1

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in Electronics and Telecommunication Engineering (TCE)
Scheme of Teaching and Examinations 2021
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(Effective from the academic year 2021 - 22)
III SEMESTER
Teaching Hours /Week Examination

Department (TD)

Board (PSB)
and Question
Paper Setting

Self -Study
Practical/
Teaching

Drawing
Tutorial

Total Marks
Lecture

Duration in
Theory

CIE Marks

SEE Marks

Credits
Sl. Course and
Course Title

hours
No Course Code

L T P S
BSC Mathematics Course TD- Maths
03 50 50 100 3
1 21MAT31 (Common to all) PSB-Maths
IPCC TD: ECE
2 Digital System Design using Verilog 3 0 2 03 50 50 100 4
21EC32 PSB: ECE
IPCC TD: ECE
3 Basic Signal Processing 3 0 2 03 50 50 100 4
21EC33 PSB: ECE
PCC TD: ECE
4 Analog Electronic Circuits 3 0 0 1 03 50 50 100 3
21EC34 PSB: ECE
PCC TD: ECE
5 Analog and Digital Electronics Lab 0 0 2 03 50 50 100 1
21ECL35 PSB: ECE
UHV Any Department
6 Social Connect and Responsibility 0 0 1 01 50 50 100 1
21UH36
HSMC
Samskrutika Kannada
21KSK37/47
HSMC
Balake Kannada TD and PSB
7 21KBK37/47 1 0 0 01 50 50 100 1
HSMC
OR
HSMC Constitution of India and
21CIP37/47 Professional Ethics
TD: Concerned If offered as Theory Course
01
AEC department 1 0 0
8 Ability Enhancement Course - III 50 50 100 1
21EC38X PSB: Concerned If offered as lab. course
Board 02
0 0 2
Total 400 400 800 18

All students have to register for any one of the course namely
NMDC National Service Scheme
NSS National Service Scheme, Physical Education (PE)(Sports and
21NS83 (NSS) Athletics) and Yoga with the concerned coordinator of the course
Scheduled activities for
III to VIII semesters

during the first week of III semester. The activities shall be carried
NMDC Physical Education out between III semester to VIII semester (for 5 semesters). SEE in
PE
21PE83 (PE)(Sports and Athletics) the above courses shall be conducted during VIII semester
9
examinations and the accumulated CIE marks shall be added to the
SEE marks. Successful completion of the registered course is
NMDC mandatory for the award of the degree.
21YO83 Yoga Yoga The events shall be appropriately scheduled by the colleges and the
same shall be reflected in the calendar prepared for the NSS, PE and
Yoga activities.
Course prescribed to lateral entry Diploma holders admitted to III semester B.E./B.Tech programs
NCMC
1 Additional Mathematics - I Maths 02 02 -- -- --- 100 --- 100 0
21MATDIP31
Note: BSC: Basic Science Course, IPCC: Integrated Professional Core Course, PCC: Professional Core Course, INT –Internship, HSMC: Humanity and
Social Science & Management Courses, AEC–Ability Enhancement Courses. UHV: Universal Human Value Course.
L –Lecture, T – Tutorial, P- Practical/ Drawing, S – Self Study Component, CIE: Continuous Internal Evaluation, SEE: Semester End Examination.TD-
Teaching Department, PSB: Paper Setting department
21KSK37/47 Samskrutika Kannada is for students who speak, read and write Kannada and 21KBK37/47 Balake Kannada is for non-Kannada speaking,
reading, and writing students.
Integrated Professional Core Course (IPCC): Refers to Professional Theory Core Course Integrated with practical of the same course. Credit for IPCC
can be 04 and its Teaching–Learning hours (L : T : P) can be considered as (3 : 0 : 2) or (2 : 2 : 2). The theory part of the IPCC shall be evaluated both
by CIE and SEE. The practical part shall be evaluated by only CIE (no SEE). However, questions from the practical part of IPCC shall be included in the
SEE question paper. For more details, the regulation governing the Degree of Bachelor of Engineering /Technology (B.E./B.Tech.) 2021-22 may be
referred.

