A

Mini Project
On
“ACCIDENT ALERT VEHICLE TRACKING SYSTEM USING GPS AND GSM”

A Mini project report submitted in partial fulfillment of the

Requirements for the award of the degree of

Bachelor of Technology

In

Electronics and Communication Engineering

Submitted by

JARGANA KALYANKUMAR 21T81A0407

SABHAVATH MAHESH 21T81A0410

SAMREDDY CHINDU 21T81A0404

KILARI NAGALAKSHMI 21T81A0412

Under the esteemed guidance of

Dr.A.SREENIVASA ROA
M.Tech,Ph.D
HEAD OF THE DEPARTMENT,

Department of ECE, AITS, Hyderabad.

Department of Electronics and Communication Engineering

Annamacharya Institute of Technology &

Sciences
Piglipur (V), Batasingaram (P), Hayatnagar (M), R.R. Dist., Hyderabad: 501512.
 (Affiliated to JNTU, Hyderabad)
2021-2025
ANNAMACHARYA INSTITUTE OF TECHNOLOGY &SCIENCES
Piglipur, Batasingaram Panchayath, Hayath Nagar Mandal, R. R. Dist., Hyderabad: 501 512, TS.
(Approved by AICTE, New Delhi & Affiliated to JNTU, Hyderabad) College Code: T8

DEPARTMENT
OF
ELECTRONICS AND COMMUNICATION ENGINEERING

CERTIFICATE
This is to certify that the Mini Project Work entitled “ACCIDENT
ALERT VEHICLE TRACKING SYSTEM USING GPS AND GSM” is
being submitted by following students during academic year 2024- 2025 in
practical fulfillment of the requirement for the award of the B.Tech Degree in
ELECTRONICS AND COMMUNICATION ENGINEERING Specialization
affiliated to JNTU, HYDERABAD.
JARGANA KALYANKUMAR 21T81A0407
SABHAVATH MAHESH 21T81A0410
SAMREDDY CHINDU 21T81A0404
KILARI NAGALAKSHMI 21T81A0412
This record is a Bonafide work carried out by them under my
guidance & supervision. The Result(s) embodied have not been submitted
to any other University/Institution for the award of any Degree/Diploma.

Supervisor/Guide HOD

Mini-Project Viva-Voce Exam Held on Dated

Internal Examiner External Examiner

 DECLARATION

This is to certify that the Mini Project work report in the present is titled
“ACCIDENT ALERT VEHICLE TRACKING SYSTEM USING GPS AND GSM ”
done by us.
No part of this is copied from books/journals/internet and wherever the portion is
taken, the same been duly referred in the text. The reported are based on the project work
done entirely by us and not copied from any other source.

We hereby declare that the Mini Project work entitled “ACCIDENT ALERT
VEHICLE TRACKING SYSTEM USING GPS AND GSM” is original record of work
submitted by all of us to JNTU, Hyderabad, under the guidance of Dr.A. SREENIVASA
ROA M.Tech ,Ph.D, Head of the department , Department of ECE for the award of B.Tech
Degree (E.C.E), which has not been submitted to any other university/ institution.

By/-

S.NO NAME ROLL NO SIGNATURE

1 JARJANA KALYAN KUMAR 21T81A0407

2 SABHAVATH MAHESH 21T81A0410

3 SAMREDDY CHINDU 21T81A0404

4 KILARI NAGALAKSHMI 21T81A0412

Place: AITS-Hyderabad.

Date:
 ACKNOWLEDGEMENT

At the outset, We would like to thank and praise the almighty god who has
given us wisdom and knowledge to complete our mini - project as a part of our
curriculum.

We would like to extend my heartfelt thanks to our Dr. L.V. Venu Gopala
Roa, Principal, and Dr. A. SREENIVASA RAO, M.Tech, Ph.D Associate. Prof and
Head of the Department, Electronics and Communication Engineering, Annamacharya
Institute of Technology and Sciences, Hyderabad, for giving us the permission to take
up this project. I would also express our gratitude to my internal guide Dr.A.
SREENIVASA ROA, M.Tech, Ph.D Head of the Department, Dept of ECE who has
given us his valuable suggestions.

Last but not least, We would like to thank Our Mini- Project Coordinator M.
RAVI, M. Tech, Asst. Prof., Dept of ECE all the staff members of Annamacharya
Institute of Technology and Sciences, especially the faculty of Electronics and
Communication Engineering Department whose constant support, encouragement and
co- operation helped us to complete our Mini-Project smoothly.

Once again, We thank one and all who are associated with us directly or indirectly
for completing this project.

By/-

MINI-PROJECT ASSOCIATES
 ABSTRACT
The fastest growth of technology has made our lifestyle Comfort. The

technology also increased the traffic risks and the road accidents take place

frequently which causes huge loss of life because inadequate of emergency

facility our project will help this displacement. The project concludes when a

vehicle meets with an accident, the vibration and IR sensor will analyze the signal

and this signal to Arduino. The notification is sent through GSM module the

location of the accident is gathered with the help of GPS module, to notify police

control room or a rescue team.

