Shield

Pipes
* *

Seamless & Welded Steel Pipe

to ASTM A53, Grade A & B (Sizes, Dimensions & Weights)

Nominal
Pipe Size O.D. Schedule 10 Schedule 20 Schedule 30 Standard Schedule 40 Schedule 60 Schedule 80

Inch mm Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. Wall Wt. WWall Wt.
⅜ 17.1 - - - - - - 2.31 0.84 2.31 0.84 - - 3.20 1.10
½ 21.3 - - - - - - 2.77 1.27 2.77 1.27 - - 3.73 1.62
¾ 26.7 - - - - - - 2.87 1.69 2.87 1.69 - - 3.91 2.21
1 33.4 - - - - - - 3.38 2.50 3.38 2.50 - - 4.55 3.25
1¼ 42.2 - - - - - - 3.56 3.39 3.56 3.39 - - 4.85 4.47
1½ 48.3 - - - - - - 3.68 4.05 3.68 4.05 - - 5.08 5.39
2 60.3 - - - - - - 3.91 5.44 3.91 5.44 - - 5.54 7.48
2½ 73.0 - - - - - - 5.16 8.63 5.16 8.63 - - 7.01 11.41
3 88.9 - - - - - - 5.49 11.29 5.49 11.29 - - 7.62 15.27
3½ 101.6 - - - - - - 5.74 13.57 5.74 13.57 - - 8.08 18.63
4 114.3 - - - - - - 6.02 16.07 6.02 16.07 - - 8.56 22.32
5 141.3 - - - - - - 6.55 21.77 6.55 21.77 - - 9.52 30.94
6 168.3 - - - - - - 7.11 28.26 7.11 28.26 - - 10.97 42.56
8 219.1 - - 6.35 33.31 7.04 36.31 8.18 42.55 8.18 42.55 10.31 53.08 12.70 64.64
10 273.0 - - 6.35 41.75 7.80 51.01 9.27 60.29 9.27 60.29 12.70 81.52 15.09 95.97
12 323.8 - - 6.35 49.71 8.38 65.18 9.52 73.78 10.31 79.70 14.27 108.92 17.48 132.04
14 355.6 6.35 54.69 7.92 67.90 9.52 81.25 9.52 81.25 11.13 94.55 15.09 126.71 19.05 158.10
16 406.4 6.35 62.64 7.92 77.83 9.52 93.17 9.52 93.17 12.70 123.30 16.66 160.12 21.44 203.53
18 457.2 6.35 70.60 7.92 87.75 11.13 122.43 9.52 105.10 14.27 155.87 19.05 205.83 23.83 254.67
20 508.0 6.35 78.55 9.52 117.02 12.70 155.12 9.52 117.02 15.09 183.42 20.62 247.83 26.19 311.17
24 610.0 6.35 94.46 9.52 140.88 14.27 209.50 9.52 140.88 17.48 255.24 24.61 355.02 30.96 441.78
26 660.0 7.92 127.43 12.70 202.85 - - 9.53 152.80 - - - - - -

Tensile Requirements
Wall = Wall thickness in mm
Grade A Grade B Wt. = Weight in Kg/m.
Available in black & hot dipped galvanized
Tensile Strength, Min, Psi [MPa] 48,000 [330] 60,000 [415]
* UL & FM details are available in their respective certificates.
Yield Strength, Min, Psi [MPa] 30,000 [205] 35,000 [240]
NOTE: Hydrostatic pressure test applied as per ASTM Standards.
* SHIELD reserves the right to change the contents without notice. 5
 VIZY.EX15278 - Metallic Sprinkler Pipe

Metallic Sprinkler Pipe

See General Information for Metallic Sprinkler Pipe

SHIELD FIRE SAFETY & SECURITY LTD EX15278

Unit 3, Endeavour Dr
Basildon, SS14 3WF UNITED KINGDOM
Schedule 10 (black and galvanized) steel pipe in the 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6 and 8 in sizes.

Schedule 40 (black and galvanized), Grade B, Type S steel pipe in the 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 and 12 in. sizes.

Schedule 80 (black and galvanized), Grade B, Type S steel pipe in the 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 and 12 in. sizes.

Schedule 40 (black and galvanized), Grade B, Type E steel pipe in the 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 and 12 in. sizes.

Schedule 40 (black or galvanized) steel pipe in the 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10, 12, 14 and 16 in. sizes

Weight Class STD (black or galvanized) steel pipe, 12 inch size

Schedule 30 (black or galvanized) steel pipe in the 14 and 16 in. sizes

Schedule 20 (black or galvanized) steel pipe in the 10 and 12 in. sizes

Schedule 10 (black or galvanized) steel pipe in the 2-1/2, 3, 4, 6, 8, 10, 14 and 16 in. sizes

Trademark and/or Tradename: , , ,

Last Updated on 2018-03-20

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL Solutions' Follow - Up
Service. Only those products bearing the UL Mark should be considered to be Certified and covered under UL Solutions' Follow - Up Service. Always look for the Mark on the
product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs,
Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement
"Reprinted from Product iQ with permission from UL Solutions" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice
in the following format: "©2023 UL LLC."
Shield
Threaded Fittings
Shield Threaded Fittings feature a complete range of ductile iron (D.I) / malleable iron (M.I.) threaded
fittings in a wide variety of configurations in sizes from ½” to 6”.

Shield fittings are UL, ULC listed and FM approved for water line and fire protection applications.

Material Ductile Iron ASTM A536, BS EN 1563

Malleable Iron BS EN 1562

Max. Working Pressure 500 Psi

Dimensions D. I. - American Standard ASME B16.3, B16.14, B16.39 - Class 150

M. I. - British Standard BS EN 10242, BS 143 & 1256

Threads American Standard ANSI B1.20.1

British Standard BS 21, ISO 7/1 (Taper)

Finish Black or hot dipped galvanized

7
Shield
Threaded Fittings
SDT-100 Elbow 90°
A Nominal Size A Nominal Size A
Inch Inch Inch Inch
½ 1.12 2½ 2.70
¾ 1.31 3 3.07
1 1.50 3½ 3.42
A 1¼ 1.75 4 3.79
1½ 1.95 5 4.50
2 2.25 6 5.13
UL/FM : ½" to 4"

SDT-101 Reducing Elbow 90°

Nominal Size A B

Inch Inch Inch

¾x½ 1.20 1.22
1x½ 1.26 1.36
B 1x¾ 1.37 1.45
1¼ x ½ 1.34 1.53
1¼ x ¾ 1.45 1.62
1¼ x 1 1.58 1.67
1½ x ½ 1.41 1.66
A 1½ x ¾ 1.52 1.75
1½ x 1 1.65 1.80
1½ x 1¼ 1.82 1.88
UL/FM : ¾" to 3" 2x¾ 1.60 1.97
2x1 1.73 2.02
2 x 1½ 2.02 2.16
2½ x 1½ 2.39 2.60
2½ x 2 2.16 2.51
3x2 2.83 3.00
3 x 2½ 2.52 2.89
4x3 3.30 3.60

A SDT-200 Elbow 45°

Nominal Size A Nominal Size A
Inch Inch Inch Inch
½ 0.88 2½ 1.95
¾ 0.98 3 2.17
A
1 1.12 3½ 2.39
1¼ 1.29 4 2.61
UL/FM : ½" to 2½" 1½ 1.43 5 3.05
2 1.68 6 3.46

8 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Threaded Fittings
SDT-12 Tee
Nominal Size A Nominal Size A
A
Inch Inch Inch Inch
½ 1.12 2½ 2.70
¾ 1.31 3 3.08
1 1.50 3½ 3.42
A A 1¼ 1.75 4 3.79
UL/FM: ½" to 4" 1½ 1.95 5 4.50
2 2.25 6 5.13

SDT-53 Reducing Tee

Nominal Size A B C
Inlet Run Branch
Inch Inch Inch Inch Inch Inch
½ ¾ ½ 1.20 1.20 1.22
1 1 1.50 1.36 1.50
½ 1.26 1.20 1.36
¾ ¾ 1.37 1.31 1.45
1
1 1.50 1.45 1.50
½ 1.26 1.26 1.36
1
¾ 1.37 1.37 1.45
½ 1.34 1.26 1.53
¾ 1.45 1.37 1.62
1
1 1.58 1.50 1.67
1¼ 1¼ 1.75 1.67 1.75
Branch ½ 1.34 1.34 1.53
1¼ ¾ 1.45 1.45 1.62
1 1.58 1.58 1.67
½ 1.44 1.31 1.69
C ¾ 1.50 1.37 1.75
1
1 1.65 1.50 1.80
Inlet Run 1½ 1.94 1.80 1.94
½ 1.41 1.34 1.66
1½ 1¼ ¾ 1.52 1.45 1.75
1 1.65 1.58 1.80
A B ½ 1.41 1.41 1.66
UL/FM: ¾” to 2½” ¾ 1.52 1.52 1.75
½
1 1.65 1.65 1.80
1¼ 1.82 1.82 1.88
1 2 2.25 2.02 2.25
Branch 1¼ 2 2.25 2.10 2.25
½ 1.49 1.41 1.88
¾ 1.60 1.52 1.97
C 1½ 1 1.73 1.65 2.02
1½ 2.02 1.94 2.16
Inlet Run 1¼
2 2.25 2.16 2.25
½ 1.49 1.49 1.88
¾ 1.60 1.60 1.97
2 1 1.73 1.73 2.02
A B 1¼ 1.90 1.90 2.10
1½ 2.02 2.02 2.16
UL/FM: ¾” to 3” 2½ 2 ¾ 1.74 1.60 2.32

* Refer to UL/FM certificates for more information. 9

* SHIELD reserves the right to change the contents without notice.
Shield
Threaded Fittings
SDT-30 Reducing Coupling
A
Nominal Size A Nominal Size A
Inch Inch Inch Inch
¾x½ 1.52 1½ x 1¼ 2.17
1x½ 1.67 2x1 2.56
1x¾ 1.67 2 x 1¼ 2.91
1¼ x ¾ 1.93 2 x 1½ 3.15
1¼ x 1 1.93 2½ x 2 3.70
UL/FM: ½" to 1½" 1½ x 1 2.18
Note: Sizes available up to 6"

SDT-13 Cross
Nominal Size A B
B B Inch Inch Inch
½ 1.10 1.12
A 1 1.50 1.50
1¼ 1.75 1.75
1½ 1.95 1.95
2 2.25 2.25
A 2½ 2.70 2.70
3 3.08 3.08
UL/FM : 1" to 2" 3½ 3.42 3.42
4 3.79 3.79
5 4.50 4.50
6 5.13 5.13

A A SDT-51 Reducing Cross

Nominal Size A B
B
Inch Inch Inch
1¼ x 1¼ x 1 x 1 1.67 1.58
B 1½ x 1½ x 1 x 1 1.80 1.65
2x2x1x1 2.02 1.73
UL/FM : 1¼" to 2" 2½ x 2½ x 2 x 2 2.37 2.60
3x3x2x2 2.52 2.89

10 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Threaded Fittings
SDT-22 Straight Coupling
Nominal Size A Nominal Size A
A
Inch Inch Inch Inch
½ 1.34 2 2.53
¾ 1.52 2½ 2.68
1 1.67 3 3.18
1¼ 1.93 4 3.69
1½ 2.18

UL/FM : ½" to 2½"

SDT-55 Plug
Nominal Size A A

Inch Inch Inch

½ 0.56 0.38
¾ 0.63 0.44
B 1 0.75 0.50
1¼ 0.80 0.56
1½ 0.83 0.62
A
2 0.88 0.58
2½ 1.07 0.74
3 1.13 0.80
UL/FM : ½" to 2"
2½ 1.18 0.86

Note: Sizes available up to 6"

SDT-14 Cap
Nominal Size A Nominal Size A

Inch Inch Inch Inch

A ½ 0.87 2 1.45
¾ 0.97 2½ 1.70
1 1.16 3 1.80
UL/FM : ½" to 2½" 1¼ 1.28 4 2.08
1½ 1.33 6 2.55

* Refer to UL/FM certificates for more information. 11

* SHIELD reserves the right to change the contents without notice.
Shield
Threaded Fittings
SDT-57 Hex Bushing
Nominal Size A

Inch Inch
1x½ 1.06
A 1x¾ 1.06
1¼ x 1 1.18
1½ x 1 1.26
1½ x 1¼ 1.26
2x1 1.34
UL/FM: ¾" to 2"
2 x 1¼ 1.34
2 x 1½ 1.34

SDT-59 Union
Nominal Size A

Inch Inch

A ½ 1.72
¾ 1.94
1 2.06
1¼ 2.26
1½ 2.41
2 2.75
UL/FM: 1" to 2" 2½ 3.22
3 3.50
4 3.65

A
SDT-11 Hex Nipple
Nominal Size A B

Inch Inch Inch

½ 1.57 0.98
¾ 1.77 1.18
1 2.05 1.45
1¼ 2.20 1.81
B
1½ 2.28 2.05
2 2.56 2.52
2½ 2.83 3.15
3 3.15 3.70
4 3.62 4.65

SDT-111 Hex Reducing Nipple

Nominal Size A

Inch Inch
¼x⅛ 31.00
¼x¾ 54.00
1¼ x ½ 57.00
2x½ 68.00
A 2½ x 1 75.00
2½ x 1¼ 75.00
2½ x 1½ 75.00
2½ x 2 75.00
3 x 1½ 83.00
3x2 83.00
3 x 2½ 83.00

12 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Grooved Fittings
for Fire Fighting, HVAC, Oil & Gas Projects

NOTE: Refer to UL/FM certificates for more information.

13
Shield
Grooved Fittings

The Shield Grooved System provides an economical and efficient

piping system solution and offers significant benefits when
compared to conventional types of pipe connections including:
• Faster Installation
• Because there is no need for welding or heating, the Shield
System ensures a safer and reliable working environment
• Ensures easy alignment
• Reduces noise and vibration
• Easy to install and remove in case of any maintenance requirements

Feature a wide range of coupling and fittings for piping applications in Air Conditioning, Fire Fighting Systems and water pipe
lines etc...
Shield Grooved Systems offer 3 types of couplings:
High Pressure Couplings (Flexible) • Medium Pressure Couplings (Rigid & Flexible) • Light Pressure Couplings (Rigid & Flexible)

Material
Shield Grooved Coupling housing and other grooved fittings are cast from Ductile Iron to ASTM A536 Grade 65-45-12 in red
paint or Hot Dipped Galvanized, bolts are carbon steel to ISO 898-1 Class 8.8 heat treated/SAE J429, Grade5; Nuts to SAE J995,
Grade 2 with Electro Galvanized Finish. Hot Dipped Galvanized Nuts and Bolts can be also supplied upon request.
Gasket (C shaped)
Shield Grooved Coupling are available in various types of gasket.
Coupling with EPDM rubber gasket are widely used around the world and it conforms to ASTM D2000-1, Grade A.

It is important to use the gasket that suits your application, use the table below to select the optimum gasket.

Material Temperature Range Colour General Recommended Application

Hot water service, variety of diluted acid, oil free air, chemical.
EPDM -34° C ~ +110° C Green Strip
This is NOT recommended for Petroleum services.

Petroleum products, vegetable and mineral oils, air with oil vapours.
Nitrile -29° C ~ +82° C Orange Strip
This is NOT recommended for hot water +66°C or for hot dry air over +60°C.

Silicone -34° C ~ +177° C Red Gasket Dry heat and air without hydrocarbons up to +177°C and certain chemicals.

SHIELD Grooved Coupling EPDM Gaskets must be lubricated on the lips and outside back prior to assembly using silicon based non-petroleum
lubricant.
Shield Grooved Red Paint fittings are recommended to use for indoor applications, in normal condition galvanized grooved fittings can be used
for outdoor application, however, considering the atmosphere further coating protection may need to apply according to the project requirement.
For more details about lubricant for other types of gasket, please contact us.

14 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Rigid
Coupling
SDG-22 Standard
Nominal Maximum Bolt/Nut
Pipe O.D. Dimensions
Size Working Pressure No. - Size
X Y Z
Inch mm Psi mm mm mm mm
1 33.7 500 59.0 100.0 44.0 2-⅜ x 55
1¼ 42.4 500 66.0 109.5 45.0 2-⅜ x 55
1½ 48.3 500 72.0 115.0 45.0 2-⅜ x 55
2 60.3 500 85.0 131.0 45.0 2-⅜ x 55
2½ 73.0 500 98.0 145.0 45.0 2-⅜ x 55
3 O.D. 76.1 500 101.0 147.0 45.0 2-⅜ x 55
3 88.9 500 115.0 170.0 46.0 2-½ x 70
4 O.D. 108.0 500 140.0 197.0 52.0 2-½ x 70
4 114.3 500 146.0 200.0 52.0 2-½ x 70
5 133.0 300 165.0 232.0 52.0 2-⅝ x 85
5½ O.D. 139.7 500 170.0 238.0 52.0 2-⅝ x 85
5 141.3 500 172.0 236.5 52.0 2-⅝ x 85
6 159.0 300 190.0 258.0 52.0 2-⅝ x 85
6½ O.D. 165.1 500 198.0 266.0 52.0 2-⅝ x 85
6 168.3 500 202.0 270.0 52.0 2-⅝ x 85
8 219.1 500 260.0 346.0 62.0 2-¾ x 115
10 267.4 300 318.0 396.0 63.0 2-¾ x 120
10 273.0 500 327.0 420.0 63.0 2-¾ x 125
12 318.5 300 364.0 456.0 63.0 2-⅞ x 140
12 323.9 500 378.0 466.0 63.0 2-⅞ x 140
14 355.6 300 415.0 510.0 72.0 3-⅞ x 140
16 406.4 300 468.0 575.0 72.0 3-⅞ x 140
18 457.2 225 508.0 608.0 78.0 3-⅞ x 140
20 508.0 225 563.0 660.0 78.0 4-⅞ x 140
24 609.6 225 668.0 772.0 78.0 4-1 x 140

* Refer to UL certificates for more information.

* SHIELD reserves the right to change the contents without notice.

Shield Rigid Coupling

provides rigid joints to prevent
liner movement of pipe
assembly. With a unique end
locked design, SDG-22
coupling can be used when
the application or design calls
for rigid installations.

* Refer to UL/FM certificates for more information. 15

* SHIELD reserves the right to change the contents without notice.
Shield
Rigid
Coupling
SDG-20 Light
Nominal Pipe O.D. Maximum Dimensions Bolt/Nut
Size Working Pressure No. - Size
X Y Z
Inch mm Psi mm mm mm mm
3 88.9 350 114.0 160.0 45.0 2-⅜ x 55
4 O.D. 108.0 300 135.0 185.0 50.0 2-½ x 70
4 114.3 350 140.0 192.0 46.5 2-½ x 70
5½ O.D. 139.7 350 168.0 225.0 50.0 2-½ x 75
5 141.3 350 170.0 225.0 50.0 2-½ x 75
6 O.D. 159.0 300 190.0 252.0 50.0 2-⅝ x 80
6½ O.D. 165.1 350 195.0 250.0 50.0 2-½ x 75
6 168.3 350 200.0 255.0 50.0 2-½ x 75
8 O.D. 216.3 300 255.0 320.0 58.0 2-⅝ x 85
8 219.1 350 255.0 324.0 58.0 2-⅝ x 85
10 273.0 300 318.0 410.0 63.0 2-¾ x 120

Shield
Flexible
Coupling
SDG-27 Heavy Duty
Nominal Maximum Bolt/Nut
Pipe O.D. Dimensions
Size Working Pressure No. - Size
X Y Z
Inch mm Psi mm mm mm mm
Shield SDG-27 is a 2 60.3 750 90.0 134 45.0 2-½ x 75
high pressure 2½ 73.0 750 100.0 150 45.0 2-½ x 75
flexible coupling 3 O.D. 76.1 750 102.0 154.0 45.0 2-½ x 75
can be used in 3 88.9 750 121.0 172.0 45.0 2-½ x 75
different 4 114.3 750 151.0 214.0 50.0 2-⅝ x 85
applications where
5 141.3 750 180.0 248.0 51.0 2-¾ x 115
high pressure
6½ O.D. 165.1 750 205.0 278.0 51.0 2-¾ x 115
service is required.
6 168.3 750 208.0 284.0 51.0 2-¾ x 115
8 219.1 750 268.0 354.0 61.0 2-⅞ x 140
12 323.9 500 385.2 477.0 66.0 2-⅞ x 140

16 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Flexible
Coupling
SDG-25 Standard
Nominal Maximum Bolt/Nut
Pipe O.D. Dimensions
Size Working Pressure No. - Size
X Y Z
Inch mm Psi mm mm mm mm
1 33.7 500 55.0 92.0 42.0 2-⅜ x 55
1¼ 42.4 500 65.0 104.0 44.0 2-⅜ x 55
Shield Flexible 1½ 48.3 500 70.0 110.0 44.0 2-⅜ x 55
Couplings allow 2 60.3 500 83.0 125.0 44.0 2-⅜ x 55
controlled angular
2½ 73.0 500 96.0 143.0 45.0 2-⅜ x 55
movement of the pipe
3 O.D 76.1 500 100.0 145.0 45.0 2-⅜ x 55
to assist alignment
3 88.9 500 115.0 160.0 45.0 2-½ x 70
and installation. The
4 O.D. 108.0 500 138.0 190.0 50.0 2-½ x 70
advantage of flexibility
4 114.3 500 145.0 198.0 50.0 2-½ x 70
must be considered
5 O.D. 133.0 300 162.0 225.0 51.0 2-⅝ x 80
in the design or
5½ O.D 139.7 500 169.0 230.0 52.0 2-⅝ x 80
hanger and support
5 141.3 500 170.0 232.0 51.0 2-⅝ x 80
spacing.
6 O.D. 159.0 300 190.0 256.0 52.0 2-⅝ x 85
6½ O.D 165.1 500 196.0 260.0 52.0 2-⅝ x 85
6 168.3 500 200.0 265.0 52.0 2-⅝ x 85
8 216.3 300 254.0 320.0 59.0 2-⅝ x 85
8 219.1 500 258.0 342.0 60.0 2-¾ x 115
10 267.4 300 308.5 403.0 64.0 2-¾ x 115
10 273.0 500 337.0 406.0 65.0 2-⅞ x 140
12 318.5 300 363.0 460.0 63.0 2-⅞ x 140
12 323.9 500 378.0 465.0 65.0 2-⅞ x 140
14 355.6 300 402.0 493.0 72.0 3-⅞ x 140
14 377.0 225 428.0 520.0 72.0 3-⅞ x 140
16 406.4 300 458.0 547.0 72.0 3-⅞ x 140
16 426.0 225 476.0 566.0 73.0 3-⅞ x 140
18 457.2 300 505.0 598.0 78.0 3-⅞ x 140
20 508.0 300 550.0 648.0 78.0 4-⅞ x 140
24 609.6 300 662.0 774.0 78.0 4-1 x 140

* Refer to UL/FM certificates for more information. 17

* SHIELD reserves the right to change the contents without notice.
Shield Light
Flexible
Coupling

SDG-21
SDG-21 is
designed for a Nominal Maximum Bolt/Nut
Pipe O.D. Dimensions
Size Working Pressure No. - Size
maximum working
pressure of 300psi. X Y Z
Inch mm Psi mm mm mm mm
The flexibility
3 88.9 300 112.2 159.0 45.5 2-⅜ x 55
benefits of this
4 114.3 300 139.0 182.0 50.0 2-⅜ x 55
coupling can be
5½ O.D. 139.7 300 168.0 228.0 51.0 2-⅝ x 80
used in
6½ O.D. 165.1 300 192.0 244.0 51.0 2-½ x 75
applications where
6 168.3 300 200.0 266.0 52.0 2-⅝ x 85
high pressure is
not required. 10 273.0 300 320.0 398.0 64.0 2-¾ x 120

18 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Reducing
Coupling
SDG-30
Nominal Maximum Bolt/Nut
Pipe O.D. Dimensions
Size Working Pressure No. - Size
X Y Z
Inch mm Psi mm mm mm mm
2 x 1½ 60.3 x 48.3 360 86.0 125.0 44.0 2-⅜ x 55
2½ x 1 73.0 x 33.7 300 100.0 138.0 45.0 2-⅜ x 55
Shield’s SDG-30
2½ x 2 73.0 x 60.3 360 100.0 138.0 45.0 2-⅜ x 55
Reducing Coupling
3 O.D. x 1 76.1 x 33.7 300 102.0 140.0 45.0 2-⅜ x 55
allows in line
reduction of the 3 O.D. x 1½ 76.1 x 48.3 300 102.0 140.0 45.0 2-⅜ x 55
pipe diameter 3 O.D. x 2 76.1 x 60.3 300 102.0 144.0 45.0 2-⅜ x 55
on a piping run. 3 O.D. x 2½ 76.1 x 73.0 300 102.5 145.0 45.0 2-⅜ x 55
SDG-30 can also
3x1 88.9 x 33.7 300 115.0 168.0 46.0 2-½ x 70
replace the need
3x2 88.9 x 60.3 360 115.0 168.0 46.0 2-½ x 70
for two couplings
as well as reducing 3 x 2½ 88.9 x 73.0 360 115.0 168.0 46.0 2-½ x 70
fittings. 3 x 3 O.D. 88.9 x 76.1 300 115.0 172.0 46.0 2-½ x 70
4x1 114.3 x 33.7 300 144.0 198.0 50.0 2-½ x 70
4x2 114.3 x 60.3 360 144.0 198.0 50.0 2-½ x 70
4 x 2½ 114.3 x 73.0 360 144.0 198.0 50.0 2-½ x 70
4 x 3 O.D. 114.3 x 76.1 360 144.0 202.0 50.0 2-½ x 70
4x3 114.3 x 88.9 300 148.0 198.0 50.0 2-½ x 70
6½ O.D. x 3 165.1 x 88.9 300 200.0 260.0 51.0 2-¾ x 115
6½ O.D. x 4 165.1 x 114.3 360 197.0 260.0 51.0 2-⅝ x 85
6x3 168.3 x 88.9 300 200.0 268.0 51.0 2-⅝ x 85
6x4 168.3 x 114.3 360 202.5 268.0 52.5 2-⅝ x 85
6 x 6½ O.D. 168.3 x 165.1 300 204.0 268.0 52.5 2-⅝ x 85
8 x 6½ O.D. 219.1 x 165.1 300 257.0 335.0 60.0 2-¾ x 115
8x6 219.1 x 168.3 360 260.0 338.0 60.0 2-¾ x 115

