Driver Monitoring System

GM2H
User Guide for Commercial Vehicle
Rev.03

GigaConcept -:- Tél +33 (0)1 60 82 86 33 • Fax +33 (0)1 60 82 06 82

www.giga-concept.fr | www.g-media.fr | www.giga-network.fr 1
 GM2H
User Guide

Contents
REVISION HISTORY ......................................................................................................................................................... 4
1. GENERAL INFORMATION ........................................................................................................................................ 5
1.1. Product Description....................................................................................................................................... 5
1.2. Product Specifications .................................................................................................................................. 6
1.3. Product Overview .......................................................................................................................................... 7
1.3.1. Device ..................................................................................................................................................... 7
1.3.2. Multi-Cable ............................................................................................................................................. 8
1.4. Package & Accessories ................................................................................................................................ 8
2. CONFIGURATION...................................................................................................................................................... 9
2.1. Speaker Volume .......................................................................................................................................... 13
2.2. Time Zone..................................................................................................................................................... 13
2.3. Test Mode ..................................................................................................................................................... 14
2.4. RGBLed......................................................................................................................................................... 14
2.5. JPG Save ...................................................................................................................................................... 14
2.6. Drowsy Detection ........................................................................................................................................ 15
2.7. Distraction Detection ................................................................................................................................... 16
2.8. Facial Departure Detection ........................................................................................................................ 17
2.9. Smoking Detection ...................................................................................................................................... 18
2.10. Calling Detection ......................................................................................................................................... 19
2.11. Yawning Detection ...................................................................................................................................... 20
2.12. Sensitivity...................................................................................................................................................... 21
2.13. CameraFlip Mode ........................................................................................................................................ 21
2.14. Custom Scenario ......................................................................................................................................... 21
2.15. CVBS Mode .................................................................................................................................................. 21
3. GETTING STARTED ................................................................................................................................................ 22
3.1. Memory Card ............................................................................................................................................... 22
3.1.1. microSD Card ...................................................................................................................................... 22
3.1.2. Memory Card Structure ..................................................................................................................... 22
3.1.3. Data Folder ........................................................................................................................................... 23
3.1.4. Event Folder ......................................................................................................................................... 23
3.2. Configuration File ........................................................................................................................................ 24
3.3. Custom Sound File ...................................................................................................................................... 26
3.4. Firmware Update ......................................................................................................................................... 27
3.5. Face Detection Range................................................................................................................................. 28
3.6. Installation ..................................................................................................................................................... 29
4. OPERATION ............................................................................................................................................................. 32
4.1. Event Detection............................................................................................................................................ 32
4.2. Event Scenario ............................................................................................................................................. 33
4.3. LED Scenario ............................................................................................................................................... 34

GigaConcept 2
 GM2H
User Guide

CONTACT ........................................................................................................................................................................ 35

GigaConcept 3
 GM2H
User Guide

Revision History
Revision Issue Date Author Changes
01 2020-06-29 Don SEO  Initial release.
02 2020-09-25 Don SEO  Updated Product Specifications.
03 2020-10-23 Don SEO  Updated Configuration, Configuration File.

GigaConcept 4
 GM2H
User Guide

1. General Information

1.1. Product Description

This device is a camera-based active driver state monitoring system observing and detecting driver attention
by tracking face position, face direction, eyelid closure, eye gaze direction, etc. through real-time video data.

Product Features
◼ Real-time Driver Monitoring System Designed for Commercial Vehicles
◼ Driver Safety Alert via LED and/or Sound
◼ Expended Detection Rage via HD Image Sensor
◼ Sleep Deprivation Detection & Alert – Microsleep, Nodding Off, Drowsy Driving, Yawning
◼ Distraction Alert for;
▪ Visual Distractions: Eyes-Off-Road, Out of Detection Range
▪ Manual Distractions: Mobile Phone Use, Smoking
◼ Driver Monitoring in Dark Environments (in tunnels or at night) via Infrared LED
◼ Tracking Eyes beyond Glasses or Sunglasses
◼ Built-in Loudspeaker
◼ 3-color LED Status Indicator (Red / Green / Blue)
◼ 4-step Volume Adjustment
◼ Multi-Cable for Power Supply, RS232, GPIO, Video-out, GPS Receiver
◼ Interoperability with a Wide Variety of Systems such as GPS Tracker, Car Navigation System, Mobile
Data Terminal, Fleet Management System, Telematics System, Digital Tachograph, Dash Cam
◼ Location Information via External GPS Receiver
◼ Simple Operation & User-friendly Functionality
◼ Easy Configuration via microSD Card

