Scribd Logo
Upload

Welcome to Scribd!

  • 3 views

    Formolene 6502A

    Uploaded by

    Laura Colorado

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Formolene 6502A

    Uploaded by

    Laura Colorado
    3 views1 page

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    3 views1 page

    Formolene 6502A

    Uploaded by

    Laura Colorado

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    Formolene® 6502A

    Impact Copolymer for Extrusion Applications


    Formolene® 6502A is a high impact copolymer with an excellent balance of toughness and stiffness. It is
    suitable for blow-molded bottles and components, heavy gauge sheet for thermoformed containers and
    components and profile extrusions including corrugated board.

    Material has been approved under automotive specification - FCA MS-DB-500 CPN 4809.

    Formolene® 6502A meets the requirements of the U.S. Food and Drug Administration as specified in 21
    CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food
    contact. For additional information on approved conditions of use for food contact applications, please refer
    to the “Products” section on our website (http://www.fpcusa.com/ourproducts.html).

    This material is free of animal-derived content.


    Typical Properties of this Commercial Grade
    Typical Values
    Property Test Method English SI
    Melt Flow Rate, I2 @ 230°C ASTM D1238 1.5 g/10min 1.5 g/10min
    Density ASTM D1505 0.9 g/cm3 0.9 g/cm3
    Tensile Strength at Yield (50
    ASTM D638 3,800 26
    mm/min) psi MPa
    Elongation at Yield (50 mm/min) ASTM D638 9 % 9 %
    Flexural Modulus (1.3 mm/min),
    ASTM D790 175,000 psi 1207 MPa
    1% Secant
    Rockwell Hardness ASTM D785 95 R Scale 95 R Scale
    Notched Izod Impact Strength @
    ASTM D256A 16 ft-lb/in 854 J/m
    73°F
    Notched Izod Impact Strength @
    ASTM D256A 1.7 91
    32°F ft-lb/in J/m
    Heat Deflection Temperature @ 66
    ASTM D648 203 97
    psi °F °C
    Notes: Specimens were injection molded according to the conditions specified in ASTM D4101. Data for representative
    purposes only; not to be construed as product specification. Published 4/03, Revised 3/18

    10/15

    You might also like