0% found this document useful (0 votes)
23 views15 pages

Vortex - FTD Instruments

Uploaded by

enrique
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
23 views15 pages

Vortex - FTD Instruments

Uploaded by

enrique
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

www.controlict.

com

1
1. Working Principle
When a column body placed in flowing fluids in pipe, a series of vortices will be
generated alternately on each side of the object as shown as below, these eddies
known as “Karman Vortices”, the frequency of the vortex shedding is related to the
velocity of the fluid and the width of the body. Expressed by formula as below:

Thereinto f----fre quency of Karman Vortex shedding


Sr----Strouhal number

Because the frequency of the vortex shedding is proportional to the velocity, it can be used to calculate the
instantaneous flowrate .

Strouhal number is a very important coefficient in the Vortex Flowmeter. In


the range of straight line of St≈0.17 in curve, frequency of vort ex shedding is
proportional to the velocity, so as long as the frequency (f ) be detected, the
velocity (v) will be obtained, and volumetric flowrate will be got according to
v.

For FTLU Vortex Flowmeter, its frequency of the vortex shedding was detected by the stress force which ex-
erted
www.controlict.com

2. Main Features:
1. Best of FTLU Intelligent Vortex Flow Transducer is piezocrystal built in bluff body to avoid fluid turbulence
caused by external type, no zero drift, and high reliability.
2 2. By lots of wave analysis of vortex fow transducer for a long time, FTD Company has designed the most
scientific probe shape, wall thickness, height, probe rod diameter and matching piezocrystal, adopts ad-
vanced CNC to machine to ensure technical parameters of proper alignment and smooth finish etc., and
with special treating process to maximatily overcome existed signal influence by intrinsic self-oscillation
frequency.
3. FTLU Intelligent Vortex Flow Transducer has good commonality and interchangeability. Adopt
advanced CNC to machine parts such as transducer body and bluff body etc. to ensure
machining accuracy to make parts (especial for bluff body) has good commonality, so that,
repeatability and accuracy won’t be affected by parts change and get signal with high signal noise
ratio and good stability.
4. Simple & fixed structure, no moving parts, high reliability, convenient maintenance.
46
5. Wide measuring range, turndown ratio can reach 10:1 in Reynolds Number 2×10~ 7× 10.
6. Detecting element not contact with the measured fluids directly, stable performance and long
service life.
7. Detecting probe and bluff body installed independently, and high temperature resistance
piezocrystal sealed in bluff body make transducer simple structure, good commonality and high
stability.
8. Output pulse signal and current signal directly proportional to flowrate, and have RS-485, Hart,
ModBus communication for convenient computer networking.
9. When vortex flow transducer measures liquid volumetric flow, it does not need temperature,
pressure compensation. Vortex output signal is linear to velocity, that is to say, directly
proportional to volumetric flowrate. When measure gas or steam, it needs temperature and
pressure compensation. Compensating pressure and temperature is to get volumetric flow of gas
under standard state or mass flow of steam.
10. Low pressure loss, just 1/4 ~ 1/2 of orifice plate.
11. In a specific range of Reynolds Number, flow character just refers to bluff body shape and
dimension, and not affected by fluid pressure, temperature, viscosity, density and ingredients.
12. Wide application, can measure flowrate of steam, gas, liquid etc

3. Technical Parameter Table


Table 1
Installation Type Measured Fluid Accuracy Repeatability
±1.5 % 0.50%
Pipe Type Gas (incl.steam)
±1.0% 0.33%
Gas ±3.0% 1.00%
Inserted Type
Liquid ±2.5% 0.83%
www.controlict.com