* Refer to UL/FM certificates for more information. 19

* SHIELD reserves the right to change the contents without notice.
Shield
90° & 45°
Elbows

90° SDG-100, 45° SDG-200, 90° SDG-105

SDG-100 SDG-200 SDG-105
Nominal
Pipe O.D.
Size 90° Elbow 45° Elbow 90° Elbow
Dimensions Dimensions Dimensions
Maximum Working C-E Maximum Working C-E Maximum Working C-E
Pressure Pressure Pressure

Inch mm PSI mm PSI mm PSI mm

1 33.7 500 57.0 500 44.5 - -
1¼ 42.4 500 70.0 500 44.5 - -
1½ 48.3 500 70.0 500 44.5 - -
2 60.3 500 82.5 500 51.0 300 70.0
2½ 73.0 500 95.0 500 57.0 300 76.0
3 O.D. 76.1 500 95.0 500 57.0 300 76.0
3 88.9 500 108.0 500 63.5 300 85.5
4 O.D. 108.0 - - 500 76.0 500 101.0
4 114.3 500 127.0 500 76.0 365 101.0
5 O.D. 133.0 500 122.0 500 82.5 - -
5½ O.D. 139.7 500 140.0 500 82.5 300 124.0
5 141.3 500 140.0 500 82.5 - -
6 O.D. 159.0 - - 500 89.0 - -
6½ O.D. 165.1 500 165.0 500 89.0 365 140.0
6 168.3 500 165.0 500 89.0 300 140.0
8 O.D. 216.3 - - 500 108.0 300 175.0
8 219.1 500 197.0 500 108.0 300 165.0
10 267.4 300 229.0 300 120.5 - -
10 273.0 500 229.0 300 120.5 - -
12 318.5 300 254.0 300 133.0 - -
12 323.9 500 254.0 300 133.0 - -
14 355.6 300 280.0 300 152.5 - -
14 377.0 300 279.0 300 122.0 - -
16 406.4 300 305.0 300 184.0 - -
16 426.0 300 305.0 - - - -
18 457.2 300 394.0 300 203.0 - -
18 480.0 300 335.0 - - - -
20 508.0 300 438.0 300 229.0 - -
24 609.6 300 508.0 300 280.0 - -

* Refer to UL/FM certificates for more information. 21

* SHIELD reserves the right to change the contents without notice.
Shield
22.5° & 11.25°
Elbows

22.5° SDG-225 & 11.25° SDG-112

Nominal Maximum Working 22.5° Elbow 11.25° Elbow
Pipe O.D.
Size Pressure Dimensions Dimensions
C-E C-E
Inch mm Psi mm mm

1¼ 42.4 500 45.0 35.0

1½ 48.3 500 45.0 35.0
2 60.3 500 48.0 35.0
2½ 73.0 500 51.0 38.0
3 O.D. 76.1 500 51.0 38.0
3 88.9 500 57.0 38.0
4 O.D. 108.0 500 73.0 44.0
4 114.3 500 73.0 44.0
5½ O.D. 139.7 500 73.0 51.0
6 O.D. 159.0 500 79.0 51.0
6½ O.D. 165.1 500 79.0 51.0
6 168.3 500 79.0 51.0
8 219.1 500 98.0 51.0

22 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Tees
C-E C-E C-E

C-E
C-E

C-E
SDG-12 Tee, SDG-13 Cross Tee, SDG-102 Tee
Maximum SDG-12 Tee SDG-13 Cross Tee SDG-102 Tee (Short)
Maximum Dimensions Dimensions Dimensions
Nominal Working
Pipe O.D. Working
Size Pressure
Pressure Maximum
(SDG 13) C-E C-E C-E
Working Pressure
Inch mm PSI PSI mm mm Psi mm
1 33.7 500 - 57.0 - - -
1¼ 42.4 500 - 70.0 70.0 - -
1½ 48.3 500 - 70.0 70.0 - -
2 60.3 500 - 82.5 70.0 300 70.0
2½ 73.0 500 - 95.0 76.0 300 76.0
3 O.D. 76.1 500 - 95.0 76.0 300 76.0
3 88.9 500 - 108.0 85.5 300 85.5
4 O.D. 108.0 500 500 - 101.0 300 101.0
4 114.3 500 - 127.0 101.0 300 101.0
5 O.D. 133.0 500 - 122.0 - - -
5½ O.D. 139.7 500 - 140.0 124.0 300 124.0
5 141.3 500 - 140.0 124.0 - -
6 O.D. 159.0 500 500 - 140.0 300 140.0
6½ O.D. 165.1 500 - 165.0 140.0 300 140.0
6 168.3 500 - 165.0 140.0 300 140.0
8 216.3 - - - - 300 175.0
8 219.1 500 - 197.0 175.0 300 175.0
10 267.4 500 - 229.0 - - -
10 273.0 500 - 229.0 229.0 - -
12 318.5 500 - 254.0 - - -
12 323.9 500 - 254.0 254.0 - -
14 355.6 300 - 280.0 279.0 - -
14 377.0 300 - 279.0 279.0 - -
16 406.4 300 - 305.0 305.0 - -
16 426.0 300 - 285.0 - - -
18 457.2 300 - 342.0 343.0 - -
18 480 300 - 335.0 - - -
20 508.0 300 - 381.0 381.0 - -
24 609.6 300 - 432.0 432.0 - -

Note:
• Reducing cross (grooved, threaded) are also available contact SHIELD for details.

* Refer to UL/FM certificates for more information. 23

* SHIELD reserves the right to change the contents without notice.
Shield
Cap SDG-14
Nominal Maximum Working
Pipe O.D. Cap Dimension
Size Pressure
E
Inch mm Psi/Mpa mm
1 33.7 500 22.1
1¼ 42.4 500 23.5
1½ 48.3 500 23.5
E
2 60.3 500 23.5
2½ 73.0 500 23.5
3 O.D. 76.1 500 24.5
3 88.9 500 24.0
4 108.0 500 27.0
4 114.3 500 27.0
5 133.0 500 25.5
5½ O.D. 139.7 500 25.5
5 141.3 500 25.5
6 159.0 500 27.0
6½ O.D. 165.1 500 27.0
6 168.3 500 24.5
6 216.3 500 30.0
8 219.1 500 30.0
10 273.0 500 32.0
12 323.9 500 32.0
14 355.6 300 165.0
16 406.4 300 178.0
18 457.2 300 203.0
20 508.0 300 229.0
24 609.6 300 267.0

SDG-14th Concentric Cap

Nominal Maximum Working
Pipe O.D. Cap Dimension
Size Pressure
E
Inch mm Psi /Mpa mm
2x1 60.3 x 33.7 500 23.5
3 O.D. x 1 76.1 x 33.7 500 24.5
3 O.D. x 1½ 76.1 x 48.3 500 23.5
3 O.D. x 2 76.1 x 60.3 500 24.0
3x½ 88.9 x 21.3 500 25.4
3x1 88.9 x 33.7 500 24.0
3 x 1½ 88.9 x 48.3 500 23.5
3x2 88.9 x 60.3 500 23.5
4x½ 114.3 x 21.3 500 27.0
4x1 114.3 x 33.7 500 27.0
4 x 1½ 114.3 x 48.3 500 25.4
4x2 114.3 x 60.3 500 25.4
5½ O.D. x 2 139.7 x 60.3 500 27.0
6½ O.D x ½ 165.1 x 21.3 500 27.0
6½ O.D x 1 165.1 x 33.7 500 27.0
6½ O.D. x 2 165.1 x 60.3 500 27.0
6 x 1½ 168.3 x 48.3 500 27.0
6x2 168.3 x 60.3 500 27.0
8x1 219.1 x 33.7 500 30.0

24 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
 W

Shield Grooved & Adaptor

L
Z

Flanges X

X
Y
E Y

Grooved Flange SDG-15

& Adaptor Flange SDG-16 SDG-15 SDG-16 Z

Nominal Size Pipe O.D. Max. Working Pressure Grooved Flange Dimensions Adaptor Flange Dimensions

W Z X Y E Bolt/Nut Size L X Y Z Bolt/Nut Size

Inch mm Psi mm mm mm mm mm mm mm mm mm mm mm
1 33.7 300 - - - - - - - 60.5 115.0 85.0 16.0 4-½
1¼ 42.4 300 - - - - - - - 60.5 140.0 100.0 16.0 4-⅝
1½ 48.3 300 195.0 18.5 150.0 110.0 45.4 2-⅜ x 50 4-⅝ 60.5 150.0 110.0 16.0 4-⅝
2 60.3 300 220.0 18.5 165.0 125.0 57.5 2-⅜ x 50 4-⅝ 65.0 165.0 125.0 16.0 4-⅝
3 O.D. 76.1 300 235.0 18.5 185.0 145.0 72.7 2-⅜ x 50 4-⅝ 65.0 185.0 145.0 16.0 4-⅝
3 88.9 300 255.0 18.5 195.0 160.0 85.5 2-⅜ x 50 8-⅝ 65.0 200.0 160.0 16.0 8-⅝
PN10/PN16

4 108.0 300 279.0 18.5 220.0 180.0 104.5 2-⅜ x 50 8-⅝ 70.0 220.0 180.0 16.0 8-⅝
4 114.3 300 279.0 18.5 224.0 180.0 110.5 2-⅜ x 50 8-⅝ 70.0 220.0 180.0 16.0 8-⅝
5 133.0 300 312.0 21.5 250.0 210.0 129.2 2-½ x 65 8-⅝ 70.0 250.0 210.0 18.0 8-⅝
5½ O.D. 139.7 300 320.0 23.0 250.0 210.0 135.5 2-½ x 65 8-⅝ 70.0 250.0 210.0 18.0 8-⅝
6 159.0 300 346.0 21.5 280.0 240.0 154.8 2-½ x 65 8-¾ 70.0 285.0 240.0 18.0 8-¾
6½ O.D. 165.1 300 346.0 21.5 280.0 240.0 160.8 2-½ x 65 8-¾ 70.0 285.0 240.0 18.0 8-¾
6 168.3 300 346.0 24.0 280.0 240.0 164.3 2-½ x 65 8-¾ 70.0 285.0 240.0 18.0 8-¾
8 219.1 300 414.3 30.0 340.0 295.0 214.9 2-⅜ x 70 12-¾ 80.0 340.0 295.0 19.0 12-¾
10 273 300 480.0 25.5 405.0 355.0 268.9 2-⅜ x 70 12-M24 85.0 405.0 355.0 21.0 12-M24
12 323.9 300 530.5 25.5 460.0 410.0 318.9 2-⅜ x 70 12-M24 90.0 460.0 410.0 24.0 12-M24
14 355.6 300 580.0 30.0 520.0 470.0 350.6 - 16-M24 100.0 520.0 470.0 25.0 16-M24
16 406.4 300 630.0 32.0 580.0 525.0 401.5 - 16-M27 110.0 580.0 525.0 27.0 16-M27
18 457.2 300 693.0 36.0 640.0 585.0 452.2 - 20-M27 115.0 640.0 585.0 20.0 20-M27
20 508.0 300 770.0 36.0 715.0 650.0 503.0 - 20-M30 - - - - -
24 609.6 300 895.0 40.0 840.0 770.0 601.6 - 20-M33 - - - - -

Nominal Size Pipe O.D. Max. Working Pressure Grooved Flange Dimensions Adaptor Flange Dimensions

W Z X Y E Bolt/Nut Size L X Y Z Bolt/Nut Size

Inch mm Psi mm mm mm mm mm mm mm mm mm mm mm
2 60.3 300 206.0 19.0 152.0 121.0 57.5 2-⅜ x 50 4-⅝ 65.0 152.0 120.5 16.0 4-⅝
2½ 73.0 300 230.0 19.0 178.0 140.0 69.8 2-⅜ x 50 4-⅝ 65.0 185.0 139.7 16.0 4-⅝
ANSI 125/150

3 O.D. 76.1 300 230.0 19.0 178.0 140.0 72.7 2-⅜ x 50 4-⅝ - - - - -
3 88.9 300 246.0 19.0 191.0 152.0 85.5 2-⅜ x 50 4-⅝ 65.0 200.0 152.4 16.0 8-⅝
4 114.3 300 280.0 19.0 229.0 191.0 110.5 2-½ x 55 8-⅝ 70.0 229.0 190.5 16.0 8-⅝
5 141.3 250 320.0 22.0 254.0 216.0 137.4 2-½ x 55 8-¾ - - - - -
6 168.3 300 346.0 24.0 280.0 241.3 164.3 2-½ x 55 8-¾ 70.0 282.0 241.3 18.0 8-¾
8 219.1 250 414.3 30.0 341.4 298.5 214.9 2-⅜ x 70 8-¾ 75.0 340.0 298.5 19.0 8-¾
10 273.0 250 481.2 30.3 405.6 362.0 268.9 2-⅜ x 70 12-⅞ 85.0 406.0 362 21.0 12-⅞
12 323.9 250 553.3 30.4 482.6 431.8 318.9 2-⅜ x 70 12-⅞ - - - - -
14 355.6 300 590.0 37.0 535.0 476.3 350.6 - 12-1 127.0 535.0 476.3 37.0 12-1
16 406.4 300 650.0 37.0 595.0 539.8 401.5 - 16-1 127.0 595.0 539.8 37.0 16-1
18 457.2 300 690.0 40.0 635.0 577.8 452.2 - 16-11/8 140.0 642.0 577.8 40.0 16-11/8
20 508.0 300 765.0 43.0 700.0 635.0 503.0 - 20-11/8 152.0 700.0 635.0 43.0 20-11/8
24 609.6 300 875.0 49.0 815.0 749.3 601.6 - 20-1¼ 152.0 815.0 749.3 49.0 20-1¼

Nominal Size Pipe O.D. Grooved Flange Dimensions

Class 300

O.D. of Flange I.D. Thickness PCD O.D. of Bolt Bolt Size

X E Z Y W
Inch mm mm mm mm mm mm Inch
2½ 73.0 190 69.60 24.6 149.2 244.0 8-¾
3 88.9 210 84.60 28.0 168.3 274.0 8-¾
4 114.3 255 110.20 31.5 200.0 310.0 8-¾
6 168.3 320 164.20 35.5 269.9 388.0 12-¾
8 219.1 380 214.93 41.0 330.2 470.4 12-⅞

* Refer to UL/FM certificates for more information. 25

* SHIELD reserves the right to change the contents without notice.
Shield Grooved
Reducing
Tee
SDG-53
Nominal Size Pipe O.D. Maximum Working Pressure C-E C-E

Inch mm Psi mm mm

2x1 60.3 x 33.7 500 70.0 70.0

2 x 1½ 60.3 x 48.3 500 70.0 70.0
2½ x 1½ 73.0 x 48.3 500 76.0 76.0
2½ x 2 73.0 x 60.3 500 69.0 76.0
3 O.D. x 1¼ 76.1 x 42.4 500 76.0 76.0
3 O.D. x 1½ 76.1 x 48.3 500 76.0 76.0
3 O.D. x 2 76.1 x 60.3 500 69.0 76.0
3x1 88.9 x 33.7 500 108.0 108.0
3 x 1¼ 88.9 x 42.4 500 85.5 85.5
3 x 1½ 88.9 x 48.3 500 85.5 85.5
3x2 88.9 x 60.3 500 85.5 85.5
3 x 2½ 88.9 x 73.0 500 85.5 85.5
3 x 2½ 88.9 x 76.1 500 85.5 85.5
4 O.D. x 2 108.0 x 60.3 500 101.0 101.0
4 O.D. x 3 108.0 x 88.9 500 101.0 101.0
4x1 114.3 x 33.7 500 101.0 101.0
4 x 1½ 114.3 x 48.3 500 101.0 101.0
4x2 114.3 x 60.3 500 101.0 101.0
4 x 2½ 114.3 x 73.0 500 101.0 101.0
4 x 2½ 114.3 x 76.1 500 101.0 101.0
4x3 114.3 x 88.9 500 101.0 101.0
5x2 133.0 x 60.3 500 124.0 124.0
5 x 2½ 133.0 x 76.1 500 124.0 124.0
5x4 133.0 x 108.0 500 124.0 124.0
5x4 133.0 x 114.3 500 124.0 124.0
5½ O.D. x 1½ 139.7 x 48.3 500 124.0 124.0
5½ O.D. x 2 139.7 x 60.3 500 124.0 124.0
5½ O.D. x 2½ 139.7 x 76.1 500 124.0 124.0
5½ O.D. x 3 139.7 x 88.9 500 124.0 124.0
5½ O.D. x 4 139.7 x 114.3 500 124.0 124.0
5x2 141.3 x 60.3 500 124.0 124.0
5x3 141.3 x 88.9 500 124.0 124.0
5x4 141.3 x 114.3 500 124.0 124.0
6x2 159.0 x 60.3 500 140.0 140.0
6 x 2½ 159.0 x 76.1 500 140.0 140.0
6x3 159.0 x 88.9 500 140.0 140.0
6x4 159.0 x 108.0 500 140.0 140.0
6x4 159.0 x 114.3 500 140.0 140.0
6x5 159.0 x 133.0 500 140.0 140.0
6½ O.D. x 2 165.1 x 60.3 300 140.0 140.0
6½ O.D. x 2½ 165.1 x 76.1 300 140.0 140.0
6½ O.D. x 3 165.1 x 88.9 300 140.0 140.0

26 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield Grooved
Reducing
Tee (Continued)

SDG-53
Nominal Size Pipe O.D. Maximum Working Pressure C-E C-E

Inch mm Psi mm mm

6½ O.D. x 4 165.1 x 114.3 300 140.0 140.0

6½ O.D. x 5 165.1 x 139.7 300 140.0 140.0
6½ O.D. x 5 165.1 x 133.0 300 140.0 140.0
6x2 168.3 x 60.3 500 140.0 140.0
6 x 2½ 168.3 x 73.0 500 140.0 140.0
6 x 2½ 168.3 x 76.1 500 140.0 140.0
6x3 168.3 x 88.9 500 140.0 140.0
6x4 168.3 x 114.3 500 140.0 140.0
6x5 168.3 x 139.7 300 140.0 140.0
6x5 168.3 x 141.3 300 140.0 140.0
8x4 216.3 x 114.3 300 175.0 175.0
8x6 216.3 x 165.1 300 175.0 175.0
8x2 219.1 x 60.3 500 175.0 175.0
8 x 2½ 219.1 x 76.1 300 175.0 175.0
8x3 219.1 x 88.9 500 175.0 175.0
8x4 219.1 x 108.0 500 175.0 175.0
8x4 219.1 x 114.3 500 175.0 175.0
8x5 219.1 x 133.0 300 175.0 175.0
8x5 219.1 x 139.7 300 175.0 175.0
8x6 219.1 x 159.0 300 175.0 175.0
8x6 219.1 x 165.1 300 175.0 175.0
8x6 219.1 x 168.3 500 175.0 175.0
10 x 6 273.0 x 159.0 500 229.0 229.0
10 x 6 273.0 x 165.1 300 229.0 229.0
10 x 6 273.0 x 168.3 300 229.0 229.0
10 x 8 273.0 x 219.1 300 229.0 229.0
12 x 2½ 323.9 x 73.0 300 254.0 254.0
12 x 3 323.9 x 88.9 300 254.0 254.0
12 x 6 323.9 x 165.1 300 254.0 254.0
12 x 6 323.9 x 168.3 300 254.0 254.0
12 x 8 323.9 x 219.1 300 254.0 254.0
12 x 10 323.9 x 273.0 300 254.0 254.0
14 x 12 480.0 x 323.9 300 335.0 335.0
18 x 14 480.0 x 377.0 300 335.0 335.0
14 x 6 355.6 x 168.3 300 279.0 238.0
14 x 8 355.6 x 219.1 300 280.0 280.0
14 x 10 355.6 x 273.0 300 279.0 257.0
14 x 12 355.6 x 323.9 300 279.0 270.0
14 x 5 377.0 x 133.0 300 240.0 265.0
14 x 6 377.0 x 159.0 300 240.0 265.0
14 x 8 377.0 x 219.1 300 240.0 265.0
14 x 10 377.0 x 273.0 300 240.0 265.0

* Refer to UL/FM certificates for more information. 27

* SHIELD reserves the right to change the contents without notice.
Shield Grooved
Reducing
Tee (Continued)

SDG-53
Nominal Size Pipe O.D. Maximum Working Pressure C-E C-E

Inch mm Psi mm mm

14 x 12 377.0 x 323.9 300 240.0 265.0

16 x 6 406.4 x 168.3 300 305.0 264.0
16 x 8 406.4 x 219.1 300 305.0 273.0
16 x 10 406.4 x 273.0 300 305.0 283.0
16 x 12 406.4 x 323.9 300 305.0 295.0
16 x 14 406.4 x 355.6 300 305.0 305.0
16 x 5 426.0 x 133.0 300 260.0 285.0
16 x 6 426.0 x 159.0 300 260.0 285.0
16 x 8 426.0 x 219.1 300 260.0 285.0
16 x 10 426.0 x 273.0 300 260.0 285.0
16 x 12 426.0 x 323.9 300 260.0 285.0
18 x 6 457.2 x 168.3 300 343.0 298.0
18 x 8 457.2 x 219.1 300 343.0 298.0
18 x 10 457.2 x 273.0 300 343.0 308.0
18 x 12 457.2 x 323.9 300 343.0 321.0
18 x 14 457.2 x 355.6 300 343.0 330.0
18 x 16 457.2 x 406.4 300 343.0 330.0
20 x 6 508.0 x 168.3 300 381.0 324.0
20 x 8 508.0 x 219.1 300 381.0 324.0
20 x 10 508.0 x 273.0 300 381.0 333.0
20 x 12 508.0 x 323.9 300 381.0 346.0
20 x 14 508.0 x 355.6 300 381.0 356.0
20 x 16 508.0 x 406.4 300 381.0 356.0
20 x 18 508.0 x 457.2 300 381.0 368.0
24 x 6 609.6 x 168.3 300 432.0 384.0
24 x 8 609.6 x 219.1 300 432.0 384.0
24 x 10 609.6 x 273.0 300 432.0 384.0
24 x 12 609.6 x 323.9 300 432.0 397.0
24 x 14 609.6 x 355.6 300 432.0 406.0
24 x 16 609.6 x 406.4 300 432.0 406.0
24 x 18 609.6 x 457.2 300 432.0 419.0
24 x 20 609.6 x 508.0 300 432.0 432.0

28 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Concentric
Reducer
Grooved SDG-35 & Threaded SDG-37
Maximum Working SDG-35 Grooved SDG-37 Threaded
Nominal Size Pipe O.D.
Pressure Dimensions Dimensions
E-E E-E
Inch mm Psi
mm mm
1¼ x 1 42.4 x 33.7 500 64.0 64.0
1½ x 1 48.3 x 33.7 500 64.0 64.0
1½ x 1¼ 48.3 x 42.4 500 64.0 -
2x½ 60.3 x 21.3 500 - 64.0
2x¾ 60.3 x 26.9 500 - 64.0
2x1 60.3 x 33.7 500 64.0 64.0
2 x 1¼ 60.3 x 42.4 500 64.0 64.0
2 x 1½ 60.3 x 48.3 500 64.0 64.0
2½ x 1 73.0 x 33.7 500 64.0 64.0
2½ x 1¼ 73.0 x 42.4 500 64.0 64.0
2½ x 1½ 73.0 x 48.3 500 64.0 64.0
2½ x 2 73.0 x 60.3 500 64.0 64.0
2½ x ½ 76.1 x 21.3 500 - 64.0
2½ x ¾ 76.1 x 26.9 500 - 64.0
2½ x 1 76.1 x 33.7 500 64.0 64.0
2½ x 1¼ 76.1 x 42.4 500 64.0 64.0
2½ x 1½ 76.1 x 48.3 500 64.0 64.0
2½ x 2 76.1 x 60.3 500 64.0 64.0
3x½ 88.9 x 21.3 500 - 64.0
3x¾ 88.9 x 26.9 500 - 64.0
3x1 88.9 x 33.7 500 64.0 64.0
3 x 1¼ 88.9 x 42.4 500 64.0 64.0
3 x 1½ 88.9 x 48.3 500 64.0 64.0
3x2 88.9 x 60.3 500 64.0 64.0
3 x 2½ 88.9 x 73.0 500 64.0 64.0
3 x 2½ 88.9 x 76.1 500 64.0 64.0
4x1 108.0 x 33.7 500 - 76.0
4 x 1¼ 108.0 x 42.4 500 - 76.0
4 x 1½ 108.0 x 48.3 500 - 76.0
4x2 108.0 x 60.3 500 76.0 76.0
4 x 2½ 108.0 x 73.0 500 76.0 -
4 x 2½ 108.0 x 76.1 500 76.0 76.0
4x3 108.0 x 88.9 500 76.0 76.0
4x½ 114.3 x 21.3 500 - 76.0
4x¾ 114.3 x 26.9 500 - 76.0
4x1 114.3 x 33.7 500 - 76.0
4 x 1¼ 114.3 x 42.4 500 76.0 76.0
4 x 1½ 114.3 x 48.3 500 76.0 76.0
4x2 114.3 x 60.3 500 76.0 76.0
4 x 2½ 114.3 x 73.0 500 76.0 76.0
4 x 2½ 114.3 x 76.1 500 76.0 76.0
4x3 114.3 x 88.9 500 76.0 76.0
5 x 1½ 133.0 x 48.3 500 - 89.0
5x2 133.0 x 60.3 500 - 89.0
5 x 2½ 133.0 x 76.1 500 - 89.0
5x3 133.0 x 88.9 500 - 89.0
5x4 133.0 x 108.0 500 89.0 -

