Call Management System (CMS)

R18.0.2.0
Release Notes
Issue 1.9
February 12, 2018
CMS R18.0.2.0 Release Notes

TABLE OF CONTENTS

1. PURPOSE ...................................................................................................... 3
2. DOCUMENT CHANGE HISTORY ..................................................................... 3
3. CMS R18 FUNCTIONALITY ............................................................................. 4
3.1. CMS R18 PROVIDES SUPPORT FOR PRIOR CMS PLATFORMS & CONFIGURATIONS. .....................................................4
3.2. TENANT DATA ACCESS CONTROLS.......................................................................................................................4
3.3. TIME ZONE DATA ARCHIVING ENHANCEMENTS ......................................................................................................4
3.4. THIRD PARTY SOFTWARE REFRESH ......................................................................................................................4
3.5. WEB CLIENT IMPROVEMENTS ............................................................................................................................4
3.6. CM 7 SUPPORT ...............................................................................................................................................5
3.7. CMS R18 RESOLVED ISSUES AND OTHER IMPROVEMENTS ......................................................................................5
3.8 . INTEGRATED REPORTS CHANGES ...........................................................................................................................5

4. CMS R18.0.0.1 FUNCTIONALITY .................................................................... 5

4.0. NEW FUNCTIONALITY IN 18.0.0.1.............................................................................................................................5
4.1. BUGS FIXED IN 18.0.0.1..........................................................................................................................................5

5. CMS R18.0.0.2 FUNCTIONALITY .................................................................... 7

5.1 NEW FUNCTIONALITY IN 18.0.0.2 ..............................................................................................................................7
5.2 BUGS FIXED IN 18.0.0.2 ...........................................................................................................................................7
5.3 KNOWN ISSUES IN CMS R18.0.0.2 ............................................................................................................................8

6. CMS R18.0.1.0 .............................................................................................. 8

6.1 NEW FUNCTIONALITY IN18.0.1.0 ...............................................................................................................................8
6.2 BUGS FIXED IN 18.0.1.0 ...........................................................................................................................................8

7. CMS R18.0.2.0 ............................................................................................ 10

7.1 NEW FUNCTIONALITY IN18.0.2.0 .............................................................................................................................10
7.2 BUGS FIXED IN 18.0.2.0 .........................................................................................................................................11

8. SOFTWARE DOWNLOAD INSTRUCTIONS .................................................... 12

APPENDIX A: PATCH INSTALLATION INSTRUCTIONS ......................................... 13
APPENDIX B: LINUX RPMS INCLUDED IN CMS R18.0.2.0 .................................... 14

May 23, 2018 2

 CMS R18.0.2.0 Release Notes

1. Purpose
The release notes provide information about the GA version of the Call Management System (CMS) R18
software. The release notes include last minute information that is not incorporated into the standard
documentation as well as a very high level of the release content.

For details about the features included in CMS R18 please see the product documentation posted at
http://support.avaya.com.

The following table describes the release details:

NOTE: With CMS R18.0.2.0 only Linux versions of CMS are provided.

Product Version Required Patch or PSN

Call Management 700513680 - CMS Server – r18Lma.k (for Linux platforms) None
System 700513682 - additionally required for Linux Platforms (Kickstart DVD)
R18.0.2.0 700514083 – CMS R18.0.2.0 CUE Linux DVD
CMS Supervisor Web – cmsweb18ma.k (for Linux) None

CMS Supervisor PC Client– R18 MA48 None

2. Document Change History

Issue Number Date Comment
1.0 2 October 2015 Initial Release of R18.0.0.0
1.1 13 October 2015 Added information about minimum 10 second
refresh rate for R18 Integrated reports.
Provided additional information on Designer
report issues in section 5.1
1.2 14 March 2016 Added information on 18.0.0.1 Service Pack- Bug
fix release
1.3 11 July 2016 Add information on 18.0.0.2 Service Pack
1.4 16 January 2017 Remove mention of new LAN backup version
support. Newer LAN backup software support has
been delayed to the 18.0.1.0 Feature Pack.
1.5 30 January 2017 Updated section 1 to note the latest supported
Supervisor PC client is version MA.27
1.6 12 June 2017 Updated for R18.0.1.0
1.7 15 June 2017 Updated to note new CMS Supervisor PC client
availability to fix login problem.
1.8 11 September 2017 Updated notes to reflect changes delivered in
CMS Supervisor PC client version MA41.
1.9 12 February 2018 Updated for 18.0.2.0 feature pack changes.

May 23, 2018 3

CMS R18.0.2.0 Release Notes

3. CMS R18 Functionality

3.1. CMS R18 Provides support for Prior CMS Platforms & Configurations.
The CMS R18 release delivers the following features:

• Support upgrades to the Oracle T4 and Oracle x4270 as well as upgrades to Dell 620 and
Dell 720 platforms.
• Support for new sales on the Dell R220, Dell R630, Dell R730, and HPE DL380 G9
platforms.
o Beginning with R18.0.0.2 the HP DL20 will be supported for new sales
• Continued support for virtualized deployment on VMWare, this includes new sales and
upgrades to existing VMWare deployments.
• All other previously sold Oracle servers not mentioned above are not supported for
upgrade.
• New platforms will be sold headless (no Video, Keyboard, Mouse included with
platform). Linux moves to an ASCII-only console.

3.2. Tenant Data Access Controls

Tenant Data Access extends the current CMS user data access management features.

• Allowing service providers to partition an ACD to be used by multiple tenants/customers

• Allowing business units sharing the same ACD to manage and have access to their own
data.
• Updated Permission checking

3.3. Time Zone Data archiving enhancements

New time zone data archiving extends the current CMS time zone archiving and reporting
capabilities.
• Allows additional aggregation of the interval data based on the time zone of the
associated tenant.
• Allows one additional time zone aggregation of the interval data for each ACD

3.4. Third Party Software refresh

The CMS R18 release includes Informix version 12 along with data compression.
Java is upgraded to version 8 and Tomcat is version 10.
Linux deployments are version 6.6.
Solaris deployments continue to be Solaris 10

3.5. Web Client Improvements

CMS Web is updated and enhanced to provide the following operations
• Support for Integrated reports

May 23, 2018 4

CMS R18.0.2.0 Release Notes

• Support for limited administration. CMS Web will allow for agent skill changes.
• Update the look and feel based on usability studies.

