-G200-b 3
21 GB/T391 Pin3.2x20-A0P 1
22 GB/T 97.1 Washer8-A0P 1
23 FD250.43.103 Brake link adjusting fork 1
24 GB/T3882 Axis pinB8x28-A0P 1
25 GB/T36170 Nutm8-A2L 1
26 D250.373B.2 Pull rod welding (I) 1
27 GB/T391 Pin2.0x10-A0P 3
28 GB/T3882 Axis pinB6x20-A0P 3
29 D250.373B.3 Shaft sleeve welding-on unit 1
CHERY

D300.373 Transmission Case Control Mechanism Assembly-2Continued

Gearbox case
 Parts Catalogue of RD254 Wheeled Tractor

D300.373 Transmission Case Control Mechanism Assembly-2Continued

Code and Specification

S/N Parts Name Quantity Remark
of Part
30 GB/T 93 Washer12-A0P 1
31 D250.373B-04 Stud bolt 1
32 GB/T 848 Check ring 12-A0P 1
33 GB/T 894.1 Check ring 12 1
CHERY

D300.373 Transmission Case Control Mechanism Assembly-3

Gearbox case

Transmission case
 Parts Catalogue of RD254 Wheeled Tractor

D300.373 Transmission Case Control Mechanism Assembly-3

Code and Specification

S/N Parts Name Quantity Remark
of Part
Transmission case control mechanism
D300.373 1
assembly
1 GB/T 5783 Bolt M8X30-A3L 6
2 GB/T 93 Washer8-A0P 6
3 FD250.37.030 Oil gauge assembly 1
4 GB/T 879,1 Pin 3x24 4
5 GB/T 879,1 Pin 5x24 4
Shifting fork shaft for high and low
6 FD250.37.188 1
speed shifting fork
7 FD250.37.145 Shifter fork for high and low speed 1
8 D300.373-03 shift 1
9 FD250.37.143 III-IV-speed shifting fork 1
10 FD250,37,142 III-IV-speed shift 1
11 D300.373-02 I-II shift fork shaft 1
12 D300,373-01 I-II-speed shifting fork 1
CHERY

FD250.37B.028 Right Axle Shaft Assembly

 Parts Catalogue of RD254 Wheeled Tractor

FD250.37B.028 Right Axle Shaft Assembly

Code and Specification of

S/N Parts Name Quantity Remark
Part
Stud bolt
1 GB/T898 8
AM12-M12X1.25X35-10.9-A2L
2 GB/T93 Washer12-AOP 8
3 GB/T 6171 Nut M12X1.25-10-A3L 8
4 FD250.37B.217 Sleeve of right drive shaft 1
5 JB/T7940.1 Oil cupM10X1 1
6 GB/T 9877.1 Frame oil sealFB50X72X8F 3
7 GB/T/276///// Deep groove ball bearing 6210 1
8 FD250.37.214///// Bearing cap, drive shaft 1
9 FD250.37.216///// Washer 1
10 GB/T93 Washer 16-AOP 1
11 GB/T5783 Bolt M16X35-8.8-A3L 1
12 GB/T5783 Bolt M10X25-8.8-A3L 4
13 GB/T93 Washer 10-AOP 4
14 GB/T 893.1 Washer100 1
15 GB/T 276 Annular ball bearing6211 1
16 FD250.37.218///// Bearing snap ring 1
17 FD250.37B.212///// Drive shaft 1
18 GB/T 9877.1 Frame oil seal FB55X75X8F 1
19 FD250.37.242 Oil seal spacer ring 1
20 GB/T 3452.1 O-ring 112X3.55G 1
21 FD250.37.220 Key on flat 1
CHERY

FD250.37B.029 Left Axle Shaft Assembly

 Parts Catalogue of RD254 Wheeled Tractor

FD250.37B.029 Left Axle Shaft Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 GB/T5783 Bolt M10X25-8.8-A3L 4
2 GB/T93 Washer10-90P 4
3 JB/T7940.1 Oil cupM10X1 1
4 GB/T5783 Bolt M16X35-8.8-A3L 1
5 GB/T93 Washer16-A0P 1
6 FD250.37.216 Washer 1
7 FD250.37.214 Bearing cap, drive shaft 1
8 GB/T 9877.1 Frame oil sealFB50X75X8F
9 GB/T 276 Annular ball bearing6210 1
10 FD250.37B.226 Sleeve of left drive shaft 1
11 GB/T6171 nut M12X1.25-10-A2L 8
12 GB/T93 washer12-A0P 8
Stud bolt
13 GB/T898 8
M12-M12X1.25X35-10.9-A3L
14 GB/T 3452.1 O-ring 12X3.55G 1
15 FD250.37.242 Oil seal spacer ring 1
Frame oil seal
16 GB/T 9877.1 1
FB55X75X8F
17 FD250.37.215 key on flat 1
18 FD250.37B.212 Drive shaft 1
19 FD250.37.218 Bearing snap ring 1
20 GB/T 276 Annular ball bearing6211 1
21 GB/T 893.1 Washer100 1
CHERY

D254.40.001 Hydraulic Steering System Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

D254.40.001 Hydraulic Steering System Assembly-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
D254.40.001 Hydraulic steering system assembly 1
1 D250.401G Steering wheel assembly 1
2 FD220.40.301 Cover of steering rod 1
Hexagonal head bolt
3 GB/T 5783 4
M14X35-8.8-A3L
4 GB/T 93 Standard spring washer14-40P 4
5 D254.402A.6 Steering gear support welding-on unit 1
6 FD254.40.028 Hydraulic steering assembly 1
Standard spring washer
7 GB/T 93 4
10-A0P
Hexagonal head bolt
8 GB/T 5783 4
M10X30-8.8-A3L
9 D250.403B.1HAA Steering column assembly 1
CHERY

D254.40.001 Hydraulic Steering System Assembly-2

Hydraulic steering assembly

 Parts Catalogue of RD254 Wheeled Tractor

D254.40.001 Hydraulic Steering System Assembly-2

Code and Specification of

S/N Parts Name Quantity Remark
Part
Hydraulic steering system assembly
D254.40.001 1
1 Hollow bolt
RC800.40.101 3
M20X1.5
2 JB/T 982-1977 A type combined washer 20 12
3 FD254.40A.112 Hollow bolt (1) 2
Oil intaking steel pipe assembly,
4 D254.402C.3 1
steering gear
5 FD254.40A.114 Nipple pipe 2
Hexagonal head bolt
6 GB/T5783 2
M10X25-8.8-A3L
Washer
7 GB/T 93 2
10-A0P
Flow divider valve with steady one
8 FD254.40.030 1
way
Standard spring washer
9 GB/T 93 3
8-A0P
Hexagonal head bolt
10 GB/T 5782 3
M8x60-8.8-A2L
11 D254.402C.7 Oil return steel pipe welding-on unit 1
12 Q67627 B-type worm drive hose clip 2
13 D254.402C-01 Oil return hose 1
Flow divider valve bracket
14 D254.402A.7 1
welding-on unit
15 D254.402C.4 Oil return steel pipe assembly 1
16 Q67638 B-type worm drive hose clip 2
17 D254.402A-01 Oil return hose 1
18 D254.402A.11 Oil return steel pipe assembly 2 1
CHERY