JBOS28022022/EC09032022/KM
 2

21INT49Inter/Intra Institutional Internship: All the students admitted to engineering programs under the lateral entry category shall have to undergo
a mandatory 21INT49 Inter/Intra Institutional Internship of 03 weeks during the intervening period of III and IV semesters. The internship shall be
slated for CIE only and will not have SEE. The letter grade earned through CIE shall be included in the IV semester grade card. The internship shall be
considered as a head of passing and shall be considered for vertical progression and for the award of degree. Those, who do not take up / complete
the internship shall be declared fail and shall have to complete during subsequently after satisfying the internship requirements. The faculty
coordinator or mentor shall monitor the students’ internship progress and interact with them for the successful completion of the internship.

Non–credit mandatory courses (NCMC):

(A) Additional Mathematics I and II:
(1)These courses are prescribed for III and IV semesters respectively to lateral entry Diploma holders admitted to III semester of B.E./B.Tech.,
programs. They shall attend the classes during the respective semesters to complete all the formalities of the course and appear for the Continuous
Internal Evaluation (CIE). In case, any student fails to register for the said course/fails to secure the minimum 40 % of the prescribed CIE marks,
he/she shall be deemed to have secured an F grade. In such a case, the student has to fulfill the course requirements during subsequent semester/s
to earn the qualifying CIE marks. These courses are slated for CIE only and have no SEE.
(2) Additional Mathematics I and II shall not be considered for vertical progression as well as for the calculation of SGPA and CGPA, but completion of
the courses shall be mandatory for the award of degree.
(3)Successful completion of the courses Additional Mathematics I and II shall be indicated as satisfactory in the grade card. Non-completion of the
courses Additional Mathematics I and II shall be indicated as Unsatisfactory.
(B) National Service Scheme/Physical Education (Sport and Athletics)/ Yoga:
(1) Securing 40 % or more in CIE,35 % or more marks in SEE and 40 % or more in the sum total of CIE + SEE leads to successful completion of the
registered course.
(2) In case, students fail to secure 35 % marks in SEE, they have to appear for SEE during the subsequent examinations conducted by the University.
(3) In case, any student fails to register for NSS, PE or Yoga/fails to secure the minimum 40 % of the prescribed CIE marks, he/she shall be deemed to
have not completed the requirements of the course. In such a case, the student has to fulfill the course requirements during subsequent semester/s
to earn the qualifying CIE marks.
(4) Successful completion of the course shall be indicated as satisfactory in the grade card. Non-completion of the course shall be indicated as
Unsatisfactory.
(5) These courses shall not be considered for vertical progression as well as for the calculation of SGPA and CGPA, but completion of the courses shall
be mandatory for the award of degree.
Ability Enhancement Course - III
21EC381 LD (Logic Design) Lab using Pspice / MultiSIM 21EC383 LIC (Linear Integrated Circuits) Lab using Pspice / MultiSIM
21EC382 AEC (Analog Electronic Circuits) Lab 21EC384 LabVIEW Programming Basics

JBOS28022022/EC09032022/KM
 3

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in Electronics and Telecommunication Engineering (TCE)
Scheme of Teaching and Examinations 2021
Outcome-Based Education (OBE) and Choice Based Credit System (CBCS)
(Effective from the academic year 2021 - 22)
IV SEMESTER
Teaching Hours /Week Examination

Department (TD)

