Full Hydraulic Calculations Computer Printout Page No 1

Submitted by user number Project: XL-02

Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Project Data and Design Parameters

Project name : XL-02
Area reference : Most Unfavourable
Address / location : HCM
Project number : 0552024
Installation number(s) : 1
Drawing number(s) : ---
Issue no / date : ---
Designers reference : ---
Project Data File : C:\fhc\XL02 FHC.FHC
Hazard classification : Domestic
Design authority : National Fire Protection Association
Insurance company : ---
Specified density of discharge : 0.00 mm/min (l/min/m2)
Assumed maximum area of operation : 0.00 m2
Number of operating sprinkler heads : 1 + 2 hydrant(s)
Maximum area covered per head : 0.00 m2
Highest head / nozzle above source : 0.00 m
Number of pipes in system : 141 from 65 to 150 mm
Pressure loss equation used : Hazen-Williams
Fluid : Water
Pipe Data Table : STD_PIPE.PDT
Maximum fluid velocity : 2.30 m/s in pipe 690 700
Volume of pipework and fittings : 50.46 m3
Elbows are welded for : 0 mm and above
Comment : ---
Checked by & Date :

Source duty = 1800.0 l/min @ 3.011 bar at node no 100

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 2
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Operating Sprinkler Heads, Nozzles and Hydrants

Head|Node| Size | 'K' |F l o w|A r e a|Density mm/min|Pressure bar|Heights|Pipe
no | no | mm | factor| l/min | m2 |Req.d Actual| Min Actual| m | no
1 710 758.95 1200.0 0.000 0.00 0.00 2.50 2.500 1.500 56
1630 300.0 Hydrant 2.153 2.050 138
1660 300.0 Hydrant 2.153 2.050 141

0 heads are under the required density / minimum pressures

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 3
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Hydraulically Significant Pipes in System

NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
1 100 150mm MW 1800.0 4.000 Up 4.00 0.000 3.011 -0.008
110 155.32 120 1.6 0 0 90.0 1.9 4.000 2.612 -0.392
2 110 150mm MW 600.0 0.200 0 9.71 4.000 2.612 -0.002
120 155.32 120 0.5 0 1 0.0 0.3 4.000 2.609 +0.000
3 110 150mm MW 1200.0 0.200 180 9.71 4.000 2.612 -0.009
130 155.32 120 1.1 0 1 0.0 0.9 4.000 2.603 +0.000
4 130 150mm MW 643.5 0.400 180 0.40 4.000 2.603 -0.000
160 155.32 120 0.6 0 0 0.0 0.3 4.000 2.603 +0.000
5 160 150mm MW 643.5 2.000 270 4.85 4.000 2.603 -0.001
210 155.32 120 0.6 1 0 0.0 0.3 4.000 2.601 +0.000
6 130 150mm MW 556.5 2.000 270 11.51 4.000 2.603 -0.003
220 155.32 120 0.5 0 1 0.0 0.2 4.000 2.600 +0.000
7 120 150mm MW 278.5 2.000 270 11.51 4.000 2.609 -0.001
230 155.32 120 0.2 0 1 0.0 0.1 4.000 2.608 +0.000
8 120 150mm MW 321.5 0.400 0 0.40 4.000 2.609 -0.000
240 155.32 120 0.3 0 0 0.0 0.1 4.000 2.609 +0.000
9 240 150mm MW 321.5 2.000 270 4.85 4.000 2.609 -0.000
250 155.32 120 0.3 1 0 0.0 0.1 4.000 2.609 +0.000
10 250 150mm MW 321.5 4.000 Dn 6.85 4.000 2.609 -0.001
260 155.32 120 0.3 1 0 -90.0 0.1 0.000 3.000 +0.392
11 230 150mm MW 278.5 4.000 Dn 6.85 4.000 2.608 -0.000
270 155.32 120 0.2 1 0 -90.0 0.1 0.000 3.000 +0.392
12 220 150mm MW 556.5 4.000 Dn 6.85 4.000 2.600 -0.002
280 155.32 120 0.5 1 0 -90.0 0.2 0.000 2.991 +0.392
13 210 150mm MW 643.5 4.000 Dn 6.85 4.000 2.601 -0.002
290 155.32 120 0.6 1 0 -90.0 0.3 0.000 2.991 +0.392
14 290 150mm MW 643.5 20.348 270 28.91 0.000 2.991 -0.008
300 155.32 120 0.6 3 0 0.0 0.3 0.000 2.983 +0.000
15 270 150mm MW 278.5 20.748 270 44.52 0.000 3.000 -0.003
310 155.32 120 0.2 5 1 0.0 0.1 0.000 2.997 +0.000
16 280 150mm MW 556.5 20.348 270 38.41 0.000 2.991 -0.008
320 155.32 120 0.5 3 1 0.0 0.2 0.000 2.982 +0.000
17 260 150mm MW 321.5 20.748 270 35.01 0.000 3.000 -0.003
330 155.32 120 0.3 5 0 0.0 0.1 0.000 2.997 +0.000
18 300 125mm MW 203.1 0.400 0 9.80 0.000 2.983 -0.001
320 133.85 120 0.2 0 1 0.0 0.1 0.000 2.982 +0.000
19 330 125mm MW 25.2 0.400 180 9.80 0.000 2.997 -0.000
310 133.85 120 0.0 0 1 0.0 0.0 0.000 2.997 +0.000