D254.40.001Hydraulic Steering System Assembly-3

Hydraulic steering assembly

 Parts Catalogue of RD254 Wheeled Tractor

D254.40.001Hydraulic steering system assembly-3

Code and Specification

S/N Parts Name Quantity Remark
of Part
D254.40.001 Hydraulic steering system assembly 1
1 D254.402D.5 Left high pressure hose assembly 1
2 D254.402D.6 Right high pressure hose assembly 1
Hexagon nut
3 GB/T6173 2
M16x1.5-05-A3L
4 D254.402D-02 Oil pipe bracket 1
5 JB/T 982-1977 A type combined washer 20 2
6 D250.402A-05 Telescopic straight coupling 2
7 D254.402D.1 Left oil output steel pipe assembly 1
8 D254.402D.2 Right oil output pipe assembly 1
CHERY

D250.411B Power Take-off Shaft Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250.411B Power Take-off Shaft Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.411B Power take-off shaft assembly 1
As
1 D250.411B-02 Thrust piece circlip
required
As
D250.411B-03 Thrust piece circlip
required
As
D250.411B-04 Thrust piece circlip
required
2 FD250.41.131 Thrust piece 1
3 GB/T 276-1994 Deep groove ball bearing 6207 1
4 D250.411B-01 PTO shaft 1
Frame oil seal
5 GB/T 9877.1-1988 2
FB35 x55x8
6 FD250.41.133 Shim 1
7 FD250.41.104 Bearing cap, PTO shaft 1
Washer
8 GB/T393 3
10-A0P
Bolt
9 GB/T 5783 3
M10X25-A2L
10 RC300.41E.102 Guard of head of PTO shaft 1
CHERY

D250.412B Power Take-off Gear Assembly

PTO shaft
 Parts Catalogue of RD254 Wheeled Tractor

D250.412B Power Take-off Gear Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.412B Power take-off gear assembly 1
1 GB/T 276-1994 Deep groove ball bearing 6206 1
2 D250.412B-01 Power take-off transmission shaft 1
3 GB /T 276-1994 Deep groove ball bearing 6305 2
4 FD250.41.103 Bearing cap, drive shaft 1
5 GB/T 93 Washer10-A0P 3
6 GB/T 5783 Bolt M10X25-92L 3
7 FD250.41C.018 Protection cover welding 1
8 D250.412B-07 Needle bearingK26x30x28 1
9 D250.412B-05 PTO driven gear 1
10 D250.412B-06 PTO engaging gear seat 1
11 D250.412B-03 PTO engaging sleeve 1
12 D250.412B-04 Spacer sleeve 1
13 D250.412B-02 PTO driven gear 1
Needle bearing
14 GB7T 7918-1997 1
K35x40x27
CHERY

D250.412C Power Take-off Gear Assembly

PTO shaft
 Parts Catalogue of RD254 Wheeled Tractor

D250.412C Power Take-off Gear Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 GB/T 276-1994 Annular ball bearing6206 1
2 D250.412C-01 Power take-off transmission shaft 1
3 GB /T 276-1994 Annular ball bearing6305 2
4 FD250.41.103 Bearing cap, drive shaft 1 Borrowed
5 GB/T 93 Washer10-A0P 3
6 GB/T 5783 Bolt M10X25-A2L 3
7 D250.412B-07 Needle bearingK26X30X28 1 Borrowed
8 D250.412B-02 PTO driven gear 1 Borrowed
9 D250.412B-06 PTO engaging sleeve 1 Borrowed
10 D250.412B-03 PTO engaging sleeve 1 Borrowed
11 D250.412B-04 Spacer sleeve 1 Borrowed
12 D250.412C-02 PTO driven gear 1
Needle bearing
13 GB/T7918-1997 1
K35X40X27
CHERY

D250.413C Power Take-off Control Mechanism Assembly

Power take-off
transmission shaft

Transmission
case
 Parts Catalogue of RD254 Wheeled Tractor

D250.413C Power Take-off Control Mechanism Assembly

S/N Code and Specification of Part Parts Name Quantity Remark

Bolt
1 GB/T5781 2
M8X35-A2L
Washer
2 GB/T93 2
8-AOP
3 FD250.41.112 Posioning piece of release lever 2
Pin
4 GB/T879.1 2
3X24
Pin
5 GB/T879.1 2
5X24
6 RD250.41C.011 PTO release control lever 1
nut
7 GB/T6170 2
M10-A3L
8 FD250.41.012 Release lever and pin assembly 1
8.1 FD250.41.017 Release lever assembly
1
9 FD250.41.111 Spacer sleeve
Steel ball
10 GB/T308-1989 1
8.731 G200b
11 FD250.37.148 Shifting fork shaft locking spring 1
Power take-off shifting fork
12 RD250.413C-02
O ring 1
13 GB/T3452.1
11.8X1.80G
14 RD250.413C-01 PTO shifting fork shaft 1
15 FD250.41.016 Power take-off gear shift knob 1
Power take-off gear shift control lever
16 FD250.41.014 1
welding
17 FD250.41.013 Power take-off gear shift lever assembly 1
18 FD250.41.101 Splined sleeve 1
19 FD250.41.109 Fork head of PTO shaft 1
20 FD250.41.110 Power take-off shifting fork shaft 1
21 FD250.41.114 Spring of release lever 1
CHERY

D254.421B Transfer Case Assembly-1.

 Parts Catalogue of RD254 Wheeled Tractor

D254.421B Transfer Case Assembly-1.

Code and Specification

S/N Parts Name Quantity Remark
of Part
D254.421B Transfer case assembly 1
1 GB/T 119.1 Pin 10m6x18-A0P 2
2 D254.421B.1 Transfer case assembly 1
3 GB/I 3452.1 O-ring 53.0x2.65G 1
4 GB/T 5783 Bolt M10X30-10.9-A3L 4
5 GB/T 93 Spring washer10-A0P 4
CHERY

D254.421B Transfer Case Assembly-2.1.

 Parts Catalogue of RD254 Wheeled Tractor

D254.421B Transfer Case Assembly-2.1.