Measuring Range Gas (incl.steam): 7~55 m/s (7~50 m/s for DN ≥ 200)
Liquid:0.7~5.5 m/s
GB 1.6Mpa,2.5Mpa,4.0Mpa,6.4Mpa
Rated Pressure DIN PN16,PN25,PN40
JIS 10K,20K,40K
ANSI Class 150,Class 300, Class 600
Fluid Temperature
-40~+250℃(-40~+120℃ for inserted) 3
+100~+350 ℃ (high temp)
Installation Type Pipe Vortex Flow Transducer
Inserted
Parts Name Material

Transducer Body 304 SS

Bluff Body 304SS

Detecting Probe 316SS


Connecting Rod 304SS
Radiattor A-alloy
High Temperature Resistance Asbestos
Gasket NBR
Graphite
24V DC
Power Suply 3.6V Lithium Battery (Local display)
Double Power Supply (24VDC,3.6V Lithium Battery)
Output Signal Pulse, 4~20mA, RS-485,Hart,Modbus

Electric Terminal M20*1.5

Protection Grade Flameproof Exd II BT3-6


Insteinsical Safe Exia II CT3-6
SS Sand-blast for Transducer Body
Body Process
And Plastic Coating for Amplifier Cover
Ambient -35~60℃ (No LCD)
Temperature -5~60 ℃ (with LCD)
Relative Humidity 5~95%

4. Flow Range
Selection of measuring saturated steam mass flowrate Measuring range (t/h)

Table 2
DN(mm) 0.1Mpa 0.2Mpa 0.3Mpa 0.4Mpa 0.5Mpa 0.6Mpa 0.7Mpa 0.8Mpa

7.0-56.7 81-74.3
15 5.8-38.74 kg/h
kg/h kg/h
8.8-91.6kg/h 9.7-108.8 kg/h 10.4-125.9 kg/h 10.9-141.9 kg/h 11.6-159.7 kg/h

20 10.6-68.9 kg/h 12.8-100.8 kg/h 14.7-132.0 kg/h 16.2-162.9 kg/h 17.8-193.5 kg/h 19.1-223.8 kg/h 20.2-252.3 kg/h 21.5-284.0 kg/h

25 13.4-17.7 kg/h 16.2-157.4 kg/h 18.2-206/3 kg/ 20.5-254.5 kg/h 22.4-302.3 kg/h 25.5-394.2 kg/h 25.5-394.2 kg/h 27.1-443.8 kg/h
h

32 21.8-176.5 kg/h 26.3-258.0 kg/h 29.6-338.1 kg/h 33.3-417.0 kg/h 36.2-495.1 kg/h 39.2~572.9 kg/h 25.5-394.2 kg/h 27.1-443.8 kg/h

40 26.5-275.8 kg/h 32.0-430.1 kg/h 36.1-528.2 kg/h 40.6-651.6 kg/h 44.1-773.7 kg/h 47.7-895.3 kg/h 0.05 1.01 0.05 1.14

50 0.04 0.43 0.04 0.64 0.05 0.83 0.06 1.01 0.06 1.21 0.07 1.39 0.08 1.58 0.09 1.77

65 0.07 0.73 0.08 1.06 0.09 1.39 0.10 1.72 0.11 2.04 0.12 2.36 0.13 2.66 0.14 2.99

80 0.10 1.09 0.12 1.61 0.13 2.19 0.14 2.60 0.15 3.09 0.16 3.58 0.17 4.03 0.18 4.55

100 0.15 1.72 0.18 2.52 0.21 3.29 0.23 4.06 0.25 4.84 0.27 5.60 0.28 6.31 0.30 7.10

125 0.27 2.69 0.31 3.94 0.36 5.16 0.41 6.37 0.46 7.55 0.51 8.74 0.56 9.85 0.61 11.09

150 0.33 3.87 0.40 5.67 0.46 7.43 0.51 9.17 0.56 10.88 0.60 12.59 0.64 14.19 0.71 15.97
www.controlict.com

200 0.70 6.27 0.84 9.17 0.95 12.00 1.06 14.81 1.16 17.59 1.25 20.34 1.33 22.93 1.42 25.82
250 1.25 9.79 1.51 14.31 1.68 18.76 1.92 23.13 2.07 27.48 2.26 31.79 2.41 35.83 2.54 40.34

