Network Analysis- BEC304

Module 1 Basic Concepts

Source Transformation
1. In the circuit below, use a source transformation to determine vo.

2. For the circuit shown in Figure, use a source transformation to determine vo.

3. For the circuit shown in Figure determine the V0 using source transformation.

4. In the circuit shown in Figure determine the current i1 through 5Ω resistor by

source transformation.

5. In the circuit shown in Figure determine current I by source transformation.

Dept of ECE, Canara Engineering College 2023-24 1

 Network Analysis- BEC304

6. In the circuit shown in Figure determine the voltage v0 across 100 Ω resistor

7. In the circuit shown in Figure determine the current in the 12 Ω resistor using
source transformation method

8. In the circuit shown in Figure determine the current in the 3 Ω resistor using source
transformation method

9. In the circuit shown in Figure determine the current Ix using source transformation
method

10. In the circuit shown in Figure determine the current Ix using source transformation
method

Dept of ECE, Canara Engineering College 2023-24 2

 Network Analysis- BEC304

11. In the circuit shown in Figure determine the current i1

12. Using source transformation technique find the current through 5 Ω resistor for the
circuit shown in Figure

13. Use source transformation to convert as shown in Figure to a single current source in
parallel with single resistor

14. Calculate the current through 2 Ω resistor for the circuit as shown in Figure using
source transformation

15. Using source transformation find the current through RL in the circuit as shown in
Figure

Dept of ECE, Canara Engineering College 2023-24 3

 Network Analysis- BEC304

16. Using source transformation find the power delivered by 50 V source i given network
of as shown in Figure

17. Use source shifting and transformation techniques to find voltage across 2 resistor as
shown in Figure

18. Use source shifting and transformation techniques to find voltage across a; b resistor
as shown in Figure

19. Use source shifting and transformation techniques to find voltage across a; b resistor
as shown in Figure

Dept of ECE, Canara Engineering College 2023-24 4

 Network Analysis- BEC304

20. Use source shifting and transformation techniques to find voltage across a; b resistor
as shown in Figure

21. Reduce the network shown in Figure to a single voltage source in series with a
resistance using source shift and source transformations.

22. Apply source transformation and shifting method to reduce the network shown in
Figure to a single voltage source in series with a resistance.

23. Apply source transformation and shifting method to reduce the network shown in
Figure to a single voltage source in series with a resistance.

Dept of ECE, Canara Engineering College 2023-24 5

 Network Analysis- BEC304

Star Delta Transformation

1. Determine the Input resistance between PQ using star-delta transformation

2. For the circuit shown in Figure shown in Figure determine the equivalent resistance
between any two terminals.

3. For the circuit shown in Figure shown in Figure determine the equivalent resistance
between (1)A and B and (2) A and N

4. Determine the equivalent resistance between terminals A and B

Dept of ECE, Canara Engineering College 2023-24 6

 Network Analysis- BEC304

5. Find the resistance of the circuit shown in Figure shown in Figure between A and B

6. For the circuit shown in Figure shown in Figure determine the current i using star delta
transformation.

7. Calculate the current in the 40 resistance of the circuit shown in Figure using star delta
transformation.

8. Determine the currents supplied by the each battery using star-delta transformation

Dept of ECE, Canara Engineering College 2023-24 7

 Network Analysis- BEC304

9. Find the equivalent resistance between A and B as shown in Figure

10. Find the equivalent resistance between a and b as shown in Figure using star delta
transformation

11. Determine the resistance between A and B of the network shown in Figure

12. Determine the resistance between A and B of the network shown in Figure

Dept of ECE, Canara Engineering College 2023-24 8

 Network Analysis- BEC304

13. Using star/delta transformation determine the resistance between M and N of the network
shown in Figure

14. Find the equivalent resistance between A and B of the network shown in Figure using Star-
Delta transformation.

15. Using star/delta transformation determine the resistance between M and N of the network
shown in Figure

16. Using star/delta transformation determine the resistance between M and N of the network
shown in Figure

Dept of ECE, Canara Engineering College 2023-24 9

 Network Analysis- BEC304

17. Using star/delta transformation determine the resistance between A and B of the network
shown in Figure

18. Using star/delta transformation determine the resistance between A and B of the network
shown in Figure

Mesh Analysis
1. In the circuit shown in Figure determine all branch currents and the voltage
across the 5Ω resistor by loop current analysis.