Continued on the next page

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 4
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Hydraulically Significant Pipes in System

NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
20 300 125mm MW 440.4 8.224 180 17.62 0.000 2.983 -0.005
340 133.85 120 0.5 0 1 0.0 0.3 0.000 2.978 +0.000
21 310 125mm MW 303.7 9.424 180 9.42 0.000 2.997 -0.001
350 133.85 120 0.4 0 0 0.0 0.1 0.000 2.996 +0.000
22 340 125mm MW 440.4 2.576 90 5.58 0.000 2.978 -0.002
360 133.85 120 0.5 1 0 0.0 0.3 0.000 2.976 +0.000
23 350 125mm MW 303.7 2.577 90 5.59 0.000 2.996 -0.001
370 133.85 120 0.4 1 0 0.0 0.1 0.000 2.995 +0.000
24 360 125mm MW 440.4 51.039 180 54.05 0.000 2.976 -0.016
380 133.85 120 0.5 1 0 0.0 0.3 0.000 2.960 +0.000
25 370 125mm MW 303.7 51.039 180 54.05 0.000 2.995 -0.008
390 133.85 120 0.4 1 0 0.0 0.1 0.000 2.987 +0.000
26 380 125mm MW 440.4 92.688 90 105.85 0.000 2.960 -0.031
400 133.85 120 0.5 1 1 GV 0.0 0.3 0.000 2.929 +0.000
27 390 125mm MW 303.7 42.100 90 45.86 0.000 2.987 -0.007
1670 133.85 120 0.4 1 0 GV 0.0 0.1 0.000 2.980 +0.000
28 1670 125mm MW 303.7 51.387 90 52.14 0.000 2.980 -0.008
410 133.85 120 0.4 0 0 GV 0.0 0.1 0.000 2.972 +0.000
29 400 125mm MW 198.4 25.068 0 43.49 0.000 2.929 -0.003
420 133.85 120 0.2 3 1 0.0 0.1 0.000 2.926 +0.000
30 410 125mm MW 303.7 25.332 0 37.37 0.000 2.972 -0.006
430 133.85 120 0.4 4 0 0.0 0.1 0.000 2.967 +0.000
31 430 125mm MW 303.7 8.805 45 8.81 0.000 2.967 -0.001
450 133.85 120 0.4 0 0 0.0 0.1 0.000 2.966 +0.000
32 420 125mm MW 198.4 9.136 45 9.14 0.000 2.926 -0.001
470 133.85 120 0.2 0 0 0.0 0.1 0.000 2.925 +0.000
33 470 125mm MW 198.4 3.516 90 3.52 0.000 2.925 -0.000
480 133.85 120 0.2 0 0 0.0 0.1 0.000 2.925 +0.000
34 450 125mm MW 303.7 3.750 90 3.75 0.000 2.966 -0.001
490 133.85 120 0.4 0 0 0.0 0.1 0.000 2.965 +0.000
35 490 125mm MW 303.7 5.683 0 8.69 0.000 2.965 -0.001
500 133.85 120 0.4 1 0 0.0 0.1 0.000 2.964 +0.000
36 480 125mm MW 198.4 5.683 0 8.69 0.000 2.925 -0.001
510 133.85 120 0.2 1 0 0.0 0.1 0.000 2.924 +0.000
37 510 125mm MW 198.4 84.667 90 135.81 0.000 2.924 -0.009
520 133.85 120 0.2 17 0 0.0 0.1 0.000 2.915 +0.000
38 500 125mm MW 303.7 84.667 90 135.81 0.000 2.964 -0.020
530 133.85 120 0.4 17 0 0.0 0.1 0.000 2.944 +0.000