GigaConcept 5
 GM2H
User Guide

1.2. Product Specifications

Detection Distance 90-110 cm

Processor ARM Cortex A7 1.2 GHz
Image Sensor HD CMOS Image Sensor
Storage microSD Card (optional)
Indicator LED (Red / Green / Blue)
Button Volume or Sensitivity
Audio Loudspeaker
Interface 1 x microSD Card Slot
1 x I/O Port for Multi-Cable
Expansion Interface 1 x 12V/24V DC Power Input
(Multi-Cable) 1 x Video-out (CVBS)
1 x RS232
1 x GPIO
1 x GPS Port
Dimensions 111.3 x 67.1 x 43.2 mm (device only)
Operation Temperature -20 to +70 ℃

* For better performance, the exterior designs or the specifications of this product may change without any
prior notice.

GigaConcept 6
 GM2H
User Guide

1.3. Product Overview

1.3.1. Device

1 2 3 4
8 9 10

No Part Description

① Speaker  Built-in loudspeaker.

② Infrared LED  Detect the driver’s face in dark environment.

③ LED Status Indicator  Light up the LED indicator (red / green / blue) when receiving
notifications.

④ Camera  Monitoring of driver in real time.

⑤ Adjustment Screws  Adjust the angle of the pedestal by rotating to the desired angle.

⑥ Mounting Holes  Screw holes to mount on the dashboard or console.

⑦ Bracket Plate  Rectangle plate with adhesive tape

⑧ Function Button  Adjust the volume level.

⑨ I/O Port  Connect the multi-cable.

⑩ microSD Card Slot  Configuration and firmware update by microSD card.

 Event logs saved in microSD card.

GigaConcept 7
 GM2H
User Guide

1.3.2. Multi-Cable

⚫ Reference Drawing

1.4. Package & Accessories

Standard Package
⚫ Main Unit
⚫ Bracket
⚫ Bracket Plate
⚫ Screws & Wrench for Bracket Assembly
⚫ Multi-Cable

Optional Accessories
⚫ External GPS Receiver
⚫ microSD Card & Adapter
⚫ Vibration Cushion

GigaConcept 8
 GM2H
User Guide

2. Configuration
Parameter List
⚫ Following configurable parameters listed in config.txt file.

Parameter Description
Speaker Volume  Adjust the speaker volume.
Time zone  Time zone setting
Test_Mode  Enable / Disable the test mode.
Unknown  Enable / Disable the out-of-range detection.
NotSee  Enable / Disable the distraction detection.
RGBLed  Switch the LED indicator ON / OFF.
ExtSPD  Enable / Disable the speed input from external device or source. (TBD)
Smoking  Enable / Disable the smoking detection.
Calling  Enable / Disable the calling detection.
Yawning  Enable / Disable the yawning detection.
FaceID  Enable / Disable the user face detection. (TBD)
JPGSave  Set the resolution of the captured image.
JPGCaption  Enable / Disable sending out the captured JPG file by a command.
DrvSPD  Reference speed at which stops / drivers are distinguished. (TBD)
DrvHSPD  Reference speed at which high speed is measured. (TBD)
Drowsy SA Speed  Reference speed at which the alarm sounds when drowsiness is detected.
Drowsy GPS Mode  Set the GPS mode for drowsiness detection event.
Drowsy SEN1  Set sensitivity for drowsiness level 1.
Drowsy SEN2  Set sensitivity for drowsiness level 2.
Drowsy SEN3  Set sensitivity for drowsiness level 3.
Distract SA Speed  Reference speed at which the alarm sounds when distraction is detected.
Distract GPS Mode  Set the GPS mode for distraction detection event.
Distract SEN1  Set sensitivity for distraction level 1.
Distract SEN2  Set sensitivity for distraction level 2.
Distract SEN3  Set sensitivity for distraction level 3.
Depar SA Speed  Reference speed at which the alarm sounds when the facial departure (out-
of-range) is detected.
Depar GPS Model  Set the GPS mode for facial departure detection event.
Depar SA Repeat  Enable / Disable repeat of facial departure alarm.
Depar SEN1  Set sensitivity for facial departure level 1.
Depar SEN2  Set sensitivity for facial departure level 2.
Depar SEN3  Set sensitivity for facial departure level 3.
SMK SA Speed  Reference speed at which smoking is detected.