3.6. CM 7 support
The following features are available only with CMS integration with CM 7
• Support for the new Attribute data field available on the Agent form in CM 7
• Support for 24,000 measured trunks
• Support for 360,000 agent skill pairs
• Support for 2000 location IDs

3.7. CMS R18 Resolved Issues and Other Improvements

Beginning with CMS R18, capacities information can now be found in the CMS Overview and
Specifications document posted on support.avaya.com. The CMS Capacities document is no
longer available as a separate document.

The CMS R18 release includes the following fixes:

• Move user passwords over during CUE or Platform Upgrade processes from existing
CMS systems.
• Update Free Space Allocation screen to account for data compression with Informix 12
• Improve Supervisor Web to properly check for all expired user passwords.
• Fix issues with grid rotation and columnar tables in Supervisor Web client.
• Add search to Supervisor Web client
• Maintenance backups to NFS will now send an error to elog when device is not
available.

3.8. Integrated Reports changes

Beginning with CMS R18, Integrated reports will query the historical database more frequently
in order to provide more accurate data to the user.
As a result of this change, the minimum refresh rate for Integrated reports will be 10 seconds.

4. CMS R18.0.0.1 Functionality

4.0. New Functionality in 18.0.0.1
The Mobile App is available on 18.0.0.1

4.1. Bugs fixed in 18.0.0.1

The following CMS Server fixes have been added to CMS R18.0.0.1

• Corrected VDN & Vector Interval Call Data Overruns

• Incorrect data formatting on reports due to resizing changes

May 23, 2018 5

CMS R18.0.2.0 Release Notes

• Correction reverts the password complexity rules back the RHEL defaults
• Added support PAM authentication mechanism to authenticate the user
• Fixed memory leak in query log
• Fixed wrong value for start time for the first interval after a day boundary with
integrated reports
• Fixed Tomcat deadlock Issue
• Fixed Group by functionality for Custom interval report with no default TZ defined
• Updated Database upgrade script to be re-executable
• Fixed Process Dying during a migration
• Corrected Issues with TZ reporting on Multi Table Join
• Corrections to Agent Trace with SLM implemented on the CM
• An agents hangs up first in a call that came to its reserve skill and it's not being counted
as agent released
• Corrected CMS handling of ACDTIME with a "reverse" conference
• Agent Released was not set correctly with a SIP refer/replace call scenario
• Corrected OCW Information in Real Time Report
• Fixed issues seen If a call was queued to more than one skill and it was path replace
transferred to a call on an unmeasured trunk
• Netbackup updated to use straight file list of the file systems to be backed up
• Introduced two more alarms for elog process
• Netconfig Enhanced to handle NICs on different subnets
• When configuring more NICs, netconfig now adds to the /etc/Hosts

The following CMS Supervisor Web fixes have been added to CMS R18.0.0.1 :
• Reports updated to support multiple word fonts, single quote, keywords in quotes
• Corrected Incorrect parsing of report definitions for integrated reports
• Updated Client to display database error messages when they occur
• Enhanced Error Handling
• Updated the minimum refresh for web integrated reports to 10 seconds
• Added robustness fix for Designer Integrated reports for Vector, Skill and VDN
• Updated logging to ensure Passwords were not logged in plain text
• Updated web client custom report to allow the selection of any Aux reason code
synonyms and provide a menu for browsing the administered synonyms
• Corrected Formatting on some integer fields that are stored as time/duration fields

The following CMS Supervisor PC fixes have been added to CMS R18.0.0.1 :
• Updated Supervisor to correctly enforce private report permissions
• SSH login process fixed to correctly clean up environment
• Updated the Skills column of the change agent skills dialog to be wide enough to show
the full skill name
• Client updated to support response the Linux systems returns for Password Already
used
• When TE opens existing profile for telnet connection it now retains the configured port

May 23, 2018 6

CMS R18.0.2.0 Release Notes

• Exception Admin forms updated to show "Time Limit" translation correctly

• TE install updated to conclude with a “Finish” dialog
• Report inputs (e.g. Historical Trunk Daily) updated to support both the older and newer
format of trunk id's
• Updated Help to display for Threshold Settings

5. CMS R18.0.0.2 Functionality

5.1 New Functionality in 18.0.0.2
• Support for the HP DL20 G9 server for all new orders.

5.2 Bugs fixed in 18.0.0.2

The following CMS Server fixes have been added to CMS R18.0.0.2:
• Cannot create a new custom report by copying an existing Agent Group report.
• Intermittent login failures with web client interface.
• In many cases, existing Designer Reports were not running properly with R18 in either
the Web Client or Supervisor PC client, or both. Improvements have been included in
18.0.0.2 to eliminate these issues. Examples of specifically reported issues that have
been resolved are:
o Interval historical report is empty or blank when date field and VDN name
contain the same word.
o Designer report failed to execute when report input field contained both a
comma and apostrophe
o Some Designer reports failing to execute where report queries are complex
and/or report definition had manual edits to the database queries.

The following CMS Supervisor Web fixes have been added to CMS R18.0.0.2 :
• When Tenant Partitioning is installed, normal web client users were blocked from
executing some Designer Reports.
• Agent Real Time report not available in user menu in Web Client, for some users.
• Web Client usage, over time, can cause CMS server CPU occupancy to increase and
never reduce.
• Web Client Split/Skill Report data from one column can merge or overlap into the
adjacent column.

The following CMS Supervisor PC fixes have been added to CMS R18.0.0.2:
• In some non-English languages, a range of VDNs was not accepted as input for reports.
With this fix comes improved handling of 64-bit data types in report input processing for
Supervisor PC client and Network Reporting.

May 23, 2018 7

CMS R18.0.2.0 Release Notes

5.3 Known Issues in CMS R18.0.0.2

1. CMS Supervisor PC client can experience issues when connecting to the CMS server if a
user’s password has automatically expired. While Avaya works to resolve this issue, a
workaround has been provided. The workaround is a one line manual change to a file on
the CMS server.
NOTE: this issue is resolved with CMS R18.0.1.0 and later versions.

6. CMS R18.0.1.0
6.1 New Functionality in18.0.1.0
CMS R18.0.1.0 provides the following features:
• Dual IP: The ability to administer two IP addresses for the same ACD, to facilitate
Communication Manager failover to ESS or LSP
• LAN Backup updates: Support for Veritas Netbackup 7.7.3 and IBM Spectrum Protect
7.1.4 (Note that IBM Spectrum Storage Protect was formerly known as Tivoli Storage
Manager).