Continued on the next page

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 5
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Hydraulically Significant Pipes in System

NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
39 520 125mm MW 198.4 4.870 0 7.88 0.000 2.915 -0.001
540 133.85 120 0.2 1 0 0.0 0.1 0.000 2.915 +0.000
40 530 125mm MW 303.7 4.870 0 7.88 0.000 2.944 -0.001
550 133.85 120 0.4 1 0 0.0 0.1 0.000 2.942 +0.000
41 550 125mm MW 303.7 38.053 90 62.87 0.000 2.942 -0.009
560 133.85 120 0.4 8 0 GV 0.0 0.1 0.000 2.933 +0.000
42 540 125mm MW 198.4 38.853 90 63.67 0.000 2.915 -0.004
570 133.85 120 0.2 8 0 GV 0.0 0.1 0.000 2.910 +0.000
43 570 125mm MW 440.4 16.542 0 26.70 0.000 2.910 -0.008
590 133.85 120 0.5 0 1 GV 0.0 0.3 0.000 2.903 +0.000
44 560 125mm MW 303.7 17.342 0 20.35 0.000 2.933 -0.003
600 133.85 120 0.4 1 0 0.0 0.1 0.000 2.930 +0.000
45 570 125mm MW -241.9 42.081 180 51.48 0.000 2.910 +0.005
610 133.85 120 0.3 0 1 0.0 0.1 0.000 2.915 +0.000
46 610 125mm MW -241.9 133.496 270 136.50 0.000 2.915 +0.013
400 133.85 120 0.3 1 0 0.0 0.1 0.000 2.929 +0.000
47 590 125mm MW 440.4 43.620 90 46.63 0.000 2.903 -0.014
620 133.85 120 0.5 1 0 0.0 0.3 0.000 2.889 +0.000
48 600 125mm MW 303.7 43.620 90 46.63 0.000 2.930 -0.007
630 133.85 120 0.4 1 0 0.0 0.1 0.000 2.923 +0.000
49 630 125mm MW 303.7 30.916 0 42.95 0.000 2.923 -0.006
640 133.85 120 0.4 4 0 0.0 0.1 0.000 2.917 +0.000
50 620 125mm MW 440.4 30.916 0 52.35 0.000 2.889 -0.015
650 133.85 120 0.5 4 1 0.0 0.3 0.000 2.873 +0.000
51 640 125mm MW 303.7 168.866 90 238.81 0.000 2.917 -0.035
660 133.85 120 0.4 23 0 GV 0.0 0.1 0.000 2.881 +0.000
52 650 125mm MW 567.3 168.866 90 245.20 0.000 2.873 -0.116
670 133.85 120 0.7 22 1 GV 0.0 0.5 0.000 2.758 +0.000
53 660 125mm MW 303.7 36.903 0 66.99 0.000 2.881 -0.010
680 133.85 120 0.4 10 0 0.0 0.1 0.000 2.871 +0.000
54 670 125mm MW 567.3 50.077 0 80.16 0.000 2.758 -0.038
690 133.85 120 0.7 10 0 0.0 0.5 0.000 2.720 +0.000
55 690 100mm MW 1200.0 1.400 270 8.38 0.000 2.720 -0.051
700 105.14 120 2.3 0 1 0.0 6.1 0.000 2.669 +0.000
56 700 100mm MW 1200.0 1.500 Up 3.59 0.000 2.669 -0.022
710 105.14 120 2.3 1 0 90.0 6.1 1.500 2.500 -0.147
57 680 80mm MW 600.0 12.538 270 17.95 0.000 2.871 -0.110
720 80.68 120 2.0 0 1 0.0 6.2 0.000 2.761 +0.000

Continued on the next page

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 6
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Hydraulically Significant Pipes in System

NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
58 680 125mm MW -296.3 51.277 0 75.34 0.000 2.871 +0.011
730 133.85 120 0.4 8 0 0.0 0.1 0.000 2.882 +0.000
59 690 125mm MW -632.7 38.935 0 63.00 0.000 2.720 +0.036
740 133.85 120 0.7 8 0 0.0 0.6 0.000 2.756 +0.000
60 730 125mm MW -296.3 167.468 270 189.28 0.000 2.882 +0.027
750 133.85 120 0.4 7 0 GV 0.0 0.1 0.000 2.909 +0.000
61 740 125mm MW -632.7 167.468 270 188.53 0.000 2.756 +0.109
760 133.85 120 0.7 7 0 0.0 0.6 0.000 2.865 +0.000
62 750 125mm MW -296.3 75.982 180 88.02 0.000 2.909 +0.012
770 133.85 120 0.4 4 0 0.0 0.1 0.000 2.921 +0.000
63 760 125mm MW -229.6 76.732 180 95.91 0.000 2.865 +0.008
780 133.85 120 0.3 3 1 GV 0.0 0.1 0.000 2.874 +0.000
64 760 125mm MW -403.0 6.474 0 15.87 0.000 2.865 +0.004
790 133.85 120 0.5 0 1 0.0 0.3 0.000 2.869 +0.000
65 780 125mm MW -229.6 1.398 270 7.41 0.000 2.874 +0.001
800 133.85 120 0.3 2 0 0.0 0.1 0.000 2.874 +0.000
66 800 125mm MW 127.0 12.280 180 27.70 0.000 2.874 -0.001
650 133.85 120 0.2 2 1 0.0 0.0 0.000 2.873 +0.000
67 800 125mm MW -356.6 1.844 270 1.84 0.000 2.874 +0.000
810 133.85 120 0.4 0 0 0.0 0.2 0.000 2.875 +0.000
68 770 125mm MW -296.3 3.234 270 9.25 0.000 2.921 +0.001
820 133.85 120 0.4 2 0 0.0 0.1 0.000 2.923 +0.000
69 810 125mm MW -356.6 1.598 180 7.61 0.000 2.875 +0.002
830 133.85 120 0.4 2 0 0.0 0.2 0.000 2.876 +0.000
70 820 125mm MW -296.3 1.598 180 7.61 0.000 2.923 +0.001
840 133.85 120 0.4 2 0 0.0 0.1 0.000 2.924 +0.000
71 840 125mm MW -296.3 112.924 270 130.97 0.000 2.924 +0.019
850 133.85 120 0.4 6 0 0.0 0.1 0.000 2.942 +0.000
72 830 125mm MW -356.6 113.715 270 131.76 0.000 2.876 +0.026
860 133.85 120 0.4 6 0 0.0 0.2 0.000 2.902 +0.000
73 860 125mm MW -356.6 8.577 0 15.35 0.000 2.902 +0.003
870 133.85 120 0.4 2 0 GV 0.0 0.2 0.000 2.905 +0.000
74 850 125mm MW -296.3 8.577 0 15.35 0.000 2.942 +0.002
880 133.85 120 0.4 2 0 GV 0.0 0.1 0.000 2.945 +0.000
75 870 125mm MW -356.6 23.585 270 29.60 0.000 2.905 +0.006
890 133.85 120 0.4 2 0 0.0 0.2 0.000 2.911 +0.000
76 880 125mm MW -296.3 24.685 270 27.69 0.000 2.945 +0.004
900 133.85 120 0.4 1 0 0.0 0.1 0.000 2.948 +0.000

Continued on the next page

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 7
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Hydraulically Significant Pipes in System

NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
77 890 125mm MW -381.9 5.687 180 15.09 0.000 2.911 +0.003
910 133.85 120 0.5 0 1 0.0 0.2 0.000 2.915 +0.000
78 890 125mm MW 25.3 24.829 0 34.23 0.000 2.911 -0.000
920 133.85 120 0.0 0 1 0.0 0.0 0.000 2.911 +0.000
79 910 125mm MW -381.9 2.937 225 2.94 0.000 2.915 +0.001
940 133.85 120 0.5 0 0 0.0 0.2 0.000 2.915 +0.000
80 900 125mm MW -296.3 5.871 180 8.88 0.000 2.948 +0.001
950 133.85 120 0.4 1 0 0.0 0.1 0.000 2.950 +0.000
81 950 125mm MW -296.3 2.605 225 2.61 0.000 2.950 +0.000
970 133.85 120 0.4 0 0 0.0 0.1 0.000 2.950 +0.000
82 940 125mm MW -381.9 6.811 270 6.81 0.000 2.915 +0.002
980 133.85 120 0.5 0 0 0.0 0.2 0.000 2.917 +0.000
83 970 125mm MW -296.3 6.480 270 6.48 0.000 2.950 +0.001
990 133.85 120 0.4 0 0 0.0 0.1 0.000 2.951 +0.000
84 990 125mm MW -296.3 1.648 315 1.65 0.000 2.951 +0.000
1010 133.85 120 0.4 0 0 0.0 0.1 0.000 2.951 +0.000
85 980 125mm MW -381.9 1.648 315 1.65 0.000 2.917 +0.000
1030 133.85 120 0.5 0 0 0.0 0.2 0.000 2.917 +0.000
86 1010 125mm MW -296.3 60.854 270 76.65 0.000 2.951 +0.011
1040 133.85 120 0.4 5 0 GV 0.0 0.1 0.000 2.962 +0.000
87 1030 125mm MW -381.9 61.088 270 76.13 0.000 2.917 +0.017
1050 133.85 120 0.5 5 0 0.0 0.2 0.000 2.935 +0.000
88 1050 125mm MW -430.3 1.512 180 11.67 0.000 2.935 +0.003
1060 133.85 120 0.5 0 1 GV 0.0 0.3 0.000 2.938 +0.000
89 1060 125mm MW -430.3 0.827 225 0.83 0.000 2.938 +0.000
1080 133.85 120 0.5 0 0 0.0 0.3 0.000 2.938 +0.000
90 1080 125mm MW -430.3 13.432 270 13.43 0.000 2.938 +0.004
1090 133.85 120 0.5 0 0 0.0 0.3 0.000 2.942 +0.000
91 1090 125mm MW -430.3 1.414 315 1.41 0.000 2.942 +0.000
1110 133.85 120 0.5 0 0 0.0 0.3 0.000 2.942 +0.000
92 1110 125mm MW -430.3 40.374 270 71.21 0.000 2.942 +0.020
1120 133.85 120 0.5 4 2 0.0 0.3 0.000 2.962 +0.000
93 920 125mm MW 25.3 0.919 45 0.92 0.000 2.911 -0.000
1140 133.85 120 0.0 0 0 0.0 0.0 0.000 2.911 +0.000
94 1140 125mm MW 25.3 13.802 0 13.80 0.000 2.911 -0.000
1150 133.85 120 0.0 0 0 0.0 0.0 0.000 2.911 +0.000
95 1150 125mm MW 25.3 0.919 315 3.93 0.000 2.911 -0.000
1170 133.85 120 0.0 1 0 0.0 0.0 0.000 2.911 +0.000

Continued on the next page

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 8
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Hydraulically Significant Pipes in System

NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
96 1170 125mm MW 25.3 38.026 0 41.79 0.000 2.911 -0.000
1180 133.85 120 0.0 1 0 GV 0.0 0.0 0.000 2.911 +0.000
97 790 125mm MW -403.0 2.516 315 8.53 0.000 2.869 +0.002
1200 133.85 120 0.5 2 0 0.0 0.3 0.000 2.871 +0.000
98 1180 125mm MW 403.0 138.763 90 160.20 0.000 2.911 -0.040
1200 133.85 120 0.5 4 1 0.0 0.3 0.000 2.871 +0.000
99 1180 125mm MW -377.8 6.802 270 16.20 0.000 2.911 +0.004
1210 133.85 120 0.4 0 1 0.0 0.2 0.000 2.915 +0.000
100 1210 125mm MW -377.8 7.143 315 7.14 0.000 2.915 +0.002
1230 133.85 120 0.4 0 0 0.0 0.2 0.000 2.916 +0.000
101 1230 125mm MW -377.8 44.738 270 44.74 0.000 2.916 +0.010
1240 133.85 120 0.4 0 0 0.0 0.2 0.000 2.926 +0.000
102 1240 125mm MW -377.8 6.522 225 6.52 0.000 2.926 +0.001
1260 133.85 120 0.4 0 0 0.0 0.2 0.000 2.928 +0.000
103 1260 125mm MW -377.8 8.696 180 11.70 0.000 2.928 +0.003
1270 133.85 120 0.4 1 0 0.0 0.2 0.000 2.930 +0.000
104 1040 125mm MW -296.3 33.292 0 36.30 0.000 2.962 +0.005
1280 133.85 120 0.4 1 0 0.0 0.1 0.000 2.967 +0.000
105 1050 125mm MW 48.4 33.858 0 43.26 0.000 2.935 -0.000
1290 133.85 120 0.1 0 1 0.0 0.0 0.000 2.934 +0.000
106 1280 125mm MW -296.3 0.849 45 0.85 0.000 2.967 +0.000
1310 133.85 120 0.4 0 0 0.0 0.1 0.000 2.967 +0.000
107 1290 125mm MW 48.4 0.849 45 0.85 0.000 2.934 -0.000
1330 133.85 120 0.1 0 0 0.0 0.0 0.000 2.934 +0.000
108 1330 125mm MW 48.4 15.951 0 15.95 0.000 2.934 -0.000
1340 133.85 120 0.1 0 0 0.0 0.0 0.000 2.934 +0.000
109 1310 125mm MW -296.3 16.282 0 16.28 0.000 2.967 +0.002
1350 133.85 120 0.4 0 0 0.0 0.1 0.000 2.970 +0.000
110 1350 125mm MW -296.3 0.849 315 3.86 0.000 2.970 +0.001
1370 133.85 120 0.4 1 0 0.0 0.1 0.000 2.970 +0.000
111 1340 125mm MW 48.4 0.849 315 3.86 0.000 2.934 -0.000
1390 133.85 120 0.1 1 0 0.0 0.0 0.000 2.934 +0.000
112 1370 125mm MW -296.3 21.342 0 30.37 0.000 2.970 +0.004
1400 133.85 120 0.4 3 0 0.0 0.1 0.000 2.975 +0.000
113 1390 125mm MW 48.4 21.111 0 30.89 0.000 2.934 -0.000
1410 133.85 120 0.1 3 0 GV 0.0 0.0 0.000 2.934 +0.000
114 1410 125mm MW 377.8 4.178 0 4.18 0.000 2.934 -0.001
1420 133.85 120 0.4 0 0 0.0 0.2 0.000 2.933 +0.000