* Refer to UL/FM certificates for more information. 29

* SHIELD reserves the right to change the contents without notice.
Shield
Concentric
Reducer (Continued)

Grooved SDG-35 & Threaded SDG-37

Maximum Working SDG-35 Grooved SDG-37 Threaded
Nominal Size Pipe O.D.
Pressure Dimensions Dimensions
E-E E-E
Inch mm Psi
mm mm
5x4 133.0 x 114.3 500 89.0 -
5x1 139.7 x 33.7 500 - 89.0
5 x 1¼ 139.7 x 42.4 500 - 89.0
5 x 1½ 139.7 x 48.3 500 - 89.0
5x2 139.7 x 60.3 500 89.0 89.0
5 x 2½ 139.7 x 76.1 500 89.0 89.0
5x3 139.7 x 88.9 500 89.0 89.0
5x4 139.7 x 114.3 500 89.0 89.0
5 x 2½ 141.3 x 73.0 500 89.0 -
5x3 141.3 x 88.9 500 89.0 -
5x4 141.3 x 114.3 500 89.0 89.0
6x¾ 159.0 x 26.9 500 - 102.0
6x1 159.0 x 33.7 500 - 102.0
6 x 1¼ 159.0 x 42.4 500 - 102.0
6 x 1½ 159.0 x 48.3 500 - 102.0
6x2 159.0 x 60.3 500 102.0 102.0
6 x 2½ 159.0 x 76.1 500 102.0 102.0
6x3 159.0 x 88.9 500 102.0 102.0
6x4 159.0 x 108 500 102.0 -
6x4 159.0 x 114.3 500 102.0 102.0
6x5 159.0 x 133.0 500 102.0 -
6x½ 165.1 x 21.3 500 - 102.0
6x¾ 165.1 x 26.9 500 - 102.0
6x1 165.1 x 33.7 500 - 102.0
6 x 1¼ 165.1 x 42.4 500 - 102.0
6 x 1½ 165.1 x 48.3 500 - 102.0
6x2 165.1 x 60.3 500 102.0 102.0
6 x 2½ 165.1 x 76.1 500 102.0 102.0
6x3 165.1 x 88.9 500 102.0 102.0
6x4 165.1 x 108.0 500 102.0 -
6x4 165.1 x 114.3 500 102.0 102.0
6x5 165.1 x 139.7 500 102.0 -
6x5 165.1 x 141.3 500 102.0 -
6x1 168.3 x 33.7 500 - 102.0
6x2 168.3 x 60.3 500 102.0 102.0
6 x 2½ 168.3 x 73.0 500 102.0 -
6 x 2½ 168.3 x 76.1 500 102.0 -
6x3 168.3 x 88.9 500 102.0 -
6x4 168.3 x 114.3 500 102.0 -
6x5 168.3 x 139.7 500 102.0 -
6x5 168.3 x 141.3 500 102.0 -
8x4 216.3 x 114.3 500 127.0 -
8x6 216.3 x 165.1 500 127.0 -
8 x 1½ 219.1 x 48.3 500 - 127.0
8x2 219.1 x 60.3 500 - 127.0
8 x 2½ 219.1 x 73.0 500 127.0 -
8 x 2½ 219.1 x 76.1 500 - 127.0
8x3 219.1 x 88.9 500 127.0 127.0

30 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Concentric
Reducer (Continued)

Grooved SDG-35 & Threaded SDG-37

Maximum Working SDG-35 Grooved SDG-37 Threaded
Nominal Size Pipe O.D.
Pressure Dimensions Dimensions
E-E E-E
Inch mm Psi
mm mm
8x4 219.1 x 108.0 500 127.0 -
8x4 219.1 x 114.3 500 127.0 127.0
8x5 219.1 x 139.7 500 127.0 -
8x5 219.1 x 141.3 500 127.0 -
8x6 219.1 x 159.0 500 127.0 -
8x6 219.1 x 165.1 500 127.0 -
8x6 219.1 x 168.3 500 127.0 -
10 x 6 273.0 x 159.0 500 152.0 -
10 x 6 273.0 x 165.1 500 152.0 -
10 x 6 273.0 x 168.3 500 152.0 -
10 x 8 273.0 x 219.1 500 152.0 -
12 x 8 323.9 x 219.1 500 178.0 -
12 x 10 323.9 x 273.0 500 178.0 -
14 x 5 377.0 x 133.0 300 127.0 -
14 x 6 377.0 x 159.0 300 127.0 -
14 x 6 355.6 x 168.3 300 330.0 -
14 x 8 355.6 x 219.1 300 203.0 -
14 x 10 355.6 x 273.0 300 203.0 -
14 x 12 355.6 x 323.9 300 203.0 -
16 x 8 406.4 x 219.1 300 229.0 -
16 x 10 406.4 x 273.0 300 229.0 -
16 x 12 406.4 x 323.9 300 229.0 -
16 x 14 406.4 x 355.6 300 229.0 -
18 x 6 457.2 x 168.3 300 381.0 -
18 x 10 457.2 x 273.0 300 381.0 -
18 x 12 457.2 x 323.9 300 241.0 -
18 x 14 457.2 x 355.6 300 241.0 -
18 x 16 457.2 x 406.4 300 241.0 -
20 x 8 530.0 x 219.1 300 135.0 -
20 x 12 508.0 x 323.9 300 254.0 -
20 x 14 508.0 x 355.6 300 254.0 -
20 x 16 508.0 x 406.4 300 254.0 -
20 x 18 508.0 x 457.2 300 254.0 -
24 x 16 609.6 x 406.4 300 305.0 -
24 x 18 609.6 x 457.2 300 305.0 -
24 x 20 609.6 x 508.0 300 305.0 -

* Refer to UL/FM certificates for more information. 31

* SHIELD reserves the right to change the contents without notice.
Shield Threaded Outlet
Mechanical
Tee
SDG-42
Maximum Working Bolt
Nominal Size Pipe O.D. Hole Dia Dimensions
Pressure Size
Run x Branch mm Y Z V W
Inch mm Psi +1.6 mm mm mm mm in x mm
1x⅜ 33.7 x 17.2 300 23.5 86 46 26 24.5 5/16 x 30
1x½ 33.7 x 21.3 300 23.5 86 46 26 24.5 5/16 x 30
1 x 3/4 33.7 x 26.9 300 23.5 86 52 41 24.5 5/16 x 30
1x1 33.7 x 33.7 300 23.5 86 57 45 24.5 5/16 x 30
1¼ x 3/8 42.4 x 17.2 300 30 95.5 53 32 29 ⅜ x 35
1¼ x ½ 42.4 x 21.3 300 30 95.5 57 32 29 ⅜ x 35
1¼ x 3/4 42.4 x 26.9 300 30 95.5 57 44 29 ⅜ x 35
1¼ x 1 42.4 x 33.7 300 30 95.5 57 53 29 ⅜ x 35
1½ x ⅜ 48.3 x 17.2 300 30 101.5 53 34 32.5 ⅜ x 35
1½ x ½ 48.3 x 21.3 300 30 101.5 57 35.5 32.5 ⅜ x 35
1½ x 3/4 48.3 x 26.9 300 30 101.5 57 47.5 32.5 ⅜ x 35
1½ x 1 48.3 x 33.7 300 30 101.5 57 56 32.5 ⅜ x 35
2x⅜ 60.3 x 17.2 300 38 116 68 44 39 ⅜ x 55
2x½ 60.3 x 21.3 400 38 116 68 60 39 ⅜ x 55
2 x 3/4 60.3 x 26.9 400 38 116 68 60 39 ⅜ x 55
2x1 60.3 x 33.7 400 38 116 68 60 39 ⅜ x 55
2 x 1¼ 60.3 x 42.4 400 45 116 76 65 39 ⅜ x 55
2 x 1½ 60.3 x 48.3 400 45 116 76 65 39 ⅜ x 55
2½ x ½ 73.0 x 21.3 400 38 137 71 68 49 ½ x 70
2½ x 3/4 73.0 x 26.9 400 38 137 71 68 49 ½ x 70
2½ x 1 73.0 x 33.7 400 38 137 71 70 49 ½ x 70
2½ x 1¼ 73.0 x 42.4 400 51 137 84.5 73 49 ½ x 70
2½ x 1½ 73.0 x 48.3 400 51 137 84.5 73 49 ½ x 70
3 O.D. x ½ 76.1 x 21.3 300 38 137 71 61.5 49.5 ½ x 70
3 O.D. x 3/4 76.1 x 26.9 300 38 137 71 68 49.5 ½ x 70
3 O.D. x 1 76.1 x 33.7 300 38 137 71 75 49.5 ½ x 70
3 O.D. x 1¼ 76.1 x 42.4 300 51 137 84.5 75 49.5 ½ x 70
3 O.D. x 1½ 76.1 x 48.3 300 51 137 84.5 75 49.5 ½ x 70
3x½ 88.9 x 21.3 400 38 152 72.5 71.5 56.5 ½ x 75
3 x 3/4 88.9 x 26.9 400 38 152 72.5 71.5 56.5 ½ x 75
3x1 88.9 x 33.7 400 38 152 72.5 80 56.5 ½ x 75
3 x 11/4 88.9 x 42.4 400 51 152 85.5 80 56.5 ½ x 75
3 x 1½ 88.9 x 48.3 400 51 152 85.5 80 56.5 ½ x 75
3x2 88.9 x 60.3 300 64 152 98 80 56.5 ½ x 75
4½ O.D. x ½ 108.1 x 21.3 300 38 172 78.5 87 64.5 ½ x 75
4½ O.D. x 3/4 108.1 x 26.9 300 38 172 78.5 87 64.5 ½ x 75
4½ O.D. x 1 108.1 x 33.7 300 38 172 78.5 87 64.5 ½ x 75
4½ O.D. 1¼ 108.1 x 42.4 300 51 172 89 87 64.5 ½ x 75
4½ O.D. x 1½ 108.0 x 48.3 300 51 172 89 87 64.5 ½ x 75
4½ O.D. x 2 108.0 x 60.3 300 64 172 106.5 92 64.5 ½ x 75
4½ O.D. x 3 O.D. 108.0 x 76.1 300 70 172 106.5 100 64.5 ½ x 75
4x½ 114.3 x 21.3 400 38 188 78.5 90 70 ½ x 75
4 x 3/4 114.3 x 26.9 400 38 188 78.5 90 70 ½ x 75
4x1 114.3 x 33.7 400 38 188 78.5 93 70 ½ x 75
4 x 1¼ 114.3 x 42.4 400 51 188 89 95 70 ½ x 75
4 x 1½ 114.3 x 48.3 400 51 188 89 97 70 ½ x 75
4x2 114.3 x 60.3 400 64 188 104.5 100 70 ½ x 75
4 x 2½ 114.3 x 73.0 400 70 188 104.5 102 70 ½ x 75
4 x 3 O.D. 114.3 x 76.1 300 70 188 104.5 102 70 ½ x75
4x3 114.3 x 88.9 400 89 188 128 102 70 ½ x75
5½ O.D x 1¼ 133.0 x 42.4 300 51 209 93 105 77 ⅝ x 85
5½ O.D. x 1½ 133.0 x 48.3 300 51 209 93 105 77 ⅝ x 85

* Refer to UL/FM certificates for more information. 33

* SHIELD reserves the right to change the contents without notice.
Shield Threaded Outlet
Mechanical The mechanical tee and cross features a gap between the
bolt pads. Do not attempt to bring bolt pads together which

Tee
would result in metal to metal when tightening bolts and
nuts. Note that excessive torque may cause joint failure - the
following table provides recommended bolt fastening torque.
(Continued) Bolt Size Recommended Bolt Torque
Inch n-m
⅜ 40 ~ 60
½ 110 ~ 135
⅝ 135 ~ 175
¾ 175 ~ 245
⅞ 245 ~ 325

SDG-42
Maximum Working Bolt
Nominal Size Pipe O.D. Hole Dia Dimensions
Pressure Size
Run x Branch mm Y Z V W
Inch mm Psi +1.6 mm mm mm mm in x mm
5½ O.D. x 2 133.0 x 60.3 300 64 209 112.5 110 77 ⅝ x 85
5x½ 139.7 x 21.3 300 38 221.5 78 110 84 ⅝ x 85
5x¾ 139.7 x 26.9 300 38 221.5 78 110 84 ⅝ x 85
5x1 139.7 x 33.7 300 38 221.5 78 110 84 ⅝ x 85
5 x 1¼ 139.7 x 42.4 300 51 221.5 95 112 84 ⅝ x 85
5 x 1½ 139.7 x 48.3 300 51 221.5 95 112 84 ⅝ x 85
5x2 139.7 x 60.3 300 64 221.5 112.5 115 84 ⅝ x 85
5 x 3 O.D. 139.7 x 76.1 300 70 221.5 112.5 115 84 ⅝ x 85
5x3 139.7 x 88.9 300 89 221.5 132 120 84 ⅝ x 85
5x4 139.7 x 114.3 300 114 221.5 156 125 84 ⅝ x 85
6½ O.D. x ½ 159.0 x 21.3 300 38 224 78 116 94 ⅝ x 105
6½ O.D. x 1 159.0 x 33.7 300 38 224 78 116 94 ⅝ x 105
6½ O.D. x 1¼ 159.0 x 42.4 300 51 224 93 118 94 ⅝ x 105
6½ O.D. x 1½ 159.0 x 48.3 300 51 224 93 118 94 ⅝ x 105
6½ O.D. x 2 159.0 x 60.3 300 64 224 112.5 125 94 ⅝ x 105
6½ O.D. x 3 O.D. 159.0 x 76.1 300 70 224 112.5 125 94 ⅝ x 105
6½ O.D. x 3 159.0 x 88.9 300 89 224 133 125 94 ⅝ x 105
6½ O.D. x 4 159.1 x 114.3 175 114 224 156.5 130 94 ⅝ x 105
6 O.D x ½ 165.1 x 21.3 225 38 224 78 110 97.5 ⅝ x 105
6 O.D x ¾ 165.1 x 26.9 300 38 224 78 110 97.5 ⅝ x 105
6 O.D x 1 165.1 x 33.7 300 38 224 78 118 97.5 ⅝ x 105
6 O.D x 1¼ 165.1 x 42.4 300 51 224 93 118 97.5 ⅝ x 105
6 O.D x 1½ 165.1 x 48.3 300 51 224 93 118 97.5 ⅝ x 105
6 O.D x 2 165.1 x 60.3 300 64 224 112.5 128.5 97.5 ⅝ x 105
6 O.D x 3 O.D. 165.1 x 76.1 300 70 224 112.5 128.5 97.5 ⅝ x 105
6 O.D x 3 165.1 x 88.9 300 89 224 132 128.5 97.5 ⅝ x 105
6 O.D x 4 165.1 x 114.3 300 114 224 154 135 97.5 ⅝ x 105
6x1 168.3 x 33.7 300 38 240 77 115 96.5 ⅝ x 105
6 x 1¼ 168.3 x 42.4 300 51 247 95 122 98.5 ⅝ x 105
6 x 1½ 168.3 x 48.3 400 51 247 95 122 98.5 ⅝ x 105
6x2 168.3 x 60.3 300 64 247 112.5 132 98.5 ⅝ x 105 Shield Mechanical
6 x 2½ 168.3 x 73.0 400 70 247 112.5 132 98.5 ⅝ x 105 Tees allow a direct
6 x 3 O.D. 168.3 x 76.1 300 70 247 112.5 132 98.5 ⅝ x 105
branch connection to
6x3 168.3 x 88.9 300 89 247 132 140 98.5 ⅝ x 105
6x4 168.3 x 114.3 300 114 247 160 140 98.5 ⅝ x 105 be made on
8x1 219.1 x 33.7 300 38 320 79.5 150 125 ¾ x 115 a pipe run where
8 x 1¼ 219.1 x 42.4 300 51 320 96.5 150 125 ¾ x 115 sufficient space
8 x 1½ 219.1 x 48.3 300 51 320 96.5 150 125 ¾ x 115 allows a hole
8x2 219.1 x 60.3 400 64 320 117 160 125 ¾ x 115
to be cut.
8 x 2½ 219.1 x 73.0 300 70 320 118 160 125 ¾ x 115
8 x 3 O.D. 219.1 x 76.1 300 70 320 118 160 125 ¾ x 115 Material: Ductile Iron
8x3 219.1 x 88.9 300 89 320 136.5 160 125 ¾ x 115 ASTM A536.
8x4 219.1 x 114.3 300 114 320 164 160 125 ¾ x 115 Gasket Standard
10 x 1½ 273.0 x 48.3 300 51 376 95.5 180 155 ¾ x 120 EPDM. Threads are
10 x 2 273.0 x 60.3 300 64 376 118 185 155 ¾ x 120
available to BSPT
10 x 3 O.D. 273.0 x 76.1 300 70 376 118 190 155 ¾ x 120
10 x 3 273.0 x 88.9 300 89 376 136.5 190 155 ¾ x 120 or NPT and can
10 x 4 273.0 x 114.3 300 114 376 164 190 155 ¾ x 120 be supplied in red
coating or hot
dipped galvanized.

34 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield Grooved Outlet
Mechanical
Tee
SDG-44
Maximum Hole Dia Bolt
Nominal Size Pipe O.D. Dimensions
Working Pressure Size
Run x Branch mm Y Z V W
Inch mm Psi +1.6 mm mm mm mm in x mm
2 x 1¼ 60.3 x 42.4 400.0 45.0 116.0 76.0 69.5 39.0 ⅜ x 55
2 x 1½ 60.3 x 48.3 400.0 45.0 116.0 76.0 69.5 39.0 ⅜ x 55
2½ x 1 73.0 x 33.7 300.0 38.0 137.0 71.0 78.0 49.0 ½ x 70
2½ x 1¼ 73.0 x 42.4 400.0 51.0 137.0 84.5 78.0 49.0 ½ x 70
2½ x 1½ 73.0 x 48.3 400.0 51.0 137.0 84.5 78.0 49.0 ½ x 70
76.1 x 1 76.1 x 33.7 300.0 38.0 137.0 71.0 78.0 49.5 ½ x 70
76.1 x 1¼ 76.1 x 42.4 300.0 51.0 137.0 84.5 78.0 49.5 ½ x 70
76.1 x 1½ 76.1 x 48.3 300.0 51.0 137.0 84.5 78.0 49.5 ½ x 70
3x1 88.9 x 33.7 300.0 38.0 152.0 72.5 84.5 56.5 ½ x 75
3 x 1¼ 88.9 x 42.4 400.0 51.0 152.0 85.5 84.5 56.5 ½ x 75
3 x 1½ 88.9 x 48.3 400.0 51.0 152.0 85.5 84.5 56.5 ½ x 75
3x2 88.9 x 60.3 300.0 64.0 152.0 98.0 84.5 56.5 ½ x 75
4x1 114.3 x 33.7 300.0 38.0 188.0 78.4 102.0 70.0 ½ x 75
4 x 1¼ 114.3 x 42.4 400.0 51.0 188.0 89.0 102.0 70.0 ½ x 75
4 x 1½ 114.3 x 48.3 400.0 51.0 188.0 89.0 102.0 70.0 ½ x 75
4x2 114.3 x 60.3 300.0 64.0 188.0 104.5 102.0 70.0 ½ x 75
4 x 2½ 114.3 x 73.0 400.0 70.0 188.0 104.5 102.0 70.0 ½ x 75
4 x 76.1 114.3 x 76.1 300.0 70.0 188.0 104.5 102.0 70.0 ½ x 75
4x3 114.3 x 88.9 400.0 89.0 188.0 128.0 102.0 70.0 ½ x 75
139.7 x 1¼ 139.7 x 42.4 300.0 51.0 221.5 95.0 118.0 84.0 ⅝ x 85
139.7 x 1½ 139.7 x 48.3 300.0 51.0 221.5 95.0 118.0 84.0 ⅝ x 85
139.7 x 2 139.7 x 60.3 300.0 64.0 221.5 112.5 118.0 84.0 ⅝ x 85
139.7 x 76.1 139.7 x 76.1 300.0 70.0 221.5 112.5 118.0 84.0 ⅝ x 85
139.7 x 3 139.7 x 88.9 300.0 89.0 221.5 132.0 118.0 84.0 ⅝ x 85

* Refer to UL/FM certificates for more information. 35

* SHIELD reserves the right to change the contents without notice.
Shield Grooved Outlet
Mechanical
Tee (Continued)

SDG-44
Maximum Hole Dia Bolt
Nominal Size Pipe O.D. Dimensions
Working Pressure Size
Run x Branch mm Y Z V W
Inch mm Psi +1.6 mm mm mm mm in x mm
139.7 x 4 139.7 x 114.3 300.0 114.0 221.5 160.0 125.0 84.0 ⅝ x 85
5 x 2½ 141.3 x 73.0 300.0 70.0 209.0 109.5 113.0 82.0 ⅝ x 85
159.0 x 2 159.1 x 60.3 300.0 64.0 244.0 112.5 125.0 94.0 ⅝ x 105
159.0 x 108.0 159.1 x 108.0 300.0 114.0 244.0 154.0 133.0 94.0 ⅝ x 105
159.0 x 4 159.1 x 114.3 300.0 114.0 244.0 159.0 125.0 94.0 ⅝ x 105
165.1 x 2 165.1 x 60.3 300.0 64.0 244.0 112.5 127.0 97.5 ⅝ x 105
165.1 x 76.1 165.1 x 76.1 300.0 70.0 244.0 112.5 130.0 97.5 ⅝ x 105
6½ O.D. x 3 165.1 x 88.9 300.0 89.0 244.0 132.0 130.0 97.5 ⅝ x 105
6½ O.D. x 4 165.1 x 114.3 300.0 114.0 244.0 154.0 135.0 97.5 ⅝ x 105
6 x 1½ 168.3 x 48.3 400.0 51.0 247.0 95.0 128.0 98.5 ⅝ x 105
6x2 168.3 x 60.3 300.0 64.0 247.0 114.0 134.0 98.5 ⅝ x 105
6 x 2½ 168.3 x 73.0 400.0 70.0 247.0 112.5 135.0 98.5 ⅝ x 105
6 x 2½ 168.3 x 76.1 300.0 70.0 247.0 112.5 135.0 98.5 ⅝ x 105
6x3 168.3 x 88.9 400.0 89.0 247.0 132.0 136.5 98.5 ⅝ x 105
6x4 168.3 x 114.3 400.0 114.0 247.0 160.0 138.0 98.5 ⅝ x 105
8x2 219.1 x 60.3 400.0 64.0 320.0 118.0 158.0 125.0 ⅝ x 115
8 x 76.1 216.3 x 76.1 300.0 70.0 315.0 117.0 157.0 122.0 ¾ x 115
8 x 21/2 219.1 x 73.0 400.0 70.0 320.0 118.0 158.0 125.0 ¾ x 115
8 x 76.1 219.1 x 76.1 300.0 70.0 320.0 118.0 158.0 125.0 ¾ x 115
8x3 219.1 x 88.9 300.0 89.0 320.0 136.5 161.0 125.0 ¾ x 115
8x4 219.1 x 108.0 300.0 114.0 320.0 162.0 161.0 125.0 ¾ x 115
8x4 219.1 x 114.3 300.0 114.0 320.0 162.0 161.0 125.0 ¾ x 115
10 x 2½ 273.0 x 76.1 300.0 70.0 376.0 118.0 189.0 155.0 ¾ x 120
10 x 3 273.0 x 88.9 300.0 89.0 376.0 136.5 189.0 155.0 ¾ x 120
10 x 4 273.0 x 108 300.0 114.0 376.0 164.0 189.0 155.0 ¾ x 120
10 x 4 273.0 x 114.3 300.0 114.0 376.0 164.0 189.0 155.0 ¾ x 120

36 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield Threaded
Mechanical
Cross