300 1.43 14.40 2.17 20.61 2.70 27.01 2.76 33.32 2.93 39.57 3.23 45.78 3.45 56.61 3.64 58.09

4
Table 3

DN(mm) 0.9Mpa 1.0 Mpa 1.1 Mpa 1.2 Mpa 1.3 Mpa 1.4 Mpa 1.5 Mpa 1.6 Mpa

15 12.1-1766 kg/h 12.8-193.5 kg/h 13.2-210.3 kg/h 13.7-227.1 kg/h 14.3-243.8 kg/h 14.9-260.6 kg/h 15.3-2777.3 kg/h 15.8-294.1 kg/h

20 22.6-314.0 kg/h 23.8-343.9 kg/h 24.9-373.9 kg/h 26.1-403.7 kg/h 27.3-433.6 kg/h 28.2-463.3 kg/h 29.3-490.0 kg/h 30.4-522.8 kg/h

25 28.6-490.7 kg/h 30.0-537.3 kg/h 31.2-584.1 kg/h 32.4-630.7 kg/h 33.5-677.4 kg/h 34.8-723.9 kg/h 36-770.3 kg/h 37.2-816.9 kg/h

32 46.5-803.9 kg/h 48.0-880.4 kg/h 50.1-957.6 kg/h 0.05 1.04 0.05 1.11 0.05 1.18 0.06 1.25 0.06 1.34

40 0.05 1.26 0.06 1.38 0.06 1.49 0.06 1.61 0.06 1.74 0.06 1.86 0.07 1.97 0.07 2.09

50 0.09 1.97 0.10 2.15 0.10 2.33 0.11 2.52 0.11 2.71 0.12 2.90 0.12 3.08 0.13 3.26

65 0.14 3.31 0.15 3.63 0.15 3.95 0.15 4.27 0.16 4.58 0.16 4.89 0.17 5.21 0.18 5.52

80 0.19 5.02 0.20 5.50 0.21 5.98 0.22 6.45 0.23 6.94 0.24 7.42 0.25 7.88 0.26 8.36

100 0.32 7.85 0.33 8.56 0.35 9.35 0.37 10.09 0.38 10.84 0.39 11.58 0.40 12.32 0.41 13.07

125 0.66 12.27 0.72 13.44 0.79 14.60 0.85 15.77 0.90 16.94 0.97 18.10 1.02 19.26 1.07 20.42

150 0.78 17.66 0.84 19.35 0.90 21.03 1.08 22.71 1.17 24.38 1.25 26.06 1.32 27.73 1.39 29.41

200 1.53 28.54 1.64 31.27 1.75 34.00 1.87 36.70 2.01 39.42 2.13 42.12 2.26 44.82 2.39 47.53

250 2.68 44.61 2.84 48.89 3.01 53.11 3.23 57.34 3.37 61.59 3.51 65.81 3.65 70.03 3.79 74.27

300 3.82 64.23 4.01 70.33 4.25 76.44 4.49 82.57 4.74 88.69 4.98 94.77 5.23 100.84 5.46 106.94

(Note: Pressure above is gauge pressure)

Table 4

Measuring Volumetric flowrate of Gas(under


Measuring Mass Flowrate of Superheated Steam
operating pressure)
MAX
DN(mm) MIN flowrate (t/h) Max flowrate(t/h) DN (mm) MIN flowrate(m3/min) flowrate
(m3/min)

