5582 Mink Segment for pdf 9/14/04 11:26 AM Page 6

Mink Vacuum Systems

®
5582 Mink Segment for pdf 9/14/04 11:26 AM Page 1

Busch Mink Vacuum Systems

Description
Busch Mink vacuum systems use the advanced
technology of a non-contacting, oil-free, rotary
claw design for outstanding reliability and low
cost of ownership. Mink systems are available
in a variety of vertical and horizontal
configurations and are designed for easy
expansion using mechanical and electrical
expansion modules.
The Busch Mink is a rotary claw-type, positive
displacement, dry pump designed for either
pressure or vacuum applications. The Mink is
available as a single-stage or two-stage
vacuum pump. Vacuum or pressure is
produced by two non-contacting rotors in an
oil-free pumping chamber. The dry, non-
contacting design, along with quality
construction, results in a system that offers
extremely high reliability and a long pump life
with low maintenance.

Duplex Vertical Tank Mounted

Lab System

Mink MI Mink MM

Busch Advantages
• Expandable systems with easy-to-install • Nationwide service network
mechanical and electrical modules
• On-time production and delivery
• Proven reliable pump designs
• Dry systems eliminate expense of water use
• Low cost of ownership and disposal
• ISO 9001 Registered Company • Backup pump eliminates downtime
• Lower operation and energy costs • Easy access for servicing
• Dedicated engineering support
5582 Mink Segment for pdf 9/14/04 11:26 AM Page 2

Systems Configurations and Sizes

OTMS Systems – with Motor Control Center
Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches)
OTMS-1-MM1104 1.5 40 40 120 70x27x52
OTMS-1-MM1144 2.2 53 53 120 70x27x53
OTMS-1-MM1102 3.0 74 74 200 73x31x61
OTMS-1-MM1142 4.0 97 97 200 73x31x61
OTMS-1-MM1202 4.8 135 135 200 73x35x62
OTMS Horizontal Tank OTMS-1-MM1252 5.5 165 165 200 73x35x62
Mounted Simplex DVET
OTMS-1-MM1322 6.5 200 200 200 73x35x62 Vertically Expandable
OTMS-1-MI1352 7.5 216 216 200 73x40x71 Triplex
OTMS-1-MI1502 11.2 325 325 200 73x40x76

ATMD Systems – with Duplex Motor Control Center

Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches)
ATMD-2-MM1104 1.5 40 80 120 70x39x60
ATMD-2-MM1144 2.2 53 106 120 70x39x60
ATMD-2-MM1102 3.0 74 148 200 73x41x68
ATMD ATMD-2-MM1142 4.0 97 194 200 73x41x68
Tank Mounted Duplex

Horizontally Expandable
OVTMS Systems – with Motor Control Center OHES Simplex
Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches) DHED Duplex
OVTMS-1-MM1104 1.5 40 40 120 44x32x74 DHET Triplex
OVTMS-1-MM1144 2.2 53 53 120 44x32x75
OVTMS-1-MM1102 3.0 74 74 120 44x32x75
OVTMS Vertical OVTMS-1-MM1142 4.0 97 97 120 44x32x75
Tank Mounted Simplex

OVES Systems – with Motor Control Center

Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches) BMV
OVES-1-MM1104 1.5 40 40 120 61x52x85 Mobile Simplex
OVES-1-MM1144 2.2 53 53 120 61x52x85
OVES-1-MM1102 3.0 74 74 200 61x52x89
OVES-1-MM1142 4.0 97 97 200 61x52x89
OVES-1-MM1202 4.8 135 135 200 61x52x89
OVES OVES-1-MM1252 5.5 165 165 200 61x52x89
Vertically Expandable OVES-1-MM1322 6.5 200 200 200 61x52x89
Simplex OVES-1-MI1352 7.5 216 216 200 84x66x89
OVES-1-MI1502 11.2 325 325 200 84x66x89

DVED Systems – with Duplex Motor Control Center

Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches)
DVED-2-MM1104 1.5 40 80 120 66x53x85
DVED-2-MM1144 2.2 53 106 120 66x53x85
DVED-2-MM1102 3.0 74 148 200 69x53x89
DVED-2-MM1142 4.0 97 194 200 69x53x89
DVED-2-MM1202 4.8 135 270 200 69x53x89
DVED DVED-2-MM1252 5.5 165 330 200 69x53x89
Vertically Expandable DVED-2-MM1322 6.5 200 400 200 69x53x89
Duplex DVED-2-MI1352 7.5 216 432 200 92x67x89
DVED-2-MI1502 11.2 325 650 200 92x67x89

Expansion Modules
For Busch Mink systems that are expandable,
mechanical and electrical expansion modules simplify
conversion by including easy-to-install mechanical
components, electrical components, and updated
programming for motor control centers.
 5582 Mink Segment for pdf 9/14/04 11:26 AM Page 3