SDG-47
Maximum Working Hole Dia Bolt
Nominal Size Pipe O.D. Dimensions
Pressure Size
Run x Branch mm Y Z V
Inch mm Psi +1.6 mm mm mm in x mm
2½ x ¾ 73.0 x 26.9 300.0 38.0 137.0 71.0 68.0 ½ x 70
2½ x 1 73.0 x 33.7 300.0 38.0 137.0 71.0 70.0 ½ x 70
2½ x 1¼ 73.0 x 42.4 300.0 51.0 137.0 84.5 73.0 ½ x 70
2½ x ½ 76.1 x 21.3 300.0 38.0 137.0 71.0 61.5 ½ x 70
2½ x ¾ 76.1 x 26.9 300.0 38.0 137.0 71.0 75.0 ½ x 70
2½ x 1 76.1 x 33.7 300.0 38.0 137.0 71.0 75.0 ½ x 70
2½ x 1¼ 76.1 x 42.4 300.0 51.0 137.0 84.5 75.0 ½ x 70
3x½ 88.9 x 21.3 300.0 38.0 152.0 72.5 71.5 ½ x 75
3x¾ 88.9 x 26.9 300.0 38.0 152.0 72.5 71.5 ½ x 75
3x1 88.9 x 33.7 300.0 38.0 152.0 72.5 80.0 ½ x 75
3 x 1¼ 88.9 x 42.4 300.0 51.0 152.0 85.5 80.0 ½ x 75
3 x 1½ 88.9 x 48.3 300.0 51.0 152.0 85.5 80.0 ½ x 75
108.0 x 1¼ 108.1 x 42.4 300.0 51.0 172.0 89.0 87.0 ½ x 75
108.0 x 1½ 108.0 x 48.3 300.0 51.0 172.0 89.0 87.0 ½ x 75
108.0 x 2 108.0 x 60.3 300.0 64.0 172.0 106.5 92.0 ½ x 75
4x½ 114.3 x 21.3 300.0 38.0 188.0 78.5 90.0 ½ x 75
4x¾ 114.3 x 26.9 300.0 38.0 188.0 78.5 90.0 ½ x 75
4x1 114.3 x 33.7 300.0 38.0 188.0 78.5 93.0 ½ x 75
4 x 1¼ 114.3 x 42.4 300.0 51.0 188.0 89.0 95.0 ½ x 75
4 x 1½ 114.3 x 48.3 300.0 51.0 188.0 89.0 97.0 ½ x 75
4x2 114.3 x 60.3 300.0 64.0 188.0 104.5 100.0 ½ x 75
133.0 x 2 133.0 x 60.3 300.0 64.0 209.0 112.5 110.0 ⅝ x 85
5x1 139.7 x 33.7 300.0 38.0 221.5 78.0 110.0 ⅝ x 85
5 x 1¼ 139.7 x 42.4 300.0 51.0 221.5 95.0 112.0 ⅝ x 85
5 x 1½ 139.7 x 48.3 300.0 51.0 221.5 95.0 112.0 ⅝ x 85
5x2 139.7 x 60.3 300.0 64.0 221.5 112.5 115.0 ⅝ x 85
5 x 2½ 139.7 x 76.1 300.0 70.0 221.5 112.5 115.0 ⅝ x 85

* Refer to UL/FM certificates for more information. 37

* SHIELD reserves the right to change the contents without notice.
Shield Threaded
Mechanical
Cross (Continued)

SDG-47
Maximum Working Hole Dia Bolt
Nominal Size Pipe O.D. Dimensions
Pressure Size
Run x Branch mm Y Z V
Inch mm Psi +1.6 mm mm mm in x mm
159.0 x 1¼ 159.0 x 42.4 300.0 51.0 244.0 93.0 118.0 ⅝ x 108
159.0 x 1½ 159.0 x 48.3 300.0 51.0 244.0 93.0 118.0 ⅝ x 108
159.0 x 2 159.0 x 60.3 300.0 64.0 244.0 112.5 125.0 ⅝ x 108
159.0 x 76.1 159.0 x 76.1 300.0 70.0 244.0 112.5 125.0 ⅝ x 108
6x½ 165.1 x 21.3 300.0 38.0 244.0 78.0 110.0 ⅝ x 108
6x¾ 165.1 x 26.9 300.0 38.0 244.0 78.0 110.0 ⅝ x 108
6x1 165.1 x 33.7 300.0 38.0 244.0 78.0 118.0 ⅝ x 108
6 x 1¼ 165.1 x 42.4 300.0 51.0 244.0 93.0 118.0 ⅝ x 108
6 x 1½ 165.1 x 48.3 300.0 51.0 244.0 93.0 118.0 ⅝ x 108
6x2 165.1 x 60.3 300.0 64.0 244.0 112.5 128.5 ⅝ x 108
6 x 2½ 165.1 x 76.1 300.0 70.0 244.0 112.5 128.5 ⅝ x 108
6x3 165.1 x 88.9 300.0 89.0 244.0 132.0 128.5 ⅝ x 108
6 x 1¼ 168.3 x 42.4 300.0 51.0 247.0 95.0 130.0 ⅝ x 108
6 x 1½ 168.3 x 48.3 300.0 51.0 247.0 95.0 122.0 ⅝ x 108
6x2 168.3 x 60.3 300.0 64.0 247.0 112.5 132.0 ⅝ x 108
6 x 2½ 168.3 x 73.0 300.0 70.0 247.0 112.5 132.0 ⅝ x 108
6x3 168.3 x 88.9 300.0 89.0 247.0 132.0 140.0 ⅝ x 108
8x1 219.0 x 33.7 300.0 38.0 320.0 79.5 150.0 ¾ x 115
8 x 1¼ 219.1 x 42.4 300.0 51.0 320.0 96.5 150.0 ¾ x 115
8 x 1½ 219.1 x 48.3 300.0 51.0 320.0 96.5 150.0 ¾ x 115
8x2 219.1 x 60.3 300.0 64.0 320.0 117.0 160.0 ¾ x 115
8 x 2½ 219.1 x 76.1 300.0 70.0 320.0 118.0 158.5 ¾ x 115
8x3 219.1 x 88.9 300.0 89.0 320.0 136.5 160.0 ¾ x 115
8x4 219.1 x 114.3 300.0 114.0 320.0 164.0 160.0 ¾ x 115
10 x 1½ 273.0 x 48.3 300.0 51.0 376.0 95.5 180.0 ¾ x 120
10 x 2 273.0 x 60.3 300.0 64.0 376.0 118.0 185.0 ¾ x 120
10 x 2½ 273.0 x 76.1 300.0 70.0 376.0 118.0 190.0 ¾ x 120
10 x 3 273.0 x 88.9 300.0 89.0 376.0 136.5 190.0 ¾ x 120
10 x 4 273.0 x 114.3 300.0 114.0 376.0 164.0 190.0 ¾ x 120

38 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield Grooved
Mechanical
Cross
SDG-49
Maximum Hole Dimensions Bolt
Nominal Size Dia
Pipe O.D. Working Size
Run x Branch mm
mm Pressure Y Z V
Inch +1.6
PSI mm mm mm in x mm
2½ x 1¼ 73.0 x 42.4 300.0 51.0 144.0 84.5 75.0 ½ x 70
2½ x 1 76.1 x 33.7 300.0 38.0 137.0 71.0 78.0 ½ x 70
2½ x 1¼ 76.1 x 42.4 300.0 51.0 137.0 84.5 78.0 ½ x 70
3x1 88.9 x 33.7 300.0 38.0 152.0 72.5 84.5 ½ x 75
3 x 1¼ 88.9 x 42.4 300.0 51.0 152.0 85.5 84.5 ½ x 75
3 x 1½ 88.9 x 48.3 300.0 51.0 152.0 85.5 84.5 ½ x 75
4x1 114.3 x 33.7 300.0 38.0 188.0 78.4 102.0 ½ x 75
4 x 1½ 114.3 x 48.3 300.0 51.0 188.0 89.0 102.0 ½ x 75
4x2 114.3 x 60.3 300.0 64.0 188.0 104.5 102.0 ½ x 75
5x2 139.7 x 60.3 300.0 64.0 221.5 112.5 118.0 ⅝ x 85
5 x 2½ 139.7 x 76.1 300.0 70.0 221.5 112.5 118.0 ⅝ x 85
6x2 165.1 x 60.3 300.0 64.0 244.0 112.5 127.0 ⅝ x 108
6 x 2½ 165.1 x 76.1 300.0 70.0 244.0 112.5 127.0 ⅝ x 108
6x3 165.1 x 88.9 300.0 89.0 244.0 132.0 141.0 ⅝ x 108
6 x 1½ 168.3 x 48.3 300.0 51.0 247.0 95.0 128.0 ⅝ x 108
6x2 168.3 x 60.3 300.0 64.0 247.0 114.0 134.0 ⅝ x 108
6 x 2½ 168.3 x 73.0 300.0 70.0 247.0 115.0 134.0 ⅝ x 108
6x3 168.3 x 88.9 300.0 89.0 247.0 132.0 141.0 ⅝ x 108
8x2 219.1 x 60.3 300.0 64.0 320.0 118.0 158.0 ¾ x 115
8 x 2½ 219.1 x 76.1 300.0 70.0 320.0 118.0 158.0 ¾ x 115
8x3 219.1 x 88.9 300.0 89.0 320.0 136.5 161.0 ¾ x 115
8x4 219.1 x 114.3 300.0 114.0 320.0 162.0 161.0 ¾ x 115
10 x 2½ 273.0 x 76.1 300.0 70.0 376.0 118.0 189.0 ¾ x 120
10 x 3 273.0 x 88.9 300.0 89.0 376.0 136.5 189.0 ¾ x 120
10 x 4 273.0 x 114.3 300.0 114.0 376.0 164.0 189.0 ¾ x 120

* Refer to UL/FM certificates for more information. 39

* SHIELD reserves the right to change the contents without notice.
 Shield U-Bolt
Y
Mechanical
Tee
X
SDG-40
Hole Maximum Dimensions U-Bolt
Nominal
Dia Working Size
Size
mm Pressure X Y Z
Inch
+1.6 PSI mm mm mm in x mm
1¼ x ½ 30.0 300 54.4 88.9 57.2 ⅜ x 73
Z 1¼ x ¾ 30.0 300 54.4 88.9 57.2 ⅜ x 73
1¼ x 1 30.0 300 57.7 88.9 57.2 ⅜ x 73
1½ x ½ 30.0 300 57.7 88.9 57.2 ⅜ x 73
1½ x ¾ 30.0 300 57.7 88.9 57.2 ⅜ x 73
1½ x 1 30.0 300 60.8 88.9 57.2 ⅜ x 73
2x½ 30.0 300 63.3 95.3 57.2 ⅜ x 90
2x¾ 30.0 300 63.3 95.3 57.2 ⅜ x 90
2x1 30.0 300 66.6 95.3 57.2 ⅜ x 90
2 x 1¼ 45.0 300 66.6 120.0 76.0 ½ x 52
2½ x ½ 30.0 300 69.9 108.0 57.2 ⅜ x 105
2½ x ¾ 30.0 300 69.9 108.0 57.2 ⅜ x 105
2½ x 1 30.0 300 73.2 108.0 57.2 ⅜ x 105
76.1 x ½ 30.0 300 69.9 108.0 57.2 ⅜ x 105
76.1 x ¾ 30.0 300 69.9 108.0 57.2 ⅜ x 105
76.1 x 1 30.0 300 73.2 108.0 57.2 ⅜ x 105
88.9 x 1 38.0 300 79.0 145.0 73.0 ½ x 58
4x1 30.0 300 89.0 185.0 72.0 ½ x 70
4 x 1¼ 51.0 300 95.0 185.0 85.0 ½ x 70
4 x 1½ 51.0 300 95.0 185.0 85.0 ½ x 70
6x1 38.0 300 124.0 254.0 75.0 ⅝ x 102

Shield
Groove
A B
t

Specifications
C
O.D

Pipe Outside Diameter Gasket Groove Diameter ‘C’ Groove Width ‘B’ Minimum Pipe Wall Max ‘F’
Nominal Seat ‘A’ Groove Thickness ‘T’ Flare Dia.
Tolerance Roll Cut
Size Depth
Tolerance Groove Groove Roll Cut Roll
Inch ‘D’
Actual (+) (-) (+/-)0.030 Maximum (+)0.000 (+/-)0.030 (+/-)0.031 Groove Groove Groove

1¼ 1.660 0.016 0.016 0.625 1.535 -0.015 0.281 0.312 0.063 0.065 0.140 1.77
1½ 1.900 0.019 0.019 0.625 1.775 -0.015 0.281 0.312 0.063 0.065 0.140 2.01
2 2.375 0.024 0.024 0.625 2.250 -0.015 0.344 0.312 0.063 0.065 0.154 2.48
2½ 2.875 0.029 0.029 0.625 2.720 -0.018 0.344 0.312 0.078 0.083 0.187 2.98
3 O.D. 3.000 0.030 0.030 0.625 2.845 -0.018 0.344 0.312 0.078 0.083 0.188 3.10
3 3.500 0.035 0.031 0.625 3.344 -0.018 0.344 0.312 0.078 0.083 0.188 3.60
4 4.500 0.045 0.031 0.625 4.334 -0.020 0.344 0.312 0.083 0.083 0.203 4.60
5½ O.D. 5.500 0.056 0.031 0.625 5.334 -0.020 0.344 0.375 0.083 0.109 0.203 5.60
5 5.563 0.056 0.031 0.625 5.395 -0.022 0.344 0.375 0.084 0.109 0.203 5.66
6 6.625 0.063 0.031 0.625 6.445 -0.022 0.344 0.375 0.085 0.109 0.219 6.73
8 8.625 0.063 0.031 0.750 8.441 -0.025 0.469 0.375 0.092 0.109 0.238 8.80
10 10.750 0.063 0.031 0.750 10.562 -0.027 0.469 0.500 0.094 0.134 0.250 10.92
12 12.750 0.063 0.031 0.750 12.531 -0.030 0.469 0.500 0.109 0.156 0.279 12.92
14 14.000 0.063 0.031 0.750 13.781 -0.030 0.469 0.500 0.109 0.156 0.281 14.10
16 16.000 0.063 0.031 0.750 15.781 -0.030 0.469 0.500 0.109 0.165 0.312 16.10
18 18.000 0.060 0.030 1.000 17.781 -0.025 0.469 0.500 0.109 0.165 0.312 18.16
20 20.000 0.060 0.030 1.000 19.781 -0.025 0.469 0.500 0.109 0.188 0.312 20.16

40 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
 HHXX.EX6706 - Fittings, Cast Iron, Ductile Iron,
Malleable Iron and Bronze

Fittings, Cast Iron, Ductile Iron, Malleable Iron and Bronze

SHIELD FIRE SAFETY & SECURITY LTD EX6706
Unit 3, Endeavour Dr
Basildon, SS14 3WF United Kingdom

Ductile Iron Fittings (ANSI/ASME B16.3)

Fittings fabricated with dimensional specifications in accordance with ANSI/ASME B16.3 with threads in accordance with either
ASME B1.20.1 or ISO 7-1

Rated
Pressure,
Model Configuration Size, in. psig

SDT 90° Elbow 1/2, 3/4, 1, 500

100 1-1/4, 1-1/2, 2, 2-1/2,
3, 4

SDT 45° Elbow 1/2, 3/4, 1, 500

200 1-1/4, 1-1/2, 2, 2-1/2

SDT Tee 1/2, 3/4, 1, 500

12 1-1/4, 1-1/2, 2, 2-1/2,
3, 4

SDT Hex Bushing 1, 1-1/4, 1-1/2, 2, 500

57 1-1/4x3/4

SDT Straight 1/2, 3/4, 500

22 Coupling w/stop 1, 1-1/4, 1-1/2, 2, 2-1/2

SDT Cross 1, 1-1/4, 1-1/2, 2, 500

13 3/4

SDT Cap 1/2, 3/4, 1, 500

14 1-1/4, 1-1/2, 2, 2-1/2

SDT Union 1, 1-1/4, 1-1/2, 2 500

59

SDC 90° Elbow 1/2, 3/4, 1, 500

100 1-1/4, 1-1/2, 2, 2-1/2,
3, 4

SDC Reducing 90° 3/4, 1, 500

101 Elbow 1-1/4, 1-1/2, 2, 2-1/2,
3x3/4

SDC 45° Elbow 1/2, 3/4, 1, 500

200 1-1/4, 1-1/2, 2, 2-1/2
SDC Tee 1/2, 3/4, 1, 500
12 1-1/4, 1-1/2, 2, 2-1/2,
3, 4

SDC Reducing Tee 3/4, 1, 500

53 1-1/4, 1-1/2, 2, 2-1/2,
3/4x1/2x1/2, 3/4x1/2x3/4,2-1/2x2-1/2x3/4, 2-1/2x2-1/2x1,2-1/2x2-1/2x1-1/4, 2-1/2x2-
1/2x1-1/2,2-1/2x2-1/2x2, 2-1/2x2-1/2x3

SDC Reducing 1/2, 3/4, 1, 1-1/4 500

30
Coupling w/hex 1-1/4x1, 1-1/2x1, 1-1/2x1-1/4, 2x1-1/4, 2x1-1/2 —

SDC Cross 1, 1-1/4, 1-1/2, 2 300

13

SDC Reducing Cross 1-1/4x1, 1-1/2x1, 2x1 300

51

SDC Cored Plugs 3/4, 1, 1-1/4, 1-1/2, 2 300

55

SDC- Solid Plugs 1/2 300

55S

SDT Reducing 90° 3/4 x 1/2 500

101 Elbow

1 x 1/2, 3/4

1-1/4 x 1/2, 3/4, 1

1-1/2 x 1/2, 3/4, 1, 1-1/4;

2 x 1/2, 3/4, 1, 1-1/4, 1-1/2

2-1/2 x 1-1/2, 2

3 x 3/4

SDT Reducing Tee 3/4 x 3/4 x 1/2, 1 500

53+

3/4 x 1/2 x 1/2, 3/4

1 x 1/2 x 1

1 x 3/4 x 3/4, 1

1 x 1 x 1/2, 3/4, 1-1/4, 1-1/2

1-1/4 x 1/2 x 1-1/4

1-1/4 x 3/4 x 1-1/4

1-1/4 x 1 x 1/2, 3/4, 1, 1-1/4

1-1/4 x 1-1/4 x 1/2, 3/4, 1, 1-1/2, 2

1-1/2 x 1/2 x 1-1/4, 1-1/2

1-1/2 x 3/4 x 1-1/4, 1-1/2

1-1/2 x 1 x 1/2, 3/4, 1, 1-1/4, 1-1/2

1-1/2 x 1-1/4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 1, 2

 1-1/2 x 1-1/2 x 1/2, 3/4, 1, 1-1/4, 2

2x1x2

2 x 1-1/4 x 2

2 x 1-1/2 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2

2 x 2 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2-1/2

2-1/2 x 2-1/2 x 3/4, 1, 1-1/4, 1-1/2, 2, 3+

SDT Reducing 1 x 1/2, 3/4 500

30

Coupling w/hex 1-1/4 x 3/4, 1

1-1/2 x 1, 1-1/4

2 x 1, 1-1/4, 1-1/2

SDT Reducing Cross 1-1/4 x 1 500

51

1-1/2 x 1

2x1

SDT Square Head Plug 1/2, 3/4, 500

55

1, 1-1/4, 1-1/2, 2

SDT 90° Elbow 2-1/2 500

100N*

SDT Reducing Tee 1 x 3/4 x 1/2; 500

53* 2 x 1 x 1-1/2;
2 x 1-1/4 x 1-1/4, 2 x 1-1/4 x 1-1/2

SDT Reducing 3/4 x 1/2; 500

30* Coupling 1-1/4 x 1/2;
1-1/2 x 1/2, 1-1/2 x 3/4;
2 x 3/4

SDT Cross 1/2 500

13*

SDT 90° Street Elbow 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 500

110*

* The dimensional specifications in accordance with ANSI/ASME B16.3 Class 150. Threads in accordance with ASME B1.20.1

+ The model SDT 53 in the 2-1/2 x 2-1/2 x 3 inch size is only threaded in accordance with ASME B1.20.1

CAST IRON FITTINGS

Cast Iron Fittings (ANSI/ASME B16.4)

Rated
Pressure,
Model Configuration Size, in. psig

SDT 90° Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 300

100 3, 4
 1-1/2",2"

SDT Extention Short 1/2" 500

231 piece

SDT Elbow, 90 1/2",1-1/4",2" 500

109 degree, plain

SDT Tee, plain 1/2",1",1-1/4", 500

112

1-1/2"

SDT Socket, plain, 1/2",3/4",1",1-1/4", 500

322 with ribs

1-1/2",2",2-1/2",3"

SDT Side outlet elbow 1/2",3/4",1",1-1/4", 500

121

1-1/2",2"

SDT Side outlet tee 1/2",3/4",1" 500

212

Ductile Iron Fittings fabricated with dimensional specifications in accordance with ANSI/ASME B16.14. Threads in accordance with
ISO 7-1.

Model Configuration Size, in. Rated Pressure,

psig

SDT 58 Bushing 2 x 1/2 500

SDT 55 Plug 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 500

Ductile Iron Fittings fabricated with dimensional specifications in accordance with EN 10242, Threads in accordance with ISO 7-1.

Model Configuration Size, in. Rated Pressure,

psig

SDT 11 Hexagon Nipple 2-1/2, 3 500

Trademark and/or Tradename: "SD", , , ,

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be Certified and
covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide Information,
Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner,
without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ with permission from UL Solutions" must
appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "©2023
UL LLC."
 VIZM.EX6660 - Fittings, Rubber Gasketed

Fittings, Rubber Gasketed

SHIELD FIRE SAFETY & SECURITY LTD EX6660
Unit 3, Endeavour Dr
Basildon, SS14 3WF United Kingdom

Coupling

Rated Pressure
Model Groove Type Pipe Size (in.) (psig)

SDG-24 Rolled, Cut 4200 E 1-1/4, 1-1/2, 2 500

SDG-24 Rolled, Cut 4200 E 3, 4 300

SDG-24 Rolled, Cut 4200 E 76.1mm 300

SDG-24 Rolled, Cut 4200 D 139.7mm 300

SDG-24 Rolled, Cut 1387-M 165.1mm 300

SDG-24 Rolled, Cut 3454-20 216.3mm 300

SDG-24 Rolled 10 2-1/2 500

SDG-24 Rolled 10 6, 8, 10 300

SDG-24 Rolled, Cut 40 2-1/2 500

SDG-24 Rolled, Cut 40 6, 8, 10 300

SDG-24 Rolled 10 6, 8, 10 300

SDG-24 Rolled, Cut 40 2-1/2 500

SDG-24 Rolled, Cut 40 6, 8, 10 300

SDGL Rolled T3091 1, 1-1/4, 1-1/2, 2, 3 OD, 3, 4 400

22V

SDGL Rolled T3091 5-1/2 OD, 6, 8 / 6 mm, 10 / 8 mm, 12 / 8 mm 300

22V

SDGL Rolled T3091- 6-1/2 OD 300

22V 1993

SDGL Rolled T17395 2-1/2 / 4 mm, 4-1/4 OD / 4.5 mm 400

22V

SDGL Rolled T17395 5-1/4 OD / 5 mm, 5 / 4 mm, 6-1/4 OD / 6 mm 300

22V

SDGL Rolled 5 2 300

26
SDGL Rolled 10 2, 2-1/2, 3 300
26

SDGL Rolled 10 4, 5, 6 300

26

SDGL Rolled, Cut 40 2, 2-1/2, 3 500

26

SDGL Rolled, Cut 40 4, 5, 6 300

26

SDGL Rolled GB/T 3091 2, 2-1/2, 3 300

26

SDGL Rolled GB/T 3091 4, 6-1/2OD 300

26

SDGL Rolled WGalweld 2, 2-1/2, 3, 4 300

26 7

SDGL Rolled, Cut GB/T 5-1/2OD/4.5mm 300

26 17395

SDGL Rolled, Cut GB/T 3OD/4mm 400

26 17395

SDGL Rolled GB/T 6/4.5mm 300

26 21835

SDGL Rolled 5 1-1/4, 1-1/2, 2 300

24

SDGL Rolled 10 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 500

24

SDGL Rolled 10 5, 6, 8, 10 300

24

SDGL Rolled, Cut 40 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 400

24

SDGL Rolled, Cut 40 5, 6, 8, 10, 12 300

24

SDGL Rolled GB/T 3091 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 400

24

SDGL Rolled GB/T 3091 5-1/2OD, 6-1/2OD, 8 300

24

SDGL Rolled WGalweld 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 300

24 7

SDGL Rolled, Cut GB/T 3OD/4mm, 4-1/4OD/4mm, 5-1/2OD/4.5mm, 6- 300

24 17395 1/4OD/5mm

SDGL Rolled, Cut JIS G3452 216.3mm, 267.4mm 300

24

SDGL Rolled GB/T 6/4.5mm, 10/6.3mm, 12/7.1mm 300

24 21835

SDG 20 Rolled 10 4 365

 SDG 20 Rolled 10 3, 6, 8, 10 300

SDG 20 Rolled 40 3, 4, 6, 8, 10 300

SDG 20 Rolled 1387-M 3 OD, 5-1/2 OD, 6-1/2 OD 300

SDG 20 Rolled 1387-H 3 OD, 5-1/2 OD, 6-1/2 OD 300

SDG 20 Rolled, Cut 4200 108.0 / 4.0mm, 141.3 / 6.3mm, 159.0 / 4.0mm 300

SDG 20 Rolled, Cut 3454-20 216.3 / 6.4mm 300

SDG 28 Rolled 10 2, 2-1/2, 3, 4, 5, 6, 8 750

SDG 28 Rolled, cut 40 2, 2-1/2, 3, 4, 5, 6, 8 750

SDG 28 Rolled, cut T21835 3OD(5.0mm), 5-1/2OD (6.3mm), 6-1/2OD(7.1mm) 750

SDG 28 Rolled 10 10, 12 500

SDG 28 Rolled, cut 40 10, 12 500

Flexible coupling

Rated Pressure
Model Groove Type Pipe Size (in.) (psig)

SDGL 25V Rolled T3091 1, 1-1/4, 1-1/2, 2, 3 OD, 3, 4 400

SDGL 25V Rolled T3091 5-1/2 OD, 6, 8 / 6 mm, 10 / 8 mm, 12 / 8 mm 300

SDGL 25V Rolled T3091-1993 6-1/2 OD 300

SDGL 25V Rolled T17395 2-1/2 / 4 mm, 4-1/4 OD / 4.5 mm 400

SDGL 25V Rolled T17395 5-1/4 OD / 5 mm, 5 / 4 mm, 6-1/4 OD / 6 mm 300

SDGL 27 Rolled 10 2, 3, 4, 6 500

SDGL 27 Rolled 10 8 400

SDGL 27 Cut 40 2, 3, 4, 6 500

SDGL 27 Cut 40 8, 10, 12 400

Rolled 10 2, 2-1/2, 3, 4, 5 300

SDG 30

Rolled 10 1-1/4, 1-1/2, 6, 8 500

SDG 30

Rolled 1387-10 3 OD, 6-1/2 OD 300

SDG 30

Rolled 1387-M 5-1/2 OD 450

SDG 30

Rolled 1387-M, 10 3 OD x 1-1/2, 2; 300

SDG 30 3 x 3 OD;
4 x 3 OD;
8 x 6-1/2 OD

Rolled EN10255-M 88.9mm x 60.3mm; 360

SDG 30 114.3mm x 60.3mm, 88.9mm;
165.1mm x 114.3mm;
 Rolled, Cut 40 2, 2-1/2, 3, 4, 5 300
SDG 30

