Sound CBSE Class 9 Science

Revision Notes Chapter 12

• Sound energy is a form of energy because of which our ears are able to hear
something.

• One cannot create sound or destroy it. But one can transform one form of
energy into sound energy. For instance, when a cell phone rings, the sound is
produced by converting electrical energy into sound energy.

How is a sound produced?

A sound is produced when an object vibrates, that is they move in a ‘ to-and-fro’ motion.
For instance,

• When we strike a tuning fork or a stretched rubber band, it vibrates and

produces sound.

• The human voice is produced because of the vibration of the vocal cords.

• String instruments produce sound as their strings vibrate.

• When a bird flaps its wings a sound is produced.

• A flute produces sound because the air column of the flute vibrates as air
passes through it.

How does sound travel?

• In order to propagate, sound requires a medium through which it can travel.
This medium could be a gas, liquid or solid.
• Sound propagates in a medium as the particles of the medium vibrate from a
starting point. This means that sound always has a starting point and an ending
point.

• For instance, while you talk to a friend, as you speak, the particles in the air
get displaced due to the pressure caused by the sound you produce. They then
displace the adjacent particles and so on. In this way, sound travels from your
place to your friend’s ears.

• Therefore, we can say that the particles of a medium do not travel from one
point one another in order to propagate sound. Sound propagates because of
the disturbance caused by a source of sound in the medium.
 Sound travels through a medium
What is a wave?
• A wave is a disturbance produced in a medium as the particles of the medium
vibrate.
• The particles produce motion in each other without moving forward or
backwards.
• This leads to the propagation of sound.
• Hence sound is often called a Wave.
How can sound travel through air?
• When an object vibrates in the air or produces a sound, some regions of high
pressure are created in front of it. These are called the Regions of
Compression. These regions of compression move forward in the medium as
particles exert pressure on their adjacent particles.
• WIth alternate regions of compression, there are also regions of low pressure
that are in its front. Thes are called Regions of Rarefaction.
• As the object would move forwards and backwards consecutively producing
sound, the series of compressions and rarefactions will be created. This will
allow sound to move through air or any other medium as well.

• If the medium is dense the pressure exerted on the particles will be more in
order to propagate the sound and vice versa.

• Therefore, we can also say that propagation of sound is all about change in the
pressure of the medium.
 Sound wave causing compression (C) and refraction (R)
What are mechanical waves?
A wave that is produced when objects of the medium oscillate is called Mechanical
Wave. The sound waves are therefore, mechanical waves.

Types of Waves
• Sound cannot travel through the vacuum as it always needs a medium to
propagate. The vacuum contains no air hence no particles can propagate
sound.

Longitudinal waves - Any wave that vibrates in the direction of the motion is called
a Longitudinal Wave. Sound waves are longitudinal because the particles of the medium
vibrate in the direction which is parallel to the direction of the propagation of the sound
waves.The particles in the medium oscillate to and fro in the case of longitudinal waves.
Transverse Waves - A transverse wave is produced when the particles of the medium
oscillate in a direction which is perpendicular to the direction of the propagation of the
wave. The particles in a transverse wave oscillate in an up and down motion. For
Example, light waves are transverse in nature.

Longitudinal vs. Transverse Waves

• A sound wave is characterized by three factors:
• Amplitude

• Frequency

• Speed

Characteristics of Sound
Compression The compression region is represented by the upper part of the wave
(C) curve.
 It is a region where particles cluster together.
The density, as well as pressure, is always high in this region.
A refraction is represented by the lower part of the wave curve.
Refraction (R) It is a region where the particles separate out.
Refraction region always has lower pressure.
Crest It is the peak of the curve
Trough It is the crust of the curve
The distance between two consecutive compressions or refractions is
Wavelength (λ) called Wavelength.
SI unit: metre (m)
The number of oscillations per unit time is called the Frequency of a
Frequency (f) Wave (Number of compressions + the number of refractions per unit time)
SI unit: Hertz (Hz)
The time taken between two consecutive compressions or refractions to
cross a fixed point is called Time Period of the Wave.
Time Period (T) In other words, the time taken for one complete oscillation through a
medium is called a Time Period.
SI unit: second (s)
The
relationship
between f = 1/T
frequency and
time period
Pitch of a sound depends upon:
1. the frequency of the sound
2. size of the object producing the sound
3. type of the object producing the sound

Pitch

The value of the maximum or minimum disturbance caused in the medium

Amplitude
is called the Amplitude of the Sound.
 Amplitude defines if the sound is loud or soft.