Board (PSB)
and Question
Paper Setting

Self -Study
Practical/
Teaching

Drawing
Tutorial

Total Marks
Lecture

Duration in
Theory

CIE Marks

SEE Marks

Credits
Sl. Course and
Course Title

hours
No Course Code

L T P S
BSC
1 Maths for Communication Engineers TD, PSB-Maths 03 50 50 100 3
21EC41
IPCC TD: ECE 100 4
2 Digital Signal Processing 3 0 2 03 50 50
21EC42 PSB: ECE
IPCC TD: ECE 100 4
3 Circuits & Controls 3 0 2 03 50 50
21EC43 PSB: ECE
PCC TD: ECE 100 3
4 Communication Theory 3 0 0 1 03 50 50
21EC44 PSB: ECE
AEC BT, CHE, PHY 100 2
5 Biology For Engineers 2 0 0 02 50 50
21BE45
PCC TD: ECE 100 1
6 Communication Laboratory I 0 0 2 03 50 50
21ECL46 PSB: ECE
HSMC
Samskrutika Kannada
21KSK37/47
HSMC
Balake Kannada
7 21KBK37/47 HSMC 1 0 0 01 50 50 100 1
OR
HSMC Constitution of India & Professional
21CIP37/47 Ethics
TD and PSB: If offered as theory Course
01
AEC Concerned 1 0 0
8 Ability Enhancement Course- IV 50 50 100 1
21EC48X department If offered as lab. course
02
0 0 2
9 UHV Any
Universal Human Values 1 0 0 01 50 50 100 1
21UH49 Department
Completed during the
intervening period ofII and
III semesters by students
Evaluation By
admitted to first year of
INT the
10 Inter/Intra Institutional Internship BE./B.Tech and during the 3 100 -- 100 2
21INT49 appropriate
intervening period of III
authorities
and IV semesters by
Lateral entry students
admitted to III semester.
Total 550 450 1000 22

Course prescribed to lateral entry Diploma holders admitted to III semester of Engineering programs
NCMC
1 Additional Mathematics - II Maths 02 02 -- -- -- 100 -- 100 0
21MATDIP41
Note: BSC: Basic Science Course, IPCC: Integrated Professional Core Course, PCC: Professional Core Course, AEC –Ability Enhancement Courses,
HSMC: Humanity and Social Science and Management Courses, UHV- Universal Human Value Courses.
L –Lecture, T – Tutorial, P- Practical/ Drawing, S – Self Study Component, CIE: Continuous Internal Evaluation, SEE: Semester End Examination.
21KSK37/47 Samskrutika Kannada is for students who speak, read and write Kannada and 21KBK37/47 Balake Kannada is for non-Kannada speaking,
reading, and writing students.
Integrated Professional Core Course (IPCC): Refers to Professional Theory Core Course Integrated with Practicals of the same course. Credit for IPCC
can be 04 and its Teaching – Learning hours (L : T : P) can be considered as (3 : 0 : 2) or (2 : 2 : 2). The theory part of the IPCC shall be evaluated both
by CIE and SEE. The practical part shall be evaluated by only CIE (no SEE). However, questions from practical part of IPCCshall be included in the SEE
question paper.For more details the regulation governing the Degree of Bachelor of Engineering /Technology (BE/B.Tech.) 2021-22 may be referred.

JBOS28022022/EC09032022/KM
 4

Non – credit mandatory course (NCMC):

Additional Mathematics - II:
(1) Lateral entry Diploma holders admitted to III semester of B.E./B.Tech., shall attend the classes during the IV semester to complete all the
formalities of the course and appear for the Continuous Internal Evaluation (CIE). In case, any student fails to register for the said course/fails to
secure the minimum 40 % of the prescribed CIE marks, he/she shall be deemed to have secured an F grade. In such a case, the student has to fulfill
the course requirements during subsequent semester/s to earn the qualifying CIE marks. These courses are slated for CIE only and have no SEE.
(2) Additional Mathematics I and II shall not be considered for vertical progression as well as for the calculation of SGPA and CGPA, but completion of
the courses shall be mandatory for the award of degree.
(3)Successful completion of the course Additional Mathematics II shall be indicated as satisfactory in the grade card. Non-completion of the courses
Additional Mathematics II shall be indicated as Unsatisfactory.
Ability Enhancement Course - IV
21EC481 Embedded C Basics 21EC483 Octave / Scilab for Signals
21EC482 C++ Basics 21EC484 DAQ using LabVIEW