Rolled, Cut 40 1-1/4, 1-1/2, 6, 8 500

SDG 30

Rolled, Cut 1387-40 3 OD, 6-1/2 OD 300

SDG 30

Rolled, Cut 1387-H 5-1/2 OD 450

SDG 30

Rolled, Cut 1387-H, 40 3 OD x 1-1/2, 2; 300

SDG 30 3 x 3 OD;
4 x 3 OD;
8 x 6-1/2 OD

Rolled EN10255-H 88.9mm x 60.3mm; 360

SDG 30 114.3mm x 60.3mm, 88.9mm;
165.1mm x 114.3mm;

Rolled, cut 10, 40 2-1/2 x 2; 360

SDG 30 3 x 2, 2-1/2;
4 x 2, 2-1/2, 3;
5 x 4;6 x 4, 5;
8x6

Rolled, Cut 4200 33.7 / 3.2mm, 108.0 / 4.0mm 500

SDG 30

Rolled, Cut 4200 133.0 / 5.4mm, 159.0 / 4.0mm 300

SDG 30

Rolled, Cut 4200 73.0 / 3.2 x 33.7 / 3.2mm; 300

SDG 30 76.1 / 3.6 x 33.7 / 3.2mm;
88.9 / 3.2 x 33.7 / 3.2mm;
114.3 / 3.6 x 33.7 / 3.2mm;
168.3 / 4.0 x 88.9 / 3.2mm

Rolled, cut 4200 60.3mm(4.0mm) x 33.7(3.2mm), 360

SDG 30 48.3mm(4.0mm);
219.1mm(5.0mm) x 168.3mm(5.0mm)

Rolled, Cut 4200 273.0 / 6.3mm, 323.9 / 6.3mm 500

SDG 30

Rolled, Cut 10, 40 6 x 6-1/2OD(6.3mm) 300

SDG 30

Rolled GB/T 21835 6-1/2OD(6.3mm) x 3; 300

SDG 30

Rolled, Cut GB/T 21835 3OD(4.5mm) x 2-1/2(4.5mm) 300

SDG 30

SDG 27 Rolled, Cut 4200 60.3 / 3.2mm, 73.0 / 3.2mm, 76.1 / 3.6mm, 88.9 / 750
3.2mm, 114.3 / 3.6mm, 141.3 / 6.3mm

SDG 27 Rolled, Cut 4200 168.3 / 4.0mm, 219.1 / 5.0mm 750

SDG 27 Rolled, Cut EN10255-M 139.7mm, 165.1 / 5.0mm 750

SDG 27 Rolled 10 12 500

SDG 27 Rolled, Cut 40 12 500

SDG 27 Rolled 10 2, 2-1/2, 3, 4, 5, 6, 8 750

 SDG 27 Rolled, Cut 40 2, 2-1/2, 3, 4, 5, 6, 8 750

Reducing Coupling

Rated
Groove Pressure
Model Type Pipe Size (in.) (psig)

SDGL Rolled T3091 2x1-1/2, 3 ODx1-1/2, 3 ODx2, 3x1-1/2, 3x2, 3x3 OD, 4x1-1/2, 300
30 4x2, 4x3 OD, 4x3, 6x3, 6x4, 8 / 6 mm x6

SDGL Rolled T17395xT3091 2-1/2 / 4 mm x1-1/2, 2-1/2 / 4 mm x2 300

30

SDGL Rolled T3091xT17395 3x2-1/2 / 4 mm, 4x2-1/2 / 4 mm 300

30

Side outlet

Rated
Outlet Pressure
Model Type Pipe Size (in.) (psig)

SDG Grooved 10, 40 2 x 1-1/4, 1-1/2; 300

49 2-1/2 x 1-1/4, 1-1/2;
3 x 1-1/4, 1-1/2, 2;
4 x 1-1/4, 1-1/2, 2, 2-1/2, 3;
5 x 1-1/4, 1-1/2, 2, 2-1/2, 3;
6 x 1-1/4, 1-1/2, 2, 2-1/2, 3, 4

SDG Grooved 1387- 3 OD x 1-1/4, 1-1/2; 300

49 M, 5-1/2 OD x 2, 2-1/2, 3;
1387- 6-1/2 OD x 2, 2-1/2, 3
H

SDG Threaded 10, 40 2 x 1-1/4, 1-1/2; 300

47 2-1/2 x 1-1/4, 1-1/2;
3 x 1-1/4, 1-1/2, 2;
4 x 1-1/4, 1-1/2, 2, 2-1/2, 3;
5 x 1-1/4, 1-1/2, 2, 2-1/2, 3;
6 x 1-1/4, 1-1/2, 2, 2-1/2, 3, 4

SDG Threaded 1387- 3 OD x 1, 1-1/4, 1-1/2; 300

47 M, 5-1/2 OD x 1, 1-1/4, 1-1/2, 2, 2-1/2, 3;
1387- 6-1/2 OD x 1, 1-1/4, 1-1/2, 2, 2-1/2, 3
H

SDGL Rolled T3091 2x1, 2x1-1/4, 2x1-1/2, 3 ODx1, 3 ODx1-1/4, 3 ODx1-1/2, 3x1, 3x1-1/4, 300
44 3x1-1/2, 3x2, 4x1, 4x1-1/4, 4x1-1/2, 4x2

SDGL Rolled T3091 5-1/2 ODx1, 5-1/2 ODx1-1/4, 5-1/2 ODx1-1/2, 5-1/2 ODx2, 5-1/2 ODx3 300
44 OD, 6-1/2 ODx1, 6-1/2 ODx1-1/4, 6-1/2 ODx1-1/2, 6-1/2 ODx2, 6-1/2
ODx3 OD, 6-1/2 ODx3, 6x1, 6x1-1/4, 6x1-1/2, 6x2, 6x3 OD, 6x3, 8 / 6 mm
x1, 8 / 6 mm x1-1/4, 8 / 6 mm x1-1/2, 8 / 6 mm x2, 8 / 6 mm x3 OD, 8 / 6
mm x3, 8 / 6 mm x4

SDGL Grooved 10, 40 2-1/2 x 1; 4 x 2-1/2, 3OD, 3 300

44

SDGL Grooved GB/T 4 x 3OD, 3 5-1/2OD x 3; 6-1/2OD x 4 300

44 3091
SDGL Threaded T3091 1-1/2x1, 3 ODx2, 5x1, 5x1-1/4, 5x1-1/2, 5x2 232
42

SDGL Threaded T3091 2x1, 2x1-1/4, 2x1-1/2, 3 ODx1, 3 ODx1-1/4, 3 ODx1-1/2, 3x1, 3x1-1/4, 300
42 3x1-1/2, 3x2, 4x1, 4x1-1/4, 4x1-1/2, 4x2, 5-1/2 ODx1, 5-1/2 ODx1-1/4, 5-
1/2 ODx1-1/2, 5-1/2 ODx2, 5-1/2 ODx3 OD, 6-1/2 ODx1, 6-1/2 ODx1-1/4,
6-1/2 ODx1-1/2, 6-1/2 ODx2, 6-1/2 ODx3 OD, 6-1/2 ODx3, 6x1, 6x1-1/4,
6x1-1/2, 6x2, 6x3 OD, 6x3, 8 / 6 mm x1, 8 / 6 mm x1-1/4, 8 / 6 mm x1-
1/2, 8 / 6 mm x2, 8 / 6 mm x3 OD, 8 / 6 mm x3, 8 / 6 mm x4

SDGL Threaded 10, 40 2-1/2 x 1-1/4; 4 x 2-1/2, 3OD, 3 300

42

SDGL Threaded GB/T 4 x 3OD, 3 5-1/2OD x 3 300

42 3091

SDGL Threaded T3091 1x1/2, 1x3/4, 1-1/4x1/2, 1-1/4x3/4, 1-1/4x1, 1-1/2x1/2, 1-1/2x3/4, 1- 300
40 1/2x1, 2x1/2, 2x3/4, 2x1, 3 ODx1/2, 3 ODx3/4, 3 ODx1

SDGL Threaded T17395 2-1/2 / 4 mm x1/2, 2-1/2 / 4 mm x3/4, 2-1/2 / 4 mm x1 300

40

SDGL Grooved 10, 40 2 x 1-1/4, 1-1/2; 2-1/2 x 1-1/4, 1-1/2; 3 x 1-1/4, 1-1/2, 2; 4 x 1-1/4, 1-1/2, 300
44V 2, 2-1/2; 5 x 1-1/2, 2, 2-1/2; 6 x 1-1/4, 1-1/2, 2, 2-1/2; 8 x 2, 2-1/2

SDGL Threaded 10, 40 2 x 1/2, 3/4, 1, 1-1/4, 1-1/2; 2-1/2 x 1/2, 3/4, 1, 1-1/4, 1-1/2; 3 x 1/2, 3/4, 300
42V 1, 1-1/4, 1-1/2, 2; 4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2; 5 x 1, 1-1/4, 1-1/2,
2, 2-1/2; 6 x 1-1/4, 1-1/2, 2, 2-1/2

SDG Grooved 10, 40 3 x 2; 300

44

4 x 2, 3OD;

5 x 1-1/4, 1-1/2, 2, 2-1/2, 3;

6 x 1-1/4, 2, 3OD;

10 x 3OD, 3

SDG Grooved 1387- 3 OD x 1-1/4, 1-1/2; 300

44 M,
1387-H

5-1/2 OD x 2, 2-1/2, 3;

6-1/2 OD x 2, 2-1/2, 3

SDG Grooved 10, 40 3 x 1; 300

44

4 x 1;

8 x 76.1mm, 3, 108.0mm, 4

SDG Grooved 10, 40 2 x 1-1/4, 1-1/2; 400

44 2-1/2 x 1-1/4, 1-1/2;
3 x 1-1/4, 1-1/2;
4 x 1-1/4, 1-1/2, 2-1/2, 3;
6 x 1-1/2, 2-1/2, 3, 4;
8 x 2, 2-1/2

SDG Grooved 4200 76.1 / 3.6 x 33.7 / 3.2mm; 300

44

133.0 / 3.2mm x 88.9mm;

 139.7 / 3.6mm x 42.4mm, 48.3mm;

273.0 / 6.3 x 108.0 / 4.0mm, 114.3 / 3.6mm

SDG Grooved 4200 139.7 / 3.6mm x 114.3mm; 175

44

159.0 / 4.5mm x 108.0mm, 114.3mm

SDG Grooved 1387-M 165.1 x 114.3mm 225

44

SDG Grooved GB/T 6-1/4OD(6.3mm) x 2 300

44 21835

SDG Grooved 10, 40 3 x 1, 1-1/4, 1-1/2, 2; 300

44

4 x 1, 1-1/4, 1-1/2, 2, 2-1/2, 76.1mm, 3;

5 x 2;

6 x 1-1/4, 1-1/2, 2, 2-1/2, 76.1mm, 3;

8 x 2, 2-1/2, 76.1mm, 3, 108.0mm, 4

SDG Grooved 10, 40 6x4 225

44

SDG Grooved 10, 40 5 x 2-1/2, 3 400

44

SDG Grooved 4200 133.0 / 3.2mm x 88.9mm; 300

44

139.7 / 3.6mm x 42.4mm, 48.3mm, 60.3mm, 76.1mm, 88.9mm

SDG Grooved 4200 139.7 / 3.6mm x 114.3mm; 175

44

159.0 / 4.5mm x 108.0mm, 114.3mm

SDG Grooved 1387-M 165.1 x 42.4mm, 48.3mm, 60.3mm, 76.1mm, 88.9mm 300
44

SDG Grooved 1387-M 165.1 x 108.0mm, 114.3mm 225

44

SDG Grooved GB/T 6-1/4OD(6.3mm) x 3 300

44 21835

SDG Threaded 10, 40 1 x 1/2; 300

42

1-1/4 x 1/2, 3/4;

1-1/2 x 1/2, 3/4

3 x 2;

4 x 2;

5 x 1-1/4, 1-1/2, 2, 2-1/2, 3;

6 x 1-1/4, 2, 3
SDG Threaded 1387- 3 OD x 1, 1-1/4, 1-1/2; 300
42 M,
1387-H

5-1/2 OD x 1, 1-1/4, 1-1/2, 2, 2-1/2, 3;

6-1/2 OD x 1, 1-1/4, 1-1/2, 2, 2-1/2, 3

SDG Threaded 10, 40 8 x 1, 1-1/4, 1-1/2, 2-1/2, 76.1mm, 3, 4 300

42

SDG Threaded 10, 40 2 x 1, 1-1/4, 1-1/2; 400

42 2-1/2 x 1, 1-1/4, 1-1/2;
3 x 1/2, 3/4, 1, 1-1/4, 1-1/2;
4 x 1/2, 3/4, 1, 1-1/4, 1-1/2,
2-1/2, 3;
6 x 1-1/2, 2-1/2, 4;
8x2

SDG Threaded 4200 273.0 / 6.3 x 114.3 / 3.6mm 225

42

SDG Threaded 4200 139.7 / 3.6mm x 114.3mm; 175

42

159.0 / 4.5mm x 114.3mm

SDG Threaded 4200 76.1 / 3.6 x 21.3 / 2.8mm, 26.9 / 2.9mm; 300
42

108.0 / 3.6mm x 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm,

76.1mm;

133.0 / 3.2mm x 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm,

76.1mm, 88.9mm;

139.7 / 3.6mm x 21.3mm, 26.9mm;

159.0 / 4.5mm x 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm,

76.1mm, 88.9mm;

273.0 x 48.3 / 4.0mm, 60.3 / 3.2mm, 76.1 / 3.6mm, 88.9 / 3.2mm

SDG Threaded 4200 60.3mm(3.2mm) x 21.3mm(2.8mm), 400

42 26.9mm(2.9mm);
73.0mm(3.2mm) x 21.3mm(2.8mm),
26.9mm(2.9mm);

SDG Threaded 1387-M 165.1 x 21.3mm, 26.9mm 300

42

SDG Threaded 1387-M 165.1 x 114.3mm 225

42

SDG Threaded 10, 40 3 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2; 300

42

4 x 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 76.1mm, 3;

5 x 2;

6 x 1, 1-1/4, 1-1/2, 2, 2-1/2, 76.1mm, 3;

8 x 1, 1-1/4, 1-1/2, 2, 2-1/2, 76.1mm, 3, 4

SDG Threaded 10, 40 6x4 225

42
 SDG Threaded 4200 108.0 / 3.6mm x 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm, 300
42 76.1mm;

133.0 / 3.2mm x 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm,

76.1mm, 88.9mm;

139.7 / 3.6mm x 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm,

76.1mm, 88.9mm;

159.0 / 4.5mm x 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm,

76.1mm, 88.9mm

SDG Threaded 4200 139.7 / 3.6mm x 114.3mm; 175

42

159.0 / 4.5mm x 114.3mm

SDG Threaded 1387-M 165.1 x 21.3mm, 26.9mm, 33.7mm, 42.4mm, 48.3mm, 60.3mm, 76.1mm, 88.9mm 300
42

SDG Threaded 1387-M 165.1 x 114.3mm 225

42

SDG Threaded 10, 40 5 x 1-1/2 400

42

SDG Threaded 10, 40 2 x 1-1/4, 1-1/2; 300

48 and
Grooved

2-1/2 x 1-1/4, 1-1/2;

3 x 1-1/4, 1-1/2, 2;

4 x 1-1/4, 1-1/2, 2, 2-1/2, 3;

5 x 1-1/4, 1-1/2, 2, 2-1/2, 3;

6 x 1-1/4, 1-1/2, 2, 2-1/2, 3, 4

SDG Threaded 1387- 3 OD x 1-1/4, 1-1/2; 300

48 and M,
Grooved 1387-H

5-1/2 OD x 2, 2-1/2, 3;

6-1/2 OD x 2, 2-1/2, 3

Flange adapter

Rated
Groove Pressure
Model Type Pipe Size (in.) (psig)

SDGL 15B Rolled T3091 2, 3 OD, 3, 4, 5-1/2 OD, 6, 8 / 6 mm 300

SDGL 15B Rolled T3091- 6-1/2 OD 300

1993

SDGL 15B Rolled T17395 2-1/2 / 4 mm, 4-1/4 OD / 4.5 mm, 5-1/4 OD / 5 mm, 5 / 4 mm, 300
6-1/4 / 6 mm

SDGL 15D Rolled 10, 40 2, 2-1/2, 3, 4, 5, 6, 8 300

SDGL 15D Rolled 10, 40 10 175

 SDG 15C Rolled, 1387-M 165.1mm 225
Cut

SDG 15E Rolled 10 2, 3, 4, 8 300

SDG 15E Rolled, 40 2, 3, 4, 8 300

Cut

SDG 15E Rolled GB/T 6-1/2OD(6.3mm) 300

21835

Side outlet

Rated
Pressure
Model Outlet Type Pipe Size (in.) (psig)

SDG 40 Threaded 4200 42.4 / 3.6 x 21.3 / 2.8 mm, 26.9 / 2.9 mm, 33.7 / 3.2 mm; 300
48.3 / 4.0 x 21.3 / 2.8 mm, 26.9 / 2. 9 mm, 33.7 / 3.2 mm;
60.3 / 3.2 x 21.3 / 2.8 mm, 26.9 / 2.9 mm, 33.7 / 3.2 mm;
73.0 / 3.2 x 21.3 / 2.8 mm, 26.9 / 2.9 mm, 33.7 / 3.2 mm;
76.1 / 3.6 x 21.3 / 2.8 mm, 26.9 / 2.9 mm, 33.7 / 3.2 mm;
88.9 / 3.2 x 33.7 / 3.2 mm

SDG 18 Rolled 10 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 300

SDG 18 Rolled, Cut 40 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 300

SDG 18 Rolled, Cut T21835 3OD(4.5mm), 5-1/2OD(5.6mm), 300

6-1/2OD(6.3mm)

SDG 18 Rolled, Cut 3454-40 216.3mm 300

SDG 18 Rolled, Cut 3452-SGP 216.3mm 300

SDG 18 Rolled, Cut EN 10255-H 76.1mm(4.5mm), 139.7mm(5.4mm), 165.1mm(5.4mm) 300

SDG 19 Rolled 10 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 300

SDG 19 Rolled, Cut 40 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 300

SDG 19 Rolled, Cut T21835 3OD(4.5mm), 5-1/2OD(5.6mm), 300

6-1/2OD(6.3mm)

SDG 19 Rolled, Cut 3454-40 216.3mm 300

SDG 19 Rolled, Cut 3452-SGP 216.3mm 300

SDG 19 Rolled, Cut EN 10255-H 76.1mm(4.5mm), 139.7mm(5.4mm), 165.1mm(5.4mm) 300

Coupling

Rated
Model Groove Pipe Size (in.) Pressure
Type (psig)

SDG 22 Rolled 10 1-1/4, 1-1/2, 2-1/2 500

SDG 22 Rolled 10 2, 3, 4, 5, 6 500

SDG 22 Rolled 10 8 500

 SDG 22 Rolled 10 10, 12 500

SDG 22 Rolled 1387-10 3 OD, 6-1/2 OD 300

SDG 22 Rolled 1387-M 5-1/2 OD 450

SDG 22 Rolled, 40 1-1/4, 1-1/2 500

Cut

SDG 22 Rolled, 40 2, 2-1/2, 3, 4, 5, 6 500

Cut

SDG 22 Rolled, 40 8 500

Cut

SDG 22 Rolled, 40 10, 12 500

Cut

SDG 22 Rolled ASME 14, 16, 18, 20, 24 300

B36.10M-10

SDG 22 Rolled, ASME 14, 16, 18, 20, 24 300

Cut B36.10M-40

SDG 22 Rolled, 1387-40 3 OD, 6-1/2 OD 300

Cut

SDG 22 Rolled, 1387-H 5-1/2 OD 450

Cut

SDG 22 Rolled, 4200 33.7 / 3.2mm, 108.0 / 4.0mm 500

Cut

SDG 22 Rolled, 4200 133.0 / 5.4mm, 159.0 / 4.0mm 300

Cut

SDG 22 Rolled, 3454-20 267.4 / 6.4mm, 318.5 / 6.4mm 225

Cut

SDG 22 Rolled, 4200 355.6 / 6.3mm, 406.4 / 6.3mm 175

Cut

Flexible coupling

Rated
Model Groove Pipe Size (in.) Pressure
Type (psig)

SDG 25 Rolled 10 2, 2-1/2, 3, 4, 5 300

SDG 25 Rolled 10 1-1/4, 1-1/2, 6, 8 500

SDG 25 Rolled 1387-10 3 OD, 6-1/2 OD 300

SDG 25 Rolled 1387-M 5-1/2 OD 450

SDG 25 Rolled 1387-M, 10 3 OD x 1-1/2, 2; 300

3 x 3 OD;
4 x 3 OD;
8 x 6-1/2 OD

SDG 25 Rolled EN10255-M 88.9mm x 60.3mm; 360

114.3mm x 60.3mm, 88.9mm;
165.1mm x 114.3mm;
SDG 25 Rolled, 40 2, 2-1/2, 3, 4, 5 300
Cut

SDG 25 Rolled, 40 1-1/4, 1-1/2, 6, 8 500

Cut

SDG 25 Rolled, 1387-40 3 OD, 6-1/2 OD 300

Cut

SDG 25 Rolled ASME 14, 16, 18, 20 ,24 300

B36.10M-10

SDG 25 Rolled, ASME 14, 16, 18, 20 ,24 300

Cut B36.10M-40

SDG 25 Rolled, 1387-H 5-1/2 OD 450

Cut

SDG 25 Rolled, 1387-H, 40 3 OD x 1-1/2, 2; 300

Cut 3 x 3 OD;
4 x 3 OD;
8 x 6-1/2 OD

SDG 25 Rolled EN10255-H 88.9mm x 60.3mm; 360

114.3mm x 60.3mm, 88.9mm;
165.1mm x 114.3mm;

SDG 25 Rolled 10 2-1/2 x 2; 360

3 x 2, 2-1/2;
4 x 2, 2-1/2, 3;
5 x 4;6 x 4, 5;
8x6

SDG 25 Rolled, cut 40 2-1/2 x 2; 360

3 x 2, 2-1/2;
4 x 2, 2-1/2, 3;
5 x 4;6 x 4, 5;
8x6

SDG 25 Rolled, 4200 33.7 / 3.2mm, 108.0 / 4.0mm 500

Cut

SDG 25 Rolled, 4200 133.0 / 5.4mm, 159.0 / 4.0mm 300

Cut

SDG 25 Rolled, 4200 73.0 / 3.2 x 33.7 / 3.2mm; 300

Cut 76.1 / 3.6 x 33.7 / 3.2mm;
88.9 / 3.2 x 33.7 / 3.2mm;
114.3 / 3.6 x 33.7 / 3.2mm;
168.3 / 4.0 x 88.9 / 3.2mm

SDG 25 Rolled, cut 4200 60.3mm(4.0mm) x 33.7(3.2mm), 360

48.3mm(4.0mm);
219.1mm(5.0mm) x 168.3mm(5.0mm)

SDG 25 Rolled, 4200 273.0 / 6.3mm, 323.9 / 6.3mm 500

Cut

SDG 23 Rolled 10 2, 3, 4, 6, 10 300

SDG 23 Rolled Cut 40 2, 3, 4, 6, 10 300

SDG 23 Rolled Cut GB/T 5-1/2OD(5.6mm), 6-1/2OD(6.3mm) 300

21835
 SDG 23 Rolled 10 6x4 300

SDG 23 Rolled Cut 40 6x4 300

SDG 23 Rolled ASME 16 300

B36.10M-10

SDG 23 Rolled, ASME 16 300

Cut B36.10M-40

SDG 23 Rolled, cut EN 10255 H 76.1mm(4.5mm) 300

Flange adapter

Rated Pressure
Model Groove Type Pipe Size (in.) (psig)

SDG 15 Rolled 10 2, 2-1/2, 3, 4, 5, 6, 8 300

SDG 15 Rolled 1387-10 3OD, 6-1/2 OD 300

SDG 15 Rolled 10 10, 12 225

SDG 15 Rolled, Cut 40 2, 2-1/2, 3, 4, 5, 6, 8 300

SDG 15 Rolled, Cut 1387-40 3OD, 6-1/2 OD 300

SDG 15 Rolled, Cut 40 10, 12 225

SDG 15 Rolled, Cut 4200 48.3 / 4.0mm, 108.0 / 3.6mm 300

SDG 15 Rolled, Cut 4200 133.0 / 3.2mm, 139.7 / 3.6mm, 159.0 / 4.5mm 225

SDG 15 Rolled ASME 14 300

B36.10M-10

SDG 15 Rolled, Cut ASME 14 300

B36.10M-40

SDG 15D Rolled 10 2, 2-1/2, 3, 4 300

SDG 15D Rolled 10 5 250

SDG 15D Rolled, cut 40 5 250

SDG 15D Rolled ASME 14 300

B36.10M-10

SDG 15D Rolled, Cut ASME 14 300

B36.10M-40

SDG 15D Rolled, Cut 4200 219.1 / 5.0mm, 273.0 / 6.3mm, 323.9 / 6.3mm 250

The fittings are suitable for use in dry pipe systems for temperatures to -40 F with the exception of Model SDG-24, SDG 15E

Model SDG 40, SDG 42 in the 1/2 in. and 3/4 in. nominal outlet sizes are intended for direct connection to sprinklers.