15 5.40 2 2
ρ kg/h 34.97ρ kg/h 15 0.088/ 2
ρ 0.59

20 9.88 2 2
ρ kg/h 62.17ρ kg/h 20 0.156/ 2
ρ 1.04

25 12.492 2
ρ kg/h 97.14ρ kg/h 25 0.201/ 2
ρ 1.61

32 20.352 2
ρ kg/h 159.15ρ kg/h 32 0.328/ 2
ρ 2.65

40 24.882 2
ρ kg/h 248.69ρ kg/h 40 0.397/ 2
ρ 4.16

50 37.102 2
ρ kg/h 388.58ρ kg/h 50 0.658/ 2
ρ 6.48

65 65.672 2
ρ kg/h 656.68ρ kg/h 65 0.995/ 2
ρ 10.94

80 99.662 2
ρ kg/h 994.75ρ kg/h 80 1.51/ 2 ρ 16.57

100 0.142 2
ρ 1.55ρ 100 2.36/ 2
ρ 25.91

125 0.222 2
ρ 2.44ρ 125 3.68/ 2
ρ 40.48
150 0.312 2
ρ 3.50ρ 150 5.27/ 2
ρ 58.30
www.controlict.com

200 0.652 2
ρ 5.63ρ 200 9.42/ 2 ρ 94.22

250 1.052 2
ρ 8.83ρ 250 14.73/ 2
ρ 147.22

300 1.352 2
ρ 12.72ρ 300 21.2/ 2
ρ 212.00

350 28.86/ 2
288.44
ρ
5
400 37.7/ 2 ρ 376.78

450 47.71/ 2
ρ 476.89

500 58.9/ 2
ρ 588.78

600 84.82/ 2
ρ 847.78

700 115.4/ 2
ρ 1154.00

800 150.8/ 2
ρ 1507.22

900 190.8/ 2
ρ 1907.56

1000 235.6/ 2
ρ 2355.00

1200 339.3/ 2
ρ 3391.22
Note : ρ---- Density of superheat steam under operating Note :
condition.(Kg/m3) 1. ρ---- Density of superheat steam under operating
Refer to Appendix .4 condition.(Kg/m3)

2. Formula : ρ=

Thereinto : ρ--Operating pressure(Gauge pressure)Mpa


t—Medium temperature ℃
R—Gas constant
Refer to Appendix . 3(Gas character and
common date)
3. DN~DN300 is piped vortex flow transducer
DN300~DN1200(expendable to DN1600mm) is
measuring range of inserted vortex flow transducer

Table 5

Measuring Volumetric Flowrate of Gas(under Measuring Volumetric Flowrate of Liquid


Standard condition )
DN (mm) Min flowrate Max flowrate(Nm3/ DN(mm) Min flowrate(m3/h) Max flowrate(m3/h)
(Nm3/min) min)
15 0.088k/ 0.59k 15 12.01/ 2
ρ 3.53