Code and Specification

S/N Parts Name Quantity Remark
of Part
D254.421B Transfer case assembly 1
1 D254.421B.1 Transfer case assembly 1
GB/T 5783 Bolt M10X20-A3L 3
2 GB/T 93 Spring washer10-A0P 6
3 D254.421A.1-04 Rear bearing cap 1
4 GB/T1276 Bearing6305 1
5 FD254.42.107 Rear thrust ring, output shaft 1
6 JB/T 7918 Needle bearingK25x31x20 2
7 FD254.42.108 Output shaft needle bearing spacer 1
8 D254.421B.1-01: Transfer case driven gear 1
9 FD254.42F.103 Engaging sleeve 1
10 D254.421A.1-02 Fork of transfer case 1
11 GB/T 879.1 Spring cylindrical pin6x24 1
Spring cylindrical pin
12 GB/T 879.1 1
3.5x24
13 D254.421A.1-03 Transfer case shifting fork shaft 1
14 GB/T 3452.1 O-ring 12.5x1.80G 2
15 FD254.42.121 Transfer case shifting block 2
16 Q617B12 Hexagon screw plug 1
17 JB/T 982 Washer 12 1
18 FD254.42.102 Output shaft 1
19 FD254.42.109 Front thrust ring, output shaft 1
20 GB/T 276-1994 Bearing 6206 1
21 D254.421.1.1 Oil seal FB30x45 x8B 1
22 D254.421A.1-09 Front bearing cap 1
23 GB/T 5783 Bolt M10X30-A3L 3
24 D254.421A.1-01 Transfer case housing 1
CHERY

D254.421B Transfer Case Assembly-2.2.

Transfer case
housing
 Parts Catalogue of RD254 Wheeled Tractor

D254.421B Transfer Case Assembly-2.2.

Code and Specification

S/N Parts Name Quantity Remark
of Part
D254.421B Transfer case assembly 1
D254.421B.1 Transfer case assembly 1
Bolt
1 GB/T 5783
M10X20-A3L
Spring washer
2 GB/T 93
10-A0P
3 D254.421A.1-07 Intermediate shaft locating plate 1
4 D254.421A.1-05 Counter shaft 1
5 GB/T 345.2 O-ring
6 D254.421A.1-11 Large thrust ring, counter shaft 1
Bearing
7 GB/T 276-1994
6204
8 D254.42B.1-02 Intermediate gear 1
9 GB/T 893.1 Circlip for hole 47 1
10 D254.421A.1-10 Small thrust ring, counter shaft 1
CHERY

D254.422ATransfer Case Driving Shaft Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D254.422ATransfer Case Driving Shaft Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
Transfer case transmission shaft
D254.422A 1
1 assembly
D254.422A.1 1
Transfer case driving shaft installation
1.1 GB/T 879.1 Spring cylindrical pin3.5x40 1
1.2 GB/T 879.1 Spring cylindrical pin6x40 1
1.3 FD254.42.113 Splined sleeve 1
1.4 D254.422A.1.2 Rear guard pipe welding-on unit 1
1.5 D254.422A.1-02 Transfer case transmission shaft 1
1.6 GB/T 879.1 Spring cylindrical pin3.5x35 1
1.7 GB/T 879.1 Spring cylindrical pin6x35 1
1.8 FD254.42F.120 Front splined hub 1
1.9 GB/T 3452.1 O-ring 45.0x3.55G 2
1.10 D254.422A.1.1 Front guard pipe welding-on unit 1
2 GB/T 93 Spring washer8-A0P 5
3 GB/T 5781 Bolt M8X16-A2L 5
CHERY

D254.423A Transfer Case Control Mechanism Assembly

Transfer case assembly

 Parts Catalogue of RD254 Wheeled Tractor

D254.423A Transfer Case Control Mechanism Assembly

Code and Specification Quantit

S/N Parts Name Remark
of Part y
Transfer case control mechanism
D254.423A 1
assembly
1 D254.423A-05 Positioning plate 1
2 GB/T 93 Washer8-A0P
3 GB/T 5783 Bolt M8x20-A2L
4 GB/T 308 Steel ball 8-G100-b 1
5 FD304.42.124 Positioning spring 1
6 D254.423A.1 Rocker arm assembly 1
6.1 FD304.42.135 Bush 1
6.2 D254.423A.1-01 Rocker arm 1
7 GB/T 879.1 Pin 3.5x24 1
8 GB/T 879.1 Pin 6x24 1
9 GB/T6170 Nut M10-A3L
Bolt
10 GB/T35783 1
M10x25-A3L
11 RC65.38.051 Pulling and pressing handle 1
12 D254.423A-01 Braiding rubber ring 1
13 D254.423A.3 Lever welding-on unit 1
14 GB/T91 Pin 2.0x20-A0P 1
15 GB/T 97.1 Washer 6-A0P 1
16 GB/T3882 Axis pinB6x22 1
17 D254.423A.2 Mid-rocker arm welding-on unit 1
17.1 D254.423A.2.1 Intermediate rocker arm welding 1
17.2 D254.423A.2-02 Mid-rocker arm bushing 1
18 GB/T391 Pin 3.2x20-A0P 1
19 GB/T 97.1 washer10-A0P 1
20 D254.423A.4 Mid-link welding-on unit 1
21 FD800A.43B.116 Right screwing fork of link 1
22 FD800A.43B.011 Positioning pin and rivet unit 1
CHERY

FD250.43.001 Brake Control Mechanism Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

FD250.43.001 Brake Control Mechanism Assembly-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
FD250.43.001 Brake control mechanism assembly 1
1 FD250.43.011 Brake assembly 2
1.1 GB/T6170 Nut M16-Zn.D 1
1.2 GB/T 93 Washer 16-Zn.D 1
1.3 FD250.43.121 Brake housing 1
1.4 FD250.43.012 Brake shoe assembly 1
1.4.1 GB/T 109 Rivet4x13 16
1.4.2 FD250.43.129 Friction lining 2
1.4.3 FD250.43.128 Brake shoe 1
1.5 FD250.43.122 Brake axis pin 1
1.6 GB/T 3452.1 O ring 15x2.65G 1
1.7 GB/T 97.1 Washer 8 1
1.8 GB/T 5783 Bolt M8x16-8.8-Zn.D 1
1.9 FD250.43.124 Brake cam 1
1.10 FD250.43.123 Return spring 2
2 GB/T25783 Bolt M8X25-8.8-A2L 4
3 GB/T 93 Washer8-A0P 4
4 GB/T25783 Bolt M12X30-8.8-A3L 2
5 FD250.43.104a Single shackle washer 2
6 FD250.43.101 Washer 2
7 FD250.43.105 Brake drum 2
CHERY

