Scribd
Upload
140 views3 pages

Sae 1008.material Specification Sheet

Uploaded by

edson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
140 views3 pages

Sae 1008.material Specification Sheet

Uploaded by

edson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

MATERIAL

SPECIFICATION SHEET
GRADE: SAE 1008

Material nº: Other references:

No: 1.9325 ISO 683-4

Tipo de acero –
Equivalencia norma - Steel type:
Standard Reference:

ASTM A29/A29M Mesh quality

Aplicación - Application:

Wire rod with a very low Carbon used for many applications as follows:
Thin, annealed, grey and galvanised wires for agricultural and commercial uses.
Bright wire andbars for coating bt chrome plating, nickel plating, electrolytic zon coating, painting.
Industrial and paper staples
Normal and special nails and for automatic nailing
Barbed wire, metal mesh and fencing
Industrial wires, shapped parts for automobiles

Composición química (%) - Chemical composition (%):

Element Min Max

%C 0,08

%Mn 0,30 1,50

%Si 0,30
%P 0,040

%S 0,050

Material Specefication Shett


Característica mecánicas bruto - Mechanical characteristics (As rolled)

Tolerancias dimensionales - Dimensional tolerances

Calidad superficial - Surface quality

Dimensiones y peso del rollo –


Coil dimensións and coil weight

3100 kg or 2600 kg aprox. and half coils packed together of 1650 kg or 1300 kg aprox.
Each coil tied minimum with four strips

Stelmor line (rod sizes from 5.5 up to 24.0 mm)

Coil weight Coil length Inner diameter Outer diameter


(kg) aprox. (mm) aprox. (mm) aprox. (mm) aprox.

2600 1800 800 1250

3100 2000 800 1250

Note: when cutting the coil ties, the length can be increased significantly.

Stelmor line: Half coils

Coil weight Coil length Inner diameter Outer diameter


(kg) aprox. (mm) aprox. (mm) aprox. (mm) aprox.

1300 900 800 1250

1550 1000 800 1250

Note: half coils are delivered in bundles of two coils packed together.

Material Specefication Shett


Hot coiling line (rod sizes from 25.0 up to 52.0 mm)

Coil weight Coil length Inner diameter Outer diameter


(kg) aprox. (mm) aprox. (mm) aprox. (mm) aprox.

2600 1700 880 1300

3100 1800 880 1300

Note: when cutting the coil ties, the length should not have a significant increase.
Other coil weights could be made, if customer needs.

Material Specefication Shett

You might also like