Internship of 04 weeks during the intervening period of IV and V semesters; 21INT68Innovation/ Entrepreneurship/ Societal based Internship.
(1)All the students shall have to undergo a mandatory internship of 04 weeks during the intervening period of IV and V semesters. The internship
shall be slated for CIE only and will not have SEE. The letter grade earned through CIE shall be included in the VI semester grade card.The internship
shall be considered as a head of passing and shall be considered for vertical progression and for the award of degree. Those, who do not take up /
complete the internship shall be considered under F (fail) grade and shall have to complete during subsequently after satisfying the internship
requirements.
(2)Innovation/ Entrepreneurship Internship shall be carried out at industry, State and Central Government /Non-government organizations (NGOs),
micro, small and medium enterprise (MSME), Innovation centres or Incubation centres. Innovation need not be a single major breakthrough; it can
also be a series of small or incremental changes. Innovation of any kind can also happen outside of the business world.
Entrepreneurship internships offers a chance to gain hands on experience in the world of entrepreneurship and helps to learn what it takes to run a
small entrepreneurial business by performing intern duties with an established company. This experience can then be applied to future business
endeavours. Start-ups and small companies are a preferred place to learn the business tack ticks for future entrepreneurs as learning how a small
business operates will serve the intern well when he/she manages his/her own company. Entrepreneurship acts as a catalyst to open the minds to
creativity and innovation. Entrepreneurship internship can be from several sectors, including technology, small and medium-sized, and the service
sector.
(3) Societal or social internship.
Urbanization is increasing on a global scale; and yet, half the world’s population still resides in rural areas and is devoid of many things that urban
population enjoy. Rural internship is a work-based activity in which students will have a chance to solve/reduce the problems of the rural place for
better living.
As proposed under the AICTE rural internship programme, activities under Societal or social internship, particularly in rural areas, shall be considered
for 40 points under AICTE activity point programme.

JBOS28022022/EC09032022/KM
 5

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in Electronics and Telecommunication Engineering (TCE)
Scheme of Teaching and Examinations 2021
Outcome Based Education (OBE) and Choice Based Credit System (CBCS)
(Effective from the academic year 2021 - 22)
V SEMESTER
Teaching Hours /Week Examination

Department (TD)

Board (PSB)
and Question
Paper Setting

Self -Study
Practical/
Teaching

Drawing
Tutorial

Total Marks
Lecture

Duration in
Theory

CIE Marks

SEE Marks

Credits
Sl. Course and
Course Title

hours
No Course Code

L T P S
BSC TD: ECE
1 Digital Communication 3 0 0 1 03 50 50 100 3
21EC51 PSB: ECE
IPCC Object Oriented Programming TD: ECE, CSE
2 3 0 2 03 50 50 100 4
21EC52 with Java & Data Structures PSB: ECE
PCC Computer Communication TD: ECE
3 3 0 0 1 03 50 50 100 3
21EC53 Networks PSB: ECE
PCC TD: ECE
4 Microwave Theory & Antennas 3 0 0 03 50 50 100 3
21EC54 PSB: ECE
PCC
5 Communication Lab II 0 0 2 03 50 50 100 1
21ECL55
TD: Any
Department
AEC Research Methodology &
6 PSB: As 2 0 0 02 50 50 100 2
21EC56 Intellectual Property Rights
identified by
University
TD: Civil/
HSMC Environmental
7 21CIV57 Environmental Studies /Chemistry/ 1 0 0 1 50 50 100 1
Biotech.
PSB: Civil Engg
If offered as Theory courses
01
AEC Concerned 1 0 0
8 Ability Enhancement Course-V 50 50 100 1
21EC58X Board If offered as lab. courses
02
0 0 2
Total 400 400 800 18
Ability Enhancement Course - V
21EC581 IoT (Internet of Things) Lab 21EC583 Antenna Design & Testing
21EC582 Communication Simulink Toolbox 21EC584 Microwaves toolbox

Note: BSC: Basic Science Course, PCC: Professional Core Course, IPCC: Integrated Professional Core Course, AEC –Ability Enhancement Course INT –
Internship, HSMC: Humanity and Social Science & Management Courses.
L –Lecture, T – Tutorial, P- Practical/ Drawing, S – Self Study Component, CIE: Continuous Internal Evaluation, SEE: Semester End Examination.
Integrated Professional Core Course (IPCC): refers to Professional Theory Core Course Integrated with Practical of the same course. Credit for IPCC
can be 04 and its Teaching – Learning hours (L : T : P) can be considered as (3 : 0 : 2) or (2 : 2 : 2). Theory part of the IPCC shall be evaluated both by
CIE and SEE. The practical part shall be evaluated by CIE only and there shall be no SEE. For more details the regulation governing the Degree of
Bachelor of Engineering /Technology (BE/B.Tech.) 2021-22 may be referred.