GigaConcept 9
 GM2H
User Guide

Parameter Description
SMK GPS Mode  Set the GPS mode for smoking detection.
SMK SEN  Set sensitivity for smoking detection.
CALL SA Speed  Reference speed at which the mobile phone usage is detected.
CALL GPS Mode  Set the GPS mode for mobile phone usage.
CALL SEN  Set sensitivity for calling detection.
Yawn SA Speed  Reference speed at which yawning is detected.
Yawn GPS Mode  Set the GPS model for yawning detection.
Yawn SEN  Set sensitivity for yawning detection.
Yawn Ratio  Adjust the aspect ratio (horizontal and vertical sizes) of the mouth.
Sensitivity  Set overall sensitivity levels.
CameraFlip Mode  Set the camera rotation model.
Custom Scenario  Customized scenarios (TBD)
CVBS Mode  Set the video-out mode.

GigaConcept 10
 GM2H
User Guide

Sound Alarm output conditions

Sound Alarms are available for the following events:
⚫ Facial Departure (out of range)
⚫ Distraction
⚫ Drowsy
⚫ Smoking
⚫ Calling
⚫ Yawning
The Sound Alarm will be triggered under the following conditions:
⚫ The event status is maintained for longer than the time defined by the “Sensitivity Value” (SEN1,
SEN2, SEN3)
⚫ The current vehicle speed is greater than the speed defined by the “SA Speed” value (only if vehicle
speed is available).
Note: Vehicle speed is only available if a GPS receiver or an external speed input device is connected
to the device.

GigaConcept 11
 GM2H
User Guide

Driver Status Detection Process

Scenario
Process GPS Info (For Speed)

No

Is status set?

Yes
FRONT_STATUS
LEFT_SIDE_STATUS
RIGHT_SIDE_STATUS
NO EVENT

UNKNOWN_STATUS Yes alarmType =

Is speed > limit?
DRIVER_ABNORMAL_ALARM

alarmType =
SLEEP_STATUS Yes Check LVL1 DROWSY_DRIVING_ALARM
Is speed > limit?
Warning Level fatigueDegree =
FATIGUE_DEG_STEP5
LVL2
alarmType =
DROWSY_DRIVING_ALARM
fatigueDegree =
FATIGUE_DEG_STEP10