6.2 Bugs Fixed in 18.0.1.0

The following CMS Server fixes have been added to CMS R18.0.1.0:
• A message indicating successful completion of Tivoli restore has been added to the
restore.log file
• Failure of Non-EAS multi-agent skill change failed with CMS R18 and CM 7.x have been
resolved.
• In some circumstances multiple duplicate rows will appear in Integrated Reports. The
duplicate rows have been eliminated.
• Running the Forecast Manager resulted in a daily false alarm. The false alarm has
been removed.

• The CMS call handling code assumed an agent’s hold ended when the CM changed
trunks without the agent’s knowledge. This has been corrected so the hold is still
tracked after CM generated transfers.
• When an agent logged out before a call they were on was recorded, an extra row was
written to the hagent table with a tenant ID of 0. This has been fixed so no extra row
with the wrong tenant ID is written to the hagent table.
• In some of the SIP refer/replace call scenarios with Experience Portal use, the call was
marked as having the agent releasing first. This is now fixed so it will correctly show
the caller hanging up first.
• When multi-tenancy was activated, some non-tenant users were receiving errors
when running some reports.

May 23, 2018 8

CMS R18.0.2.0 Release Notes

• For Solaris SPARC CMS implementations only, several cumulative data measures in
the HVECTOR and HVDN tables were always 0. The correct values are now written
into the database.
• When agent trace is turned on or off for an agent before they log into the system, a
core dump was created. The correction allows agent trace to be turned on or off at
any time whether the agent is currently logged in or not.
• CMS real time processing can restart when a Designer report is executed that has an
exceptionally long 'where' clause and contains another predicate word after the
predicate word 'IN'.
• A complicated set of transfers used to connect calls routed by an application in Avaya
Experience Portal caused problems in the CMS call handling code. That has been
corrected.
• When database allocated space in a large CMS virtualized deployment exceeds 2
terabytes, various problems occur. This has been corrected to now allow up to 4
terabytes of free space in the large virtualized deployment.

The following CMS Supervisor Web fixes have been added to CMS R18.0.1.0 :
• Designer reports executed in CMS Web client displayed data incorrectly when the
report had a "Totals" row. The report did not display the rows of data that make up the
totals either above or below the totals line.
• The CMS Web client will now display an error message with the name of the missing
calculation if a dictionary calculation is not present in the dictionary, allowing the
customer to correct the problem.
• Real time reports may stop refreshing when executed in the CMS Web client.
• Designer reports executed in CMS Web client interface used wrong Russian Language
encoding. Correct encoding now used. Details covered in PSN004823
• Reports will fail when executed in CMS Web client if a data item in a select contains an
expression that contains a calculation.

The following CMS Supervisor PC fixes have been added to CMS R18.0.1.0:
• 11 September 2017: the following fixes are included in CMS PC Supervisor.
o Some Designer Integrated Reports displaying incorrect number of rows in CMS Web
where report includes Integrated and Real Time components.
o When creating a new report using report Wizard, headings did not display properly on
CMS Web.
o A Report created using Report Designer, where input was set as multi-acd for split/skill,
failed to open in CMS Web
o CMS Web does not show the chart when the sync value on an Integrated Report is
changed, the chart will not be updated with the new sync value while split/skills sync is
changed.
o The following 2 server messages were not translated into non-English languages
you have no permission for the cwc(s)
you have no permission for the tenant(s)

May 23, 2018 9

CMS R18.0.2.0 Release Notes

o For Integrated Reports (both Standard and Designer), the report refresh at 00:00
hours is now functioning properly.
• Added 15 June 2017:
o Problems are resolved where Integrated Reports in CMS R18 Supervisor PC
client, would stop updating.
• In CMS Supervisor, using the browse button allowed a tenant user to see dictionary
information for other tenants. Changes were not allowed, but the user could view the
dictionary information. This has been corrected and tenant users can no longer view
dictionary items for other tenants.
• The Australia/Brisbane time zone has been added as a choice in the default time zone
menu
• For the Historical -> Agent -> Group AUX Monthly report, executed in a CMS R18
Supervisor client when executing against a CMS R18 server, the date-based selection
will pop-up instead of the month-based selection.
• CMS Supervisor now provides more clear and correct messages to the user when
logging in with an expired password.
• The data type is now pre-selected for Start and End time fields in the Call Records
Report : "Report" menu, "Design" option.
• A Call Work Code search will now return proper information when the search uses 3
digit CWCs separated with a dash (example: 311-313).
• Report-> Historical-> Split/Skill->Preferred Skill Level Summary Daily/Monthly/Weekly
report column header now displaying properly as “ % Agent Surplus Preferred Skill level
Calls” instead of displaying internal software name.
• For 32bit Windows 7, custom values in the HKCU\SOFTWARE\Avaya\Supervisor\18.0 are
no longer overwritten. There was never a problem with 64 bit Windows 7.
• Users can now create scripts for Tenant administration.

Known Issues with CMS Supervisor PC in CMS R18.0.1.0:

• Added 15 June 2017: For Integrated Reports (both Standard and Designer), the report
refresh at 00:00 hours is not functioning properly. For any Integrated Report that is
running when the time changes from 23:59 to 00:00 that Integrated Report should be
stopped and restarted after 00:00 to avoid issues. The time referred to is the actual time
on the CMS server, not the time on the user PC.
As of 11 September 2017: This problem is resolved in CMS PC Supervisor.

7. CMS R18.0.2.0
7.1 New Functionality in18.0.2.0
CMS R18.0.2.0 provides the following features:
• FIPS 140-2 Encryption support
o Customers can optionally administer the CMS Server’s Red Hat Linux OS to operate in
FIPS mode
o FIPS compliant ciphers will be used for the PC Supervisor client interface and the
Supervisor Web client interface, whether RHEL is operating in FIPS mode or not.

May 23, 2018 10

CMS R18.0.2.0 Release Notes

• Firewall protection using Linux IPTables

o Optionally, customers may configure firewall protection to open and close
individual ports on the CMS server.
o When firewall protection is configued, users are prompted to choose whether to
keep certain individual ports open or closed.
• Support for VMware 6.5
o VMware 5.5 and 6.0 continue to be supported

Enabling FIPS mode on CMS causes the CMS server to consume additional CPU and memory for the
server/client connections for CMS Supervisor PC and CMS Supervisor Web.
Thus, the capacities for CMS between the CMS Server and all client applications are reduced by 10%.
Please see the CMS Overview and Specifications document on support.avaya.com for specifics of
capacity impact.