JBOS28022022/EC09032022/KM
 6

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in Electronics and Telecommunication Engineering (TCE)
Scheme of Teaching and Examinations 2021
Outcome-Based Education(OBE) and Choice Based Credit System (CBCS)
(Effective from the academic year 2021 - 22)
VI SEMESTER
Teaching Hours /Week Examination

Department (TD)

Board (PSB)
and Question
Paper Setting

Self -Study
Practical/
Teaching

Drawing
Tutorial

Total Marks
Lecture

Duration in
Theory

CIE Marks

SEE Marks

Credits
Sl. Course and
Course Title

hours
No Course Code

L T P S
HSMC Technological Innovation Any
1 3 0 0 0 03 50 50 100 3
21EC61 Management and Entrepreneurship Department
IPCC Computer Organization & ARM TD: ECE 4
2 3 0 2 03 50 50 100
21EC62 Microcontrollers PSB: ECE
PCC Wireless and Cellular TD: ECE 3
3 PSB: ECE 3 0 0 03 50 50 100
21TC63 Communication
PEC Professional Elective Course-I TD: ECE 3
4 03 50 50 100
21EC64x PSB: ECE
OEC Open Elective Course-I Concerned 3
5 03 50 50 100
21EC65x Department
PCC Wireless and Cellular 1
6 0 0 2 03 50 50 100
21TCL66 Communication Laboratory
Mini Project Two contact hours /week for
MP
7 interaction between the -- 100 -- 100 2
21TCMP67
faculty and students.
INT Innovation/Entrepreneurship Completed during the intervening period of IV
8 -- 100 -- 100 3
21INT68 /Societal Internship and V semesters.
Total 500 300 800 22

Professional Elective – I
21EC641 Artificial Neural Networks (L:T:P :: 2:2:0) 21EC643 Python Programming (L:T:P :: 2:0:2)
21EC642 Cryptography (L:T:P :: 2:2:0) 21EC644 Micro Electro Mechanical Systems (L:T:P :: 3:0:0)

Open Electives – I offered by the Department to other Department students

21EC651 Communication Engineering (L:T:P :: 3:0:0) 21EC653 Basic VLSI Design (L:T:P :: 3:0:0)
21EC652 Microcontrollers (L:T:P :: 3:0:0) 21EC654 Electronic Circuits with Verilog (L:T:P :: 2:0:2)
21EC655 Sensors & Actuators (L:T:P :: 3:0:0)

Note: HSMC: Humanity and Social Science & Management Courses, IPCC: Integrated Professional Core Course, PCC: Professional Core Course, PEC:
Professional Elective Courses, OEC–Open Elective Course, MP –Mini Project, INT –Internship.
L –Lecture, T – Tutorial, P - Practical / Drawing, S – Self Study Component, CIE: Continuous Internal Evaluation, SEE: Semester End Examination.

Integrated Professional Core Course (IPCC): Refers to Professional Theory Core Course Integrated with Practical of the same course. Credit for IPCC
can be 04 and its Teaching – Learning hours (L : T : P) can be considered as (3 : 0 : 2) or (2 : 2 : 2). The theory part of the IPCC shall be evaluated both
by CIE and SEE. The practical part shall be evaluated by CIE only and there shall be no SEE. For more details, the regulation governing the Degree of
Bachelor of Engineering /Technology (BE/B.Tech) 2021-22 may be referred.

Professional Elective Courses(PEC):

A professional elective (PEC) course is intended to enhance the depth and breadth of educational experience in the Engineering and Technology
curriculum. Multidisciplinary courses that are added supplement the latest trend and advanced technology in the selected stream of engineering.
Each group will provide an option to select one course out of five courses. The minimum students’ strength for offering professional electives is 10.
However, this conditional shall not be applicable to cases where the admission to the programme is less than 10.
Open Elective Courses:
Students belonging to a particular stream of Engineering and Technology are not entitled for the open electives offered by their parent Department.
However, they can opt an elective offered by other Departments, provided they satisfy the prerequisite condition if any. Registration to open
electives shall be documented under the guidance of the Program Coordinator/ Advisor/Mentor.
Selection of an open elective shall not be allowed if,
(i) The candidate has studied the same course during the previous semesters of the program.
(ii) The syllabus content of open electives is similar to that of the Departmental core courses or professional electives.
(iii) A similar course, under any category, is prescribed in the higher semesters of the program.