NOT_SEE_STATUS Yes alarmType =

Is speed > limit?
DISTRACT_DRIVING_ALARM

YAWN DETECTED Yes alarmType =

Is speed > limit?
YAWNING_ALARM

HANDPHONE DETECTED Yes alarmType =

Is speed > limit?
CALLING_ALARM

SMOKING DETECTED Yes alarmType =

Is speed > limit?
SMOKING_ALARM

GigaConcept 12
 GM2H
User Guide

2.1. Speaker Volume

Parameter Range Default Value Note

Speaker Volume 0-4 2 ▪ Setting Value
 0 : Mute
 1~4 : Level 1~4

2.2. Time Zone

Parameter Range Default Value Note

Time zone 0-24 21

Time Zone Table

Setting Value Relative to GMT Name Description
1 GMT-11:00 MIT Midway Islands Time
2 GMT-10:00 HST Hawaii Standard Time
3 GMT-9:00 AST Alaska Standard Time
4 GMT-8:00 PST Pacific Standard Time
5 GMT-7:00 MST Mountain Standard Time
6 GMT-6:00 CST Central Standard Time
7 GMT-5:00 EST Eastern Standard Time
8 GMT-4:00 PRT Puerto Rico and US Virgin Islands Time
9 GMT-3:00 AGT Argentina Standard Time
10 GMT-2:00 CAT Central Atlantic Standard Time
11 GMT-1:00 CAT Central African Time
12 GMT UTC Universal Coordinated Time
13 GMT+1:00 ECT European Central Time
14 GMT+2:00 EET Eastern European Time
15 GMT+3:00 EAT Eastern African Time
16 GMT+4:00 NET Near East Time
17 GMT+5:00 PLT Pakistan Lahore Time
18 GMT+6:00 BST Bangladesh Standard Time
19 GMT+7:00 VST Vietnam Standard Time
20 GMT+8:00 CTT China Taiwan Time
21 GMT+9:00 KST Korea Standard Time
22 GMT+10:00 AET Australia Eastern Time
23 GMT+11:00 SST Solomon Standard Time
24 GMT+12:00 NST New Zealand Standard Time

GigaConcept 13
 GM2H
User Guide

2.3. Test Mode

Parameter Range Default Value Note

Test_Mode 0-1 0 ▪ Setting Value:
 0 : Disable
 1 : Enable

⚫ If Test mode is enabled, a sound alarm triggered for all events regardless of speed.

2.4. RGBLed

Parameter Range Default Value Note

RGBLed 0-1 0 ▪ Setting Value:
 0 : Disable
 1 : Enable

2.5. JPG Save

Parameter Range Default Value Note

JPGSave 0-5 2 ▪ Setting Value:
 0 : Disable
 1 : 160*120
 2 : 320*240
 3 : 640*480
 4 : 1280*720
 5 : 1280*960
JPGCaption 0-1 1 ▪ Setting Value:
 0 : Disable
 1 : Enable

⚫ When an event occurs, an image of the triggered event is saved as a jpg file in a specific folder on the
SD card.
⚫ JPEG can be saved only when RTC is set to the current date/time or received by GPS.

GigaConcept 14
 GM2H
User Guide

2.6. Drowsy Detection

Parameter Range Default Value Note

Drowsy SA speed 0-255 20 ▪ Unit: Km/h
▪ Sound alarm
Drowsy GPS Mode 0-5 1 ▪ Setting Value
 0 : A only
 1 : A, D, V (last speed)
 2 : A, D, V (200 km/h)
 3 : A, D
 4 : A, V (last speed)
 5 : A, V (200 km/h)
Drowsy SEN1 400-10000 2500 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 1 (Low)
Drowsy SEN2 400-10000 1500 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 2 (Middle)
Drowsy SEN3 400-10000 700 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 3 (High)

⚫ Description of GPS setting mode

◼ A : GPS signal is properly received. (active)
◼ D : GPS is unplugged.
◼ V : GPS is plugged but no signal. (invalid)

GigaConcept 15
 GM2H
User Guide

2.7. Distraction Detection

Parameter Range Default Value Note

NotSee 0-1 1 ▪ Setting Value:
 0 : Disable
 1 : Enable
Distract SA speed 0-255 20 ▪ Unit: Km/h
▪ Sound alarm
Distract GPS Mode 0-5 1 ▪ Setting Value
 0 : A only
 1 : A, D, V (last speed)
 2 : A, D, V (200 km/h)
 3 : A, D
 4 : A, V (last speed)
 5 : A, V (200 km/h)
Distract SEN1 300-10000 5000 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 1 (Low)
Distract SEN2 300-10000 4000 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 2 (Middle)
Distract SEN3 300-10000 3000 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 3 (High)