Models SDG 42, SDG 44. SDG 48, SDG 40, SDGL 44, SDGL 42, SDGL 40, SDGL 44V and SDGL 42V in the 1 in. and larger nominal outlet sizes
are intended for connection to system piping.

Models SDG 42, SDGL 42 with 2 in. and larger main run size and 1 in. nominal outlets are intended for direct connection to sprinklers.

Models SGDL40 and SDGL 42V in the 1/2, 3/4, 1 in. nominal outlets are intended for direct connection to sprinklers.

Suitable for use in dry pipe systems for temperatures to -40 F

10 refers to Schedule 10 steel pipe in accordance with NFPA 13.

40 refers to Schedule 40 steel pipe in accordance with NFPA 13.

1387-10 refers to BS 1387 Schedule 10 steel pipe

1387-40 refers to BS 1387 Schedule 40 steel pipe

1387-10 refers to BS 1387 Schedule 10 steel pipe

1387-40 refers to BS 1387 Schedule 40 steel pipe

T3091 refers to GB/T3091-2001 ordinary steel pipe

T3091-1993 refers to GB/T3091-1993 ordinary steel pipe

GB/T 3091 refers to GB/T3091 ordinary steel pipe

T17395 refers to GB/T17395-1998 steel ordinary pipe

GB/T 17395 refers to GB/T 17395 steel ordinary pipe

GB/T 21835 refers to GB/T 21835 ordinary steel pipe

6-1/2 OD pipe is GB/T3091-1993 pipe, 2-1/2", 4-1/4 OD, 5-1/4 OD, 5" and 6-1/4 OD pipes are GB/T17395-1998 pipes, the rest pipes are
GB/T3091-2001 pipes

5 refers to ASME B36.10-2004 ordinary steel pipe

WGalweld 7 refers to Wuppermann Stahl Gmbh, model WGalweld 7 (Galvanized) pipe, file number EX16421

JIS G3452 refers to JIS G3452-2014 ordinary steel pipe

Trademark and/or Tradename: "SD", , ,

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be Certified and
covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide Information,
Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner,
without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ with permission from UL Solutions" must
appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "©2023
UL LLC."
 Fittings, Grooved and Plain End

COMPANY

SHIELD FIRE SAFETY & SECURITY LTD

Unit 3, Endeavour Dr
Basildon, SS14 3WF United Kingdom

EX6657

Grooved

Rated
Pressure
Model Type Size In. (psig)

SDG 90 Degree Elbow 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4, 5, 5-1/2 OD, 6, 6-1/2 OD, 8 500
100

SDG 90 Degree Elbow 33.7mm, 76.1mm 500

100

SDG 90 Degree Elbow 133.0mm, 267.4mm, 318.5mm 300

100

SDG 90 Degree Elbow 14, 16, 18, 20, 24 300

100

SDG 90 Degree Elbow 10 500

100

SDG 90 Degree Elbow 12 500

100

SDG 90 Degree Elbow 114.3mm x 88.9mm x 33.7mm, 300

100H 165.1mm x 88.9mm x 33.7mm;

SDG 90 Degree Short 2, 2-1/2, 3 OD, 3, 4, 5-1/2 OD, 6, 6-1/2 OD, 8 300
105 Elbow

SDG 90 Degree Short 108.0 mm 500

105 Elbow

SDG 90 Degree Short 159.0 mm, 216.3 mm 300

105 Elbow
Feedback

SDG 90 Degree 88.9 x 76.1mm; 300

101R Reducing Elbow 114.3 x 76.1mm, 88.9mm;
165.1 x 114.3mm;
168.3 x 114.3mm

SDG 45 Degree Elbow 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4, 5-1/4OD, 5, 6, 6-1/2 OD, 8, 10, 12 500
200
SDG 45 Degree Elbow 33.7 mm 500
200

SDG 45 Degree Elbow 108.0mm, 139.7mm, 159.0mm, 216.3mm, 267.4mm, 318.5mm 300
200

SDG 45 Degree Elbow 14, 16, 18, 20, 24 300

200

SDG 12 Tee 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4, 5, 6, 6-1/2 OD, 8, 10, 12 500

SDG 12 Tee 33.7mm, 76.1mm 500

SDG 12 Tee 133.0mm, 139.7mm, 267.4mm 300

SDG 12 Tee 14, 16, 18, 20, 24 300

SDG 53 Reducing Tee 2 x 1-1/2; 500

3 x 1, 1-1/2, 2, 2-1/2;
4 x 1, 2, 2-1/2, 3; 5 x 1-1/2, 2, 2-1/2, 3, 4;
6 x 2, 2-1/2, 3, 4, 5;
8 x 2, 2-1/2, 3, 4, 5, 6

10 x 4

12 x 6

SDG 53 Reducing Tee 60.3 x 33.7mm, 48.3mm; 500

73.0 x 48.3mm, 60.3mm;
76.1 x 42.4mm, 48.3mm, 60.3mm;
88.9 x 42.4mm, 48.3mm, 60.3mm, 73.0mm

216.3 x 114.3mm

SDG 53 Reducing Tee 14 x 8, 14 x 10, 14 x 2 300

SDG 53 Reducing Tee 219.1 x 60.3mm, 76.1mm, 88.9mm, 108.0mm, 114.3mm, 133.0mm, 139.7mm, 300
141.3mm, 159.0mm, 165.1mm; 168.3mm;
273.0 x 165.1mm, 168.3mm, 219.1mm;
323.9 x 165.1mm, 219.1mm, 273.0mm88.9 x 76.1mm;
108.0 x 60.3mm, 73.0mm, 88.9mm;
114.3 x 48.3mm, 76.1mm;
133.0 x 60.3mm, 76.1mm, 108.0mm, 114.3mm;
139.7 x 48.3mm, 60.3mm, 76.1mm, 88.9mm, 114.3mm;
159.0 x 60.3mm, 76.1mm, 88.9mm, 108.0mm, 114.3mm, 133.0mm;
165.1 x 60.3mm, 76.1mm, 88.9mm, 114.3mm, 133.0mm, 139.7mm, 159.0mm;
168.3 x 76.1mm, 139.7mm;
216.3 x 165.1mm;

SDG 53 Reducing Tee 114.3 x 33.7mm, 60.3mm, 73.0mm, 88.9mm; 365

141.3 x 88.9mm, 114.3mm;

168.3 x 60.3mm, 73.0mm, 88.9mm, 114.3mm, 141.3mm

Feedback

SDG 53 Reducing Tee 10 x 4 500

SDG 53 Reducing Tee, 114.3mm x 88.9mm x 33.7mm, 300

A Grooved 165.1mm x 88.9mm x 33.7mm;

SDG 53 Reducing Tee, 114.3mm x 88.9mm x 33.7mm, 300

B Grooved 165.1mm x 88.9mm x 33.7mm;
SDG Short Tee 2, 2-1/2, 3 OD, 3, 4, 5-1/2 OD, 6, 6-1/2 OD, 8 300
102

SDG Short Tee 108.0 mm 500

102

SDG Short Tee 159.0 mm, 216.3 mm 300

102

SDG 12 Tee 88.9mm, 114.3mm, 168.3mm 300

TH

SDG 53 Reducing Tee 60.3 x 33.7mm, 48.3mm; 500

TH 73.0 x 33.7mm, 42.4mm;
76.1 x 33.7mm, 42.4mm, 48.3mm,
60.3mm;
88.9 x 33.7mm, 42.4mm, 48.3mm,
60.3mm, 76.1mm

SDG 53 Reducing Tee 108.0 x 60.3mm, 76.1mm, 88.9mm; 300

TH 114.3 x 33.7mm, 42.4mm, 48.3mm,
60.3mm, 76.1mm, 88.9mm;
133.0 x 60.3mm, 76.1mm, 88.9mm;
139.7 x 33.7mm, 42.4mm, 48.3mm,
60.3mm, 76.1mm, 88.9mm;
159.0 x 60.3mm, 76.1mm, 88.9mm;
165.1 x 33.7mm, 42.4mm, 48.3mm,
60.3mm, 76.1mm, 88.9mm, 114.3mm;
168.3 x 60.3mm, 76.1mm, 88.9mm

SDG 13 Cross 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4, 5, 6, 6-1/2 OD, 8, 10, 12 500

SDG 13 Cross 108.0 mm, 139.7 mm, 159.0 mm 300

SDG 13 Reducing Cross 88.9 x 60.3 mm 500

SDG 13 Reducing Cross 114.3 x 60.3 mm, 88.9 mm; 300

139.7 x 114.3 mm;
159.0 x 108.0 mm;
165.1 x 60.3 mm, 76.1 mm, 88.9 mm, 114.3 mm;
219.1 x 60.3 mm, 114.3 mm, 139.7 mm, 159.0 mm, 165.1 mm

SDG Reducing Cross 88.9 x 60.3mm 500

13R

SDG Reducing Cross 114.3 x 60.3mm, 88.9mm; 300

13R 139.7 x 114.3mm;
159.0 x 108.0mm;
165.1 x 60.3mm, 76.1mm, 88.9mm,
114.3mm;
219.1 x 60.3mm, 114.3mm, 139.7mm,
159.0mm, 165.1mm

SDG 13 Cross 114.3 x 33.7mm, 42.4mm, 48.3mm, 300

Feedback

RTH 60.3mm;
165.1 x 60.3mm
SDG 35 Grooved 12 x 6, 8, 102 x 3/4, 1, 1-1/4, 1-1/2; 500
Concentric 2-1/2 x 1, 1-1/4, 1-1/2, 2;
Reducer 3 x 3/4, 1, 1-1/2, 2, 2-1/2;
4 x 1, 1-1/2, 2, 2-1/2, 3;
5 x 3, 4;
6 x 1, 2, 2-1/2, 3, 4, 5;
8 x 2-1/2, 3, 4, 5, 610 x 6, 8;

SDG 35 Grooved 219.1 x 108mm42.4 x 33.7mm; 500

Concentric 48.3 x 33.7mm, 42.4mm;76.1 x 33.7mm, 42.4mm, 48.3mm, 60.3mm;
Reducer 88.9 x 76.1mm;
108.0 x 60.3mm, 73.0mm, 88.9mm141.3 x 76.1mm165.1 x 108mm;

SDG 35 Grooved 88.9 x 42.4mm; 365

Concentric 133.0 x 108.0mm, 114.3mm;
Reducer 139.7 x 60.3mm;
141.3 x 88.9mm, 114.3mm

SDG 35 Grooved 108.0 x 76.1mm; 300

Concentric 114.3 x 42.4mm, 76.1mm;
Reducer 139.7 x 76.1mm, 88.9mm, 114.3mm;
141.3 x 73.0mm;
159.0 x 60.3mm, 76.1mm, 88.9mm, 108.0mm, 114.3mm, 133.0 mm;
165.1 x 60.3mm, 76.1mm, 88.9mm, 114.3mm, 139.7mm;
168.3 x 76.1mm, 139.7mm;
216.3 x 114.3mm, 165.1mm;
219.1 x 108.0mm, 139.7mm, 159.0mm, 165.1mm;
273.0 x 159.0mm, 165.1mm

SDG 35 Grooved 14 x 8, 14 x 10, 14 x 12 300

Concentric
Reducer

SDG 37 Concentric 2 x 3/4, 1, 1-1/4, 1-1/2; 500

Reducer - FNPT 2-1/2 x 1, 1-1/4, 1-1/2, 2;
3 x 3/4, 1, 1-1/2, 2, 2-1/2;
4 x 1, 1-1/2, 2, 2-1/2, 3;
5 x 3, 4;
6 x 1, 2, 2-1/2, 3, 4, 5;
8 x 2-1/2, 3, 4, 5, 6

SDG 37 Concentric 76.1 x 21.3 mm, 26.9 mm, 33.7 mm, 42.4 mm, 48.3 mm, 60.3 mm 500
Reducer With
Female Thread

SDG 37 Concentric 88.9 x 42.4 mm, 76.1 mm; 300

Reducer With 108.0 x 33.7 mm, 42.4 mm, 48.3 mm, 60.3 mm, 76.1 mm, 88.9 mm;
Female Thread 114.3 x 21.3 mm, 26.9 mm, 42.4 mm, 76.1 mm;
159.0 x 26.9 mm, 33.7 mm, 42.4 mm, 48.3 mm, 60.3 mm, 88.9 mm, 114.3 mm;
165.1 x 21.3 mm, 26.9 mm, 33.7 mm, 42.4 mm, 48.3 mm, 60.3 mm, 76.1 mm, 88.9
mm, 114.3 mm;
219.1 x 48.3 mm, 60.3 mm, 76.1 mm

SDG 39 Concentric 2 x 3/4, 1, 1-1/4, 1-1/2; 500

Feedback

Reducer - MNPT 2-1/2 x 1, 1-1/4, 1-1/2, 2;

3 x 3/4, 1, 1-1/2, 2, 2-1/2;
4 x 1, 1-1/2, 2, 2-1/2, 3;
5 x 3, 4;
6 x 1, 2, 2-1/2, 3, 4, 5;
8 x 2-1/2, 3, 4, 5, 6
SDG 39 Concentric 76.1 x 60.3 mm 500
Reducer - MNPT

SDG 14 Cap 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4, 5, 5-1/2 OD, 6, 6-1/2 OD, 8, 10, 12 500

SDG 14 Cap 33.7mm 500

SDG 14 Cap 108.0mm, 133.0mm, 139.7mm, 159.0mm, 216.3mm 300

SDG 14 Cap 76.1 x 48.3mm 500

168.3 x 21.3mm, 60.3mm;

219.1 x 33.7mm

SDG 14 Cap 88.9 x 60.3mm; 365

114.3 x 60.3mm;

139.7 x 60.3mm;

165.1 x 60.3mm

SDG 14 Cap 88.9 x 21.3mm, 33.7mm, 48.3mm; 300

114.3 x 21.3mm, 33.7mm, 48.3mm;
165.1 x 21.3mm, 33.7mm;
168.3 x 48.3mm

SDG 14 Cap 14 300

SDG Cap 88.9 x 48.3mm, 60.3mm; 365

14A 114.3 x 48.3mm, 60.3mm;
139.7 x 48.3mm, 60.3mm;
165.1 x 48.3mm;
168.3 x 48.3mm, 60.3mm

SDG Cap 219.1 x 48.3mm, 60.3mm 300

14A

SDG Flange Adapter 2, 2-1/2, 3 OD, 3, 4, 5, 5-1/2 OD, 6, 6-1/2 OD, 8 300
16B

SDG Flange Adapter 10, 12 225

16B

SDG Flange Adapter 33.7mm, 42.4mm, 48.3mm, 60.3mm, 300

16B 73.0mm, 76.1mm, 88.9mm, 108.0mm,
114.3mm, 133.0mm, 139.7mm,
141.3mm, 159.0mm, 165.1mm,
168.3mm

SDG Flange Adapter 219.1mm, 273.1mm, 323.9mm 225

16B

SDG 16 Flange Adapter 108.0mm, 159.0mm 300

C
Feedback

SDG 16 Flange Adapter 219.1mm, 273.0mm 225

A

SDG 16 Flange Adapter 2, 2-1/2, 3 OD, 3, 4, 5, 6, 6-1/2 OD, 8 300

SDG 16 Flange Adapter 10, 12 225

SDG 16 Flange Adapter 33.7 mm, 42.4 mm, 48.3 mm, 108.0 mm, 133.0 mm, 159.0 mm 300
SDG 11.25 Degree 42.4 mm, 48.3 mm, 60.3 mm, 76.1 mm, 88.9 mm 500
112 Elbow

SDG 11.25 Degree 108.0 mm, 114.3 mm, 139.7 mm, 159.0 mm, 165.1 mm, 168.3 mm, 219.1 mm 300
112 Elbow

SDG 22.5 Degree 42.4 mm, 48.3 mm, 60.3 mm, 73.0 mm, 76.1 mm, 88.9 mm 500
225 Elbow

SDG 22.5 Degree 108.0 mm, 114.3 mm, 139.7 mm, 159.0 mm, 165.1 mm, 168.3 mm, 219.1 mm 300
225 Elbow

SDG 33 Grooved 88.9 x 60.3mm; 500

Eccentric 108.0 x 76.1mm, 88.9mm;
Reducer 114.3 x 60.3mm, 88.9mm

168.3 x 141.3mm;

219.1 x 159.0mm, 165.1mm, 168.3mm

SDG 33 Grooved 114.3 x 76.1mm; 300

Eccentric 139.7 x 114.3mm;
Reducer 159.0 x 108.0mm, 114.3mm;
165.1 x 88.9mm, 114.3mm, 139.7mm;
168.3 x 88.9mm, 114.3mm, 139.7mm;
219.1 x 114.3mm, 168.3mm;
273.1 x 219.1mm

SDG 33 Grooved Eccentric 14 x 8, 14 x 10, 14 x 12 300

Reducer

SDG 33 Grooved 108.0 x 76.1mm 500

TH Eccentric
Reducer With
FeMale Thread

SDG 33 Grooved 114.3 x 76.1mm; 300

TH Eccentric 139.7 x 88.9mm;
Reducer With 165.1 x 88.9mm
FeMale Thread

SDGL 90 Degree Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400
105

SDGL 90 Degree Elbow 5-1/4 OD, 5-1/2 OD, 5, 6-1/4 OD, 6-1/2 OD, 6, 216.3 mm, 8, 10, 12 300
105

SDGL 90 Degree Elbow 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400
100

SDGL 90 Degree Elbow 6-1/2 OD, 6, 8, 10, 12 300

100

SDGL 45 Degree Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400
200
Feedback

SDGL 45 Degree Elbow 5-1/4 OD, 5-1/2 OD, 5, 6-1/4 OD, 6-1/2 OD, 6, 216.3 mm, 8, 10, 12 300
200

SDGL 22.5 Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400
225
SDGL 22.5 Elbow 5-1/2 OD, 5, 6-1/4 OD, 6-1/2 OD, 6, 8, 10, 12 300
225

SDGL 11.25 Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400
112

SDGL 11.25 Elbow 5-1/2 OD, 5, 6-1/4 OD, 6-1/2 OD, 6, 8, 10, 12 300
112

SDGL Tee 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400

102

SDGL Tee 5-1/4 OD, 5-1/2 OD, 5, 6-1/4 OD, 6-1/2 OD, 6, 216.3 mm, 8, 10, 12 300
102

SDGL Tee 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400

12

SDGL Tee 5-1/2 OD, 6-1/4 OD, 6-1/2 OD, 6, 8, 10, 12 300
12

SDGL Reducing Tee 3 ODx2, 3x3 OD, 5x2, 5x3 OD, 5x3, 8x3 OD, 8x3, 8x5 232
53

SDGL Reducing Tee 2x1, 2x1-1/4, 2x1-1/2, 2-1/2x1, 2-1/2x1-1/4, 2-1/2x1-1/2, 2-1/2x2, 3 ODx1, 3 ODx1- 400
53 1/4, 3 ODx1-1/2, 3x1, 3x1-1/4, 3x1-1/2, 3x2, 3x2-1/2, 4x1, 4x1-1/4, 4x1-1/2, 4x2,
4x2-1/2, 4x3 OD, 4x3

SDGL Reducing Tee 5-1/2 ODx1, 5-1/2 ODx1-1/4, 5-1/2 ODx1-1/2, 5-1/2 ODx2, 5-1/2 ODx3 OD, 5-1/2 300
53 ODx3, 6-1/2 ODx1, 6-1/2 ODx1-1/4, 6-1/2 ODx1-1/2, 6-1/2 ODx2, 6-1/2 ODx3 OD,
6-1/2 ODx3, 6-1/2 ODx4, 6x1, 6x1-1/4, 6x1-1/2, 6x2, 6x3 OD, 6x3, 6x4, 8x4, 8x6-1/2
OD, 8x6, 10x6, 10x8, 12x4, 12x6, 12x8, 12x10

SDGL Reducing Tee 1-1/4x1, 1-1/2x1, 1-1/2x1-1/4, 3 ODx2, 3x3 OD, 4x3 OD, 5x1, 5x1-1/4, 5x1-1/2, 5x2, 232
53TH Threaded 5x3 OD

SDGL Reducing Tee 2x1, 2x1-1/4, 2x1-1/2, 3 ODx1, 3 ODx1-1/4, 3 ODx1-1/2, 3x1, 3x1-1/4, 3x1-1/2, 3x2, 300
53TH Threaded 4x1, 4x1-1/4, 4x1-1/2, 4x2, 4x3 OD, 4x3, 5-1/2 ODx1, 5-1/2 ODx1-1/4, 5-1/2 ODx1-
1/2, 5-1/2 ODx2, 5-1/2 ODx3 OD, 5-1/2 ODx3, 6-1/2 ODx1, 6-1/2 ODx1-1/4, 6-1/2
ODx1-1/2, 6-1/2 ODx2, 6-1/2 ODx3 OD, 6-1/2 ODx3, 6-1/2 ODx4, 6x1, 6x1-1/4,
6x1-1/2, 6x2, 6x3 OD, 6x3, 6x4

SDGL Reducing Tee 2-1/2x1, 2-1/2x1-1/4, 2-1/2x1-1/2, 2-1/2x2 400

53TH Threaded

SDGL Cross 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400

13

SDGL Cross 5-1/4 OD, 5-1/2 OD, 5, 6-1/4 OD, 6-1/2 OD, 6, 8, 10, 12 300
13

SDGL Cap 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4 400

14

SDGL Cap 5-1/4 OD, 5-1/2 OD, 5, 6-1/4 OD, 6-1/2 OD, 6, 8, 10, 12 300
Feedback

14

SDGL Cap 4x1, 6-1/2 ODx1, 6x1, 8x1, 10x1 300

14TH

SDGL Concentric 1-1/2x1-1/4, 3x3 OD, 5x2, 5x3 OD, 5x4, 6-1/2 ODx5, 8x5, 8x6-1/2 OD 232
35 Reducer Grooved
Outlet
SDGL Concentric 1-1/4x1, 1-1/2x1, 2x1, 2x1-1/4, 2x1-1/2, 2-1/2x1-1/4, 2-1/2x1-1/2, 2-1/2x2, 3 ODx1, 400
35 Reducer Grooved 3 ODx1-1/4, 3 ODx1-1/2, 3 ODx2, 3x1-1/4, 3x1-1/2, 3x2, 3x2-1/2, 3x3 OD, 4x1-1/4,
Outlet 4x1-1/2, 4x2, 4 x 2-1/2, 4x3 OD, 4x3

SDGL Concentric 5-1/2 ODx1-1/4, 5-1/2 ODx1-1/2, 5-1/2 ODx2, 5-1/2 ODx3 OD, 5-1/2 ODx3, 5-1/2 300
35 Reducer Grooved ODx4, 6-1/2 ODx2, 6-1/2 ODx3 OD, 6-1/2 ODx3, 6-1/2 ODx4, 6x2, 6x2-1/2, 6x3 OD,
Outlet 6x3, 6x4, 6x5-1/2 OD, 8x2, 8x2-1/2, 8x3 OD, 8x3, 8x4, 8x5-1/2 OD, 8x6, 10x4, 10x6,
10x8

SDGL Concentric 1-1/2x1, 3x3 OD, 5x1, 5x1-1/4, 5x2, 5x3 OD 232
37 Reducer
Threaded Outlet

SDGL Concentric 2x1, 2x1-1/4, 2x1-1/2, 3 ODx1, 3 ODx1-1/4, 3 ODx1-1/2, 3 ODx2, 3x1, 3x1-1/4, 3x1- 300
37 Reducer 1/2, 3x2, 4x1, 4x1-1/4, 4x1-1/2, 4x2, 4x3 OD, 4x3, 5-1/2 ODx1, 5-1/2 ODx1-1/4, 5-
Threaded Outlet 1/2 ODx1-1/2, 5-1/2 ODx2, 5-1/2 ODx3 OD, 5-1/2 ODx3, 6-1/2 ODx1, 6-1/2 ODx1-
1/4, 6-1/2 ODx1-1/2, 6-1/2 ODx2, 6-1/2 ODx3 OD, 6-1/2 ODx3, 6-1/2 ODx4, 6x1,
6x1-1/4, 6x1-1/2, 6x2, 6x3 OD, 6x3, 6x4, 8x1, 8x1-1/4, 8x1-1/2, 8x2, 8x3 OD, 8x3, 8x4

SDGL Concentric 2-1/2x1, 2-1/2x1-1/4, 2-1/2x1-1/2, 2-1/2x2 400

37 Reducer
Threaded Outlet

SDGL Eccentric 3x2, 3x2-1/2, 3x3 OD, 4x2, 4x2-1/2, 4x3 OD, 4x3 400
33 Reducer

SDGL Eccentric 5-1/2 ODx3 OD, 5-1/2 ODx3, 5-1/2 ODx4, 6-1/4 ODx2, 6-1/4 ODx3 OD, 6-1/4 300
33 Reducer ODx3, 6-1/4 ODx4-1/4 OD, 6-1/4 ODx4, 6-1/2 ODx3 OD, 6-1/2 ODx3, 6-1/2 ODx4,
6-1/2 ODx5-1/2 OD, 6x3, 6x4, 6x5-1/2 OD, 8x3, 8x4, 8x5-1/2 OD, 8x6-1/2 OD, 8x6,
10x6-1/2 OD, 10x6, 10x8

SDGL Flange Adaptor, 2, 2-1/2, 3 OD, 3, 4-1/4 OD, 4, 5-1/4 OD, 5-1/2 OD, 5, 6-1/4 OD, 6-1/2 OD, 6, 8, 10, 300
16B Grooved 12