FD250.43.001 Brake Control Mechanism Assembly-2

Brake
assembly
Brake
assembly
 Parts Catalogue of RD254 Wheeled Tractor

FD250.43.001 Brake Control Mechanism Assembly-2

Code and Specification

S/N Parts Name Quantity Remark
of Part
FD250.43.001 Brake control mechanism assembly 1
1 FD250.43.102 Brake rocker arm 2
2 GB/T 93 Washer8-A0P 8
3 GB/T 5783 Bolt M8X25-8.8-A2L 6
4 GB/T291 Pin 3.2X16-A0P 4
5 GB/T 97.1 Washer 8-A0P 2
6 RC804.42.123 Front fork of link 2
7 GB/T6170 Nut M10-8-A3L 2
8 D250.433.3 Left brake pull rod welding 1
9 GB/T 882 Axis pin B8X30-A0P 2
10 D250.433-02 Left brake rocker shaft 1
11 D250.433-01 Brake pedal shaft 1
12 GB/T 879.1 Pin 8x40
13 D250.433.1 Left brake pedal assembly 1
13.1 FD65.43.132 Screw 1
13.2 D250.433.1.1 Left brake pedal welding-on unit 1
14 FD200.21.101 Return spring, clutch pedal
15 JB/T 7940.1 Oil cupM10x1 1
16 D250.433.4 Right brake pedal assembly 1
16.1 D250.433.2-02 Right brake pedal cover housing 1
16.2 D250.433.4.1 Right brake pedal welding-on unit 1
16.3 FD65.43.130 Interlock plate 1
16.4 FD65.43.132 Screw 1
17 FD250.43.112 Washer 1
18 GB/T 894.1 Washer25 1
19 D250.433.5 Right brake pull rod welding 1
20 GB/T 894.1 Washer 12 1
21 FD250.43.015 Brake locking plate assembly 1
22 FD250.43.157 Torsion spring 1
23 FD250.43.025 Fixing plate welding-on unit 1
24 GB/T25783 Bolt M8X20-8.8-A2L 2
25 GB/T 879.1 Pin 5x40 2
26 GB/T 97.1 Washer 12-A0P 2
CHERY

D250.44C Seat Installation Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250.44C Seat Installation Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D250.44C.011 Driver'seat assembly 1
Steel plate
2 D250.44C.103 Cover plate 1
5/Q235A
Hexagon socket slotted
3 GB/T2673-1986 4
screw
4 GB/T6170-2000 nutM8 4
Bolt
5 GB/T5781-2000 4
M8x25-A3L
6 GB/T93 Washer8 4
7 GB/T97.1-2000 Washer8 4
Steel plate
8 D250.44C.105 Seat bracket 1
4/Q235A
9 GB/T5781-2000 Bolt M10x30-A3L 2
10 GB/T93 Washer 10 2
11 GB/T97.1-2002 Washer 10 4
12 GB/T6170-2000 Nut M10 2
Special for Ningbo
13 RC800.62C.010 Seat belt mounting assembly 1
Songyuan Certification
CHERY

D250.45C.001 Floor and Mudguard Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

D250.45C.001 Floor And Mudguard Assembly-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.45C.001 Floor and mudguard assembly 1
1 GB/T5783-2000 Bolt M8X25-A3L 8
2 D250.45.163 Armrest 2
3 D250.45.045 Armrest washer unit 4
4 GB/T5781-2000 Bolt M8X20-A3L 8
16
5 GB/T93-1987 Washer8-A0P
6 D250.45C.036 Right mudguard welding-on unit 1
7 GB/T93-1987 Washer10-A0P 8
8 GB/T93-1987 Washer 10-A0P 8
9 GB/T93-1987 nut M10-A2L 4
10 GB/T93-1987 Bolt M10X25-A3L 4
11 D250.45C.030 Right floor welding-on unit 1
12 D250.45C.020 Left floor welding-on unit 1
Cold-drawn
13 D250.45C.129 U type bolt 4 round steel
13-14/45
14 D250.45C.035 Left mudguard welding-on unit 1
15 GB/T93-1987 Washer 14-A0P 8
16 GB/T93-1987 nut M14-A2L 16
17 D250.45B.103 Reinforced plate 1
18 GB/T6170-2000 nut M8-A2L 16
19 GB/T93-1987 Washer 8-A0P 16
20 D250.45A.104 Fixing plate of socket 1
CHERY

D250.45C.001 Floor and Mudguard Assembly-2

 Parts Catalogue of RD254 Wheeled Tractor

D250.45C.001 Floor and Mudguard Assembly-2

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D250.45.230 Blanking cap 1
2 D250.45.012A Instrument board assembly 1 Certification
D250.45.012 Instrument board assembly 1
3 GB/T 97.1 Washer5-A0P 6
4 GB/T 93 Washer5-A0P 6
5 GB/T818 Screw M5x10-A2L 8
CHERY

D250.45C.001 Floor and Mudguard Assembly-3

 Parts Catalogue of RD254 Wheeled Tractor

D250.45C.001 Floor and Mudguard Assembly-3

Code and Specification

S/N Parts Name Quantity Remark
of Part
Portal-type frame installation
D250.45.001 1
assembly
1 RC800.473.031A Rear view mirror assembly 2
2 GB/T 5783 Bolt M8X25-A2L 4
Rear view mirror support
3 D550.45P.036 2
welding-on unit
4 GB/T 93 Washer8-A0P 4
5 GB/T6170 NutM8-A2L 4
6 GB/T45783 Bolt M14X35-A3L 2
7 GB/T493 Washer14-A0P 4
8 D250.45.011B Portal-type frame welding-on unit 1
9 GB/T 5783 Bolt M14x60-A3L 2
CHERY

D250.46C.001 Safety Frame Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250.46C.001 Safety Frame Assembly

Code and Specification of

S/N Parts Name Quantity Remark
Part
Optional
1 D304.46.012 Ceiling 1
(borrowed)
2 GB/T5783-2000 Bolt M12X30-A3L 8
3 GB/T97.1-2002 Washer12-90P 40
4 GB/T93-1987 Washer12-A0P 26
5 GB/T6170-2000 Nut M12-A3L 26
Optional
6 D304.46.015 Ceiling left bracket welding 1
(borrowed)
Optional
7 D304.46.016 Ceiling right bracket welding 1
(borrowed)
Optional
8 D300.46.117 U type bolt 4
(borrowed)
Safety frame upper section
9 D250.46.012 1
welding
10 GB/T5782-2000 Bolt M12X90-A3L 6
11 D250.46C.014 Right lower pillar welding 1
12 D250.46C.013 Left lower pillar welding 1
13 GB/T5783-2000 Bolt M14X50-A3L 8
14 GB/T93-1987 Washer 14-A0P 8
15 GB/T6170-2000 Nut M14-A3L 8
16 D250.46C.131 U type bolt 2 Borrowed
CHERY

D250.47C.001 Engine Hood Installing Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

D250.47C.001 Engine hood Installing Assembly-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D250.47B.129 Horn mounting frame 1 Borrowed
Left mesh plate assembly behind Borrowed, no
2 D250.47X.020 1
lamp drawing
Right mesh plate assembly behind Borrowed, no
3 D250.47X.021 1
lamp drawing
Borrowed, no
4 D250.47.133 Left mesh plate 1
drawing
Borrowed, no
5 D250.47.134 Right mesh plate 1
drawing
6 D250.47C.012 Hood welding part 1
Borrowed, no
7 D250.47.230 Sealed strip, engine hood 1
drawing
Borrowed, no
8 D250.47X.015 Hood front grille assembly 1
drawing
Borrowed, no
9 D250.47.215 Rubber ring 1
drawing
Borrowed, no
10 D250.47.231 Hood sealing strip 2 1
drawing
11 GB/T818 Screw M5X16-A3L 26
12 GB/T 97.1 Washer5-70P 26
13 GB/T 93 Washer5-A0P 26
14 GB/T 6170 nutM5-A2L 26
CHERY