20 0.156 k/ 2
ρ 1.04k 20 21.18/ 2
ρ 6.22

25 0.201 k/ 2
ρ 1.61k 25 33.2/ 2 ρ 9.71

32 0.328 k/ 2
ρ 2.65k 32 106.6/ 2
ρ 15.92

40 0.397 k/ 2
ρ 4.16k 40 133.7/ 2
ρ 24.87

50 0.658 k/ 2
ρ 6.48k 50 167/ 2
ρ 38.86

65 0.995 k/ 2
ρ 10.94k 65 226.4/ 2
ρ 65.67

80 1.51 k/ 2
ρ 16.57k 80 343.1/ 2
ρ 99.47

100 2.36 k/ 2
ρ 25.91k 100 536/ 2
ρ 155.43

125 3.68 k/ 2
ρ 40.48k 125 837.7/ 2
ρ 242.88
www.controlict.com

150 5.27 k/ 2
ρ 58.30k 150 1206.4/ 2
ρ 349.69

200 9.42 k/ 2
ρ 94.22k 200 2144.8/ 2
ρ 612.72

250 14.73 k/ 2
ρ 147.22k 250 3351.3/ 2
ρ 971.41

300 21.2 k/ 2
212.00k 300 4825.9/ 2
1398.87
6 ρ ρ

350 28.86 k/ 2
ρ 288.44k 350 6568.5/ 2
ρ 1904.02

400 37.7 k/ 2
ρ 376.78k 400 8576.7/ 2
ρ 2486.88

450 47.71 k/ 2
ρ 476.89k 450 10856.8/ 2
ρ 3147.43

500 58.9 k/ 2
ρ 588.78k 500 13405.8/ 2
ρ 3885.75

600 84.82 k/ 2
ρ 847.78k 600 19303.9/ 2
ρ 5595.48

700 115.4 k/ 2
ρ 1154.00k 700 26274/ 2
ρ 7616.07

800 150.8 k/ 2
ρ 1507.22k 800 34316.2/ 2
ρ 9947.52

900 190.8 k/ 2
ρ 1907.56k 900 43433.7/ 2
ρ 12589.83

1000 235.6 k/ 2
ρ 2355.00k 1000 53623.3/ 2
ρ 15543

1200 339.3 k/ 2
ρ 3391.22k 1200 77215.6/ 2
ρ 22381.92

Notes : Notes:
1 . ρ---gas density under operating condition (Kg/m3) 1. Ρ----liquid density under operating condition(Kg/m3)
Density of water under normal temperature and pressure is
2. 1000Kg/m3 2 ρ =31.623

Thereinto : P -- working pressure (gauge pressure ) Mpa 2. The flowrate measuring range:
t--- temperature(℃ ) DN15~500 for Piped Vortex Flow transducer
3. Standard condition 20℃ ,0.1Mpa (absolute DN500~1200 (expandable to 1600mm) for Inserted Vorte)
pressure),or under (Flow transducer
Standard atmospheric pressure at 20℃
4. The flowrate measuring range:
DN15~500 for Piped Vortex Flow transducer
DN500~1200(expandable to 1600 mm) for Inserted
Vortex Flow transducer

5. Selection Table of FTLU Intelligent Vortex Flow Transducer


Table 6

Item Code Description


Factory Mark FTLU FTD Automation Instruments
Working Principle V Karman Vortices
Meter Type F Flowmeter
Meter Catagory N Standard Intelligent
Installing Type -1 Flanged(DN50~DN300)
2 Wafer type (DN15~DN300)
3 Fixed Inserted
4 Adjustable Inserted
5 Adjustable Inserted (with Ball Valve)
www.controlict.com

Measured Fluid 2 Liquid


3 Gas
4 Steam
Nominal Diameter -015 15mm
020 20mm 7
02 25mm
03 32mm
04 40mm
05 50mm
06 65mm
08 80mm
10 100mm
12 125mm
15 150mm
20 200mm
25 250mm
30 300mm
DN/10(for Inserted) DN(DN ≥ 250mm)
Indicator D With Digital Indicator
N No Indicator
Power Supply -1 24V DC
2 3.6V Lithium Battery
3 Double Power Supply(24V DC,3.6v Lithium Battery)
Output Signal 0 No output
1 Pulse Output
2 Two Wire :4~20mA DC
3 RS-485 (manufacture-defined protocol)
4 Hart
5 RS-485 (Modbus)
Fluid Temperature 1 Standard -40~250℃ (-40~120℃ for inserted)
3 High Temperature Type :+100~+350℃
Rated Pressure -G1 GB 1.6Mpa
G2 GB 2.5 Mpa
G3 GB 4.0 Mpa
G4 GB 6.4 Mpa
D1 DIN PN16
D2 DIN PN25
D3 DIN PN40
J1 JIS 10K
J2 JIS 20K
J3 JIS 40K
A1 ANSI Class 150
A2 ANSI Class 300
A3 ANSI Class 600
Explosion Proof N Non
d Flameproof
i Intrinsically Safe
www.controlict.com

Compensation 0 No compensation
1 With temperature and pressure compensation
Companion Flange 0 No
1 With
8

