Diagnosis Assistance System Copyright 1999 Daimler AG

VIN Model ACTROS 930.0 - 934.3

series/model
designation
Order number License plate

Current fault codes

Control unit: ZHE

Code Text Status

0000 The control unit is faulty. Current and
stored
0100 Auxiliary heater does not start. Current and
stored
0200 Flame-out has occurred repeatedly. Current and
stored
0301 Overvoltage Current and
stored
0302 Undervoltage Current and
stored
0400 Premature flame detection Current and
stored
0701 Metering pump has T. Current and
stored
0702 Metering pump has Q. Current and
stored
0800 Blower motor antilock device is active Current and
stored
0801 Blower motor has T or is overloaded. Current and
stored
0802 Blower motor has Q or S. Current and
stored
0901 Glow pin or flame monitor has T. Current and
stored
0902 Glow pin or flame monitor has Q or S. Current and
stored
0A00 Overheating of auxiliary heater Current and
stored
0E00 The control unit is faulty. Current and
stored
0F00 Fault in communication on interior CAN databus. Current and
stored
1132 The control unit is faulty. Current and
stored
1232 Flame out at setting 2 Current and
stored
1332 Heater lock Current and
stored
1432 Permanent heater lock Current and
stored
1533 CAN bus signal 'Actual value of outside air temperature' not Current and
available from control unit GM Base module stored
1534 CAN bus signal 'Status of terminal D+' not available Current and
stored
1535 CAN bus signal 'Specified value of interior temperature' not Current and
available from control unit GM Base module stored
1536 CAN bus signal 'Switch on' not available from control unit INS Current and
Instrument stored
1537 CAN bus signal 'Actual value of coolant temperature' not Current and
available stored
1538 CAN bus signal 'Actual value of interior temperature' not Current and
available stored

20 ١٥:١٠:٢٦ ٢٠١٣ ،‫ط‬ Page 1/2

03/2009 (2009-02-12)\AddONs: (1010)
Diagnosis Assistance System Copyright 1999 Daimler AG

1539 CAN bus signal 'Specified value of interior temperature' not Current and
available stored
1632 The control unit is faulty. Current and
stored
1732 The control unit is faulty. Current and
stored
1832 The control unit is faulty. Current and
stored
1901 Temperature sensor has U. Current and
stored
1902 Temperature sensor has Q. Current and
stored
2132 The control unit is faulty. Current and
stored

Filename: C:\Programme\DAS\bin\..\trees\lkw\ZH\ZHmp201\sgscreen\AfZHmp2.s
Cell co-ordinate: 3 , 5

20 ١٥:١٠:٢٦ ٢٠١٣ ،‫ط‬ Page 2/2

03/2009 (2009-02-12)\AddONs: (1010)