Scribd
Upload
12 views

interruption points

eplan notes

Uploaded by

Schwarz Chimunhu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
12 views

interruption points

eplan notes

Uploaded by

Schwarz Chimunhu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
‘This functional is only available for certain module packages. Info / Copyright You are here: EPLAN Hop > Working with Connoctions » Connection symbols > Interrupting Connections Interrupting Connections Autoconnecting can sometimes create unwanted connections in the schematic (e.g., to motor overload switch auxiliary contacts). You can interrupt these connections by inserting a break point between the connection points. A| ‘ak point is an invisible symbol without connection points that prevents < oconnecting or that interrupts an existing autoconnect line. Precondi ns: + You have opened a project. You have opened a project page in the graphical editor. + The page contains autoconnect lines, 1, Select the Insert tab in the ribbon. 2. In the command group Symbols click the ~ (Other) button and below the Connectors field select the button “(Interrupt connection). 3, Click between the two connection points on the autoconnect line to be interrupted > The autoconnect line is interrupted, i.e., the connection is deleted, 4. Proceed in a similar way for all additional autoconnect lines that are to be interrupted 5, End the action via the Cancel action popup menu item or via the [Esc] button.

You might also like