6. Dimensions
1) Wafer Type Vortex Flowmeter Dimension

Table 7

DN H1±2 L ΦD ΦK n-ΦL C

15 341 100 95 65 4-Φ14 14

20 343 100 105 75 4-Φ14 16

25 346 100 115 85 4-Φ14 16

32 349 100 140 100 4-Φ18 18

40 353 100 150 110 4-Φ18 18

Notes:

1. This outline drawing is high temperature type vortex flow transducer; standard type does not have
cooling fin;
2. Flange dimension refers to GB/T9115.2-2000, unit is mm.
www.controlict.com

2) Wafer Type Vortex Flowmeter Dimension


9

Table 8
1.6 Mpa 2.5 Mpa 4.0Mpa 6.4Mpa
DN H1±2 L
ΦD ΦK n-ΦL C ΦD ΦK n-ΦL C ΦD ΦK n-ΦL C ΦD ΦK n-ΦL C
50 353 100 165 125 4-Φ18 20 165 125 4-Φ18 20 165 125 4-Φ18 20 180 135 4-Φ22 26

65 359 100 185 145 4-Φ18 20 185 145 8-Φ18 22 185 145 8-Φ18 22 205 160 8-Φ22 26

80 365 100 200 160 8-Φ18 20 200 160 8-Φ18 24 200 160 8-Φ18 24 215 170 8-Φ22 28

100 374 100 200 180 8-Φ18 22 235 190 8-Φ22 26 235 190 8-Φ22 26 250 200 8-Φ26 30

125 388 100 250 210 8-Φ18 22 270 220 8-Φ26 28 270 220 8-Φ26 28 295 240 8-Φ30 34

150 401 100 285 240 8-Φ22 24 300 250 8-Φ26 30 300 250 8-Φ26 30 345 280 8-Φ33 36

200 428 125 340 295 12-Φ22 26 375 310 12-Φ26 32 375 320 12-Φ30 36 415 345 12-Φ36 42

250 454 145 405 355 12-Φ26 28 450 370 12-Φ30 35 450 385 12-Φ33 42

300 480 160 460 410 12-Φ22 32 515 430 16-Φ30 38 515 450 16-Φ33 48

Notes:
1. This outline drawing is high temperature vortex flow transducer; standard type does not have cooling fin;
2. Flange dimension refers to GB/T9115.2-2000, unit is mm.
www.controlict.com

3) Flange type Vortex Flowmeter Dimension (GB/T9115.2-2000)

10

Table 9
H±3 1.6MPa 2.5MPa 4.0MPa 6.4MPa
H1
DN 1.6 2.5 4.0 6.4 ±2
L ΦD ΦK n-ΦL L ΦD ΦK n-ΦL L ΦD ΦK n-ΦL L ΦD Φk N-ΦL
MPa MPa MPa MPa
50 436 436 436 353 190 165 125 4- 190 165 125 4-Φ18 190 165 125 4-Φ18
Φ18
65 452 452 452 359 190 185 145 4- 200 185 145 8-Φ18 200 185 145 8-Φ18
Φ18
80 466 466 466 365 190 200 160 8- 210 200 160 8-Φ18 210 200 160 8-Φ18
Φ18
100 485 492 492 374 200 220 180 8- 210 235 190 8-Φ22 210 235 190 8-Φ22
Φ18
125 514 524 524 388 200 250 210 8- 220 270 220 8-Φ26 220 270 220 8-Φ26
Φ18
150 544 552 552 401 210 285 240 8- 220 300 250 8-Φ26 220 300 250 8-Φ26
Φ18
200 599 609 616 428 235 340 295 12- 235 360 310 12-Φ30 255 375 320 12-Φ30
Φ22
250 657 667 680 690 454 265 405 355 12- 265 425 370 12-Φ30 275 450 385 12-Φ33 275 470 400 12-
Φ26 Φ36
300 716 723 738 746 480 280 460 410 12- 280 485 430 16-Φ30 290 515 450 16-Φ33 290 530 460 16-
Φ26 Φ36
Notes:
1. This outline drawing is high temperature vortex flow transducer; standard type does not have cooling fin;
2. Flange dimension refers to GB/T9115.2-2000, unit is mm.
www.controlict.com