Since CMS does not control the establishment of connections for optional 3rd party products, CMS
cannot provide FIPS 140-2 encryption on interfaces other than CMS Supervisor PC and CMS Supervisor
Web. For example, FIPS 140-2 encryption cannot be enforced on ODBC/JDBC connections.

If customers are concerned about security for 3rd party applications or ports that are open and cannot
support FIPS 140-2 standards of encryption, the firewall option can be used to close these ports.
For example, the ports used by ODBC/JDBC can be close using the firewall optional feature on the CMS
server.

7.2 Bugs Fixed in 18.0.2.0

The following CMS Server fixes have been added to CMS R18.0.2.0:
• Resolved an issue, in a designer integrated report, when an agent entered an AUX state with a
reason code, then later exits AUX; the reason code was incorrectly shown as 0.
• Resolved issue where illegal characters were written in the agent attribute field of the agent
trace table when agent trace was turned on for an agent not logged in.
• Fix problem where 'Services real time snapshot' showed the wrong tenant number if the
multitenancy package was installed while CMS server was running and operational.
• Resolved an issue related to certain SIP trunk refer/replace scenarios involving an ACD call being
mishandled by CMS causing the link to drop.
• Tomcat logs (created by use of the CMS Web Client) are now purged. Previously, the logs would
grow indefinitely.

The following CMS Supervisor Web fixes have been added to CMS R18.0.2.0 :
• CMS Web Client now accepts trunk group IDs beginning with the letter T
• Total line in a Web Client report was wrong when the query ID in the total line included a string
with blanks.
• CMS Web client now allows thresholds to be modified for Integrated Reports.
• Web client users can now be restricted to view only custom/designer reports and not standard
reports. With this change, the Web client and PC Supervisor client operate the same for report
access permissions.
• Designer reports with certain table joins would not run properly in the Web Client. This situation
has been resolved.
• The Web Client will display a chart for all chart types

May 23, 2018 11

CMS R18.0.2.0 Release Notes

• Web client now properly displays Designer reports in German where the Umlaut charater is
used in column headings.
• Grid report in CMS Web client interface now correctly displays "Normal" for 'skill state' column.

The following CMS Supervisor PC fixes have been added to CMS R18.0.2.0:
• For PC Supervisor client only, reports are now displayed correctly when more than 48 query
items are selected. The Web Client functions properly and did not exhibit this problem.
• In some cases, trunk group names were not displayed on reports. Trunk group names are now
correctly displayed for reports that contain data. When the trunk group report has no data, no
trunk group name is displayed.
• Integrated Skill Comparison report showed slightly different data between R17 and R18 CMS
versions. Data was correct in the database, and a display problem was resolved in Supervisor.
• A restarted report now gives correct data values when restarted with a new date and time that
are different from the original report run.
• A normal Supervisor user is now restricted from editing and saving a Designer Report owned by
an Administrator.
• When using the German Language and creating a Designer report with 2 different chart types
adjacent, all chart formats are now correctly retained after the report is saved and reopened
• When creating a Designer report that includes "Avg ACD Time", the data now correctly displays
as a time duration (example: 1 hour, 23 minutes, instead of 83 minutes).
• CMS PC Supervisor now functions correctly with Windows 10 Feature Pack 1709 installed.

8. Software Download Instructions

For installation and upgrade implementation options, please consult your Account team or
Sales team.

NOTE:
Please be sure to use the latest “Software Implementation, Maintenance and Troubleshooting”
document for proper instructions.

For upgrade, customers should consult the “CMS Overview and Specifications” document to
determine the proper upgrade procedure to use.
Go to http://support.avaya.com to view the full documentation set for CMS R18.