D250.47C.001.Engine Hood Installing Assembly-2

 Parts Catalogue of RD254 Wheeled Tractor

D250.47C.001.Engine Hood Installing Assembly-2

Code and Specification

S/N Parts Name Quantity Remark
of Part
Engine hood air spring installing
D250.47C.001 1
assembly
1 D250.47C.020 Air spring support 1
2 GB/T 882 Axis pin B8X20-A0P 2
3 GB/T91 Pin 3.2X16-A0P 2
4 D250.47.200 Engine hood air spring 1
CHERY

D250.48C.001 Electrical Equipment Installation Drawing-1

Generator
assembly

Starter assembly
 Parts Catalogue of RD254 Wheeled Tractor

D250.48C.001 Electrical Equipment Installation Drawing-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.481 Wiring harness of engine assembly 1
1 FD65.48.095 Wiring harness clip (1) 1
2 FD300.48.105 Wiring harness clip (3)
3 Q617B16 Hexagon screw plug 1
4 FD250.48.036 Engine oil pressure sensor 1
5 D250.481A.1 Engine wire harness assembly 1
6 D250.481.2 Coolant sensor 1
7 Q67407300 Plastic tightening belt 1
CHERY

D250.48C.001 Electrical Equipment Installation Drawing-1

To front lamp wire

harness

To left rear lamp

wire harness
assembly

To engine wire
harness

To right rear lamp

wire harness
assembly
 Parts Catalogue of RD254 Wheeled Tractor

D250.48C.001 Electrical Equipment Installation Drawing-2

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 D250.48C.1 Body wire harness 1
2 .67405100 Plastic tightening belt 2
3 GB/T 818 Screw M4X10-A2L 5
4 GB/T 93 Washer4-A0P 5
5 D400.484A.2 Oil level sensor 1
6 GB/T818 Screw M6x25-A2L 4
7 D250.482A-02 Relay box cover 1
8 D250.482A.2 Relay box assembly 1
9 GB/T 97.1 Washer 6-A0P 4
10 GB/T 93 Washer 6-A0P 4
11 GB/T6170 Nut M6-A2L 3
12 D354.482.5 Right plate switch 1
13 RC800.48.031 Ignition lock 1
14 GB/T 5783 Bolt M5x20-A2L 2
15 GB/T 93 Washer5-A0P 2
16 GB/T 97.1 Washer 5-A0P 2
17 JET141 Voltage regulator 1
18 FD250.48E.042 Fuse box assembly 1
19 D354.482.4 Left plate switch 1
20 RC300.48.055 Starting relay 1
CHERY

D250.48C.001 Electrical Equipment Installation Drawing-3

To body harness
assembly
 Parts Catalogue of RD254 Wheeled Tractor

D250.48C.001 Electrical Equipment Installation Drawing-3

Code and Specification
S/N Parts Name Quantity Remark
of Part
1 D250.483.1-1A Headlamp wire harness assembly 1
2 D250.47X.015.1 Front direction indicator assembly 1
3 D250.47X.015.2 Front combination light assembly 1
4 DL128 Horn assembly 1
CHERY

D250.48C.001 Electrical Equipment Installation Drawing-4

To body
harness
assembly

To body
harness
assembly
 Parts Catalogue of RD254 Wheeled Tractor

D250.48C.001 Electrical Equipment Installation Drawing-4

Code and Specification

S/N Parts Name Quantity Remark
of Part
Rear lamp wire assembly
1 D250.484A.1-1 1
2 FD250.48.101 Wiring harness clip 1
3 FD250.48.025 Rear working lamp assembly 1
4 GB/T 97.1 Washer8-A0P 3
5 GB/T 93 Washer8-A0P 3
6 GB/T45783 Bolt M8X16-A2L 1
7 GB/T4818 Screw M6x16-A2L 8
8 GB/T493 Washer 6-A0P 8
9 GB/T 97.1 Washer6-A0P 8
10 D250.48.053 Right tail lamp assembly 1
11 GB/T819.1 Screw M5x35-A1L 3
12 DJ101 Socket of trailer 1
13 GB/T 97.1 Washer 5-A0P 3
14 GB/T 93 Washer 5-A0P 3
15 GB/T 6170 NutM5-A2L 3
16 FD65.48.093 Braiding rubber ring (1) 1
17 Q67405100 Loose bandage 1
18 FD65.48.095 Wiring harness clip (1) 3
19 D250.48C.2 Left rear lamp wire harness assembly 1
20 D250.48.052 Left tail light assembly 1
21 GB/T6170 nut M8-A2L 2
22 FD300.48.033 Switch of brake lamp 2
23 FD250.48.134a Fixing support of brake switch 1
24 GB/T468 Screw M8X20-A2L 2
25 D250.48C.063 Safety switch bracket 1
CHERY

D250.48C.001 Electrical Equipment Installation Drawing-5

Battery installing bracket

welding-on unit
 Parts Catalogue of RD254 Wheeled Tractor

D250.48C.001 Electrical Equipment Installation Drawing-5

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.485 Battery installing assembly 1
1 Q67405100 Plastic tightening belt 1
2 FD65.48.095 Wiring harness clip (1) 1
3 FD250.48.027 Positive cable assembly 1
4 GB/T 5783 Bolt M8X25-A2L 2
5 D250.485A-01 Pressure plate 2
6 GB/T 97.1 Washer8-A0P 2
7 GB/T 93 Washer8-A0P 2
8 GB/T6170 NutM8-A2L 2
9 FD250.24B.103 Rubber 1
10 FD250.24B.010 Battery assembly 1
11 1204.485.4 Series power line (II) 1
CHERY

D250.48C.001 Electrical Equipment Installation Drawing-6

 Parts Catalogue of RD254 Wheeled Tractor

D250.48C.001 Electrical Equipment Installation Drawing-6

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.486 Instrument installing assembly 1
1 D250.487A.3 Oil pressure indicator 1
2 D250.487A.1a Water thermometer 1
3 D250.487A.2a Oil level gauge 1
4 D250.487A.4 Ammeter 1
5 FD250.48.035 Air pressure gauge 1
6 JK931 Direction indicator 1
CHERY