SDGL Flange Adaptor, 2, 3 OD, 3, 4 300

15TH Threaded

SDGL Adapter Elbow 1-1/4x1/2, 1-1/4x3/4, 1-1/4x1, 1-1/2x1/2, 1-1/2x3/4, 1-1/2x1, 2x1/2, 2x3/4, 2x1, 2- 500
114 1/2x1/2, 2-1/2x3/4, 2-1/2x1

SDGL Adapter Nipple 1-1/2, 2 500

11

SDGL Reducing 1-1/2x1, 2x1-1/2 500

111 Adapter Nipple

SDGL Drain Cap 2x1, 2x1-1/2, 2-1/2x1, 3 ODx1-1/2, 3 ODx 2, 3x1, 3x1-1/2, 3x2, 4x1, 4x1-1/2, 4x2, 5- 300
14A 1/2 ODx2, 6x1, 6x2, 8x2

SDGL Flange Adapter 2, 2-1/2, 3, 4, 5, 6, 8, 10, 12 300

16D

SDG 90 Degree 88.9 x 76.1mm; 300

101 Reducing Elbow
Feedback

114.3 x 76.1mm, 88.9mm;

165.1 x 114.3mm;

168.3 x 114.3mm

SDG 90 Degree 4x3 500

101 Reducing Elbow
 SDG 90 Degree 1-1/4 x 1/2, 3/4, 1; 500
114 Reducing Elbow

1-1/2 x 1/2, 3/4, 1;

2 x 1/2, 3/4, 1;

2-1/2 x 1/2, 3/4, 1;

3 x 3/4, 1

SDG Cross 114.3 x 33.7mm, 42.4mm, 48.3mm, 60.3mm; 300

13RTH

165.1 x 60.3mm

SDG Reducing Cross, 3OD x 2; 500

13RTH Threaded

3 x 1-1/2, 2;

4 x 3OD, 3;

6-1/2OD x 1-1/2

SDG Flange Adapter 2, 4, 8, 10, 14, 16, 18, 20, 24 300

16D

SDG Flange Adapter 159.0mm 300

16C

SDG Flange Adapter 14, 16 300

16C

SDG Flange Adapter 4-1/4OD(108mm), 4, 6-1/2OD(165.1mm), 8 365

16C

Trademark and/or Tradename: "SHIELD", , , ,

Last Updated on 2022-09-01

The appearance of a company's name or product in this database does not in itself assure that products so identified have been
manufactured under UL Solutions' Follow - Up Service. Only those products bearing the UL Mark should be considered to be Certified and
covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide Information,
Assemblies, Constructions, Designs, Systems, and/or Certifications (files) must be presented in their entirety and in a non-misleading manner,
without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product iQ with permission from UL Solutions" must
appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "©2023
UL LLC."
Feedback
Pipes/Fittings/Couplings | Aboveground Pipe and Fittings | Pipe Fittings

Pipe Fittings
Product Description

Product Fitting Nominal Pipe Max Working Remarks

Designation Description Size, in. Pressure, psi (kPa)
SDGL 105 90° Elbow 76.1, 139.7, 165.1 mm 232 (1600) c
SDGL 105 90° Elbow 8, 10, 12 300 (2070) c
SDGL 105 90° Elbow 5, 6 400 (2760) c
133, 139.7, 159, 165.1 mm
SDGL 105 90° Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 500 (3445) c
76.1, 108 mm
SDGL 200 45° Elbow 8, 10, 12 300 (2070) c
SDGL 200 45° Elbow 5, 6 400 (2760) c
133, 139.7, 159, 165.1 mm
SDGL 200 45° Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 500 (3445) c
76.1 mm, 108 mm
SDGL 102 Equal Tee 8, 10, 12 300 (2070) c
SDGL 102 Equal Tee 5, 6 400 (2760) c
133, 139.7, 159, 165.1 mm
SDGL 102 Equal Tee 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 500 (3445) c
76.1 mm, 108 mm
SDGL 53 Reducing Tee, 3 x 76.1 mm 232 (1600) c
Grooved 139.7 mm x 4
165.1 mm x 139.7 mm
SDGL 53 Reducing Tee, 8 x 4, 6 300 (2070) c
Grooved 219.1 mm x 165.1 mm
10 x 6, 8
12 x 4, 6, 8, 10
SDGL 53 Reducing Tee, 2-1/2 x 1, 1-1/4, 1-1/2, 2 400 (2760) c
Grooved 3 x 2-1/2
4 x 2-1/2
6 x 1, 1-1/4, 1-1/2, 2, 3, 4, 76.1 mm
139.7 mm x 1, 1-1/4, 1-1/2, 2, 3, 76.1 mm
165.1 mm x 1, 1-1/4, 1-1/2, 2, 3, 4, 76.1 mm
SDGL 53 Reducing Tee, 2 x 1, 1-1/4, 1-1/2 500 (3445) c
Grooved 3 x 1, 1-1/4, 1-1/2, 2
4 x 1, 1-1/4, 1-1/2, 2, 3, 76.1 mm
76.1 mm x 1, 1-1/4, 1-1/2
SDGL 53TH Reducing Tee, 2-1/2 x 1, 1-1/4, 1-1/2, 2 400 (2760) c, d
Grooved x 6 x 1, 1-1/4, 1-1/2, 2, 3, 4, 76.1 mm
Threaded 139.7 mm x 1, 1-1/4, 1-1/2, 2, 3, 76.1 mm
165.1 mm x 1, 1-1/4, 1-1/2, 2, 3, 4, 76.1 mm
SDGL 53TH Reducing Tee, 2 x 1, 1-1/4, 1-1/2 500 (3445) c, d
Grooved x 3 x 1, 1-1/4, 1-1/2, 2
Threaded 4 x 1, 1-1/4, 1-1/2, 2, 3, 76.1 mm
76.1 mm x 1, 1-1/4, 1-1/2
SDGL 16B Flange Adaptor 2, 2-1/2, 3, 4, 5, 6, 8, 10, 12 300 (2070) c, e
76.1, 108, 133, 139.7, 159, 165.1 mm
SDGL 15TH Flange Adaptor 2, 3, 4 300 (2070) c, e
Threaded 76.1 mm
SDGL 14 Cap 8, 10, 12 300 (2070) c
SDGL 14 Cap 5, 6 400 (2760) c
133, 139.7, 159, 165.1 mm
SDGL 14 Cap 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 500 (3445) c
76.1, 108 mm
SDGL 13 Equal Cross 8, 10, 12 300 (2070) c
SDGL 13 Equal Cross 5, 6 400 (2760) c
133, 139.7, 159, 165.1 mm
SDGL 13 Equal Cross 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 500 (3445) c
76.1, 108 mm
SDGL 37 Concentric 8 x 1, 1-1/4, 1-1/2, 2, 3, 4, 76.1 mm 300 (2070) c, d
Reducer,
Threaded
SDGL 37 Concentric 2-1/2 x 1, 1-1/4, 1-1/2, 2 400 (2760) c, d
Reducer, 6 x 1, 1-1/4, 1-1/2, 2, 3, 4, 76.1 mm
Threaded 139.7 mm x 1-1/4, 1-1/2, 2, 3, 76.1 mm
165.1 mm x 1-1/4, 1-1/2, 2, 3, 4, 76.1 mm
SDGL 37 Concentric 2 x 1, 1-1/4, 1-1/2 500 (3445) c, d
Reducer, 3 x 1, 1-1/4, 1-1/2, 2
Threaded 4 x 1, 1-1/4, 1-1/2, 2, 3, 76.1 mm
76.1 mm x 1, 1-1/4, 1-1/2, 2
139.7 mm x 1
SDGL 35 Concentric 76.1 mm x 2 232 (1600) c
Reducer, 3 x 2, 76.1 mm
Grooved 4 x 76.1 mm, 3
139.7 mm x 76.1 mm, 3, 4
165.1 mm x 76.1 mm, 3, 4, 139.7 mm
8 x 76.1 mm, 3, 4, 139.7 mm, 165.1 mm
10 x 4, 165.1 mm, 8
12 x 4, 139.7 mm, 165.1 mm, 8, 10
SDGL 35 Concentric 6 x 2-1/2 300 (2070) a, c
Reducer, 8 x 2, 2-1/2, 76.1 mm, 3, 6
Grooved 10 x 4, 6, 8
SDGL 35 Concentric 2-1/2 x 1-1/4, 1-1/2, 2 400 (2760) a, c
Reducer, 3 x 2-1/2, 76.1 mm
Grooved 4 x 2-1/2
6 x 2, 3, 4, 76.1 mm
139.7 mm x 1-1/4, 1-1/2, 2, 3, 76.1 mm
165.1 mm x 2, 3, 4, 76.1 mm
 SDGL 35 Concentric 2 x 1, 1-1/4, 1-1/2 500 (3445) a, c
Reducer, 3 x 1-1/4, 1-1/2, 2
Grooved 4 x 1-1/4, 1-1/2, 2, 3, 76.1 mm
76.1 mm x 1-1/4, 1-1/2
SDGL 114 Adapter Elbow 1-1/4 x 1/2, 3/4, 1 500 (3445) c, d
1-1/2 x 1/2, 3/4, 1
2 x 1/2, 3/4, 1
2-1/2 x 1/2, 3/4, 1
SDGL 11 Adapter Nipple 1-1/2 500 (3445) c, d
2
SDGL 111 Reducing Adapter Nipple 1-1/2 x 1 500 (3445) c, d
2 x 1-1/2
SDGL 14A Concentric Drain 2x1 500 (3445) c, d
End Cap 2-1/2 x 1
3x1
4x1
6x1
SDGL 225 22.5 Degree Grooved Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 400 (2760) c
76.1, 108 mm
SDGL 225 22.5 Degree Grooved Elbow 5, 6, 8, 10, 12 300 (2070) c
133, 139.7, 159, 165.1 mm
SDGL 112 11.25 Degree Grooved Elbow 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 400 (2760) c
76.1, 108 mm
SDGL 112 11.25 Degree Grooved Elbow 5, 6, 8, 10, 12 300 (2070) c
133, 139.7, 159, 165.1 mm
SDGL 33 Eccentric Reducer 3 x 2, 2-1/2, 76.1 mm 300 (2070) c
4 x 2, 2-1/2, 76.1 mm, 3
139.7 mm x 76.1 mm, 3, 4
159 mm x 76.1 mm, 3, 108 mm, 4
165.1 mm x 76.1 mm, 3, 4, 139.7 mm
6 x 3, 4, 139.7 mm
8 x 3, 4, 139.7 mm, 165.1 mm, 6
10 x 165.1 mm, 6, 8
SDGL 16D Flange Adapter 2, 2-1/2, 3, 4, 5, 6, 8 300 (2070) c, f
Remarks:
a. Min schedule cut groove pipe to be joined: Schedule 40.
c. Product is marked with acceptable trade name of "SHIELD"
d. Available with NPT threaded End Connections
e. Available with GB/T 9112 Flanges
f. Available with ANSI B16.5 Class 150 Flanges

Max Working
Product Fitting Nominal Pipe
Pressure, psi
Designation Description size, mm
(kPa)

Model SDG100 90° Elbow, Grooved Ends 1 ⁄ , 1 ⁄ , 2, 2 ⁄ , 500

3, 4, 5, 6, 8 (3450)
Model SDG200 45° Elbow, Grooved Ends 1 ⁄ , 1 ⁄ , 2, 2 ⁄ , 3, 500
4, 5, 6, 8, 10, 12 (3450)
Model SDG200 45° Elbow, Grooved Ends 76.1, 165 mm 500
(3450)
Model SDG12 Equal Tee, Grooved Ends 1 ⁄ , 1 ⁄ , 2, 2 ⁄ , 3, 500
4, 5, 6, 8, 10, 12 (3450)
Model SDG12 Equal Tee, Grooved Ends 76.1, 165 mm 500
(3450)
Model SDG53 Reducing Tee, Grooved Ends 2x1 ⁄ , 500
3 x 1, 1 ⁄ , 2, 2 ⁄ , (3450)
4 x 1, 2, 2 ⁄ , 3,
5 x 2, 3, 4,
6 x 2, 2 ⁄ , 3, 4, 5,
8 x 2, 3, 4, 5, 6
Model SDG13 Equal Cross, Grooved Ends 1 ⁄ , 1 ⁄ , 2, 2 ⁄ , 3, 500
4, 5, 6, 8, 10, 12 (3450)
Model SDG13 Equal Cross, Grooved Ends 76.1, 165 mm 500
(3450)
Model SDG35 Concentric Reducer, Grooved Ends 2 x ⁄ , 1, 1 ⁄ , 1 ⁄ , 500
2 ⁄ x 1, 1 ⁄ , 1 ⁄ , 2, (3450)
3 x ⁄ , 1, 1 ⁄ , 2, 2 ⁄ ,
4 x 1, 1 ⁄ , 2, 2 ⁄ , 3,
5 x 3, 4,
6 x 1, 2, 2 ⁄ , 3, 4, 5,
8 x 2 ⁄ , 3, 4, 5, 6
Model SDG37 Concentric Reducer, Groove x Female NPT 2 x ⁄ , 1, 1 ⁄ , 1 ⁄ , 500
2 ⁄ x 1, 1 ⁄ , 1 ⁄ , 2, (3450)
3 x ⁄ , 1, 1 ⁄ , 2, 2 ⁄ ,
4 x 1, 1 ⁄ , 2, 2 ⁄ , 3,
5 x 3, 4,
6 x 2, 2 ⁄ , 3, 4, 5,
8 x 2 ⁄ , 3, 4, 5, 6
Model SDG39 Concentric Reducer, Groove x Male NPT 2 x ⁄ , 1, 1 ⁄ , 1 ⁄ , 500
2 ⁄ x 1, 1 ⁄ , 1 ⁄ , 2, (3450)
3 x ⁄ , 1, 1 ⁄ , 2, 2 ⁄ ,
4 x 1, 1 ⁄ , 2, 2 ⁄ , 3,
5 x 3, 4,
6 x 2, 2 ⁄ , 3, 4, 5,
8 x 2 ⁄ , 3, 4, 5, 6
Model SDG14 Grooved End Cap 1 ⁄ , 1 ⁄ , 2, 2 ⁄ , 3, 4, 5, 500
6, 8, 10, 12 (3450)
Model SDG14 Grooved End Cap 76.1, 165 mm 500
(3450)
Model SDG16 Flange x Groove Adapter 2, 2 ⁄ , 3, 4, 5, 6, 8 500
(3450)
Model SDG16 Flange x Groove Adapter 76.1, 165mm 500
(3450)
Model SDT14 D.I. Cap, Threaded ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2, 2 ⁄ 500
(3450)
Model SDT22 D.I. Straight Coupling, Threaded ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2, 2 ⁄ 500
(3450)
Model SDT100 D.I. 90° Elbow, Threaded ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2, 2 ⁄ 500
(3450)
Model SDT200 D.I. 45° Elbow, Threaded ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2, 2 ⁄ 500
(3450)
Model SDT57 D.I. Bushings, Threaded 1x ⁄ , ⁄ 500
1 ⁄ x ⁄ (3450)
2x1
Model SDT30 D.I. Concentric Reducer, Threaded 1x ⁄ , ⁄ 500
1 ⁄ x ⁄ (3450)
2x1
Model SDT101 D.I. 90° Reducing Elbow, Threaded ⁄ x ⁄ 500
1x ⁄ , ⁄ (3450)
1 ⁄ x ⁄ , ⁄ ,1
1 ⁄ x ⁄ , 1, 1 ⁄
2 x ⁄ , 1, 1 ⁄ , 1 ⁄
2 ⁄ x1 ⁄ ,2
Model SDT53 Reducing Tee, ⁄ x ⁄ x ⁄ ,1 500
Threaded ⁄ x ⁄ x ⁄, ⁄ (3450)
1x1x ⁄ , ⁄ ,1 ⁄ ,1 ⁄
1x ⁄ x ⁄ ,1
1x ⁄ x1
1 ⁄ x1 ⁄ x ⁄ , ⁄ , 1, 1 ⁄ ,
2
1 ⁄ x 1 x ⁄ , ⁄ , 1, 1 ⁄ , 1
⁄
1 ⁄ x ⁄ x1 ⁄
1 ⁄ x ⁄ x1 ⁄
1 ⁄ x 1 ⁄ x ⁄ , ⁄ , 1, 1, 1
⁄ ,2
1 ⁄ x 1 ⁄ x ⁄ , ⁄ , 1, 1 ⁄ ,
1 ⁄
1 ⁄ x 1 x ⁄ , ⁄ , 1, 1 ⁄ , 1
⁄
1 ⁄ x ⁄ x1 ⁄ ,1 ⁄
1 ⁄ x ⁄ x1 ⁄ ,1 ⁄
2 x 2 x ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ ,
2 ⁄
2 x 1 ⁄ x ⁄ , ⁄ , 1, 1 ⁄ , 1
⁄ ,2
2x1 ⁄ x2
2x1x2
2 ⁄ x 2 ⁄ x ⁄ , 1, 1 ⁄ , 1
⁄ , 2, 3
Model SDT51 D.I. Reducing Cross, Threaded 1 ⁄ x 1, 1 ⁄ x 1, 2 x 1 500
(3450)
Model SDT55 D.I. Square Head Pipe Plug ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2 500
(3450)
Model SDT12 D.I. Equal Tee, Threaded ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2, 2 ⁄ 500
(3450)
Model SDT59 D.I. Union, Threaded 1, 1 ⁄ , 1 ⁄ , 2 500
(3450)
Model SDT13 D.I. Cross, Threaded 1, 1 ⁄ , 1 ⁄ , 2 500
(3450)
Model SDC100 C.I. 90° Elbow, Threaded ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2, 2 ⁄ 300
(2070)
Model SDC200 C.I. 45° Elbow, Threaded ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2, 2 ⁄ 300
(2070)
Model SDC30 C.I. Concentric Reducer, Threaded 1x ⁄ , ⁄ 300
2x1 (2070)
Model SDC101 C.I. 90° Reducing Elbow, Threaded 1x ⁄ , ⁄ , 300
1 ⁄ x ⁄ , ⁄ , 1, (2070)
1 ⁄ x ⁄ , ⁄ , 1, 1 ⁄ ,
2 x ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ ,
2 ⁄ x ⁄ , 1, 1 ⁄ , 1 ⁄ , 2
Model SDC53 C.I. Reducing Tee, Threaded 1 x ⁄ x ⁄ , ⁄ , 1, 300
1 x ⁄ x ⁄ , ⁄ , 1, (2070)
1x1x ⁄ , ⁄ ,1 ⁄ ,
1 x 1 ⁄ x 1,
1 ⁄ x 1 ⁄ x ⁄ , ⁄ , 1, 1 ⁄ ,
2,
1 ⁄ x 1 x ⁄ , ⁄ , 1, 1 ⁄ , 1
⁄ ,,
1 ⁄ x ⁄ x1 ⁄ ,
1 ⁄ x ⁄ x1 ⁄ ,
1 ⁄ x 1 ⁄ x ⁄ , ⁄ , 1, 1, 1
⁄ , 2,
1 ⁄ x 1 ⁄ x ⁄ , ⁄ , 1, 1 ⁄ ,
1 ⁄,
1 ⁄ x 1 x ⁄ , ⁄ , 1, 1 ⁄ , 1
⁄ , 2,
1 ⁄ x ⁄ x1 ⁄ ,1 ⁄ ,
1 ⁄ x ⁄ x1 ⁄ ,1 ⁄ ,
2 x 2 x ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ ,
2 x 1 ⁄ x ⁄ , ⁄ , 1, 1 ⁄ , 1
⁄ , 2,
2 x 1 ⁄ x ⁄ , 1, 1 ⁄ , 1 ⁄ ,
2,
2 x 1 x ⁄ , 1, 1 ⁄ , 2,
2x2x2 ⁄ ,
2 ⁄ x 2 x ⁄ , ⁄ , 1, 1 ⁄ , 1
⁄ , 2, 2 ⁄ ,
2x1 ⁄ x2 ⁄ ,
2x1x2 ⁄ ,
2x ⁄ x2 ⁄ ,
2 ⁄ x ⁄ x 2, 2 ⁄
 Model SDC12 C.I. Equal Tee, Threaded ⁄ , ⁄ , 1, 1 ⁄ , 1 ⁄ , 2 300
(2070)

SD-UFLEX and SD-VFLEX Expansion Loops

Rated Working Remarks /
Product Fitting Nominal Pipe
Pressure, Movement,
Designation Description Size, in.
psi (kPa) inches

SD-UFLEX Type 1, Welded Ends, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 175 (1205) d/