The timbre or quality of sound is a characteristic with which we can

Timber differentiate between different sounds even if they have same pitch and
amplitude.
Tone The sound which has single frequency throughout is called a Tone.
A sound with more than one frequency is called a Note. It is pleasant to
Note
listen
It is an unpleasant sound.

Noise

Music It is a sound which is pleasant and has rich quality

The distance by which a compression or refraction of a wave travels per
unit time is called as Sound’s Speed.
The Speed of
SI unit: metres/seconds
sound (v)
v = wavelength / time = λ/T = λ*F
Speed of Sound in air = 333 m/s
The amount of sound energy that passes through a unit area per second is
Intensity
called its intensity
It is how our ears respond to a sound.
Loudness Two sounds with same intensity can vary in loudness only because we can
detect one sound easier than the other.
• Sound cannot travel at the same speed in different mediums. The speed of
sound in a medium is affected by three things:
 • The density of the medium. For instance, speed of sound is the
maximum through solids

• The temperature of the medium. As the temperature increases, the

sound propagates easily.

• Humidity in the air also affects the travel of sound. As the humidity
increases, so does the propagation of sound.

What is a sonic boom?

When an object travels in the air with a speed greater than that of the sound, it produces
a sound with high energy. This energy is loud enough that it can break glasses or
damage the buildings. The sound produced is similar to the sound of an explosion or
thunderclap.

These objects exert a large amount of pressure on the air which causes the production of
shock waves in the air. These shock waves produce extremely large and loud sound
waves which are called Sonic booms.

Sonic Boom
• Speed of light in air = 3 * 10 m/s
8

• Speed of sound in air = 333 m/s

This clearly states that sound travels a lower speed than that of light in air. This is a
reason why at the time of lightening, the light is visible instantly while the sound of the
thunder reaches our ears after a few seconds.
• Sound can bounce off a solid or a liquid. Some materials like metals and walls are
called Good Reflectors of Sound as they do not absorb the sound while others like
clothes and sponge are called Bad Reflectors of Sound as they absorb the sound
easily.
Laws of Reflection of Sound
• The incident sound wave, the reflected sound wave and the normal, all lie in
the same plane.
 Laws of Reflection of Sound
• The angle of incident of incident sound wave is equal to the angle of reflection
formed by the reflected sound wave, that is, i = r
Echo
When we hear the same sound again and again in a medium it is called Echo. The sound
or echo persists in our brain for 0.1 seconds. This means that the difference between
sound and its echo should be at least 0.1 seconds. It is produced as a result of refl ection
of sound through a medium. If sound reflects more than once we may hear multiple
echoes.

Echo
Reverberation
It is the persistence of a sound after a sound is produced. A reverberation is created
when a sound signal is reflected multiple of times until it reaches a sound wave that
cannot be heard by human ears. Auditoriums and big halls often have to deal with
reverberation. That is why the roofs are made up of soundproof materials like Flipboard
and the chairs in the halls are also made up of fabrics that can absorb sound.

Reverberation
Advantages of Multiple Reflection of Sound
• Horns, trumpets, loudhailers or megaphones are designed in such a way that
sound can travel in a particular direction only without spreading out
everywhere. This makes it easier for the audience to listen to the speaker. All
these instruments work on the phenomena of multiple reflections of sound.

Multiple Reflections through a horn and megaphone

• The multiple reflections in a stethoscope tube make it possible for the doctors
to listen to a patient’s heartbeat.

• Concert halls are generally covered so that sound can reflect through it and
reach the wider audience.

The range of sound – on the basis of the range of frequency of a sound, it is categorized
into ultrasound and infrasound.
Human auditory range is between 20 Hz and 20000 Hz.