May 23, 2018 12

CMS R18.0.2.0 Release Notes

Appendix A: Patch Installation Instructions

No patches are required with CMS R18.0.2.0

May 23, 2018 13

CMS R18.0.2.0 Release Notes

Appendix B: Linux RPMs included in CMS R18.0.2.0

abrt-2.0.8-43.el6.x86_64 jasper-libs-1.900.1- pam-1.1.1-24.el6.x86_64

21.el6_9.x86_64
abrt-addon-ccpp-2.0.8- java-1.8.0-openjdk-1.8.0.161- pam_passwdqc-1.0.5-8.el6.x86_64
43.el6.x86_64 3.b14.el6_9.x86_64
abrt-addon-kerneloops-2.0.8- java-1.8.0-openjdk-headless- parted-2.1-29.el6.x86_64
43.el6.x86_64 1.8.0.161-3.b14.el6_9.x86_64
abrt-addon-python-2.0.8- jpackage-utils-1.7.5- passwd-0.77-7.el6.x86_64
43.el6.x86_64 3.16.el6.noarch
abrt-cli-2.0.8-43.el6.x86_64 json-c-0.11-13.el6.x86_64 pciutils-3.1.10-4.el6.x86_64
abrt-libs-2.0.8- kbd-1.15-11.el6.x86_64 pciutils-libs-3.1.10-4.el6.x86_64
43.el6.x86_64
abrt-python-2.0.8- kbd-misc-1.15-11.el6.noarch pcmciautils-015-4.2.el6.x86_64
43.el6.x86_64
abrt-tui-2.0.8-43.el6.x86_64 kernel-2.6.32- pcre-7.8-7.el6.x86_64
696.18.7.el6.x86_64
acl-2.2.49-7.el6_9.1.x86_64 kernel-firmware-2.6.32- perl-5.10.1-144.el6.x86_64
696.18.7.el6.noarch
acpid-1.0.10-3.el6.x86_64 kexec-tools-2.0.0- perl-libs-5.10.1-144.el6.x86_64
307.el6_9.1.x86_64
aic94xx-firmware-30- keyutils-1.4-5.el6.x86_64 perl-Module-Pluggable-3.90-
2.el6.noarch 144.el6.x86_64
alsa-lib-1.1.0-4.el6.x86_64 keyutils-libs-1.4-5.el6.i686 perl-Pod-Escapes-1.04-
144.el6.x86_64
alsa-utils-1.1.0- keyutils-libs-1.4-5.el6.x86_64 perl-Pod-Simple-3.13-
10.el6.x86_64 144.el6.x86_64
at-3.1.10-49.el6.x86_64 keyutils-libs-devel-1.4- perl-version-0.77-144.el6.x86_64
5.el6.x86_64
atmel-firmware-1.3- kpartx-0.4.9-100.el6_9.1.x86_64 pinentry-0.7.6-8.el6.x86_64
7.el6.noarch
attr-2.4.44-7.el6.x86_64 krb5-devel-1.10.3-65.el6.x86_64 pinfo-0.6.9-12.el6.x86_64
audit-2.4.5-6.el6.x86_64 krb5-libs-1.10.3-65.el6.i686 pkgconfig-0.23-9.1.el6.x86_64
audit-libs-2.4.5- krb5-libs-1.10.3-65.el6.x86_64 plymouth-0.8.3-29.el6.x86_64
6.el6.x86_64
augeas-libs-1.0.0- ksh-20120801-36.el6_9.x86_64 plymouth-core-libs-0.8.3-
10.el6.x86_64 29.el6.x86_64
authconfig-6.1.12- lcms-libs-1.19-1.el6.x86_64 plymouth-scripts-0.8.3-
23.el6.x86_64 29.el6.x86_64
avahi-libs-0.6.25- ledmon-0.79-1.el6.x86_64 pm-utils-1.2.5-11.el6.x86_64
17.el6.x86_64
b43-fwcutter-012- less-436-13.el6.x86_64 policycoreutils-2.0.83-
2.2.el6.x86_64 30.1.el6_8.x86_64
b43-openfwwf-5.2- libacl-2.2.49-7.el6_9.1.x86_64 polkit-0.96-11.el6.x86_64
10.el6.noarch
basesystem-10.0-4.el6.noarch libaio-0.3.107-10.el6.x86_64 poppler-0.12.4-12.el6_9.x86_64
bash-4.1.2-48.el6.x86_64 libattr-2.4.44-7.el6.x86_64 poppler-data-0.4.0-1.el6.noarch
bc-1.06.95-1.el6.x86_64 libblkid-2.17.2- poppler-utils-0.12.4-
12.28.el6_9.1.x86_64 12.el6_9.x86_64
bfa-firmware-3.2.23.0- libcap-2.16-5.5.el6.x86_64 popt-1.13-7.el6.x86_64
2.el6.noarch
bind-libs-9.8.2- libcap-ng-0.6.4- portreserve-0.0.4-11.el6.x86_64
0.62.rc1.el6_9.4.x86_64 3.el6_0.1.x86_64
bind-utils-9.8.2- libcom_err-1.41.12-23.el6.i686 postfix-2.6.6-8.el6.x86_64
0.62.rc1.el6_9.4.x86_64
binutils-2.20.51.0.2- libcom_err-1.41.12- prelink-0.4.6-3.1.el6_4.x86_64
5.47.el6_9.1.x86_64 23.el6.x86_64
biosdevname-0.7.2- libcom_err-devel-1.41.12- procmail-3.22-25.1.el6_5.1.x86_64
1.el6.x86_64 23.el6.x86_64
blktrace-1.0.1-7.el6.x86_64 libcurl-7.19.7-53.el6_9.x86_64 procps-3.2.8-45.el6_9.1.x86_64
bridge-utils-1.2- libdrm-2.4.65-2.el6.x86_64 psacct-6.3.2-70.el6.x86_64
10.el6.x86_64
btparser-0.17-2.el6.x86_64 libedit-2.11- psmisc-22.6-24.el6.x86_64

