Scribd
Upload
5 views2 pages

Ac Tutorial 5

Uploaded by

harish_gopadi4671
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
5 views2 pages

Ac Tutorial 5

Uploaded by

harish_gopadi4671
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

COUR

SUBJE
SE: II
CT:
DEPARTMENT: ECE B.TEC
Analog
H
Circuits
II SEM
MALLA REDDY ENGINEERING COLLEGE FOR
WOMEN
(Autonomous Institution – UGC Govt. of India)
Permanently Affiliated to JNTUH, Approved by AICTE,
Accredited by NBA and NAAC with A grade– ISO 9001-2015Certified

COURSE: II B.TECH SUBJECT:


DEPARTMENT: ECE
II SEM Analog Circuits

UNIT - V R20 REGULATION 2021-2022

NIRF India Ranking 2018, Accepted by MHRD, GOVT, of India, AAA+ Rated by
CAREER 360

TUTORIAL SHEET-5

1.A power amplifier supplies 3w to a load of 6K.The zero signal d.c collector current in
55mA and the collector current with signal in 60mA.How much is the
percentage in second harmonic distortion
2.A classB , push pull amplifier drives a load on 16, connected to the second ary of the ideal
transformer.The supply voltage in 25V.If the turns on the primary in 200 and the no .of
turns the secondary in 50,Calculate maximum power o/p,
d.c power input, efficiency and maximum power dissipation per transistor.
3.In a class B complementary power amplifier Vcc=+15V, -Vcc=15V and RL=4Ω.
Calculate
i. Maximum a.c power which can be developed
ii. Collector dissipation while develop ing maximum a.c power
iii. efficiency
iv. maximum power dissipation per transistor
4. A series fed classAamplifier uses a supplyvoltage of 10V and load resistance of 20Ω.The a.c
input voltage results in a base current of 4Ma peak.Calculate
i. d.c input power
ii. a.c output power
iii. %efficiency
5.What is the Junction to ambient Thermal Resistance for a device dissipating 600
Mw into an ambient temperature of 500C and operating at a junction temperature of
1100C?
6.Calculate the transformer turns ratio required to match a 8Ω speaker load to a n
amplifier so that the effective load resistance is 3.2 K Ω
In complementary-symmetryclass-B power amplifier circuit,VCC=25Volts, RL=16and
Imax=2Amps.Determine the input power,output power and
efficiency.

7.What Is the junction to ambient thermal resistance for a device dissipating 600
mW into an ambient of 60° Can operating at a junctiontemperatureof120°C.
8.Design a classA power amplifier to deliver 5Vrms to a load of 8Ohms using a transfor
mer coupling.Assume that a supply of 12V is available.The resistance of
the primary winding of the transformer also should be considered.
Signature of HOD Signature of Faculty
Date: Date

You might also like