JBOS28022022/EC09032022/KM
 7

In case, any college is desirous of offering a course (not included in the Open Elective List of the University) from streams such as Law, Business
(MBA), Medicine, Arts, Commerce, etc., can seek permission, at least one month before the commencement of the semester, from the University by
submitting a copy of the syllabus along with the details of expertise available to teach the same in the college.
The minimum students’ strength for offering open electives is 10. However, this conditional shall not be applicable to cases where the admission to
the programme is less than 10.
Mini-project work: Mini Project is a laboratory-oriented course which will provide a platform to students to enhance their practical knowledge and
skills by the development of small systems/applications.
Based on the ability/abilities of the student/s and recommendations of the mentor, a single discipline or a multidisciplinary Mini- project can be
assigned to an individual student or to a group having not more than 4 students.
CIE procedure for Mini-project:
(i) Single discipline: The CIE marks shall be awarded by a committee consisting of the Head of the concerned Department and two faculty members
of the Department, one of them being the Guide. The CIE marks awarded for the Mini-project work shall be based on the evaluation of project report,
project presentation skill, and question and answer session in the ratio of 50:25:25. The marks awarded for the project report shall be the same for all
the batch mates.
(ii) Interdisciplinary: Continuous Internal Evaluation shall be group-wise at the college level with the participation of all the guides of the project.
The CIE marks awarded for the Mini-project, shall be based on the evaluation of project report, project presentation skill, and question and answer
session in the ratio 50:25:25. The marks awarded for the project report shall be the same for all the batch mates.
No SEE component for Mini-Project.

VII semester Class work and Research Internship /Industry Internship (21INT82)
Swapping Facility
Institutions can swap VII and VIII Semester Scheme of Teaching and Examinations to accommodate research internship/ industry internship after the
VI semester.
(2) Credits earned for the courses of VII and VIII Semester Scheme of Teaching and Examinations shall be counted against the corresponding
semesters whether VII or VIII semester is completed during the beginning of IV year or later part of IV year of the program.
Elucidation:
At the beginning of IV year of the programme i.e., after VI semester, VII semester classwork and VIII semester Research Internship /Industrial
Internship shall be permitted to be operated simultaneously by the University so that students have ample opportunity for internship. In other words,
a good percentage of the class shall attend VII semester classwork and similar percentage of others shall attend to Research Internship or Industrial
Internship.
Research/Industrial Internship shall be carried out at an Industry, NGO, MSME, Innovation centre, Incubation centre, Start-up, Centers of Excellence
(CoE), Study Centre established in the parent institute and /or at reputed research organizations / institutes. The intership can also be rural
internship.
The mandatory Research internship /Industry internship is for 24 weeks. The internship shall be considered as a head of passing and shall be
considered for the award of degree. Those, who do not take up/complete the internship shall be declared fail and shall have to complete during the
subsequent University examination after satisfying the internship requirements.
INT21INT82Research Internship/ Industry Internship/Rural Internship
Research internship: A research internship is intended to offer the flavour of current research going on in the research field. It helps students get
familiarized with the field and imparts the skill required for carrying out research.
Industry internship: Is an extended period of work experience undertaken by students to supplement their degree for professional
development. It also helps them learn to overcome unexpected obstacles and successfully navigate organizations, perspectives, and cultures. Dealing
with contingencies helps students recognize, appreciate, and adapt to organizational realities by tempering their knowledge with practical
constraints.
Rural internship: A long-term goal, as proposed under the AICTE rural internship programme, shall be counted as rural internship activity.
The student can take up Interdisciplinary Research Internship or Industry Internship.
The faculty coordinator or mentor has to monitor the students’ internship progress and interact with them to guide for the successful completion of
the internship.
The students are permitted to carry out the internship anywhere in India or abroad. University shall not bear any expenses incurred in respect of
internship.