May 23, 2018 14

CMS R18.0.2.0 Release Notes

4.20080712cvs.1.el6.x86_64
busybox-1.15.1- libertas-usb8388-firmware- pth-2.0.7-9.3.el6.x86_64
21.el6_6.x86_64 5.110.22.p23-3.1.el6.noarch
bzip2-1.0.5-7.el6_0.x86_64 libevent-1.4.13-4.el6.x86_64 pygobject2-2.20.0-5.el6.x86_64
bzip2-libs-1.0.5- libffi-3.0.5-3.2.el6.x86_64 pygpgme-0.1-
7.el6_0.x86_64 18.20090824bzr68.el6.x86_64
ca-certificates-2017.2.14- libfontenc-1.1.2-3.el6.x86_64 pyOpenSSL-0.13.1-2.el6.x86_64
65.0.1.el6_9.noarch
checkpolicy-2.0.22- libgcc-4.4.7-18.el6.i686 python-2.6.6-66.el6_8.x86_64
1.el6.x86_64
chkconfig-1.3.49.5- libgcc-4.4.7-18.el6.x86_64 python-argparse-1.2.1-
1.el6.x86_64 2.1.el6.noarch
cms-R18.0.2.0-ma.k.x86_64 libgcrypt-1.4.5-12.el6_8.x86_64 python-dateutil-1.4.1-
7.el6.noarch
cmsweb-R18.0.2.0-ma.k.x86_64 libgpg-error-1.7-4.el6.x86_64 python-dmidecode-3.10.15-
1.el6.x86_64
ConsoleKit-0.4.1- libgssglue-0.1-11.el6.x86_64 python-ethtool-0.6-6.el6.x86_64
6.el6.x86_64
ConsoleKit-libs-0.4.1- libgudev1-147- python-gudev-147.1-
6.el6.x86_64 2.73.el6_8.2.x86_64 4.el6_0.1.x86_64
coreutils-8.4-46.el6.x86_64 libICE-1.0.6-1.el6.x86_64 python-iniparse-0.3.1-
2.1.el6.noarch
coreutils-libs-8.4- libidn-1.18-2.el6.x86_64 python-iwlib-0.1-1.2.el6.x86_64
46.el6.x86_64
cpio-2.10-13.el6.x86_64 libjpeg-turbo-1.2.1- python-libs-2.6.6-66.el6_8.x86_64
3.el6_5.x86_64
cpuspeed-1.5-22.el6.x86_64 libkadm5-1.10.3-65.el6.x86_64 python-lxml-2.2.3-1.1.el6.x86_64
cracklib-2.8.16-4.el6.x86_64 libnih-1.0.1-7.el6.x86_64 python-magic-5.04-30.el6.x86_64
cracklib-dicts-2.8.16- libnl-1.1.4-2.el6.x86_64 python-pycurl-7.19.0-9.el6.x86_64
4.el6.x86_64
crda-3.13_2015.10.22- libpcap-1.4.0- python-rhsm-1.18.7-1.el6_9.x86_64
3.el6.x86_64 4.20130826git2dbcaa1.el6.x86_64
cronie-1.4.4- libpciaccess-0.13.4- python-rhsm-certificates-1.18.7-
16.el6_8.2.x86_64 1.el6.x86_64 1.el6_9.x86_64
cronie-anacron-1.4.4- libpng-1.2.49-2.el6_7.x86_64 python-six-1.9.0-2.el6.noarch
16.el6_8.2.x86_64
crontabs-1.10-33.el6.noarch libproxy-0.3.0-10.el6.x86_64 python-urlgrabber-3.9.1-
11.el6.noarch
cryptsetup-luks-1.2.0- libproxy-bin-0.3.0- ql2100-firmware-1.19.38-
11.el6.x86_64 10.el6.x86_64 3.1.el6.noarch
cryptsetup-luks-libs-1.2.0- libproxy-python-0.3.0- ql2200-firmware-2.02.08-
11.el6.x86_64 10.el6.x86_64 3.1.el6.noarch
cups-1.4.2-78.el6_9.x86_64 libreport-2.0.9-33.el6.x86_64 ql23xx-firmware-3.03.27-
3.1.el6.noarch
cups-libs-1.4.2- libreport-cli-2.0.9- ql2400-firmware-7.03.00-
78.el6_9.x86_64 33.el6.x86_64 1.el6_5.noarch
curl-7.19.7-53.el6_9.x86_64 libreport-compat-2.0.9- ql2500-firmware-7.03.00-
33.el6.x86_64 1.el6_5.noarch
cyrus-sasl-2.1.23- libreport-filesystem-2.0.9- quota-3.17-23.el6.x86_64
15.el6_6.2.x86_64 33.el6.x86_64
cyrus-sasl-lib-2.1.23- libreport-plugin-kerneloops- rdate-1.4-16.el6.x86_64
15.el6_6.2.x86_64 2.0.9-33.el6.x86_64
cyrus-sasl-plain-2.1.23- libreport-plugin-logger-2.0.9- readahead-1.5.6-2.el6.x86_64
15.el6_6.2.x86_64 33.el6.x86_64
dash-0.5.5.1-4.el6.x86_64 libreport-plugin-mailx-2.0.9- readline-6.0-4.el6.x86_64
33.el6.x86_64
db4-4.7.25-22.el6.x86_64 libreport-plugin- Red_Hat_Enterprise_Linux-
reportuploader-2.0.9- Release_Notes-6-en-US-8-
33.el6.x86_64 2.el6.noarch
db4-utils-4.7.25- libreport-plugin-rhtsupport- redhat-indexhtml-6-6.el6.noarch
22.el6.x86_64 2.0.9-33.el6.x86_64
dbus-1.2.24-8.el6_6.x86_64 libreport-plugin-ureport-2.0.9- redhat-logos-60.0.14-1.el6.noarch
33.el6.x86_64
dbus-glib-0.86- libreport-python-2.0.9- redhat-release-server-6Server-
6.el6_4.x86_64 33.el6.x86_64 6.9.0.4.el6.x86_64
dbus-libs-1.2.24- libselinux-2.0.94-7.el6.i686 redhat-support-lib-python-0.9.7-
8.el6_6.x86_64 6.el6.noarch
dbus-python-0.83.0- libselinux-2.0.94-7.el6.x86_64 redhat-support-tool-0.9.8-
6.1.el6.x86_64 6.el6.noarch
desktop-file-utils-0.15- libselinux-devel-2.0.94- rfkill-0.3-4.el6.x86_64

