Autodesk Inventor - 3D Modeling Tools
Autodesk Inventor - 3D Modeling Tools
Autodesk Inventor
Year 2023 Version 2022 Page 1/37
General objectives:
Work with 2D drawing tools: Line, Arc, Circle;
Apply the different types of geometric constraints and parametric dimensions;
Use 3D modeling tools: Extrude, Revolve, Chamfer, Fillet, Hole, Rib,
Rectangular Pattern, Mirror.
To start a new job, click New or CTRL+N.
Before starting a new job, let's start by setting one of the program options:
Remove Grid Lines;
Automatically project the source;
Automatically edit the Dimension;
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 2/37
To reset these options click the Tools menu and select Application Options.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 3/37
Exercise I
Right-click the browser bar on the XY plan and select New sketch.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 4/37
To start this new exercise, click and draw the following profile (in an
approximate way).
Constraints
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 5/37
The Tangent constraint defines the tangency between entities, including end
of Splines, with other entities. One entity can be tangent to another, even if it does
not physically share a point.
Makes coincident two points, or a point and an entity. When this restriction is
applied to centers of circumferences, arcs, or ellipses, the result is the same as the
Concentric constraint.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 6/37
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 7/37
Click to view the constraints imposed. Select an entity in the graphics area.
To view all constraints: Right-click on the graphics area and select Show All
Constraints or press F8.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 8/37
To hide all constraints: Right-click on the graphics area and select Hide All.
Constraints or F9.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 9/37
Click and select the indicated sketch lines for which you want to set its
alignment.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 10/37
Click to define the parametric dimensions. Select the entity or entities that
you want to scale and position the dimension.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 11/37
Click close the sketch environment or click 3D Model to access the 3D tools.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 12/37
To stop the rotation press Esc. For an isometric view: Right-click on the graphics area
and select Home View or F6 to view the isometric view of the model.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 13/37
Click , from the View menu, to view the model in Wireframe mode.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 14/37
A from the 3D Model menu, click set the chamfers on the top edges of the
model (we have to run one chamfer at a time).
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 15/37
Click and select the indicated face of the model to define a new sketch.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 16/37
Click and select the face, from the sketch plane, to guide it to the screen.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 17/37
The Join, Cut, and Intersect options specify whether extrusion is in join, subtraction,
or intersection mode with another shape. In the Feature base, you cannot access
these options:
Intersect – Creates a shape with the shared volume between the feature
to create and the rest of the template. The material not included in the
intersection is deleted. Not available in sets.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 18/37
In Output, you specify whether the shape to create, being in solid mode or a surface:
Solid - Creates a new solid from an open or closed profile. Open profiles
are not possible to select for the base feature;
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 19/37
Click the Tools menu and in Application Options select the Save tab. Turn on the Save
Reminder Timer option to receive an alert message for recording the file at set time
intervals in minutes.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 20/37
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 21/37
Exercise II
Click and draw the following profile. Click to define the parametric
dimensions.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 22/37
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 23/37
Click to set a hole center on the indicated face. In set the parametric
dimensions of the positioning of the center of the hole.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 24/37
Click to set a hole center on the indicated face. In set the parametric
dimensions of the positioning of the center of the hole.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 25/37
Click to set a through hole with a cylindrical box. The diameter of the case is
20 mm with a height of 5 mm. The diameter of the hole is 10 mm.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 26/37
In the birth of my Model, click to create a plan. Select the face against which
you want to create a parallel plane. Left-click the plane and drag it.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 27/37
Click and select the indicated plan, to guide the visualization of the model.
Click to set a match constraint between the vertex and the point below
indicated.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 28/37
Click to set a match constraint between the vertex and the point below
indicated.
Click copy linearly to the previous feature. Click Features and select the
feature to copy (Rib). Select the model's image that defines the copy direction.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 29/37
Eliminate a feature rectangular pattern. In the Browser Bar, right-click on the Feature
and select Delete.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 30/37
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 31/37
Click to set a mirror copy of the rib. Click Features and select the rib to copy.
Click Mirror Plane and select the plane that passes through the center of the model.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 32/37
Exercise III
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 33/37
Select the last segment created and select the Centerline mode.
Click to define the parametric dimensions. Select the entity or entities that
you want to scale and position the dimension. In the diameter quote, select the
Centerline as the axis reference.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 34/37
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 35/37
Select and .
Click and create a Centerline that passes through the model center.
Click to define a tangency constraint between the top line of the rectangle and
the outer circumference of the model.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 36/37
Click to define a symmetry constraint between the side lines of the rectangle
and the Centerline. Select the two side lines and the Centerline.
E-mail:[email protected]
Tutorials
Autodesk Inventor
Year 2023 Version 2022 Page 37/37
Click to define a cut extrusion. Select the option and All mode for cutting
to cross the entire model.
E-mail:[email protected]