Scribd
Upload
61 views4 pages

Study N Learn BIS Letter R-93026816

Uploaded by

sanjeev bishnoi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
61 views4 pages

Study N Learn BIS Letter R-93026816

Uploaded by

sanjeev bishnoi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Our Ref: Registration/CRS 2023-3398/R-93026816 Date:09-08-2023

Subject : Licence Document

Manufacturing SMARTSCHOOL EDUCATION PRIVATE LIMITED


Unit : 2ND FLOOR, PLOT NO. 4, AYKON TOWER, SECTOR- 135, NOIDA,
GAUTAM BUDDHA NAGAR, UTTAR PRADESH, 201304
UTTAR PRADESH,India-201304
[email protected]
9625214083

Dear Sir,

1.With reference to your Application, we are pleased to inform you that it has been decided to grant you licence as per details given below :

Product Category: Automatic Data Processing Machine


Product Name: Interactive Flat Panel (ADPM)
IS NO : IS 13252(PART 1):2010/ IEC 60950-1 : 2005
Brand STUDYNLEARN
(As Declared by Manufacturer)
:
Model : [Brand -> STUDYNLEARN, Models -> IS-IFPSeries 65, IS-IFPSeries 75, IS-IFPSeries 86]
Factory Address : 2ND FLOOR, PLOT NO. 4, AYKON TOWER, SECTOR- 135, NOIDA, GAUTAM BUDDHA NAGAR, UTTAR PRADESH, 201304
UTTAR PRADESH,India-201304

2. The licence is being granted for your unit located at the address and for the brand and models mentioned at serial no 1 above.

3. The number assigned to this Licence is R-93026816 which has been made operative from 09-08-2023 and is valid upto 08-08-2025 . The Licence Number should invariably
be referred to in your future correspondence.

4. The rights and privileges under the licence shall not be exercised by any other factory / organization at any other location. This licence is not transferable. In the event of
shifting of the manufacturing machinery from the registered premises to some other place use of the licence Number shall be stopped and BIS shall be informed.

5. The licensee shall comply with the provisions of the Act, rules and regulations framed thereunder and as amended from time to time.

6. The licensee shall follow the guidelines for the use of Standard Mark and labeling requirements as per Annex-I.

7. The licensee shall not use the licence in any manner which contravenes the provisions of Act, rules and regulations framed thereunder and as amended from time to time.

8. Upon expiry of validity, stoppage or suspension or cancellation of licence, you shall discontinue forthwith the self declaration of conformity to the relevant Indian Standard(s)
and withdraw all promotional and advertising matter which contains any reference thereto.

9. For renewal of licence, the licensee shall have to apply to BIS three months in advance before expiration of the licence and application form for renewal is available on BIS
website.

10. The licence is not transferable. Kindly acknowledge receipt of this letter.

Thanking you,

Yours faithfully,
(Jainendra Kumar)
Scientist-D
Telfax : +91-11-23230856
E-mail: [email protected]

Note: This is a system generated letter. Hence signature is not required.


To verify authentication of letter, kindly scan the QR code on this letter.
Annex - 1

The guidelines for use of Standard Mark for Scheme-C are per 3(1) of BIS (Conformity Assessment) Regulations,2017 are given below:

i) The monogram of the 'Standard Mark' consists of the pictorial representation, drawn in the exact style as indicated in the figure in the figure in Annexure I. Its photograpic
reductin and enlargement is permitted.

ii)The 'Standard Mark' can be displayed in single colour or multi-colour as per the details given below. The colour scheme for the Standard Mark to be used in multi colur shall
be use as indicated below.

iii) The licensee shall diplay the 'Standard Mark' on the article and/or the packaging, as the case may be, in a manner so as to be easily visible. It shall be legible, indelible and
non-remobable. Further, the durability of marking shall be as per the provisions of the relevant Indian Standard, wherever applicable. The diplay of IS number, Registration
number and words shall not be less than Arial forn size 6.

iv) Any device with a integrated display sceen may present the Standard Mark electronically (e-labelling) in lieu of a physical presentation on the product.
For details information on BIS, consult the e-BIS Portal (www.manakonline. in).
Please use BIS CARE APP for verification of ISI-marked goods and hallmarked gold jewellery.

You might also like