⚫ Description of GPS setting mode

◼ A : GPS signal is properly received. (active)
◼ D : GPS is unplugged.
◼ V : GPS is plugged but no signal. (invalid)

GigaConcept 16
 GM2H
User Guide

2.8. Facial Departure Detection

Parameter Range Default Value Note

Unknown 0-1 1 ▪ Setting Value:
 0 : Disable
 1 : Enable
Depar SA speed 0-255 20 ▪ Unit: Km/h
▪ Sound alarm
Depar GPS Mode 0-5 1 ▪ Setting Value
 0 : A only
 1 : A, D, V (last speed)
 2 : A, D, V (200 km/h)
 3 : A, D
 4 : A, V (last speed)
 5 : A, V (200 km/h)
Depar SA Repeat 0-1 1 ▪ Setting Value:
 0 : Disable
 1 : Enable
Depar SEN1 300-600000 600000 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 1 (Low)
Depar SEN2 300-600000 600000 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 2 (Middle)
Depar SEN3 300-600000 600000 ▪ Unit: millisecond (adjust per 100 ms)
▪ Level 3 (High)

⚫ Description of GPS setting mode

◼ A : GPS signal is properly received. (active)
◼ D : GPS is unplugged.
◼ V : GPS is plugged but no signal. (invalid)

GigaConcept 17
 GM2H
User Guide

2.9. Smoking Detection

Parameter Range Default Value Note

Smoking 0-1 1 ▪ Setting Value:
 0 : Disable
 1 : Enable
SMK SA speed 0-255 0 ▪ Unit: Km/h
▪ Sound alarm
SMK GPS Mode 0-5 1 ▪ Setting Value
 0 : A only
 1 : A, D, V (last speed)
 2 : A, D, V (200 km/h)
 3 : A, D
 4 : A, V (last speed)
 5 : A, V (200 km/h)
SMK SEN 3-20 10 ▪ Unit: 100 milliseconds

⚫ Description of GPS setting mode

◼ A : GPS signal is properly received. (active)
◼ D : GPS is unplugged.
◼ V : GPS is plugged but no signal. (invalid)

GigaConcept 18
 GM2H
User Guide

2.10. Calling Detection

Parameter Range Default Value Note

Calling 0-1 1 ▪ Setting Value:
 0 : Disable
 1 : Enable
CALL SA speed 0-255 10 ▪ Unit: Km/h
▪ Sound alarm
CALL GPS Mode 0-5 1 ▪ Setting Value
 0 : A only
 1 : A, D, V (last speed)
 2 : A, D, V (200 km/h)
 3 : A, D
 4 : A, V (last speed)
 5 : A, V (200 km/h)
CALL SEN 3-20 10 ▪ Unit: 100 milliseconds

⚫ Description of GPS setting mode

◼ A : GPS signal is properly received. (active)
◼ D : GPS is unplugged.
◼ V : GPS is plugged but no signal. (invalid)

GigaConcept 19
 GM2H
User Guide

2.11. Yawning Detection

Parameter Range Default Value Note

Yawning 0-1 1 ▪ Setting Value:
 0 : Disable
 1 : Enable
Yawn SA speed 0-255 10 ▪ Unit: Km/h
▪ Sound alarm
Yawn GPS Mode 0-5 1 ▪ Setting Value
 0 : A only
 1 : A, D, V (last speed)
 2 : A, D, V (200 km/h)
 3 : A, D
 4 : A, V (last speed)
 5 : A, V (200 km/h)
Yawn SEN 3-20 10 ▪ Unit: 100 milliseconds
Yawn Ratio 1-100 38 ▪ Mouth H-V Ratio
(detection criterion for yawning)
 the ratio of horizontal and vertical
sizes for the mouth.
 If you want the alarm to sound when
your mouth is wide open, set it to a
high value and vice versa, set it to a
low value.