Infrasound Ultrasound
Infrasound refers to the sound with frequency Ultrasound refers to the sound with
lower than 20 Hz which can’t be heard by frequency higher than the upper limit (20
humans. kHz) of frequencies audible to normal
human ears.
Ultrasound is commonly used to find flaws in
materials to measure the thickness of
Infrasound is used to stabilize myopia in objects, to fund physical abnormalities in
young kids. various parts of human body, as well as in
the form of a sound ranging device called
Sonar.
Infrasound is influenced by the atmosphere so Ultrasound is not influenced by any such
it can be used to monitor the activities of the factors.
atmosphere.
In particular, natural disasters such as In particular, ultrasound is also used in
volcanic eruptions, earthquakes etc can be micro welding. The weld is produced by the
forecasted by monitoring the infrasonic waves. application of higher frequency vibratory
energy as the parts are held together with
force.

Range of Infrasound and Ultrasounds

Hearing Aid- The Hearing Aid contains a microphone which receives the sound from the
outer atmosphere and converts it into electrical energy. This electrical energy is passed
through an amplifier which amplifies the sound and then moves it to a speaker. The
speaker then converts the electrical signal into sound waves and sends it to the ear and
provides a clear hearing.
Applications of Ultrasound
The ultrasound waves are the sound waves with high frequency. Due to this, they can
travel long distances despite any obstacles between their paths.

• The ultrasound waves are used in clearing parts of objects that are hard to
reach such as a spiral tube or electronic components. In order to clean the
objects, they are put in a solution, then the ultrasonic waves are passed
 through the solution. As a result, the dust particles on the object get detached
and fall off them.

• Ultrasound waves can recognize tiny cracks in metallic objects that are used in
the manufacture of large structures, buildings and scientific equipment. The
presence of such cracks can lower the strength of these structures and
machines. Hence, the ultrasound waves are passed through the metallic
objects and detectors are used to detect the waves that pass through the
cracks. If a crack is present the ultrasound waves would reflect back.

Ultrasound waves can detect cracks in a metal

• Ultrasonic waves are also used in a medical process
called Echocardiography. In this process, the ultrasound waves are passed
through various parts of the heart in order to form the images of the organ.
• Ultrasonic waves are also used in a procedure called Ultrasonography. In this
procedure, the ultrasonic waves are passed through the internal organs of the
body in order to get their image. In this way, the doctors can find out the cause
of a disease or any abnormalities in the organs. The ultrasound waves travel
through the tissues of the body and as soon as the density of the tissue
changes they reflect back. The reflected waves are then converted into
electrical signals which form the images of the internal organs.
• Ultrasound waves are also used to break the kidney stones.
SONAR – Sound Navigation and Ranging
 Sonar
• This device is used to find the distance, direction and speed of objects that are
present under the water. It uses Ultrasonic waves to do so.

• The Sonar consists of two main devices – The transmitter and the detector (or
receiver). The main function of the transmitter is the production and
transmission of the Ultrasonic waves in water.

• As these waves travel underwater, they, when hit by an object, reflect back to
the detector. The detector then converts these sound waves into electrical
signals which are then interpreted.

• The distance of the object is calculated with the help of the speed of sound in
water and time taken by the way to reach the detector. This process is
called Echo Ranging.
• Uses of Sonar

• Finding the depth of a water body such as sea

• Detecting the presence of underwater objects like submarines, hills,

icebergs and ships

How do bats search their prey?

Bats generate Ultrasonic waves. As these waves hit an object, they get reflected back to
the bat’s ears. The bats can understand the nature of reflection of these waves and then
can decide the position of the object over their prey.

Ultrasonic waves generated by bats

The Human Ear

Structure of Human Ear

Our ears allow us to receive audible frequencies in our surroundings. They then convert
these sounds into electrical signals which are then passed through a special nerve called
the auditory nerve to our brain. The brain that interprets these signals and r esponds
accordingly.

• Pinna – The outer part of the ear that gathers sound from the environment.
• Auditory Canal – Sound collected from the surroundings passes through the
Auditory Canal.
• Eardrum or Tympanic Membrane – It is located at the end of the auditory
canal. The eardrum when receives a compression moves inwards because of
increased pressure. Similarly, when it receives refraction it moves outwards
due to a decrease in pressure. As a result, it starts to vibrate inwards and
outwards on receiving a sound wave.
• The Middle Ear – It consists of three bones (hammer, anvil and stirrup). These
bones amplify the vibrations produced by the eardrum. These vibrations are
then passed onto the inner ear by the middle ear.
• Cochlea – It is located in the inner ear. It converts the vibrations into electrical
signals which are then carried to the brain by the auditory nerve.