DVET Systems – with Triplex Motor Control Center

Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches)
DVET-3-MM1104 1.5 40 120 120 66x53x85
DVET-3-MM1144 2.2 53 159 120 66x53x85
DVET-3-MM1102 3.0 74 222 200 66x53x85
DVET-3-MM1142 4.0 97 291 200 66x53x85
DVET-3-MM1202 5.5 135 405 200 66x53x85
DVET-3-MM1252 5.5 165 495 200 66x53x85
dable DVET-3-MM1322 6.5 200 600 200 69x53x90
DVET-3-MI1352 7.5 216 648 200 135x67x89
DVET-3-MI1502 11.2 325 975 200 135x67x89

OHES Systems – with Motor Control Center Mink System Advantages

Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches) • Lower overall energy use than
OHES-1-MI1352 7.5 216 216 200 84x66x89 individual point-of-use pumps
OHES-1-MI1502 11.2 325 325 200 84x66x89
• Heat and noise removed from point-
DHED Systems – with Duplex Motor Control Center of-use location
Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches) • Easy access for servicing
DHED-2-MI1352 7.5 216 432 200 119x67x89
DHED-2-MI1502 11.2 325 650 200 119x67x89 • Automatically alternation between
pumps for even wear
DHET Systems – with Triplex Motor Control Center • Easy modular expansion
Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches)
DHET-3-MI1352 7.5 216 648 200 158x67x89 • Backup pump eliminates downtime
DHET-3-MI1502 11.2 325 975 200 158x67x89 • Low maintenance

Mobile Vacuum Systems – with Motor Control Center

Model kW ACFM Total ACFM Tank Size (gal) LxWxH (inches)
BMV-MM1104 1.5 40 40 9 44x30x27
BMV-MM1144 2.2 53 53 9 44x30x27
BMV-MM1102 3.0 74 74 9 44x30x28
BMV-MM1142 4.0 97 97 9 44x30x28

Quadruplex Systems
All expandable systems can be expanded up to quadruplex
systems by adding mechanical and electrical expansion
modules. Systems with more than four pumps are available by
special request.

Manual Start Simplex Systems

Manual start simplex systems are available. Contact your Busch
representative for model numbers.

Laboratory Systems
All Mink systems are available as laboratory systems. Mink lab systems
have pneumatically or electrically actuated isolation valves along with a
purge arrangement. The system program includes an automatic purge
cycle. For Mink lab system model numbers, insert “LAB” in the part
number as shown in the following example.
For a Lab version of ATMD-2-MM1104, specify ATMD-2-LABMM1104.
5582 Mink Segment for pdf 9/14/04 11:26 AM Page 4

Operating Principle
Inside the pump housing, two claw shaped
rotors take in air as they rotate in opposite
directions. The air is compressed by the
rotors, then discharged through a
silencer to atmosphere.
The non-return valve
incorporated into the inlet
flange prevents air from back Cost of Ownership
flowing into the vacuum
chamber when the pump is The Busch Mink is a real
turned off. standout when comparing cost
Mink rotary claw vacuum of ownership to other pump
pumps are directly driven by
a flanged motor, and the two designs. The non-contacting
rotors are synchronized by gears. design of the Mink pumps
A wide range of accessories allows
optimum adaptation to many applications. means that the rotors do not
touch each other or the pump
housing. By not touching, no
lubrication is needed, there is
Custom Engineered Systems no power robbing friction and
Busch provides complete vacuum systems that include instrumentation, controls, there is no wear.
alarms, computer hardware and software, and other special equipment. Busch's
highly experienced application engineering staff will work with you to determine In day-to-day operations, that
which pump system configuration will meet your specific needs.
means there is no oil disposal
problems, lower energy use,
and low maintenance.

Custom Engineered Custom Engineered

Expandable Triplex System Enclosed System

Applications
• Beverage Industry • Packaging Industry • Transport and Lifting
Systems
• Central Vacuum Systems • Paper Industry
• Vacuum Sewage
• Ceramics and Brick Industry • Plastics Industry
• Wood Industry
• Environmental Technology • Pneumatic Conveying
• Hospitals
• Food Industry • Printing Industry
• Medical Technology • Textile Industry
5582 Mink Segment for pdf 9/14/04 11:26 AM Page 5

Busch - all over the world in industry

Nationwide Sales, Distribution and Service Centers

Busch, Inc
516 Viking Drive
Virginia Beach, VA 23452
Phone (757) 463-7800
FAX (757) 463-7407

www.buschpump.com

1-800-USA-PUMP

®
Strategically located regional service centers maintain a wide selection of in
stock pumps, systems, and parts and are staffed with factory trained service
technicians, who are ready to assist you with all your equipment needs.

Busch Factory Service Offers

ISO 9001 Registered Company
• Technical assistance
• Spare parts service
• Repairs on-site or in one of our service
facilities
• Maintenance training
• Replacement units
• On-site inspections
• One year repair warranty
• Fast turnaround times
• Maintenance contracts

Pump Exchange Program

With the Busch pump exchange program, a
remanufactured replacement pump with a 12
month warranty is quickly shipped to you in
exchange for your pump.

Mink System BRO-01-8/04-5M Models and specifications are subject to change without notice