4) Flange type Vortex Flowmeter Dimension (DIN2631-2637)

11

Table 10
H±3 PN16 PN25 PN40
DN H1±2
PN16 PN25 PN40 L±2 ΦD ΦK n-ΦL L±2 ΦD ΦK n-ΦL L±2 ΦD ΦK n-ΦL
50 436 436 436 353 190 165 125 4-Φ18 190 165 125 4-Φ18 190 165 125 4-Φ18
65 452 452 452 359 190 185 145 4-Φ18 200 185 145 8-Φ18 200 185 145 8-Φ18
80 466 466 466 365 190 200 160 8-Φ18 210 200 160 8-Φ18 210 200 160 8-Φ18
100 485 485 492 374 200 220 180 8-Φ18 210 235 190 8-Φ22 210 235 190 8-Φ22
125 514 514 524 388 200 250 210 8-Φ18 220 270 220 8-Φ26 220 270 220 8-Φ26
150 544 544 552 401 210 285 240 8-Φ22 220 300 250 8-Φ26 220 300 250 8-Φ26
12- 12- 12-
200 599 599 616 428 235 340 295 235 360 310 255 375 320
Φ22 Φ26 Φ30
12- 12- 12-
250 657 657 680 454 265 405 355 265 425 370 275 450 385
Φ26 Φ30 Φ33
12- 16- 16-
300 716 716 743 480 280 460 410 280 485 430 290 515 450
Φ26 Φ30 Φ33
Notes:
1.This outline drawing is high temperature vortex flow transducer; standard type does not have cooling fin;
2.DIN flange size refers to DIN2631-2637,unit is mm;
www.controlict.com

5). Flange type Vortex Flowmeter Dimension (JIS B2220:2004)

12

Table 11
H±3 10K 20K 40K
DN H1±2
10K 20K 40K L±2 ΦD ΦK n-ΦL L±2 ΦD ΦK n-ΦL L±2 ΦD ΦK n-ΦL
50 431 431 436 353 190 155 120 4-Φ15 190 155 120 8-Φ19 190 165 130 8-Φ19
65 447 447 460 359 190 175 140 4-Φ15 200 175 140 8-Φ19 200 200 160 8-Φ23
80 458 466 471 365 190 185 150 8-Φ15 210 200 160 8-Φ23 210 210 170 8-Φ23
100 480 487 500 374 200 210 175 8-Φ15 210 225 185 8-Φ23 210 250 205 8-Φ25
125 514 524 539 388 200 250 210 8-Φ19 220 270 225 8-Φ25 220 300 250 8-Φ27
150 542 554 579 401 210 280 240 8-Φ19 220 305 260 12-Φ25 220 355 295 12-Φ33
200 594 603 631 428 235 330 290 12-Φ19 235 350 305 12-Φ25 255 405 345 12-Φ33
250 655 670 692 454 265 400 355 12-Φ23 265 430 380 12-Φ27 275 475 410 12-Φ33

300 708 726 756 480 280 445 400 16-Φ23 280 480 430 16-Φ27 290 540 470 16-Φ39

Notes:
1.This outline drawing is high temperature vortex flow transducer;standard type does not have cooling fin;
2.JIS flange size refers to JIS B2220:2004,unit is mm.
www.controlict.com

6). Flange type Vortex Flowmeter Dimension (ANSI B16.5)

13

Table12
HO CL150 CL300 CL600
DN CL150 CL300 CL600 H1
L ΦA ΦJ H-ΦI L ΦA ΦJ H-ΦI L ΦA ΦJ H-ΦJ
2 17.40 17.65 17.65 13.90 7.50 6.00 4.75 4-0.75 8.00 6.50 5.00 8-0.75 9.00 6.50 5.00 8-0.75

