Scribd
Upload
10 views2 pages

JNTUH USED 25-11-2020AM: (Civil Engineering)

3

Uploaded by

saruntejadharreddy.cegnit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views2 pages

JNTUH USED 25-11-2020AM: (Civil Engineering)

3

Uploaded by

saruntejadharreddy.cegnit
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Code No: 154CB R18

JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY HYDERABAD


B. Tech II Year II Semester Examinations, November/December - 2020
JN
STRUCTURAL ANALYSIS – I
(Civil Engineering)
Time: 2 Hours Max. Marks: 75
Answer any Five Questions
TU
All Questions Carry Equal Marks
---

1. A plane truss, made up of equilateral triangles of side 3 m, is supported and loaded as


H
shown in Fig.1. Using the method of sections, determine the forces in the members 1, 2
and 3. [15]
U
SE
D
Fig.1
25
2. Analyse the plane truss shown in Fig.2, using tension coefficient method. [15]
-1
1-
20
2
Fig.2
0A
3. Using unit load method, determine the deflection under the concentrated load and the
slope at the right hand side support of a beam, span 6 m, supported and loaded as shown
in Fig. 3. [15]
M

Fig. 3
4. A three-hinged circular arch of span 30 m and a central rise of 6 m is subjected to two
concentrated loads 150 kN and 100 kN at a distance of 8 m and 18 m from the left hinge.
Find the support reactions and the horizontal thrust at a section 12 m from the right
JN
support. [15]

5. Find the maximum deflection and the slope at the prop of a beam supported and loaded as
shown in Fig.4. [15]
TU
H
Fig.4
U
6. Determine the deflection and slope, under the point of action of 50 kN load, of a beam
supported and loaded as shown in Fig.5. [15]
SE
D
Fig.5
25
7. Using the slope-deflection method, analyse the frame shown in Fig. 6. [15]
-1
1-
20
2
Fig. 6
0A
8. An uniformly distributed load of intensity 20 kN/m, 5 m long crosses a simply supported
girder of span 24 m from left to right. Calculate the maximum positive and negative shear
forces at a section 10 m from the right support. [15]
M
---ooOoo---

You might also like