2. In the circuit shown in Figure determine the mesh currents i1; i2; i3

Dept of ECE, Canara Engineering College 2023-24 10

 Network Analysis- BEC304

3. In the circuit shown in Figure determine all branch currents by mesh current
analysis.

4. In the circuit shown in Figure determine the current Ix

5. In the circuit shown in Figure determine all branch currents by mesh current
analysis.

6. In the circuit shown in Figure determine all branch currents by mesh current
analysis.

Dept of ECE, Canara Engineering College 2023-24 11

 Network Analysis- BEC304

7. In the circuit shown in Figure determine the current I by mesh current analysis.

8. Find the loop currents i1; i2; i3 in the circuit shown in Figure

9. In the circuit shown in Figure determine the current through 2 Ω resistor.

10. In the circuit shown in Figure determine the current Ix

Dept of ECE, Canara Engineering College 2023-24 12

 Network Analysis- BEC304

11. In the circuit shown in Figure determine the current Ix

12. In the circuit shown in Figure determine the current Ix

13. In the circuit shown in Figure determine all the loop currents

14. In the circuit shown in Figure determine the all the mesh currents

15. In the circuit shown in Figure determine the current Ix

Dept of ECE, Canara Engineering College 2023-24 13

 Network Analysis- BEC304

16. Use loop analysis to find Vx in the circuit shown in Figure such that the current
through 2+j3 Ω is zero.

17. Use loop analysis to find Vx in the circuit shown in Figure such that the current
through 8+j8 Ω is zero.

18. Use mesh analysis determine the current I1; I2; I3 as shown in Figure

19. Using mesh analysis determine the current I1; I2; I3 shown in Figure

Dept of ECE, Canara Engineering College 2023-24 14

 Network Analysis- BEC304

20. Determine the loop currents I1, I2, I3 and I4 for the network shown in Figure

21. Find the voltage across 20 Ω resistor in the network shown in Figure by mesh
analysis.

22. Use mesh analysis to determine the three mesh currents i1; i2; i3 as shown in
Figure

Dept of ECE, Canara Engineering College 2023-24 15

 Network Analysis- BEC304

23. Using mesh current method find current through 10 Ω resistor in the network
shown in Figure

24. For the circuit shown in Figure find the power supplied 10 V source using mesh
analysis.

25. Find the power delivered by the dependent voltage source in the circuit shown
in Figure by mesh analysis.

26. Use mesh analysis to determine the three mesh currents i1; i2; i3 also determine
the voltage drop across 2 Ω for the circuit shown in Figure

Dept of ECE, Canara Engineering College 2023-24 16

 Network Analysis- BEC304

27. Use mesh analysis to determine the mesh currents i1; i2; i3; i4 for the circuit
shown in Figure

NODE Analysis
1. In the circuit shown in Figure determine all branch currents by node analysis.

2. In the circuit shown in Figure determine all branch currents and the voltage
across the 5Ω resistor by node analysis.

3. In the circuit shown in Figure determine all branch currents and the voltage
across the 5Ω resistor by node analysis.

Dept of ECE, Canara Engineering College 2023-24 17

 Network Analysis- BEC304

4. In the circuit shown in Figure determine the current Ix

5. Find the loop currents i1; i2; i3 in the circuit shown in Figure

6. In the network shown in Figure find the node voltages using nodal analysis

7. In the network shown in Figure find the node voltages using nodal analysis

Dept of ECE, Canara Engineering College 2023-24 18

 Network Analysis- BEC304

8. In the network shown in Figure find the current I by node voltage method.

9. In the network shown in Figure find the value of E2 such that current through
the 8+j8 Ω is zero.

10. In the network shown in Figure find the value of E2 such that current through
the 2+j3 Ω is zero.

11. In the network shown in Figure find the value of V2 using nodal analysis

Dept of ECE, Canara Engineering College 2023-24 19

 Network Analysis- BEC304

12. In the circuit shown in Figure determine the node voltages

13. In the circuit shown in Figure determine the node voltages

14. In the circuit shown in Figure determine the node voltages

Dept of ECE, Canara Engineering College 2023-24 20

 Network Analysis- BEC304

15. In the circuit shown in Figure determine the node voltages V1; V2; V3; V4

16. In the circuit shown in Figure determine the node voltages

17. In the circuit shown in Figure determine the node voltages and also current Io
using nodal analysis

Dept of ECE, Canara Engineering College 2023-24 21

 Network Analysis- BEC304

18. In the circuit shown in Figure determine all the node voltages using nodal
analysis

19. In the circuit shown in Figure determine all the node voltages using nodal
analysis

20. In the circuit shown in Figure determine all the node voltages using nodal
analysis

21.

Dept of ECE, Canara Engineering College 2023-24 22

 Network Analysis- BEC304

22.

23.

Dept of ECE, Canara Engineering College 2023-24 23