CAN-USB-Micro
Small CAN USB Interface in DSUB9 Enclosure
CAN Network at USB 2.0
• USB 2.0 full-speed interface with data rates of 12 Mbit/s
• Differential CAN interface, 1 Mbit/s, ISO 11898-2
• Powered via USB
• Microcontroller ARM CortexTM-M3
Robust Metal Case with Status LEDs
• Die cast case, dimensions 35 mm x 15 mm x 45 mm
• Two LEDs show the state of the module
• Incl. USB cable
• Time stamped CAN messages with a resolution of 1 µsec
Wide Range of Application
• Silent mode support for analyzing tools
• Full compatibility with applications written for esd's NTCAN-API
• CANopen® and J1939 protocol libraries are available
• Firmware can be updated in the field
Software Support
Software drivers for Windows® 2K/XP/Vista/7/8 (32/64 bit) are
Low cost CAN Interface for PC included in delivery.
The CAN-USB/Micro is a very small CAN-USB interface that fits into Linux® kernel ≥ 2.6 is supported via Linux CAN (SocketCAN) and
a DSUB9 enclosure. The ARM Cortex-M3 micro controller handles NTCAN wrapper library.
CAN data. Drivers for other operating systems are available on request.
The non isolated CAN interface is directly powered by USB. The firmware can be updated from the PC. Updates are available
on the esd website.
USB Interface Libraries for the higher layer protocols CANopen and J1939 are
The module supports the USB 2.0 full-speed interface with data available. Additional free-of-charge esd CAN tools for Windows offer
rates up to 12 Mbit/s. efficient setup and analysis of CAN applications and networks.
DSUB9 Enclosure
Power
LED
Supply
green
3.3 V
DSUB9
Male Contacts
C CiA® Pin Assignment USB Type A
Connector
A
1.3 m USB Cable
N Physical USB PWR
CAN Layer CAN Microcontroller USB Data
B ISO11898-2
U
S
LED
red
Technical Specifications:
CPU: General (continued):
Controller ARM-Cortex-M3, 32-bit, 72 MHz Dimensions Cable length: 1.3 m including connectors
USB: DSUB9: 35 mm x 15 mm x 45 mm
USB USB 2.0 full-speed, 12 Mbit/s Weight 100 g
Connector 1x USB Type-A Order Information:
CAN: Hardware Order No.
CAN controller ISO 11898-1, integrated in microcontroller CAN-USB-Micro USB 2.0 (full-speed), 1x CAN, C.2068.02
ISO 11898
CAN interface ISO 11898-2, high-speed,
CAN layer 2 drivers for Windows and Linux are included in delivery 1.
bit rate up to 1 Mbit/s
Connector DSUB9 (male), CAN interface integrated Software Support for higher layer protocols
in DSUB9-enclosure
CANopen object licences including CD-ROM1:
General: CANopen-LCD Windows C.1101.06
Operating supply voltage 5 VDC ±20 % J1939 Stack object licenses including CD-ROM1:
Current consumption Typically (at 5 V): 50 mA J1939 Stack for Windows C.1130.10
Ambient temperature 0 °C ... +50 °C J1939 Stack for Linux via Linux CAN (SocketCAN)
and NTCAN wrapper library C.1130.11
Relative humidity Max. 90 % (non-condensing) 1 For detailed information about driver availability for your operating system please
contact our sales team.
©2014 esd electronic system design gmbh, Hannover All data are subject to change without prior notice. CiA® and CANopen® are registered community trademarks of CAN in Automation e.V..
I:\Texte\Doku\DBL\CAN\ENGLISCH\Blue\CAN-USB-Micro_Datasheet_en_14.odt All trademarks are reserved by their respective owners.
esd electronic system design gmbh Phone: +49 (0) 511 3 72 98-0
Vahrenwalder Str. 207 Fax: +49 (0) 511 3 72 98-68
30165 Hannover / Germany E-mail: [email protected]