2 1/2 17.88 18.23 18.23 14.13 7.50 7.00 5.50 4-0.75 9.00 7.50 5.88 8-0.88 9.00 7.50 5.58 8-0.88

3 18.62 18.87 18.87 14.37 7.50 7.50 6.00 4-0.75 9.00 8.25 6.62 8-0.88 9.50 8.25 6.62 8-0.88

4 19.22 19.72 20.10 14.72 8.00 9.00 7.50 8-0.75 9.00 10.00 7.88 8-0.88 10.00 10.75 8.50 8-1.00

5 20.28 20.78 21.78 15.28 8.00 10.00 8.50 8-0.88 9.50 11.00 9.25 8-0.88 10.50 13.00 10.50 8-1.12
12-
6 21.29 22.04 22.79 15.79 8.50 11.00 9.50 8-0.88 9.50 12.50 10.62 10.50 14.00 11.50 12-1.12
0.88
12-
8 23.60 24.35 25.10 16.85 9.50 13.50 11.75 8-0.88 11.00 15.00 13.00 12.50 16.50 13.75 12-1.25
1.00
12- 12.50 17.50 15.25 16-
10 25.87 26.62 27.87 17.87 10.50 16.00 14.25 14.00 20.00 17.00 16-1.38
1.00 1.12
12- 13.50 20.50 17.75 16-
12 28.40 29.15 29.90 18.90 11.00 19.00 17.00 15.00 22.00 19.25 20-1.38
1.00 1.25
Notes:
1.This outline drawing is high temperature vortex flow transducer;standard type does not have cooling fin;
2.ANSI flange size refers to ANSI B16.5, unit is mm
www.controlict.com

6) Fixed Insertion Vortex Flowmeter Outline Dimension

Parts:

14 1. Converter
2. Body flange
3. short duct with flange
4. Outer wall of customer’s pipe
5. Inserted rod
6. Vortex transducer
7. Customer’s pipe
8. R=1/2” diameter of the pipe (DN<800)
R=0.121 inner diameter of the pipe (DN≥800)

Table 13
DN OD X Thickness R DN OD X Thickness R

250 273 X 11.5 125 800 820 X 10 96.8

300 325 X 12.5 150 900 920 X 10 108.9

350 377 X 13.5 175 1000 1020 X 10 121

400 426 X 13 200 1200 1220 X 10 145.2

450 478 X 14 225 1400 1420 X 10 169.4

500 529 X 14.5 250 1600 1620 X 10 193.6

600 630 X 15 300 1800 1820 X 10 217.8

700 720 X 10 350 2000 2020 X 10 242

Notes: Above information is just for reference, mm for unit


www.controlict.com

7) Adjustable Insertion Vortex Flow meter outline Diamension

Parts: 15
1. Converter
2. Screw rod
3. Encloser
4. Seat for inserted rod
5. Ball valve
6. Inserted rod
7. Vortex transducer
8. Vortex transducer
9. Hand handle
10. Guide rod
11. Scale
12. R=1/2” diameter of the pipe (DN<800)
R=0.121 inner diameter of the pipe (DN≥800)

Table 14
DN OD X Thickness R DN OD X Thickness R

250 273 X 11.5 125 800 820 X 10 96.8

300 325 X 12.5 150 900 920 X 10 108.9

350 377 X 13.5 175 1000 1020 X 10 121

400 426 X 13 200 1200 1220 X 10 145.2

450 478 X 14 225 1400 1420 X 10 169.4

500 529 X 14.5 250 1600 1620 X 10 193.6

600 630 X 15 300 1800 1820 X 10 217.8

700 720 X 10 350 2000 2020 X 10 242

Notes: Above information is just for reference, mm for unit

You might also like