⚫ Description of GPS setting mode

◼ A : GPS signal is properly received. (active)
◼ D : GPS is unplugged.
◼ V : GPS is plugged but no signal. (invalid)

GigaConcept 20
 GM2H
User Guide

2.12. Sensitivity

Parameter Range Default Value Note

Sensitivity 1-3 2 ▪ Setting Value:
 1 : Low
 2 : Middle
 3 : High

⚫ Description of Sensitivity setting

◼ 1 : applicable to Drowsy SEN1, Distract1, Depar SEN1
◼ 2 : applicable to Drowsy SEN2, Distract2, Depar SEN2
◼ 3 : applicable to Drowsy SEN3, Distract3, Depar SEN3

2.13. CameraFlip Mode

Parameter Range Default Value Note

CameraFlip Mode 0-3 0 ▪ Setting Value:
 0 : normal
 1 : rotate 90-degrees
 2 : rotate 180-degrees
 3 : rotate 270-degrees

2.14. Custom Scenario

Parameter Range Default Value Note

Custom Scenario 0-255 0 ▪ Reserved

2.15. CVBS Mode

Parameter Range Default Value Note

CVBS Mode 1-2 1 ▪ Setting Value:
 1 : NTSC
 2 : PAL

GigaConcept 21
 GM2H
User Guide

3. Getting Started

3.1. Memory Card

3.1.1. microSD Card

1. Unplug the power cable.

2. Insert the microSD card with gold contacts facing down.

Caution
If the card is not inserted correctly, the device cannot detect the card.

3.1.2. Memory Card Structure

[MDMS]
├─[Data]
│ ├─[Ble]
│ ├─[Config]
│ │ └─ config.txt
│ ├─[Database]
│ │ ├─ mtek_fr.dat
│ │ ├─ mtek_landmark_v1.dat
│ │ └─ mtek_spd.dat
│ ├─[FaceID]
│ ├─[Sound]
│ └─[Update]
│ └─ xxxxx.img
└─[Event]
├─[20200601]
│ ├─ Ble_report
│ └─ Images
└─[20200601]
├─ Ble_report
└─ Images

GigaConcept 22
 GM2H
User Guide

3.1.3. Data Folder

Folder Name Description

Ble ▪ Information used by the BLE device is stored here. (TBD)
Config ▪ A new configuration file, “config.txt”, can be stored here.
▪ During boot, the updated “config.txt” file will be copied to the internal storage of
the device.
Database ▪ This folder contains the database files for yawn detection and face recognition.
▪ PLEASE DO NOT DELETE FOLLOWING FILES.
 mtek_face_v1.dat
 mtek_landmark_v1.dat
FaceID ▪ (TBD)
Sound ▪ Custom sound alarms can be stored here.
Update ▪ A new firmware file is copied here for update.

3.1.4. Event Folder

Event images and report files generated by the device will be stored here.
In the Event folder, a folder is created in YYYYMMDD format based on the time information set in the system.

Files Description
Ble _report ▪ The report files created at specific intervals are stored here. (TBD)
Images ▪ When an event occurs, the current video information is captured and saved as a
still image.
▪ Image format: JPG
▪ File name format:
YYYY-MM-DD-hh-mm-ss_eventname_syncid.jpg
ex) MDMS/Event/20200109/Images/2020-01-09-14h-37m-54s_departure_0.jpg

GigaConcept 23
 GM2H
User Guide

3.2. Configuration File

The device has 4 following configuration files in memory.
Location File Name Description
Internal config_factory.txt  Used at factory reset.
Memory config.txt  Same as «config_factory.txt» immediately after firmware downloaded.
 Synced with config.txt in SD card.
SD Card config_factory.txt  If this file exists in SD during boot, the internal «config_factory.txt» file is
overwritten as that of SD and the files in SD are deleted.
 If «do_not_delete_config_factory.txt» exists in the same location, it is not
erased (for changing multiple device settings).
config.txt  When an empty SD card is installed, it is automatically created with the
contents of internal config.txt.
 Updated in this file if settings change during operation.
 If the internal and external «config.txt» contents are different at boot time,
the internal config.txt file is changed with the contents of this file.
(Device works according to the setting in SD card.)

The configuration files are managed in the following order.