May 23, 2018 15

CMS R18.0.2.0 Release Notes

9.el6.x86_64 7.el6.x86_64
device-mapper-1.02.117- libselinux-utils-2.0.94- rhn-check-1.0.0.1-43.el6.noarch
12.el6_9.1.x86_64 7.el6.x86_64
device-mapper-event- libsemanage-2.0.43- rhn-client-tools-1.0.0.1-
1.02.117-12.el6_9.1.x86_64 5.1.el6.x86_64 43.el6.noarch
device-mapper-event-libs- libsepol-2.0.41-4.el6.x86_64 rhnlib-2.5.22-15.el6.noarch
1.02.117-12.el6_9.1.x86_64
device-mapper-libs-1.02.117- libsepol-devel-2.0.41- rhnsd-4.9.3-5.el6.x86_64
12.el6_9.1.x86_64 4.el6.x86_64
device-mapper-persistent- libSM-1.2.1-2.el6.x86_64 rhn-setup-1.0.0.1-43.el6.noarch
data-0.6.2-
0.1.rc7.el6.x86_64
dhclient-4.1.1- libss-1.41.12-23.el6.x86_64 rng-tools-5-2.el6_7.x86_64
53.P1.el6_9.1.x86_64
dhcp-common-4.1.1- libssh2-1.4.2-2.el6_7.1.x86_64 rootfiles-8.1-6.1.el6.noarch
53.P1.el6_9.1.x86_64
diffutils-2.8.1- libstdc4.4.7-18.el6.i686 rpm-4.8.0-55.el6.x86_64
28.el6.x86_64
dmidecode-2.12-7.el6.x86_64 libstdc4.4.7-18.el6.x86_64 rpm-libs-4.8.0-55.el6.x86_64
dmraid-1.0.0.rc16- libstdcdevel-4.4.7-18.el6.i686 rpm-python-4.8.0-55.el6.x86_64
11.el6.x86_64
dmraid-events-1.0.0.rc16- libtar-1.2.11-17.el6_4.1.x86_64 rsh-0.17-64.el6_9.1.x86_64
11.el6.x86_64
dosfstools-3.0.9- libtasn1-2.3-6.el6_5.x86_64 rsync-3.0.6-12.el6.x86_64
4.el6.x86_64
dracut-004- libtiff-3.9.4-21.el6_8.x86_64 rsyslog-5.8.10-10.el6_6.x86_64
409.el6_8.2.noarch
dracut-fips-004- libtirpc-0.2.1-13.el6_9.x86_64 rt61pci-firmware-1.2-7.el6.noarch
409.el6_8.2.noarch
dracut-kernel-004- libudev-147-2.73.el6_8.2.x86_64 rt73usb-firmware-1.8-7.el6.noarch
409.el6_8.2.noarch
e2fsprogs-1.41.12- libusb-0.1.12-23.el6.x86_64 satyr-0.16-2.el6.x86_64
23.el6.x86_64
e2fsprogs-libs-1.41.12- libusb1-1.0.9- scl-utils-20120927-
23.el6.x86_64 0.7.rc1.el6.x86_64 29.el6_9.x86_64
ed-1.1-3.3.el6.x86_64 libuser-0.56.13-8.el6_7.x86_64 sed-4.2.1-10.el6.x86_64
efibootmgr-0.5.4- libutempter-1.1.5- selinux-policy-3.7.19-
15.el6.x86_64 4.1.el6.x86_64 307.el6_9.2.noarch
eggdbus-0.6-3.el6.x86_64 Lib_Utils-1.00-09.noarch selinux-policy-targeted-3.7.19-
307.el6_9.2.noarch
eject-2.1.5-17.el6.x86_64 libuuid-2.17.2- sendmail-8.14.4-9.el6_8.1.x86_64
12.28.el6_9.1.x86_64
elfutils-0.164-2.el6.x86_64 libX11-1.6.4-3.el6.x86_64 setserial-2.17-25.el6.x86_64
elfutils-libelf-0.164- libX11-common-1.6.4- setup-2.8.14-23.el6.noarch
2.el6.i686 3.el6.noarch
elfutils-libelf-0.164- libXau-1.0.6-4.el6.x86_64 setuptool-1.19.9-4.el6.x86_64
2.el6.x86_64
elfutils-libelf-devel-0.164- libxcb-1.12-4.el6.x86_64 sg3_utils-libs-1.28-12.el6.x86_64
2.el6.i686
elfutils-libs-0.164- libXext-1.3.3-1.el6.x86_64 sgpio-1.2.0.10-5.el6.x86_64
2.el6.x86_64
ethtool-3.5-6.el6.x86_64 libXfont-1.5.1-2.el6.x86_64 shadow-utils-4.1.5.1-5.el6.x86_64
expat-2.0.1-13.el6_8.x86_64 libXi-1.7.8-1.el6.x86_64 shared-mime-info-0.70-
6.el6.x86_64
expect-5.44.1.15- libxml2-2.7.6-21.el6_8.1.x86_64 slang-2.2.1-1.el6.x86_64
5.el6_4.x86_64
file-5.04-30.el6.x86_64 libxml2-python-2.7.6- smartmontools-5.43-3.el6.x86_64
21.el6_8.1.x86_64
file-libs-5.04-30.el6.x86_64 libXrender-0.9.10-1.el6.x86_64 snappy-1.1.0-1.el6.x86_64
filesystem-2.4.30- libxslt-1.1.26-2.el6_3.1.x86_64 sos-3.2-54.el6_9.1.noarch
3.el6.x86_64
findutils-4.4.2-9.el6.x86_64 libXtst-1.2.3-1.el6.x86_64 sqlite-3.6.20-1.el6_7.2.x86_64
fipscheck-1.2.0-7.el6.x86_64 lm_sensors-libs-3.1.1- strace-4.8-11.el6.x86_64
17.el6.x86_64
fipscheck-lib-1.2.0- logrotate-3.7.8-28.el6.x86_64 sudo-1.8.6p3-29.el6_9.x86_64
7.el6.x86_64
fontconfig-2.8.0- lsof-4.82-5.el6.x86_64 sysstat-9.0.4-33.el6.x86_64
5.el6.x86_64
freetype-2.3.11- lua-5.1.4-4.1.el6.x86_64 system-config-firewall-base-
17.el6.x86_64 1.2.27-7.2.el6_6.noarch

May 23, 2018 16

CMS R18.0.2.0 Release Notes

ftp-0.17-54.el6.x86_64 lvm2-2.02.143-12.el6_9.1.x86_64 system-config-firewall-tui-