RC800.49.010 Tool Box Assembly

 Parts Catalogue of RD254 Wheeled Tractor

RC800.49.010Tool Box Assembly

Code and Specification of

S/N Parts Name Quantity Remark
Part
I RC800.49.010 Tool box assembly I
CHERY

D300.50E Fuel Tank Assembly

Fuel tank bracket welding

 Parts Catalogue of RD254 Wheeled Tractor

D300.50E Fuel Tank Assembly

Code and Specification Quantit

S/N Parts Name Remark
of Part y
D300.50E Fuel tank assembly 1
1 D300.50E.1 Fuel tank assembly 1
1.1 Cover of fuel tank 1
1.2 FD250.50.015a Mesh filter assembly 1
1.3 D300.50E.1.1 Fuel tank welding-on unit 1
1.4 JB/T 982 Combination sealed washer 14 1
1.5 FD250.50.107 Drain plug 1
2 FD300.50.112 Rubber backing block 2
3 FD65.50.106 Hollow bolt 1
4 JB/T 982 Combination sealed washer 14 2
5 FD250.50.023 Oil output pipe assembly 1
6 D300.50A.3 Sediment cup assembly 1
7 FD300.45.809 Press strip of top cover 1
8 D300.50.4 Steel belt welding-on unit 1
9 FD65.50.029a Rubber strip on the tank 2
10 D300.50-02 Rubber pad of tank 1
Hexagonal head bolt
11 GB/T 5783 2
M10X10-8.8-A3L
Standard spring washer
12 GB/T 93 4
10-A0P
13 D300.50.2A Fuel tank bracket welding 1
1 type hexagon nut
14 GB/T46170 4
M10-8-A3L
Hexagonal head bolt
15 GB/T45783 2
M10X20-8.8-A3L
CHERY

D250.55 Lifter Installing Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

D250.55 Lifter Installing Assembly-1

Code and Specification Quantit

S/N Parts Name Remark
of Part y
1 JB/T 982 Washer 12 1
2 D354.371-01 Fitting of ventilator 1
3 D250.55-01 Hose of ventilator 2
4 D250.55.1a Lifter assemby 1
5 GB/T 93 Spring washer10-A0P 10
6 GB/T 5783 Bolt M10X30-A3L 10
7 FD700.55D.147 Hollow bolt 1
8 JB/T/982///// Washer 8 2
9 FD700.55D.025///// Fitting assembly, oil pipe 1
10 Q67512 A-type worm drive hose clamp 4
11 RC800.55A.033 Breather assembly 2
12 GB/T 6170 NutM8 2
13 GB/T 93 Spring washer8-A0P 2
14 GB/T 97.1 Washer8-A0P 2
15 GB/T 5673 Bolt M8X20-A3L 2
16 D250.55.101 Breather bracket 2
CHERY

D250.55 Lifter Installing Assembly-2

 Parts Catalogue of RD254 Wheeled Tractor

D250.55 Lifter Installing Assembly-2

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.55 Lifter installing assembly 1
D250.55.1a Lifter assemby 1
1 GB/T 829 Pin 4x20 1
2 E300.55.140A Handwheel of lowering valve 1
3 300.55.138 Pin 1
4 FD250.55.128A Rod of adjusting valve 1
5 GB/T 1235 O-ring22x2.4 1
6 YT18.55.129 Adjusting valve M10x1x12 1
7 JB/T 1000 Hexagon plug 1
8 150D.55.227-2 Sealed ring 1
9 25.55.109A Hexagon plug 1
10 JB/T 982 Washer18 1
11 GB/T 93 Washer14
12 GB/T 5782 BoltM14x60
13 GB/T 828 ScrewM5x6x4 1
14 GB/T 97.1 Washer 5 1
15 YT18.55.152 Hexagon boltM14x38
16 D250.55.126 Cylinder head 1
17 D250.55.112 O-ring83x2.4 1
18 D250.55.200 Circlip for rectangle shaft 1
19 D250.55.102 Cylinder 1
20 GB/T 3452.1 O-ring60x5.3
21 220-1.55.130 Piston 1
22 220-1.55.161 Washer 1
23 25.55.207 Piston ball seat 1
24 GB/T 5783 BoltM8x20 17
25 GB/T293 Washer 8 16
26 YT18.55.115-1 Bottom plate of lifter housing 1
27 YT18.55.116-1 Paper gasket of bottom plate 1
28 D250.55.101 Lifter housing 1
CHERY

D250.55 Lifter Fitting Assembly-2 Continued

 Parts Catalogue of RD254 Wheeled Tractor

D250.55 Lifter Fitting Assembly-2 Continued

Code and Specification

S/N Parts Name Quantity Remark
of Part
29 JB/T 982 Combination sealing gasket20 2
30 FD65.55.117 Drain plug 2
31 D250.55.014 Left lifting arm Assembly 1
32 18.55.111 Check shim 1
33 18.55.109 Press plate of lifting shaft 1
34 GB/T 1234 O-ring12x1.9 2
35 D250.55.103 Oil pipe joint 1
36 D250.55.106 Dipstick pipe 1
37 GB/T 5783 BoltM8x25 4
38 18.55.159 Paper gasket, cap of rear end 1
39 18.55.141 Arresting pin 1
40 FD250.55.140 Rear end cover 1
41 GB/T 97.1 Plain washer20 1
42 18.55.108 Drain plug 1
43 GB/T 93 Washer10 8
44 GB/T15782 BoltM10x45 8
45 150.31.105 Spring lock pin 1
46 18.55.107 Connecting pin, front of upper link 1
47 150.55.164 Nipple joint 1
48 150.55.138-3 Ventilation plug 1
49 18.55.104 Shim 1
50 18.55.136 Core cover of oil charging 1
51 D250.55.2 Oil charging pipe 1
52 GB/T 3452.1 O-ring30x2.65 1
53 D250.55.105 Oil gauge pressed unit 1
54 GB/T 5781 Bolt M6x16 1
55 GB/T 97.1 Washer 6 1
56 YT18.54.120 Down cap of mesh filter 1
57 YT18.54.118-1 Input pipe 1
58 YT18.54.122 Oil intaking mesh filter 1
CHERY

D250.55 Lifter Fitting Assembly-2 Continued

 Parts Catalogue of RD254 Wheeled Tractor

D250.55 Lifter Fitting Assembly-2 Continued

Code and Specification

S/N Parts Name Quantity Remark
of Part
59 YT18.54.123 Frame of mesh filter 1
60 YT18.54.119 Filter screen upper cover 1
61 YT18.54.124 Filter screen joint piece 1
62 FD254.58.138 Cover of filter 1
63 FD254.58.140 Thread protector, input port 1
Paper gasket, joint of oil intaking
64 YT18.54.125 1
pipe
65 YT18.54.121 Sealed shim 1
66 GB/T 3452.1 O-ring 20x2.65 1
67 D250.55.109 Lifting shaft 1
68 18.55.133-1 Inner lifting arm 1
69 GB/T91 Pin 2x12 1
70 GB/T 97.1-6 Plain washer 1
71 GB/T 882 Axis pinB6x50 1
72 D250.55.114 Shaft sleeve 1
73 D250.55.113 Shaft sleeve 2
74 D250.55.111 Lifting shaft sleeve 2
75 D250.55.110 O-ring43.3x4.7 2
76 18.55.132 Knock-pin of piston 1
77 D250.55.013 Right lifting arm assembly 1
78 GB/T 97.1 Plain washer12 1
79 18.55.145 Return baffle 1
80 GB/T 97.1 Plain washer8 1
81 GB/T591 Split pin2x16 3
82 14.55.108A Adjusting rod 1
83 GB/T6170 Nut M8 3
84 18.55.110 Stop block 1
85 14.55.107 Limiting axis pin 1
CHERY