1. If existing «config_factory.txt» in the SD card, copy it to the internal memory.
2. If not existing «config_factory.txt» in the internal memory, create it using internal «config.txt».
3. If not existing «config.txt» in the SD card, create it using «config.txt» in the internal memory.
4. If «config.txt» in the SD card is different with «config.txt» in the internal memory, copy «config.txt»
from the SD card to the internal memory.

GigaConcept 24
 GM2H
User Guide

The configuration file «config.txt» in \MDMS\Data\Config\config.txt of the microSD card contains parameters
and setting values.

Speaker Volume=2
Time zone=21
Test_Mode=0
Unknown=1
NotSee=1
RGBLed=1
ExtSPD=0
Smoking=1
Calling=1
Yawning=1
FaceID=0
JPGSave=2
JPGCaption=1
DrvSPD=30
DrvHSPD=100
Drowsy SA Speed=20
Drowsy GPS Mode=1
Drowsy SEN1=2500
Drowsy SEN2=1500
Drowsy SEN3=1000
Distract SA Speed=20
Distract GPS Mode=1
Distract SEN1=5000
Distract SEN2=4000
Distract SEN3=3000
Depar SA Speed=20
Depar GPS Mode=4
Depar SA Repeat=1
Depar SEN1=60000
Depar SEN2=60000
Depar SEN3=60000
SMK SA Speed=0
SMK GPS Mode=1
SMK SEN=10
CALL SA Speed=10
CALL GPS Mode=1
CALL SEN=10
Yawn SA Speed=10
Yawn GPS Mode=1
Yawn SEN=10
Yawn Ratio=38
Sensitivity=2
CameraFlip Mode=0
Custom Scenario=0
CVBS Mode=1

GigaConcept 25
 GM2H
User Guide

3.3. Custom Sound File

The warning/alarm sounds generated by the device can be customized by storing custom sound files in the
microSD memory card.

Sound File Location

⚫ \MDMS\Data\Sound in the microSD card

Sound File Format

⚫ ID_RIFF / ID_WAVE
⚫ 8 / 16 / 32 bit PCM file format
⚫ Any Sampling rate
Sound File Name

Sound File name Description

Power On 01_power_on.wav Sound for initial power on time.
Initial Setting Done 02_setting.wav Sound for initial setting completed and ready for
operation.
Distraction 03_distraction.wav Sound for warning on distracted driving
Out-of-Range 11_unknown.wav Sound for warning on no driver detected.
Drowsy 1 Warning
st
04_sleep_1st.wav Sound for warning on Drowsy 1st
Yawning warning
Drowsy 2nd Warning1 05_sleep_2nd1.wav Sound for warning on Drowsy 1st warning
Drowsy 2nd Warning2 06_sleep_2nd2.wav Sound for warning on Drowsy 2nd warning
Drowsy 2nd Warning3 07_sleep_2nd3.wav Sound for warning on Drowsy 3rd warning
Sensitivity Level 1 08_sensitivity_1.wav Sound for adjusting sensitivity level 1 through push
button.
Sensitivity Level 2 09_sensitivity_2.wav Sound for adjusting sensitivity level 2 through push
button.
Sensitivity Level 3 10_sensitivity_3.wav Sound for adjusting sensitivity level 3 through push
button.
Calling Detection 12_calling.wav Sound for warning on detecting mobile phone use.
Smoking Detection 13_smoking.wav Sound for warning on detecting smoking
Sound Volume 14_volume.wav Sound for adjusting Volume.

GigaConcept 26
 GM2H
User Guide

3.4. Firmware Update

The firmware is updated by the microSD card.
1. Power off the device and remove the memory card.
2. Copy a firmware file (xxxxx.img) in \MDMS\Data\Update directory of the memory card.
3. Insert the memory card and power on the device.
4. The firmware update process automatically starts. And the LED will blink every 250 milliseconds.
Note: Please do not disconnect the power supply during the firmware update. It may cause
malfunction of or damage to the device.
5. Wait until the firmware upgrade is completed. The device will then restart.
Note: The firmware file in the memory card will be automatically deleted after completed the update.