1.2.27-7.2.el6_6.noarch
gamin-0.1.10-9.el6.x86_64 lvm2-libs-2.02.143- system-config-network-tui-
12.el6_9.1.x86_64 1.6.0.el6.3-4.el6.noarch
gawk-3.1.7-10.el6_7.3.x86_64 lzo-2.03-3.1.el6_5.1.x86_64 systemtap-runtime-2.9-
7.el6.x86_64
gdb-7.2-92.el6.x86_64 m2crypto-0.20.2-9.el6.x86_64 sysvinit-tools-2.87-
6.dsf.el6.x86_64
gdbm-1.8.0-39.el6.x86_64 m4-1.4.13-5.el6.x86_64 tar-1.23-15.el6_8.x86_64
giflib-4.1.6-3.1.el6.x86_64 mailx-12.4-8.el6_6.x86_64 tcl-8.5.7-6.el6.x86_64
glib2-2.28.8-9.el6.x86_64 make-3.81-23.el6.x86_64 tcpdump-4.0.0-
11.20090921gitdf3cb4.2.el6.x86_64
glibc-2.12- MAKEDEV-3.24-6.el6.x86_64 tcp_wrappers-7.6-58.el6.x86_64
1.209.el6_9.2.i686
glibc-2.12- man-1.6f-39.el6.x86_64 tcp_wrappers-libs-7.6-
1.209.el6_9.2.x86_64 58.el6.x86_64
glibc-common-2.12- man-pages-3.22-20.el6.noarch tcsh-6.17-38.el6.x86_64
1.209.el6_9.2.x86_64
gmp-4.3.1-12.el6.x86_64 man-pages-overrides-6.9.1- telnet-0.17-48.el6.x86_64
1.el6.noarch
gnupg2-2.0.14-8.el6.x86_64 mdadm-3.3.4-8.el6.x86_64 telnet-server-0.17-48.el6.x86_64
gnutls-2.12.23-21.el6.x86_64 MegaCli-8.04.07-1.noarch time-1.7-38.el6.x86_64
gpgme-1.1.8-3.el6.x86_64 microcode_ctl-1.17- tmpwatch-2.9.16-6.el6.x86_64
25.4.el6_9.x86_64
gpg-pubkey-2fa658e0-45700c69 mingetty-1.08-5.el6.x86_64 traceroute-2.0.14-2.el6.x86_64
gpg-pubkey-fd431d51-4ae0493b mlocate-0.22.2-6.el6.x86_64 ttmkfdir-3.0.9-32.1.el6.x86_64
gpm-libs-1.20.6- module-init-tools-3.9- tzdata-2017c-1.el6.noarch
12.el6.x86_64 26.el6.x86_64
grep-2.20-6.el6.x86_64 mtr-0.75-5.el6.x86_64 tzdata-java-2017c-1.el6.noarch
groff-1.18.1.4-21.el6.x86_64 mt-st-1.1-5.el6.x86_64 udev-147-2.73.el6_8.2.x86_64
grub-0.97-99.el6.x86_64 mysql-libs-5.1.73- unzip-6.0-5.el6.x86_64
8.el6_8.x86_64
grubby-7.0.15-7.el6.x86_64 nano-2.0.9-7.el6.x86_64 upstart-0.6.5-16.el6.x86_64
gskcrypt64-8.0-50.10.x86_64 ncurses-5.7- usbutils-003-6.el6.x86_64
4.20090207.el6.x86_64
gskssl64-8.0-50.10.x86_64 ncurses-base-5.7- usermode-1.102-3.el6.x86_64
4.20090207.el6.x86_64
gzip-1.3.12-24.el6.x86_64 ncurses-libs-5.7- ustr-1.0.4-9.1.el6.x86_64
4.20090207.el6.i686
hal-0.5.14-14.el6.x86_64 ncurses-libs-5.7- util-linux-ng-2.17.2-
4.20090207.el6.x86_64 12.28.el6_9.1.x86_64
hal-info-20090716- net-snmp-5.5-60.el6.x86_64 vconfig-1.9-8.1.el6.x86_64
5.el6.noarch
hal-libs-0.5.14- net-snmp-libs-5.5-60.el6.x86_64 vim-common-7.4.629-
14.el6.x86_64 5.el6_8.1.x86_64
hdparm-9.43-4.el6.x86_64 net-tools-1.60-114.el6.x86_64 vim-enhanced-7.4.629-
5.el6_8.1.x86_64
hesiod-3.1.0-19.el6.x86_64 newt-0.52.11-4.el6.x86_64 vim-filesystem-7.4.629-
5.el6_8.1.x86_64
hmaccalc-0.9.12-2.el6.x86_64 newt-python-0.52.11- vim-minimal-7.4.629-
4.el6.x86_64 5.el6_8.1.x86_64
hpssacli-2.0-23.0.x86_64 nfs-utils-1.2.3-75.el6_9.x86_64 virt-what-1.11-1.3.el6.x86_64
hunspell-1.2.8-16.el6.x86_64 nfs-utils-lib-1.1.5- wget-1.12-10.el6.x86_64
13.el6.x86_64
hunspell-en-0.20090216- nspr-4.13.1-1.el6.x86_64 which-2.19-6.el6.x86_64
7.1.el6.noarch
hwdata-0.233-18.1.el6.noarch nss-3.28.4-4.el6_9.x86_64 wireless-tools-29-6.el6.x86_64
info-4.13a-8.el6.x86_64 nss-softokn-3.14.3- words-3.0-17.el6.noarch
23.3.el6_8.x86_64
initscripts-9.03.58- nss-softokn-freebl-3.14.3- xdg-utils-1.0.2-
1.el6_9.2.x86_64 23.3.el6_8.i686 17.20091016cvs.el6.noarch
iproute-2.6.32-54.el6.x86_64 nss-softokn-freebl-3.14.3- xinetd-2.3.14-40.el6.x86_64
23.3.el6_8.x86_64
iptables-1.4.7-16.el6.x86_64 nss-softokn-freebl-devel- xmlrpc-c-1.16.24-
3.14.3-23.3.el6_8.i686 1210.1840.el6.x86_64
iptables-ipv6-1.4.7- nss-sysinit-3.28.4- xmlrpc-c-client-1.16.24-
16.el6.x86_64 4.el6_9.x86_64 1210.1840.el6.x86_64
iputils-20071127- nss-tools-3.28.4-4.el6_9.x86_64 xorg-x11-drv-ati-firmware-7.6.1-
24.el6.x86_64 3.el6_9.noarch
ipw2100-firmware-1.3- nss-util-3.28.4-1.el6_9.x86_64 xorg-x11-fonts-Type1-7.2-

May 23, 2018 17

CMS R18.0.2.0 Release Notes

11.el6.noarch 11.el6.noarch
ipw2200-firmware-3.1- ntp-4.2.6p5-12.el6_9.1.x86_64 xorg-x11-font-utils-7.2-
4.el6.noarch 11.el6.x86_64
irqbalance-1.0.7- ntpdate-4.2.6p5- xz-4.999.9-
8.el6.x86_64 12.el6_9.1.x86_64 0.5.beta.20091007git.el6.x86_64
ivtv-firmware-20080701- ntsysv-1.3.49.5-1.el6.x86_64 xz-libs-4.999.9-
20.2.noarch 0.5.beta.20091007git.el6.x86_64
iw-4.1-1.el6.x86_64 numactl-2.0.9-2.el6.x86_64 xz-lzma-compat-4.999.9-
0.5.beta.20091007git.el6.x86_64
iwl1000-firmware-39.31.5.1- openjpeg-libs-1.3- yum-3.2.29-81.el6.noarch
1.el6.noarch 16.el6_8.x86_64
iwl100-firmware-39.31.5.1- openldap-2.4.40-16.el6.x86_64 yum-metadata-parser-1.1.2-
1.el6.noarch 16.el6.x86_64
iwl3945-firmware-15.32.2.9- openssh-5.3p1-123.el6_9.x86_64 yum-plugin-security-1.1.30-
4.el6.noarch 40.el6.noarch
iwl4965-firmware- openssh-clients-5.3p1- yum-rhn-plugin-0.9.1-
228.61.2.24-2.1.el6.noarch 123.el6_9.x86_64 60.2.el6_8.noarch
iwl5000-firmware-8.83.5.1_1- openssh-server-5.3p1- yum-utils-1.1.30-40.el6.noarch
1.el6_1.1.noarch 123.el6_9.x86_64
iwl5150-firmware-8.24.2.2- openssl-1.0.1e-57.el6.i686 zd1211-firmware-1.4-4.el6.noarch
1.el6.noarch
iwl6000-firmware-9.221.4.1- openssl-1.0.1e-57.el6.x86_64 zip-3.0-1.el6_7.1.x86_64
1.el6.noarch
iwl6000g2a-firmware- openssl-devel-1.0.1e-57.el6.i68 zlib-1.2.3-29.el6.i686
17.168.5.3-1.el6.noarch
iwl6050-firmware-41.28.5.1- p11-kit-0.18.5-2.el6_5.2.x86_64 zlib-1.2.3-29.el6.x86_64
2.el6.noarch
p11-kit-trust-0.18.5-
2.el6_5.2.x86_64

May 23, 2018 18