FD250.57.001 Distributor Assembly

 Parts Catalogue of RD254 Wheeled Tractor

FD250.57.001 Distributor Assembly

Code and Specification of

S/N Parts Name Quantity Remark
Part
FD250.57.001 Distributor assembly 1
1 FD250.57.010 Slide valve assembly 1
1.1 GB/T 894.1 Washer15 1
1.2 FD250.57.115 Spring catch
1.3 FD250.57.114 Return spring of slide valve 1
1.4 FD250.57.113 Sliding valve 1
2 FD250.57.128 Pressed screw plug 1
3 FD250.57.110 Adjusting shim 1
4 FD250.57.111 Adjusting shim 1
5 FD250.57.112 Adjusting shim 1
6 FD250.57.129 Spring of safe valve 1
7 FD250.57.131 Core of safe valve 1
8 FD250.57.101 Seat of of safe valve 1
9 GB/T 3452.1 O ring 9x2.65G 1
10 GB/T 3452.1 O ring 15x2.65G 1
11 GB/T 3452.1 O ring 13.2x2.65G 1
12 GB/T 3452.1 O ring 19x2.65G 1
13 JB/ZQ 4447 Screw plugZ1/8 1
14 FD250.57.104 Distributor case 1
15 FD250.57.103 Paper gasket of front cap 1
16 FD250.57.102 Front cover 1
17 GB/T 93 Washer 5
18 GB/T 5781 BoltM5x16
19 FD250.57.123 Scre plug 1
20 FD250.57.124 Shim 1
21 FD250.57.122 Positioning spring 1
22 FD250.57.121 Locating spring seat 1
23 GB/T2308 Steel ball $5.000G100b 1
24 GB/T25780 BoltM6x55 4
25 GB/T293 Washer 6 4
CHERY

FD250.57.001 Distributor Assembly Continued

 Parts Catalogue of RD254 Wheeled Tractor

FD250.57.001 Distributor Assembly Continued

S/N Code and Specification of Part Parts Name Quantity Remark

26 FD250.57.108 Rear cover 1
27 FD250.57.107 Rear cover paper pad 1
28 GB/T 68 ScrewM4x10
29 FD250.57.106 Baffle 1
30 FD250.57.105 Baffle paper pad 1
31 FD250.57.119 Locating block 1
32 GB/T 896 Washer4 1
33 GB/T 879 Pin 4x22 1
34 FD250.57.109 Handle shaft 1
35 GB/T 3452.1 O ring 9.5x2.65G 1
36 FD250.57.011 Handle assembly 1
37 FD250.57.120 Shifting pin 1
CHERY

D254.58A.001 Hydraulic System Assembly -1

 Parts Catalogue of RD254 Wheeled Tractor

D254.58A.001 Hydraulic System Assembly -1

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 FD254.58.132 Hollow bolt M24\U+00D71.5x38 1 Borrowed
2 JB/T982-1977 A-type combination washer24 2
3 D254.581B.2a Pressure oil pipe assembly 1 Borrowed
4 RC800.40.101 Hollow boltM20X1.5X40 1 Borrowed
5 JB/T982 A-type combination washer20
6 D254.582F.1 Oil input pipe assembly 1 Borrowed
7 FD254.58.010 CBJ30-E14L Gear pump 1 Borrowed
8 GB/T5783 Bolt M8\U?00D725-A3L
9 GB/T93 Washer8-A0P
10 FD254.58.136 Front-mounted fitting of pump pipe 1 Borrowed
Oil suction pipe assembly of oil Borrowed
11 D254.581F.1 1
pump
12 RC804.58A.112 Telescopic straight coupling 6 Borrowed
13 JB/T982 A-type combination washer 18 6
14 D250.581C.3 Unit of pipe clip and rubber pad 4 Borrowed
15 GB/T5783-2000 Bolt M6X30-Zn.D 2
16 GB/T6170-2000 nut M6-Zn.D 2
17 GB/T93-1987 Washer6-Zn.D 2
18 Q67638 B-type worm drive hose clip 2
19 FD400.58A.102 Fuel suction hose 1 Borrowed
20 RC700.58A.101 Straight thread connector – body 1 Borrowed
21 D250.582.1 Oil suction pipe assembly 1 Borrowed
Multiway valve oil inlet pipe Borrowed
22 D254.58A.029A 1
assembly
23 RC300.58.101 Hollow boltM22x1.5x46 1 Borrowed
24 JB/T982 A-type combination washer22 7
25 GBT3452.1 O ring 21.2A1.80G 1
CHERY

D254.58A.001 Hydraulic System Assembly-2

 Parts Catalogue of RD254 Wheeled Tractor

D254.58A.001 Hydraulic System Assembly -2

Code and Specification of

S/N Parts Name Quantity Remark
Part
1 RC800.58A.080 Quick-change connector assembly 4 Borrowed
Hydraulic output joint (English Borrowed,
RC800.58A.056 4
system) optional
2 RC800.58A.301 Oil pipe joint 4 Borrowed
Borrowed,
RC654.58B.101b Oil pipe joint (English system) 4
optional
3 JB/T982 A-type combination washer22 7
4 GB/T6173 Hexagon nutM27x2-A0P 4
5 D250.58A.035A Hydraulic output bracket welding 1
Multiway valve oil return pipe
6 D254.58A.030A 1
assembly
7 RC804.58A.112 Telescopic straight coupling 6 Borrowed
8 JB/T982 A-type combination washer 18 6
9 GB/T5783 Bolt M8x20-A3L 4
10 GB/T97.1 Washer8-A0P 4
11 GB/T6170 NutM8-A0P 4
12 GB/T93 Washer 8-A0P 7
13 D250.58A.027 Multiway valve bracket welding 1
14 CD22-20 Straight connector – body 1 Borrowed
15 D254.58A.028 Multiway valve assembly 1
16 GB/T91 Split pin 1.6x16-A0P 4
17 GB/T97.1 Washer 4 4
18 GB/T882 Axis pin 4x16-A3L 4
Steel flat
19 D254.58A.108 Multiway valve control rod 2
5x20/Q235A
20 RC800.58A.064 Handle head assembly 2 Borrowed
Multiway valve output oil pipe
21 D254.58A.031A 1
assembly 1
Multiway valve output oil pipe
22 D254.58A.034A 1
assembly 4
Multiway valve output oil pipe
23 D254.58A.033A 1
assembly 3
Multiway valve output oil pipe
24 D254.58A.032A 1
assembly 2
25 GB/T5783 Bolt M10x45-A3L 1
26 GB/T97.1 Washer 10-A0P 3
27 GB/T93 Washer 10 3
28 GB/T6170 Nut M10-A0P 3
29 GB/T5783 Bolt M10x35-A3L 2
CHERY