Continued on the next page

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 9
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Hydraulically Significant Pipes in System

NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
115 1410 125mm MW -329.3 42.145 270 70.35 0.000 2.934 +0.012
1430 133.85 120 0.4 6 1 GV 0.0 0.2 0.000 2.946 +0.000
116 1420 125mm MW 377.8 9.938 90 12.95 0.000 2.933 -0.003
1270 133.85 120 0.4 1 0 0.0 0.2 0.000 2.930 +0.000
117 1400 125mm MW -296.3 41.000 270 68.83 0.000 2.975 +0.010
1680 133.85 120 0.4 9 0 GV 0.0 0.1 0.000 2.984 +0.000
118 1680 125mm MW -296.3 1.376 270 2.13 0.000 2.984 +0.000
1440 133.85 120 0.4 0 0 GV 0.0 0.1 0.000 2.985 +0.000
119 1440 125mm MW -296.3 0.566 315 0.57 0.000 2.985 +0.000
1460 133.85 120 0.4 0 0 0.0 0.1 0.000 2.985 +0.000
120 1430 125mm MW -329.3 0.566 315 0.57 0.000 2.946 +0.000
1480 133.85 120 0.4 0 0 0.0 0.2 0.000 2.946 +0.000
121 1460 125mm MW -296.3 10.781 270 20.18 0.000 2.985 +0.003
1490 133.85 120 0.4 0 1 0.0 0.1 0.000 2.987 +0.000
122 1480 125mm MW -329.3 10.726 270 10.73 0.000 2.946 +0.002
1500 133.85 120 0.4 0 0 0.0 0.2 0.000 2.948 +0.000
123 320 150mm MW 759.6 41.440 0 41.44 0.000 2.982 -0.016
1510 155.32 120 0.7 0 0 0.0 0.4 0.000 2.966 +0.000
124 330 150mm MW 296.3 41.440 0 50.95 0.000 2.997 -0.003
1520 155.32 120 0.3 0 1 0.0 0.1 0.000 2.994 +0.000
125 1510 150mm MW 759.6 6.704 90 9.56 0.000 2.966 -0.004
1120 155.32 120 0.7 1 0 0.0 0.4 0.000 2.962 +0.000
126 1500 125mm MW -329.3 73.648 182 82.67 0.000 2.948 +0.014
1120 133.85 120 0.4 3 0 0.0 0.2 0.000 2.962 +0.000
127 1520 150mm MW 296.3 6.929 90 9.78 0.000 2.994 -0.001
1530 155.32 120 0.3 1 0 0.0 0.1 0.000 2.993 +0.000
128 1530 150mm MW 296.3 73.256 2 81.81 0.000 2.993 -0.006
1490 155.32 120 0.3 3 0 0.0 0.1 0.000 2.987 +0.000
129 720 80mm MW 600.0 1.000 Up 2.81 0.000 2.761 -0.017
1540 80.68 120 2.0 1 0 90.0 6.1 1.000 2.646 -0.098
130 1540 80mm MW 600.0 0.600 270 2.41 1.000 2.646 -0.015
1550 80.68 120 2.0 1 0 0.0 6.1 1.000 2.631 +0.000
131 1550 80mm MW 600.0 3.550 Up 5.36 1.000 2.631 -0.033
1560 80.68 120 2.0 1 0 90.0 6.1 4.550 2.250 -0.348
132 1560 80mm MW 600.0 0.290 270 2.10 4.550 2.250 -0.013
1570 80.68 120 2.0 1 0 0.0 6.1 4.550 2.237 +0.000
133 1570 80mm MW 600.0 23.405 0 25.21 4.550 2.237 -0.155
1580 80.68 120 2.0 1 0 0.0 6.2 4.550 2.082 +0.000