GigaConcept 27
 GM2H
User Guide

3.5. Face Detection Range

Normal State
(Front View )

15O 15O

Distraction Distraction

Roll

GigaConcept 28
 GM2H
User Guide

3.6. Installation

Cautions for Installation

⚫ Make sure to install this product in a place with flat ground after turning off your engine.
⚫ Make sure to check all components inside the gift box and to read through this User Manual so as to
install this product in a correct way.
⚫ Be careful not to block your driving sights when installing this product.
⚫ Install this product at a safe and light place.
⚫ Install this product at a place where your face can be well viewed by the camera.
⚫ Make sure to remove the protection film from the front window before installation.
⚫ Keep this product away from any place where the airbags are equipped.
⚫ Fix the multi-cable not to be visible, which can make your car clean and safe.

GigaConcept 29
 GM2H
User Guide

Mounting Position
⚫ Refer to the picture shown below and select a convenient location depending on the type of vehicle
⚫ Install the product at a location which is a little below the level of the driver’s eyes looking ahead.
⚫ Adjust the product on a level with the eyes of the driver.
⚫ Recommended location

◼ Vehicle Type: Commercial Vehicles (Bus, Heavy-duty

Track, Special Vehicles, …)
◼ Mounting Position: on-dash
◼ Distance from Driver to Device: 90-110 cm

GigaConcept 30
 GM2H
User Guide

How to Install
1. Assemble a bracket with bracket plate and metal plate as well as adhesive tape.
2. Combine the bracket with the device and screw a tamper proof security bolt (M4 x 45) by a nut.
3. Plug the multi-cable to the socket located at the back of the product.
4. Adjust the product in a straight line from the eyes of the driver.
5. Remove dust and water from your selected location for installation.
6. Remove the release liner on the adhesive tape of the bracket, then attach at an installation location.
7. Adjust the position so that the camera lens can face the driver’s eyes.
8. Tighten the adjustment screws on the bracket when the installation is completed.

GigaConcept 31
 GM2H
User Guide

4. Operation

4.1. Event Detection

Events are detected by processing the image from the camera and analyzing specific regions for conditions.

Step 1. Fin the face and eye potion and detect eye state.

Serac for Face and Eye location.

Detect eye state after found.

Step 2. Based on eye position, calculate location of left and right side of face for handphone detection.

Search for mobilephone usage.

Step 3. Based on eye position, calculate location of mouth for smoking and yawning detection.

Determine yaming state and search for smoking.

GigaConcept 32
 GM2H
User Guide

Step 4. Based on face position, recognize the face.

Perform face recognition.

4.2. Event Scenario

Once the external GPS receiver is connected, the device outputs the events according to the speed of the
vehicle.
Without the external GPS receiver, the events are always generated.

Default Speed for Events

Event With GPS/ Speed of Vehicle Notes

Drowsy 1 Event above 10 km/h • configurable
Drowsy 2t Event above 10 km/h • configurable
Distraction Event above 10 km/h • configurable
Out-of-Range Event above 10 km/h • configurable
Smoking Event above 0 km/h • configurable
Calling Event above 5 km/h • configurable
Yawning Event above 10 km/h • configurable

When the event occurs,

⚫ alarm sound is played,
⚫ alarm signal is output,
⚫ the current driver’s state is saved as a JPG file.

GigaConcept 33
 GM2H
User Guide

4.3. LED Scenario

LED Indicator
Status
Red Green Blue
Power On ● ● ●

Normal ●

Drowsy 1 ●

Drowsy 2 ●

Distracted 1 ●

Distracted 2 ●

Driver abnormal ●

GigaConcept 34
 GM2H
User Guide

Contact
Giga Concept
ZA des Marsandes, 20 rue Louise de Vilmorin,
91630 Avrainville, FRANCE
+33 (0)1 60 82 86 33
www.giga-concept.fr
[email protected]

GigaConcept 35