FD250.56.001 Hitching Mechanism Assembly-1

 Parts Catalogue of RD254 Wheeled Tractor

FD250.56.001 Hitching Mechanism Assembly-1

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.56 Hitching mechanism assembly 1
1 GB/T91 Pin 4x28-A0P 6
2 GB/T 97.1 Washer16-A0P 6
3 FD250.56.104 Down connecting pin of lifting bar 2
4 FD250.56.011 Lifting rod assembly 2
5 FD250.56.101a Upper connecting pin of lifting bar 2
6 GB/T6178 Nut M16-A3L 2
7 FD250.56.106 Connecting pin of spacing link 2
Right spacing link support
8 FD250.56.015 1
welding-on unit
9 GB/T 93 Washer14-A0P 8
10 GB/T 5783 Bolt M14x35-A3L 8
11 FD250.56.103 Sleeve 2
12 FD250.56.016a Limiting rod assembly 2
13 GB/T1882 Axis pin B16x55-A0P 2
14 GB/T91 Pin 5x32-A0P 2
15 FD250.56.138a Rear connecting pin of limiting rod 2
16 FD250.56.013 Lower pull rod assembly 2
17 FD250.56.139a Round plate 2
18 GB/T6178 Nut M14-A3L 2
19 GB/T191 Cotter pin 3.2x28-A0P 2
20 FD250.56.102 Lower pull rod fixing shaft 1
21 GB/T6172.1 Nut M12-A3L 1
22 FD250.56.125 Check screw 1
Left spacing link support welding-on
23 FD250.56.018 1
unit
24 GB/T91 Pin 4x36-A0P 2
CHERY

FD250.56.001 Hitching Mechanism Assembly-2

 Parts Catalogue of RD254 Wheeled Tractor

FD250.56.001 Hitching Mechanism Assembly-2

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.56 Hitching mechanism assembly 1
1 GB/T 5783 Bolt M8x16-A2L 2
2 GB/T 93 Spring washer8-A0P 2
3 D300.56.6 Upper pull rod fixing clip assembly 1
3.1 D300.56.6-02 Upper pull rod fixing clip 1
3.2 D300.56.6-01 Fixing seat 1
3.3 D300.56.6-03 Nylon bush 1
3.4 GB/T 96.1 Big washer6-A0P 1
3.5 GB/T 91 Split pin 2x14-A0P 1
4 GB/T 6170 Nut8-A2L
5 FD250.56.012a Upper pull rod assembly 1
Upper pull rod front adjusting rod
5.1 FD250.56.017 1
assembly
5.2 GB/T 6171 Nut M22x1.5-A3L 1
5$3 FD250.56.031 Adjusting screw pipe welding-on unit 1
5$4 GB/T6171 Nut M22x1.5LH-A3L 1
Upper pull rod rear adjusting rod
5$5 FD250.56.019 1
assembly
5.6 FD300.56A.113 Lock pin chain assembly 1
5.7 JB/T 7940.1 Oil cupM6 1
6 FD250.56.011 Lifting rod assembly 1
6.1 JB/T 7940.1 Oil cupM6 1
6.2 FD250.56.107a Lifting rod upper connecting fork 1
6$3 D250.56.1-02 Trapezoidal nutTr18x2 1
6$4 FD250.56.022a Screw pipe assembly of lifting bar 1
6$5 FD250.56.108a Down towing yoke of lifting bar 1
7 FD250.56.016a Limiting rod assembly 1
7$1 FD250.56.023B Telescopic bar assembly 1
7$2 FD250.56.021 Lock pin assembly, spacing link 1
7$3 FD250.56.025C Spacing collar welding-on unit 1
7$4 GB/T6170 1 type hexagon nutM22-8-A9L 1
7$5 FD250.56.134B Adjusting screw 1
CHERY

D250B.80 Air Brake Pipe Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250B.80 Air Brake Pipe Assembly

Code and Specification of

S/N Parts Name Quantity Remark
Part
D250B.80 Air brake pipe assembly 1
1 GB/T 5783-2000 BoltM8x20 5
2 FD300.80.034 Safety valve assembly 1
3 FD250.80.033 Drain valve assembly 1
4 D250B.80.6 Air receiver welding-on unit 1
Air pressure gauge connecting pipe
5 FD250.80.019 1
assembly
6 D250B.80-01 Clip 1
7 GB/T 93-1987 Washer 8 5
8 GB/T6170 NutM8 5
9 FD250.80.142 Pipe clip I 1
Nipple connection welding-on unit,
10 D250B.80.5 1
trailer
11 FD65.50.106 Hollow bolt 1
12 JB/T 982 Combination sealed washer 14 2
13 GB/T70.3 ScrewM10x30 2
14 FD250.80.024 Air brake valve assembly 1
15 GB/T882 Axis pinB10x30 1
16 GB/T91 Pin 2.5x25 1
17 FD300.80.105 Adjusting fork 1
18 GB/T6170 Nut M10 3
19 FD250.80.101 Connecting rod 1
20 GB/T 97.1 Washer 10 2
21 GB/T 93 Washer 10 2
22 D250.80.3a Air brake hose unit 1
23 FD250.80.143 Mounting clip n 1
24 D250B.80.2a Connecting pipe welding 1
Air outlet welding-0n unit, air
25 D250B.80.1 1
compressor
CHERY

D250.74C.001 Front Balance Weight Assembly

 Parts Catalogue of RD254 Wheeled Tractor

D250.74C.001 Front Balance Weight Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
1 FD250.74.102 Fixing bolt of weights 1
2 CB/T 97.1 Washer12-A0P 2
3 D250.74C.103 Counterweight block 6
4 GB/T 93 Washer12-A0P 1
5 GB/T6170 Nut M12-A3L 1
CHERY

D250.91.001 Rear Weights Assembly

Rear wheel rim

 Parts Catalogue of RD254 Wheeled Tractor

D250.91.001 Rear Weights Assembly

Code and Specification

S/N Parts Name Quantity Remark
of Part
D250.91.001 Rear weights assembly 1
Hexagonal head bolt
1 GB/T 5786 3
M16x1.5x35-8.8-A3L
2 RC800.34.108 Big washer 6
3 D250.34.201 Rear counterweight 2
4 D250.91B.103 Screw of weights 3
5 D250.91B.102 Counterweight screw I 3
1 type hexagon nut
6 GB/T 6171-2000 3
M16X1.5
CHERY

Parts Catalogue of RD254 Wheeled Tractor

Prepared by Chery Heavy Industry Co., Ltd.
Internal materials Keep carefully!
Format: 880xl2301A6 Number: RD254LJ-00.1
1st Edition of 2013; first printed in June 2013