CAR JACK

[Document subtitle]

Three types of the most common jacks :

1- Scissor jack

2- Hydraulic jack

3- Floor jack

[DATE]
SOLIDWORKS
[Company address]
Analyzed with SOLIDWORKS Simulation Simulation of Part8 0
 Parts

Analyzed with SOLIDWORKS Simulation Simulation of Part8 1

Analyzed with SOLIDWORKS Simulation Simulation of Part8 2
Analyzed with SOLIDWORKS Simulation Simulation of Part8 3
Lift plate

Analyzed with SOLIDWORKS Simulation Simulation of Part8 4

 Assembly

LIBRARY:
Hex Flange
Bolt iso 4162

4 :: M12 /
Length= 30
/Thread
Length = 30

6 :: M12 /
Length = 64 /
Thread
Length = 30

10:: Hex Nut-

Prevailing
Torque

1 :: Hex Nuts
M24

Analyzed with SOLIDWORKS Simulation Simulation of Part8 5

vv

Simulation of Part8
Designer: Solidworks
Study name: Static 5
Analysis type: Static

Table of Contents
Description .......................................... 6
Assumption .......................................... 7
Model Information .................................. 7
Study Properties .................................... 8
Units .................................................. 8
Material Properties ................................. 9
Loads and Fixtures ................................. 9
Connector DefinitionsError! Bookmark not defined.
Contact InformationError! Bookmark not defined.
Mesh information ................................. 10
Sensor Details ... Error! Bookmark not defined.
Resultant Forces .................................. 11
Beams ............ Error! Bookmark not defined.
Study Results ...................................... 12
Description Conclusion ....... Error! Bookmark not defined.
No Data

Analyzed with SOLIDWORKS Simulation Simulation of Part8 6

Assumptions

Model Information

Model name: Part8

Current Configuration: Default
Solid Bodies
Document Name and Document Path/Date
Treated As Volumetric Properties
Reference Modified
Split Line1
Mass:0/460308 kg C:\Users\ATEN-
Volume:5/97802e-05 m^3 PC\Documents\project
Solid Body Density:7,700 kg/m^3 solidworks car jack
Weight:4/51102 N 2\Part8.SLDPRT
Jun 12 17:25:32 2023

Analyzed with SOLIDWORKS Simulation Simulation of Part8 7

Study Properties
Study name Static 5
Analysis type Static
Mesh type Solid Mesh
Thermal Effect: On
Thermal option Include temperature loads
Zero strain temperature 298 Kelvin
Include fluid pressure effects from SOLIDWORKS Off
Flow Simulation
Solver type FFEPlus
Inplane Effect: Off
Soft Spring: Off
Inertial Relief: Off
Incompatible bonding options Automatic
Large displacement On
Compute free body forces On
Friction Off
Use Adaptive Method: Off
Result folder SOLIDWORKS document (C:\Users\ATEN-
PC\Documents\project solidworks car jack 2)

Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2

Analyzed with SOLIDWORKS Simulation Simulation of Part8 8

Material Properties
Model Reference Properties Components
Name: Alloy Steel SolidBody 1(Split
Model type: Linear Elastic Isotropic Line1)(Part8)
Default failure Max von Mises Stress
criterion:
Yield strength: 6/20422e+08 N/m^2
Tensile strength: 7/23826e+08 N/m^2
Elastic modulus: 2/1e+11 N/m^2
Poisson's ratio: 0/28
Mass density: 7,700 kg/m^3
Shear modulus: 7/9e+10 N/m^2
Thermal expansion 1/3e-05 /Kelvin
coefficient:
Curve Data:N/A

Loads and Fixtures

Fixture name Fixture Image Fixture Details
Entities: 1 face(s)
Type: Fixed Geometry

Fixed-1

Resultant Forces
Components X Y Z Resultant
Reaction force(N) 0/285767 1/15176 -248/201 248/204
Reaction Moment(N.m) 0 0 0 0

Load name Load Image Load Details

Entities: 1 face(s)
Reference: Face< 1 >
Type: Apply force
Force-1 Values: ---‫؛‬250 ‫ ؛‬--- N

Analyzed with SOLIDWORKS Simulation Simulation of Part8 9

Mesh information
Mesh type Solid Mesh
Mesher Used: Standard mesh
Automatic Transition: Off
Include Mesh Auto Loops: Off
Jacobian points 4 Points
Element Size 3/91135 mm
Tolerance 0/195567 mm
Mesh Quality Plot High

Mesh information - Details

Total Nodes 13267
Total Elements 7416
Maximum Aspect Ratio 6/0986
% of elements with Aspect Ratio < 3 99/3
% of elements with Aspect Ratio > 10 0
% of distorted elements(Jacobian) 0
Time to complete mesh(hh;mm;ss): 00:00:01
Computer name:

Analyzed with SOLIDWORKS Simulation Simulation of Part8 10

Resultant Forces
Reaction forces
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N 0/285767 1/15176 -248/201 248/204

Reaction Moments
Selection set Units Sum X Sum Y Sum Z Resultant
Entire Model N.m 0 0 0 0

Analyzed with SOLIDWORKS Simulation Simulation of Part8 11

Study Results

Name Type Min Max

Stress1 VON: von Mises Stress 7/477e-03 N/m^2 7/012e+08 N/m^2
Node: 1578 Node: 1507

Part8-Static 5-Stress-Stress1

Name Type Min Max

Displacement1 URES: Resultant Displacement 0/000e+00 mm 4/087e+01 mm
Node: 350 Node: 6860

Analyzed with SOLIDWORKS Simulation Simulation of Part8 12

 Part8-Static 5-Displacement-Displacement1

Name Type Min Max

Strain1 ESTRN: Equivalent Strain 1/233e-14 2/069e-03
Element: 4959 Element: 3827

Part8-Static 5-Strain-Strain1

R = 10 >> R = 6

Analyzed with SOLIDWORKS Simulation Simulation of Part8 13