Continued on the next page

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 10
Submitted by user number Project: XL-02
Address: HCM
Number: 0552024
Area ref: Most Unfavourable
Hazard: Domestic
Authority: National Fire Protection Association
Source: 1800.0 l/min @ 3.011 bar
Tel: Fax: Printout: 8-December-24 at 19:11

Hydraulically Significant Pipes in System

NUMBERS | P I P E | F L O W |DIMENSIONS|ANGLE| VALUES |HEIGHT M|PRESSURES BARS
Pipe|Start|Size Type| L/min | Length VJ|Dir. | Eq.len | Start | Start Frict
no | End |Bore 'C'| Vel m/s |EL T VT|Slope| mbar/m | End | End Static
134 1580 80mm MW 600.0 17.090 270 18.90 4.550 2.082 -0.116
1590 80.68 120 2.0 1 0 0.0 6.2 4.550 1.966 +0.000
135 1590 80mm MW 600.0 2.200 Dn 4.01 4.550 1.966 -0.025
1600 80.68 120 2.0 1 0 -90.0 6.1 2.350 2.157 +0.216
136 1600 65mm MW 300.0 0.520 90 5.27 2.350 2.157 -0.020
1610 68.67 120 1.4 0 1 0.0 3.7 2.350 2.137 +0.000
137 1610 65mm MW 300.0 0.300 Dn 1.88 2.350 2.137 -0.007
1620 68.67 120 1.4 1 0 -90.0 3.7 2.050 2.160 +0.029
138 1620 65mm MW 300.0 0.300 270 1.88 2.050 2.160 -0.007
1630 68.67 120 1.4 1 0 0.0 3.7 2.050 2.153 +0.000
139 1600 65mm MW 300.0 0.520 270 5.27 2.350 2.157 -0.020
1640 68.67 120 1.4 0 1 0.0 3.7 2.350 2.137 +0.000
140 1640 65mm MW 300.0 0.300 Dn 1.88 2.350 2.137 -0.007
1650 68.67 120 1.4 1 0 -90.0 3.7 2.050 2.160 +0.029
141 1650 65mm MW 300.0 0.300 90 1.88 2.050 2.160 -0.007
1660 68.67 120 1.4 1 0 0.0 3.7 2.050 2.153 +0.000

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC
 Full Hydraulic Calculations Computer Printout Page No 11
710
740
730 690
700 680 670
660
1540
1560
1550
1570
1580 720
1620
1610
1630
1600
1660
1640
1650
H
1590

790 760
1200 750 780
770
800 650
640 620
630
810
830
820
840

590
600 570
560 610

550520
540530

880
870 850
860

1180 1150
1170 1140
920 890 950
900 910
940
970
1210 980
990
1230 1030
1010

500480
510 490
450
470
430
420 410
400

1240
1260 1270
1400
1420
1410 1350
1340
1370
1390 1310
1330
1280
1290 1040
1050
1060
1080

1090
1110
1670

240
120
110
130
160
260
270
280
290
1480
1460
1680
1430
1440 100
250
230
220
210

1500
1490 1120
1530
1510 320
300 360
370
340 380
390
1520 330
310 350

FHC - Hydraulic Analysis Software - Ver: 1.8.4

By CANUTE LLP - Email [email protected] Web www.canutesoft.com
Program FHC