JBOS28022022/EC09032022/KM
 8

VISVESVARAYA TECHNOLOGICAL UNIVERSITY, BELAGAVI

B.E. in Electronics and Telecommunication Engineering (TCE)
Scheme of Teaching and Examinations 2021
Outcome Based Education(OBE) and Choice Based Credit System (CBCS)
(Effective from the academic year 2021 - 22)
Swappable VII and VIII SEMESTER
VII SEMESTER
Teaching Hours /Week Examination

Department (TD)
and Question
Paper Setting
Board (PSB)

Self -Study
Practical/
Drawing
Tutorial
Teaching

Total Marks
Lecture

Duration in
Theory

CIE Marks

SEE Marks

Credits
Sl. Course and
Course Title

hours
No Course Code

L T P S
PCC TD: ECE
1 VLSI Circuits & Systems 3 0 0 3 50 50 100 3
21TC71 PSB: ECE
PCC Optical Communication and TD: ECE
2 2 0 0 3 50 50 100 2
21TC72 Optical networks PSB: ECE
PEC TD: ECE
3 Professional elective Course-II PSB: ECE 3 50 50 100 3
21EC72X
PEC TD: ECE
4 Professional elective Course-III PSB: ECE 3 50 50 100 3
21EC73X
OEC Concerned
5 Open elective Course-II 3 50 50 100 3
21EC74X Department
Project Two contact hours /week for
6 21TCP75 Project work interaction between the 3 100 100 200 10
faculty and students.
Total 350 350 700 24

VIII SEMESTER
Teaching Hours /Week Examination
Department

Self -Study
Practical/
Drawing
Tutorial
Teaching

Total Marks
Lecture

Duration in
Theory

CIE Marks

SEE Marks

Credits
Sl. Course and
Course Title
hours

No Course Code

L T P S
One contact hour /week for
Seminar
1 Technical Seminar interaction between the -- 100 -- 100 01
21TC81
faculty and students.
INT Research Internship/ Industry Two contact hours /week for 03
2 21INT82 Internship interaction between the (Batch 100 100 200 15
faculty and students. wise )
3 21NS83 National Service Scheme (NSS) NSS
Completed during the
21PE83 Physical Education (PE) (Sports
NCMC

PE intervening period of III -- 50 50 100 0

and Athletics)
semester to VIII semester.
21YO83 Yoga Yoga
Total 250 150 400 16

Professional Elective - II
21EC721 Advanced Design Tools for VLSI (L:T:P :: 2:0:2) 21EC724 Biomedical Signal Processing (L:T:P :: 3:0:0)
21EC722 Digital Image Processing (L:T:P :: 2:0:2) 21EC725 Speech Signal Processing (L:T:P :: 3:0:0)
21EC723 DSP Algorithms & Architecture (L:T:P :: 3:0:0)

Professional Elective - III

21EC731 IoT & Wireless Sensor Networks (L:T:P :: 3:0:0) 21EC734 Machine Learning with Python (L:T:P :: 2:0:2)
21EC732 Network Security (L:T:P :: 3:0:0) 21EC735 Multimedia Communication (L:T:P :: 2:0:2)
21EC733 Fabrication technology (L:T:P :: 3:0:0)