So, the police or rescue team can immediately trace the location through

the GPS Module, after receiving the information. Then after confirming the

location necessary action will be taken And Video of the accident can be live

streamed or can be stored with the help of camera. The aim of this work is to

automatically detect an accident and alert the rescue team or control station.
Mini Project Dept of ECE.AITH.HYD

Contents
S.NO TITLE PAGE – NO
1. INTRODUCTION 1
1.1 INTRODUCTION FOR EMBEDDED SYSTEM 2
1.2 FEATURES OF EMBEDDED SYSTEM 2
1.3 CHARACTERISTICS OF EMBEDDED SYSTEM 3
1.4 APPLICATIONS OF EMBEDDED SYSYTEM 3
2. BLOCKDIAGRAM 4
3. HARDWARE DESCRIPTION 5
3.1 ARDUINO CONTROLLER 5
3.1.1 OPERATION WITH PINS 6
3.2 POWER SUPPLY 11
3.2.1 TRANSFORMER 12
3.2.2 RECTIFIER 13
3.2.3 FILTER CAPACITOR 15
3.2.4 VOLTAGE REGULATOR 16
3.3 IR SENSOR 19
3.3.1 IR TRANSMITTER AND RECEIVR 19
3.3.2 PHOTO DIODES 21
3.3.3 FEATURES 23
3.3.4 APPLICATIONS 23
3.3.5 P-N vs PIN PHOTODIODES 24
3.4 ALCOHOL SENSOR 24
3.4.1 MQ3 ALCOHOL SENSOR MODULE PIN 24
 OUT/IN DIAGRAM
3.4.2 CIRCUIT DIAGRAM OF MQ3 26
ALCOHOL SENSOR
3.4.3 APPLICATIONS 27
3.5 LCD 28
3.5.1 16*2 ALPHA NUMERIC LCD 28
3.5.2 BLOCK DIAGRAM 28
3.5.3 SPECIFICATIONS 29
3.6 GSM MODULE 30
3.6.1 MODUM SPECIFICATIONS 31
3.6.2 FEATURES 31
3.6.3 GSM ARCHITECTURE 32
3.7 GPS MODULE 33
3.7.1 WORKING OF GPS 34
3.7.2 APPLICATIONS OF GPS 35
3.7.3 PINS OF GPS MODULE 35
3.7.4 SPECIFICATIONS OF GPS 36
3.8 RELAY 36
3.8.1 TYPES OF RELAY 36
3.8.2 APPLICATIONS 37
3.9 DC MOTOR 38
3.9.1 TYPES OF DC MOTORS 38
3.9.2 WORKING OF DC MOTOR 39
3.9.3 ADVANTAGES 40
3.10 BUZZER 41
3.10.1 WORKING OF BUZZER 41
3.10.2 TYPES OF BUZZER 42
 3.10.3 APPLICATIONS OF BUZZER 43
4 SOFTWARE EXPLANATION 44
4.1 INTODUCTION 44
4.2 THE INTERFACE 44
4.3 DESIGN CONSIDERATIONS 45
4.4 ARDUINO COMPILING 46
5 PROGRAMMING OF DEVICE 50
6 ADVANTAGES AND APPLICATIONS 74
7 EXPLANATION OF RESULT 75
8 CONCLUSION AND FUTURESCOPE 77
9 REFERNCES 78
Mini Project Dept of ECE.AITH.HYD

List of Figures

S.NO FIGURE NAME PAGE - NO

Fig 2.1 Block Diagram 4

Fig 3.1 Hardware image 6

Fig 3.2 Back side of module 7

Fig 3.3 Arduino board 8

Fig 3.4 Pin explanation 11

Fig 3.5 Power supply 12

Fig 3.6 Transformer 12

Fig 3.7 Center tapped transformer 12

Fig 3.8 Half wave rectifier 13

Fig 3.9 Full wave rectifier 14

Fig 3.10 Bridge Rectifier 14

Fig 3.11 Bridge rectifier with center tapped transformer 15

Fig 3.12 Filter capacitor 16

S.NO FIGURE NAME PAGE - NO

Fig 3.13 Voltage regulator 17

Fig 3.14 Circuit diagram of power supply 17

Fig 3.15 Specifications of IC7805 18

Fig 3.16 IR transmitter 19

Fig 3.17 IR reciever 20

Fig 3.18 Photo diode schematic symbol 21

Fig 3.19 Pin configuration of MQ3 module 25

Fig 3.20 Interfacing MQ3 with Arduino 26

Fig 3.21 Block diagram of LCD 28

Fig 3.22 LCD diagram 29

Fig 3.23 Specifications of LCD 29

Fig 3.24 GSM Module 30

Fig 3.25 GSM network 32

Fig 3.26 GSM network along with added elements 33

Fig 3.27 GPS Module 34

 Fig 3.28 Location tracking 34

Fig 3.29 GPS pin configuration 35

Fig 3.30 Solid state relay 37

Fig 3.31 Applications of relay 37

Fig 3.32 Brushed dc motor 39

Fig 3.33 Buzzer circuit diagram 42

Fig 4.1 Tool bar necessary for the interface 44

Fig 7.1 Hardware kit 75

Fig 7.2 Buzzer 75

Fig 7.3 Alcohol detection time 76

Fig 7.4 Alcohol not detection time 76

Mini Project Dept of ECE.AITS.HYD