JBOS28022022/EC09032022/KM
 9

Open Electives - II offered by the Department to other Department students

21EC741 Optical & Satellite Communication (L:T:P :: 3:0:0) 21EC744 Basic Digital Signal Processing (L:T:P :: 2:0:2)
21EC742 ARM Embedded Systems (L:T:P :: 3:0:0) 21EC745 E-waste Management (L:T:P :: 3:0:0)
21EC743 Basic Digital Image Processing (L:T:P :: 2:0:2)
Note: PCC: Professional Core Course, PEC: Professional Elective Courses, OEC–Open Elective Course, AEC –Ability Enhancement Courses.
L –Lecture, T – Tutorial, P- Practical / Drawing, S – Self Study Component, CIE: Continuous Internal Evaluation, SEE: Semester End Examination.
Note: VII and VIII semesters of IV year of the programme
(1) Institutions can swap VII and VIII Semester Scheme of Teaching and Examinations to accommodate research internship/ industry internship after
the VI semester.
(2) Credits earned for the courses of VII and VIII Semester Scheme of Teaching and Examinations shall be counted against the corresponding
semesters whether VII or VIII semester is completed during the beginning of IV year or later part of IV year of the programme.
PROJECT WORK (21XXP75): The objective of the Project work is
(i) To encourage independent learning and the innovative attitude of the students.
(ii) To develop interactive attitude, communication skills, organization, time management, and presentation skills.
(iii) To impart flexibility and adaptability.
(iv) To inspire team working.
(v) To expand intellectual capacity, credibility, judgment and intuition.
(vi) To adhere to punctuality, setting and meeting deadlines.
(vii) To install responsibilities to oneself and others.
(viii)To train students to present the topic of project work in a seminar without any fear, face the audience confidently, enhance communication
skills, involve in group discussion to present and exchange ideas.
CIE procedure for Project Work:
(1) Single discipline: The CIE marks shall be awarded by a committee consisting of the Head of the concerned Department and two senior faculty
members of the Department, one of whom shall be the Guide.
The CIE marks awarded for the project work, shall be based on the evaluation of project work Report, project presentation skill, and question and
answer session in the ratio 50:25:25. The marks awarded for the project report shall be the same for all the batch mates.
(2) Interdisciplinary: Continuous Internal Evaluation shall be group-wise at the college level with the participation of all guides of the college.
Participation of external guide/s, if any, is desirable. The CIE marks awarded for the project work, shall be based on the evaluation of project work
Report, project presentation skill, and question and answer session in the ratio 50:25:25. The marks awarded for the project report shall be the same
for all the batch mates.
SEE procedure for Project Work: SEE for project work will be conducted by the two examiners appointed by the University. The SEE marks awarded
for the project work shall be based on the evaluation of project work Report, project presentation skill, and question and answer session in the ratio
50:25:25.
TECHNICAL SEMINAR (21XXS81): The objective of the seminar is to inculcate self-learning, present the seminar topic confidently, enhance
communication skill, involve in group discussion for exchange of ideas. Each student, under the guidance of a Faculty, shall choose, preferably, a
recent topic of his/her interest relevant to the programme of Specialization.
(i) Carry out literature survey, systematically organize the content.
(ii) Prepare the report with own sentences, avoiding a cut and paste act.
(iii)Type the matter to acquaint with the use of Micro-soft equation and drawing tools or any such facilities.
(iv) Present the seminar topic orally and/or through PowerPoint slides.
(v) Answer the queries and involve in debate/discussion.
(vi) Submit a typed report with a list of references.
The participants shall take part in the discussion to foster a friendly and stimulating environment in which the students are motivated to reach high
standards and become self-confident.
Evaluation Procedure:
The CIE marks for the seminar shall be awarded (based on the relevance of the topic, presentation skill, participation in the question and answer
session, and quality of report) by the committee constituted for the purpose by the Head of the Department. The committee shall consist of three
teachers from the department with the senior-most acting as the Chairman.
Marks distribution for CIE of the course:
Seminar Report:50 marks
Presentation skill:25 marks
Question and Answer: 25 marks. ∎No SEE component for Technical Seminar
Non – credit mandatory courses (NCMC):
National Service Scheme/Physical Education (Sport and Athletics)/ Yoga:
(1) Securing 40 % or more in CIE,35 % or more marks in SEE and 40 % or more in the sum total of CIE + SEE leads to successful completion of the
registered course.
(2) In case, students fail to secure 35 % marks in SEE, they has to appear for SEE during the subsequent examinations conducted by the University.
(3)In case, any student fails to register for NSS, PE or Yoga/fails to secure the minimum 40 % of the prescribed CIE marks, he/she shall be deemed to
have not completed the requirements of the course. In such a case, the student has to fulfill the course requirements during subsequently to earn the
qualifying CIE marks subject to the maximum programme period.
(4) Successful completion of the course shall be indicated as satisfactory in the grade card. Non-completion of the course shall be indicated as
Unsatisfactory.
(5) These course shall not be considered for vertical progression as well as for the calculation of SGPA and CGPA, but completion of the courses shall
be mandatory for the award of degree.

JBOS28022022/EC09032022/KM