Expansion Loop 180° Return (25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250 (1725) ±1-1/2, ±4,
250 mm) ±8
SD-UFLEX Type 2, Flanged Ends, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 175 (1205) c, f /
Expansion Loop 180° Return (25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250 (1725) ±1-1/2, ±4
250 mm)
SD-UFLEX Type 3, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 175 (1205) c, f /
Expansion Loop Swivel Flanged Ends, (25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250 (1725) ±1-1/2, ±4,
180° Return 250 mm) ±8
SD-UFLEX Type 4, Threaded Ends, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6 175 (1205) g/
Expansion Loop 180° Return (25, 32, 40, 50, 65, 80, 100, 125, 150 mm) 250 (1725) ±1-1/2, ±4,
±8
SD-UFLEX Type 5, Sweat Ends, 1, 1-1/4, 1-1/2, 2 175 (1205) ± 1-1/2, ±4
Expansion Loop 180° Return (25, 32, 40, 50) 250 (1725)
SD-UFLEX Type 6, Sweat Ends, 1, 1-1/4, 1-1/2, 2 175 (1205) ± 1-1/2, ±4
Expansion Loop With intermediate pipe (25, 32, 40, 50) 250 (1725)
SD-UFLEX Type 7, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 175 (1205) a, b, e /
Expansion Loop Cut Groove Ends, (25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250 (1725) ±1-1/2, ±4,
180° Return 250 mm) ±8
SD-VFLEX Type 7, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 175 (1205) a, b, e /
Expansion Loop Cut Groove Ends, (25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250 (1725) ±1-1/2, ±4,
180° Return 250 mm) ±8
SD-VFLEX Type 4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6 175 (1205) g/
Expansion Loop Threaded Ends, (25, 32, 40, 50, 65, 80, 100, 125, 150 mm) 250 (1725) ±1-1/2, ±4,
180° Return ±8
SD-VFLEX Type 3, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 175 (1205) c, f /
Expansion Loop Swivel Flange Ends, (25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250 (1725) ±1-1/2, ±4,
180° Return 250 mm) ±8
SD-VFLEX Type 1, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8, 10 175 (1205) d/
Expansion Loop Welded Ends, (25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250 (1725) ±1-1/2, ±4,
180° Return 250 mm) ±8
Remarks:
a. Min schedule cut groove pipe to be joined: 4 in. or smaller - Schedule 40.
b. Min schedule rolled groove pipe to be joined: 4 in. or smaller - Schedule 10.
c. ANSI Flange
d. Welded
e. Cut Groove
f. EN Flange
g. Threads according to EN 10226 speci cations
 Product Fitting End Nominal Pipe Max Working Remarks
Designation Description Connection Size, in. Pressure, psi
(kPa)
SDG 100 90° Elbow Grooved 1-1/4, 1-1/2, 2, 2- 500 a
1/2, 3, 4, 5, 6, 8, (3450)
10, 12
76, 139.7, 165 500 a
mm (3445)
1 500 b
76, 133 mm (3445)
267.4, 318.5 mm 300 b
(2070)
SDT 100 90° Elbow NPT 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
5, 6 300 a
(2070)
BSP 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
5, 6 300 a
(2070)
SDT 101 90° Reducing NPT 1/2 x 1/4, 3/8 500 a
Elbow 3/4 x 1/4, 3/8, (3445)
1/2
1 x 1/4 x 3/8,
1/2, 3/4
1-1/4 x 3/8, 1/2,
3/4, 1
1-1/2 x 1/2, 3/4,
1, 1-1/4
2 x 1/2, 3/4, 1, 1-
1/4, 1-1/2
2-1/2 x 1/2, 3/4,
1, 1-1/4, 1-1/2, 2
3 x 1/2, 3/4, 1, 1-
1/4, 1-1/2, 2, 2-
1/2
4 x 1/2, 3/4, 1, 1-
1/4, 1-1/2, 2, 2-
1/2, 3
BSP 1/2 x 1/4, 3/8 500 a
3/4 x 1/4, 3/8, (3445)
1/2
1 x 1/4 x 3/8,
1/2, 3/4
1-1/4 x 3/8, 1/2,
3/4, 1
1-1/2 x 1/2, 3/4,
1, 1-1/4
2 x 1/2, 3/4, 1, 1-
1/4, 1-1/2
2-1/2 x 1/2, 3/4,
1, 1-1/4, 1-1/2, 2
3 x 1/2, 3/4, 1, 1-
1/4, 1-1/2, 2, 2-
1/2
4 x 1/2, 3/4, 1, 1-
1/4, 1-1/2, 2, 2-
1/2, 3
6x4 300 a
(2070)
SDG 101 90° Reducing Grooved 6x4 500 b
Elbow 88.9 x 76.1 mm (3445)
114.3 x 76.1 mm
165.1 x 114.3
mm
SDG 105 90° Short Grooved 2, 2-1/2, 3, 4, 6, 8 300 a
Radius Elbow 76, 139.1, (2070)
165mm
108, 159, 216.3 300 b
mm (2070)
114, 165 mm 365 b
(2510)
SDT 110 90° Street Elbow NPT 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2 (3445)
2-1/2, 3, 4
6 300 a
(2070)
BSP 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2 (3445)
2-1/2, 3, 4
6 300 a
(2070)
SDT 103 90° Reducing BSP 3/4 x 1/2 500 a
Street Elbow 1 x 3/4 (3445)
SDG 112 11.25° Elbow Grooved 1-1/4, 1-1/2, 2, 500 b
3, 4, 6 (3445)
76.1, 108, 139.7,
159, 165.1 mm
Grooved 8 300 b
(2070)
SDG 225 22.5° Elbow Grooved 1-1/4, 1-1/2, 2, 500 b
3, 4, 6 (3445)
73, 76.1, 108,
139.7, 159,
165.1 mm
Grooved 8 300 b
(2070)
SDG 200 45° Elbow Grooved 1-1/4, 1-1/2, 2, 2- 500 a
1/2, 3, 4, 5, 6, 8, (3450)
10, 12
76.1, 165 mm
1 500 a
108, 139.7, 159 (3450)
mm
216.3, 267.4, 300 b
318.5 mm (2070)
SDT 200 45° Elbow NPT 1/2, 3/4, 1, 1- 500 a
1/4, 1-12, 2 (3445)
2-1/2, 3, 4
5, 6 300 a
(2070)
BSP 1/2, 3/4, 1, 1- 500 a
1/4, 1-12, 2 (3445)
2-1/2, 3, 4
5, 6 300 a
(2070)
SDG 12 Equal Tee Grooved 1-1/4, 1-1/2,, 2, 500 a
2-1/2, 3, 4, 5, 6, (3450)
8, 10, 12
76/1. 165 mm
1 500 b
76, 133, 139.7 (3445)
mm
267.4 mm 300 b
(2070)
SDT 12 Equal Tee NPT 1/2, 3/4, 1, 1- 500 a
1/4, 1-12, 2 (3445)
2-1/2, 3, 4
5, 6 300 a
(2070)
BSP 1/2, 3/4, 1, 1- 500 a
1/4, 1-12, 2 (3445)
2-1/2, 3, 4
5, 6 300 a
(2070)
SDG 53 Reducing Tee Grooved 2 x 1-1/2 500 a
3 x 1, 1-1/2, 2, 2- (3450)
1/2
4 x 1, 2, 2-1/2, 3
5 x 2, 3, 4
6 x 2, 2-1/2, 3, 4,
5
8 x 2, 3, 4, 5, 6
2x1 500 b
2-1/2 x 1-1/2, 2 (3450)
3 x 1-1/4
4 x 1-1/2
60 x 48 mm
76.1 x 42.4,
48.3, 60.3 mm
88.9 x 48, 60,
73, 76.1 mm
108 x 60.3, 73,
88.9 mm
114.3 x 34, 60,
73, 76.1, 88.9
mm
133 x 60.3, 76.1,
108, 114.3 mm
139.7 x 48.3,
60.3, 76.1, 88.9,
114.3, 141 x
114.3 mm
141 x 114.3 mm
159 x 60.3, 76.1,
88.9, 114.3, 133
mm
168 x 60, 73, 89,
114, 141 mm
10 x 6, 8 300 b
12 x 8, 10 (2070)
165.1 x 60.3,
76.1, 88.9,
114.3, 133,
139.7, 159 mm
168.3 x 76.1,
139.7 mm
216.3 x 165.1
mm
219.1 x 60, 76.1,
89, 108, 114.3,
133, 139.7,
141.3, 159,
165.1, 168 mm
273 x 165.1 mm
323.9 x 165.1
mm
SDT 53 Reducing Tee NPT 1/2 x 1/2 x 1/4, 500 a
3/8 (3445)
1/2 x 1/4 x 1/2
1/2 x 3/8 x 1/2
3/4 x 3/4 x 1/4,
3/8, 1/2
3/4 x 1/2 x 1/2 x
3/4
1 x 1 x 1/4, 3/8,
1/2, 3/4
1 x 1/2 x 1/2,
3/4, 1
1 x 3/4 x 1/2,
3/4, 1
1-1/4 x 1/2 x
1/2, 3/4, 1, 1-1/4
1-1/4 x 3/4 x
3/4, 1, 1-1/4
1-1/4 x 1 x 1/2,
3/4, 1, 1-1/4, 1-
1/2
1-1/4 x 1-1/4 x
3/8, 1/2, 3/4, 1
1-1/2 x 1/2 x
3/4, 1-1/2
1-1/2 x 3/4 x
1/2, 3/4, 1, 1-
1/4, 1-1/2
1-1/2 x 1 x 1/2,
3/4, 1, 1-1/4, 1-
1/2
1-1/2 x 1-1/4 x
1/2, 3/4, 1, 1-
1/4, 1-1/2, 2
1-1/2 x 1-1/2 x
1/2, 3/4, 1, 1-1/4
2 x 1/2 x 2
2 x 3/4 x 2
2 x 1 x 1, 1-1/2, 2
2 x 1-1/4 x 1, 1-
1/4, 1-1/2, 2
2 x 1-1/2 x 1/2,
3/4, 1, 1-1/4, 1-
1/2, 2
2 x 2 x 1/2, 3/4,
1, 1-1/4, 1-1/2
2-1/2 x 1-1/2 x
2, 2-1/2
2-1/2 x 2 x 2, 2-
1/2
2-1/2 x 2-1/2 x
1/2, 3/4, 1, 1-
1/4, 1-1/2, 2
3 x 2 x 2, 3
3 x 3 x 1/2, 3/4,
1, 1-1/4, 1-1/2,
2, 2-1/2
4 x 4 x 1/2, 3/4,
1, 1-1/4, 1-1/2,
2, 2-1/2, 3
BSP 500 a
1/2 x 1/4, 3/8 (3445)
3/4 x 1/4, 3/8,
1/2
1 x 1/4, 3/8, 1/2,
3/4
1-1/4 x 3/8, 1/2,
3/4, 1
1-1/2 x 3/8, 1/2,
3/4, 1, 1-1/4
2 x 3/8, 1/2, 3/4,
1, 1-1/4, 1-1/2
2-1/2 x 3/4, 1/2,
1, 1-1/4, 1-1/2, 2
3 x 1/2, 3/4, 1, 1-
1/4, 1-1/2, 2, 2-
1/2
4 x 1/2, 3/4, 1, 1-
1/4, 1-1/2, 2, 2-
1/2, 3
1/2 x 1/2 x 3/4, 1
3/4 x 3/4 x 1, 1-
1/4
1 x 1 x 1-1/4 x 1-
1/2, 2, 2-1/2
1-1/4 x 1-1/4 x 1-
1/2, 2
1-1/2 x 1-1/2 x
2, 2-1/2
2 x 2 x 2-1/2
2-1/2 x 2-1/2 x
3, 4
3/4, 1 x 1/2 x 1/2
1-1/4, 1-1/2 x
3/4 x 3/4
1-1/4 x 1/2 x 1/2
1-1/4 , 1-1/2, 2 x
1x1
1-1/2, 2 x 1-1/4
x 1-1/4
2 x 1-1/2 x 1-1/2
2-1/2, 3 x 2 x 2
3/4 x 1/2 x 3/4
1 x 1/2 x 1, 1 x
3/4 x 1, 1 x 1/4 x
1
1-1/4 x 1/2 x 1-
1/4, 1-1/4, 1-1/4
x 3/4 x 1-1/4, 1-
1/4 x 1 x 1-1/4
1-1/2 x 1/2 x 1-
1/2, 1-1/2 x 3/4
x 1-1/2, 1-1/2 x
1 x 1-1/2, 1-1/2
x 1-1/4 x 1-1/2
 2 x 1/2 x 2, 2 x
3/4 x 2, 2 x 1 x
2, 2 x 1-1/4 x 2,
2 x 1-1/2 x 2
2-1/2 x 1-1/2 x 2-
1/2, 2-1/2 x 2 x
2-1/2
3/4 x 1/2 x 1, 1 x
1/2 x 3/4, 1 x
3/4 x 1/2
1-1/4 x 1/2 x
3/4, 1
1-1/4 x 3/4 x
1/2, 1
1-1/4 x 1 x 1/2,
3/4
1-1/2 x 3/4 x 1,
1-1/4
1-1/2 x 1 x 1/2,
1-1/4
1-1/2 x 1-1/4 x
1/2, 3/4, 2
2 x 1 x 1-1/2
2 x 1-1/4 x 1, 1-
1/22 x 1-1/2 x
3/4, 1, 1-1/4
2-1/2 x 2 x 1/2,
1, 1-1/4

6 x 2, 3, 4 300 a
(2070)
Bullhead Tee NPT 3/8 x 3/8 x 1/2 500 a
1/2 x 1/2 x 3/4, 1 (3445)
3/4 x 3/4 x 1
1 x 1 x 1-1/4, 1-
1/2, 2
1-1/4 x 1-1/4 x 1-
1/2, 2
1-1/2 x 1-1/2 x 2
2 x 2 x 2-1/2
SDG 13 Equal Cross Grooved 1-1/4, 1-1/2, 2, 2- 500 a
1/2, 3, 4, 5, 6, 8, (3445)
10, 12
76.1, 165 mm
60, 73, 76, 89, 500 b
108, 114, 139.7, (3445)
141, 159, 165,
168 mm
219 mm 300 b
(2070)
SDT 13 Equal Cross NPT 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
5, 6 300 a
(2070)
BSP 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
SDG 13R Reducing Cross Grooved 3x2 500 b
4 x 2, 3 (3445)
8 x 2, 4
139.7 x 114.3
mm
159 x 114.3 mm
165.1 x 60.3,
76.1, 88.9, 114.3
mm
219.1, 139.7, 300 b
159, 165.1 mm (2070)
SDT 51 Reducing Cross NPT 500 a
3/4 x 1/2 (3445)
1 x 3/4
1-1/4 x 3/4, 1
1-1/2 x 3/4, 1, 1-
1/4
2 x 3/4, 1, 1-1/4,
1-1/2
2 x 1/2 x 1, 1-
1/4, 1-1/2, 2
3 x 1, 1-1/4, 1-
1/2, 2, 2-1/2
4 x 2-1/2, 3

BSP 3/4 x 1/2 500 a

1-1/2 x 3/4 (3445)
1-1/4 x 1/2, 3/4,
1
1-1/2 x 1/2, 3/4,
1, 1-1/4
2 x 3/4, 1, 1-1/4,
1-1/2
2 x 1/2 x 1, 1-
1/4, 1-1/2, 2
3 x 3/4, 1, 1-1/4,
1-1/2, 2
4 x 1, 1-1/4, 1-
1/2, 2, 2-1/2, 3
SDT 22 Coupling NPT 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
BSP 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
5, 6 300 a
(2070)
SDG 33 Eccentric Grooved 300 b
Reducer 4 x 2, 3 (2070)
6 x 3, 4
8x4
88.9 x 60.3 mm
108 x 76.1, 88.9
mm
114.3 x 76.1 mm
139.7 x 114.3
mm
159 x 108, 114.3
mm
165.1 x 88.9,
114.3, 139.7 mm
168.3 x 139.7
mm

219 x 168 mm 365 b

273 x 219 mm (2510)
SDT 30 Reducing Socket NPT 1/2 x 3/8 500 a
3/4 x 3/8, 1/2 (3445)
1 x 3/8, 1/2, 3/4
1-1/4 x 1/2, 3/4,
1
1-1/2 x 1/2, 3/4,
1, 1-1/4
2 x 1/2, 3/4, 1, 1-
1/4, -1/2
2-1/2 x 1-1/2, 2
3 x 1-1/2, 2, 2-
1/2
4 x 2, 3
BSP 1/2 x 1/4, 3/8 500 a
3/4 x 1/4, 3/8, (3445)
1/2
1 x 1/4, 3/8, 1/2,
3/4
1-1/4 x 1/4, 3/8,
1/2, 3/4, 1
1-1/2 x /4, 3/8,
1/2, 3/4, 1, 1-1/4
2 x 1/2, 3/4, 1, 1-
1/4, 1-1/2
2-1/2 x 1/2, 3/4,
1, 1-1/4, 1-1/2, 2
3 x 1/2, 3/4, 1, 1-
1/4, 1-1/2, 2, 2-
1/2
SDG 35 Concentric Grooved 500 a
Reducer 2 x 3/4, 1, 1-1/4, (3450)
1-1/2
2-1/2 x 1, 1-1/4,
1-1/2, 2
3 x 3/4, 1, 1-1/2,
2, 2-1/1
4 x 1, 1-1/2, 2, 2-
1/2, 3
5 x 3, 4
6 x 1, 2, 2-1/2, 3,
4, 5
8 x 2-1/2, 3, 4, 5,
6

Concentric Grooved 1-1/4 x 1 500 b

Reducer 1-1/2 x 1, 1-1/2 (3450)
4 x 1-1/4
5 x 2-1/2
76 x 42, 48, 60
mm
89 x 42, 76 mm
108 x 60.3, 73,
76 mm
114.3 x 76.1 mm
133 x 108, 114.3
mm
139.7 x 60.3,
76.1, 88.9, 114.3
mm
141 x 89, 114
mm
159 x 60.3, 76.1,
88.9, 108, 114.3,
133 mm
165.1 x 60.3,
76.1, 88.9,
114.3, 139.7 mm
168.3 x 76.1,
139.7 mm
216.3 x 114.3, 300 b
165.1 mm (2070)
219.1 x 108,
139.7, 159,
165.1 mm
273 x 159,
165.1, 168.3,
219.1 mm
322.9 x 219.1,
273 mm
SDG 37 Concentric Grooved x 2 x 3/4, 1, 1-1/4, 500 a
Reducer Female NPT 1-1/2 (3450)
2-1/2 x 1, 1-1/4,
1-1/2, 2
3 x 3/4, 1, 1-1/2,
2, 2-1/2
4 x 1, 1-1/2, 2, 2-
1/2, 3
5 x 3, 4
6 x 2, 2-1/2, 3, 4,
5
8 x 2-1/2, 3, 4, 5,
6
500 b
4 x 1/2, 3/4, 1- (3450)
1/2
8 x 1-1/2, 2
76 x 21, 27, 34,
42, 48, 60 mm
89 x 21, 76 mm
108 x 34, 42,
48, 60, 76, 89
mm
114 x 76 mm
133 x 48, 76 mm
139.7 x 27, 34,
42, 48, 60, 76,
89, 114 mm
141.3 x 89, 114
mm
159 x 27, 34, 42,
48, 60, 89, 114
mm
165 x 21, 27, 34,
42, 48, 60, 76,
89, 114 mm
219 x 76 mm
SDT 57 Bushing NPT 1/2 x 1/4, 3/8 500 a
3/4 x 3/8, 1/2 (3445)
1 x 1/2, 3/4
1-1/4 x 1/2, 3/4,
1
1-1/2 x 3/8, 1/2,
3/4, 1, 1-1/4
2 x 3/8, 1/2, 3/4,
1, 1-1/4, 1-1/2
2-1/2 x 1/2, 3/4,
1, 1-1/4, 1-1/2, 2
3 x 1/2, 3/4, 1, 1-
1/4, 1-1/2, 2, 2-
1/2
3-1/2 x 2-1/2, 3
4 x 3/4, 1, 1-1/4,
1-1/2, 2, 2-1/2,
3, 3-1/2
5 x 2, 3, 4 300 a
6 x 2, 2-1/2, 3, 3- (2070)
1/2, 4, 5
BSP 1/2 x 1/4, 3/8 500 a
3/4 x 1/4, 3/8, (3445)
1/2
1 x 1/4, 3/8, 1/2,
3/4
1-1/4 x 1/4, 3/8,
1/2, 3/4, 1
1-1/2 x 1/4, 3/8,
1/2, 3/4, 1, 1-1/4
2 x 1/4, 3/8, 1, 1-
1/4, 1-1/2
2-1/2 x 1/2, 3/4,
1-1/2, 2
3 x 2, 2-1/2
3-1/2 x 3
4 x 3/4, 1, 1-1/4,
1-1/2, 3
5 x 3, 4 300 a
6 x 2, 2-1/2, 5 (2070)
SDT 111 Hex Nipple BSP 1/2 x 1/4, 3/8 500 a
Reducing 3/4 x 1/4, 3/8, (3445)
1/2
1 x 1/2, 3/4
1-1/4 x 1/2, 3/4,
1
1-1/2 x 1/2, 3/4,
1, 1-1/4
2 x 1/2, 3/4, 1, 1-
1/4, 1-1/2
2-1/2 x 1, 1-1/4,
1-1/2
3 x 1-1/2, 2, 2-
1/2
4 x 2, 4 x 2-1/2,
4x3
SDG 14 End Cap Grooved 1-1/4, 1-1/2, 2, 2- 500 a
1/2, 3, 4, 5, 6, 8, (3450)
10, 12
76.1, 165 mm
1-1/4, 1-1/2, 2, 2- 500 b
1/2, 3, 4, 5, 6, 8, (3450)
10, 12
76.1, 89, 114,
140, 165 mm
SDT 14 End Cap NPT 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
5, 6 300 a
(2070)
BSP 1/2, 3/4, 1, 1- 500 a
1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
5, 6 300 a
(2070)
SDG 16 Flange Adapter Flanged x 2, 2-1/2, 3, 4, 5, 500 a
Grooved 6, 8 (3450)
76.1, 165 mm
1, 1-1/4, 1-1/2, 300 a
10, 12 (2070)
108, 133, 139.7,
159 mm
60, 73, 76.1, 89, 365 b
114 mm (2510)
139.7, 141.3, 225 b
165, 168, 219, (1550)
273, 324 mm
 SDT 59F Union Flat Seat BSP 1/2, 3/4, 1, 1- 500 a
without gasket 1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
SDT 59C Union Conical BSP 1/2, 3/4, 1, 1- 500 a
Joint Iron to Iron 1/4, 1-1/2, 2, 2- (3445)
1/2, 3, 4
SDG 102 Short Radius Tee Grooved 2, 2-1/2, 3, 4, 6, 8 300 a
76, 139.7, 165 (2070)
mm
108, 159, 216.3 300 b
mm (2070)
114, 165 mm 365 b
(2510)

SDT 11 Hex Nipple NPT 1/2, 3/4, 1, 1-1/4, 1- 500 a

1/2, 2, 2-1/2 (3445)
BSP 1/2, 3/4, 1, 1-1/4, 1- 500 a
1/2, 2, 2-1/2, 3, 4 (3445)
5, 6 300 a
(2070)
Remarks:
a. Malleable Iron Fittings
b. Ductile Iron Fittings

Details Company
Category Pipe Fittings Shield Fire Safety and Security
Ltd
Class of Work 1920 - Coupling & Fitting, All Unit 3 Endeavor Drive, Basildon,
Type Essex, SS14 3WF, United
Kingdom
Approval Standard FM 1920 - Pipe Couplings and United Kingdom
Fittings for Aboveground Fire http://www.shieldglobal.com
Protection Systems

Certi cation Type FM Approved

Listing Country United Kingdom

Pipes/Fittings/Couplings | Aboveground Pipe and Fittings | Grooved Couplings, Standard-Rigid

SDG 20
Product Description

Rated Working Pressures for Model SDG 20 Rigid Coupling by Pipe a, b, c

Nominal Pipe Size
Pipe 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
Description (33.7) (42.7) (48.3) (60.3) (73.1) (76.1) (88.9) (108) (114.3) (133) (139.7) (141.3) (159) (165.1) (168.3) (216.3) (219.1) (267) (273) (318) (323.9)
Schedule 300 300 350 350 350 350 350 350 350
40, (2070) (2070) (2415) (2415) (2415) (2415) (2415) (2415) (2415)
Cut Groove
Schedule 300 300 350 350 350 350 350 350 350
40, (2070) (2070) (2415) (2415) (2415) (2415) (2415) (2415) (2415)
Roll Groove
Schedule
30,
Cut Groove
Schedule 300 300 350 350 350 350 350 350 350
30, (2070) (2070) (2415) (2415) (2415) (2415) (2415) (2415) (2415)
Rolled
Groove
Thinwall
Pipes,
Rolled
Groove
Schedule 300 300 350 350 350 350 350 350
10, (2070) (2070) (2415) (2415) (2415) (2415) (2415) (2415)
Rolled
Groove
0.188” 350
Wall, (2415)
Rolled
Groove
Schedule
10,
Swage
Groove
Lightwall
Pipes,
Rolled
Groove
Lightwall
Pipes,
Swage
Groove
Schedule 5
Pipe,
Rolled
Groove
EN 10220
(ISO 4200),
Cut Groove
Thickness F 300 300 300 350 300 350 350 350 300 350 350 300 350
(2070) (2070) (2070) (2415) (2070) (2415) (2415) (2415) (2070) (2415) (2415) (2070) (2415)
Thickness G 300 300 300 350 300 350 350 350 300 350 350 300 350
(2070) (2070) (2070) (2415) (2070) (2415) (2415) (2415) (2070) (2415) (2415) (2070) (2415)
 EN 10220
(ISO 4200),
Rolled
Groove
Thickness D 300 350 350 350 300 350 350 300 350
(2070) (2415) (2415) (2415) (2070) (2415) (2415) (2070) (2415)
Thickness E 300 350 300 350 350 350 300 350 350 300 350
(2070) (2415) (2070) (2415) (2415) (2415) (2070) (2415) (2415) (2070) (2415)
Thickness F 300 300 300 350 300 350 350 350 300 350 350 300 350
(2070) (2070) (2070) (2415) (2070) (2415) (2415) (2415) (2070) (2415) (2415) (2070) (2415)
Thickness G 300 300 300 350 300 350 350 350 300 350 350 300 350
(2070) (2070) (2070) (2415) (2070) (2415) (2415) (2415) (2070) (2415) (2415) (2070) (2415)
EN 10255 300 300 350 350 350 350
(BS 1387) (2070) (2070) (2415) (2415) (2415) (2415)
Medium,
Rolled
Groove
EN 10255 300 300 350 350 350 350
(BS 1387) (2070) (2070) (2415) (2415) (2415) (2415)
Heavy,
Rolled
Groove
Chinese 300 300 300 350 300 350 350 350 350 350 350
Standard (2070) (2070) (2070) (2415) (2070) (2415) (2415) (2415) (2415) (2415) (2415)
GB/T 3092,
Regular
Rolled
Groove
Chinese 300 300 300 350 300 350 350 350 350 350 350
Standard (2070) (2070) (2070) (2415) (2070) (2415) (2415) (2415) (2415) (2415) (2415)
GB/T 3092,
Extra
Heavy
Rolled
Groove
Remarks:
a.) Minimum schedule cut groove pipe to be joined: 6 inch or smaller, Schedule 40; 8 inch or larger, Schedule 30
b.) Minimum schedule rolled groove pipe to be joined: 6 inch or smaller, Schedule 10; 8, 10 or 12 inch - 0.188 inch (4.78 mm) wall
c.) All couplings in table above, Approved when supplied with an EDPM gasket using standard gasket lubricant or dry lubricant

Details Company
Category Grooved Couplings, Standard- Shield Fire Safety and Security Ltd
Unit 3 Endeavor Drive, Basildon, Essex, SS14
Rigid
3WF, United Kingdom
Class of Work 1920 - Coupling & Fitting, All United Kingdom
Type http://www.shieldglobal.com

Approval Standard FM 1920 - Pipe Couplings and

Fittings for Aboveground Fire
Protection Systems

Certi cation Type FM Approved

Listing Country United Kingdom

Pipes/Fittings/Couplings | Aboveground Pipe and Fittings | Grooved Couplings, Standard-Rigid

SDG 22
Product Description
Rated Working Pressures for Model SDG 22 Rigid Coupling by Pipe a, b, c

Nominal Pipe Size

Pipe 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8 10 12
Description (33.7) (42.7) (48.3) (60.3) (73.1) (76.1) (88.9) (108) (114.3) (133) (139.7) (141.3) (159) (165.1) (168.3) (216.3) (219.1) (267) (273) (318) (323.9)
Schedule 500 500 500 500 500 500 500 500 500 500 500 500 300 300 300 300
40, (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070) (2070) (2070) (2070)
Cut Groove
Schedule 500 500 500 500 500 500 500 500 500 500 500 500 300 300 300
40, (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070) (2070) (2070)
Roll Groove
Schedule 300 300 300
30, (2070) (2070) (2070)
Cut Groove
Schedule 500 500 500 500 500 500 500 500 500 500 500 500 300 300 300
30, (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070) (2070) (2070)
Rolled
Groove
Thinwall
Pipes,
Rolled
Groove
Schedule 500 500 500 500 500 500 500 500 500 500 500 500
10, (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450)
Rolled
Groove
0.188” 300 300 300
Wall, (2070) (2070) (2070)
Rolled
Groove
Schedule
10,
Swage
Groove
Lightwall
Pipes,
Rolled
Groove
Lightwall
Pipes,
Swage
Groove
Schedule 5
Pipe,
Rolled
Groove
EN 10220
(ISO 4200),
Cut Groove
Thickness F 500 500 500 500 500 300 500 300 500 500 300 500 500 300 300 300 300
(3445) (3445) (3445) (3445) (3445) (2070) (3445) (2070) (3445) (3445) (2070) (3445) (3445) (2070) (2070) (2070) (2070)
Thickness G 500 500 500 500 500 500 500 300 500 300 500 500 300 500 500 300 300 300 300
(3445) (3445) (3445) (3445) (3445) (3445) (3445) (2070) (3445) (2070) (3445) (3445) (2070) (3445) (3445) (2070) (2070) (2070) (2070)
 EN 10220
(ISO 4200),
Rolled
Groove
Thickness D 300 500 500 500 300 500 500 300 300 300 300
(2070) (3445) (3445) (3445) (2070) (3445) (3445) (2070) (2070) (2070) (2070)
Thickness E 500 500 300 500 500 500 300 500 500 300 300 300 300
(3445) (3445) (2070) (3445) (3445) (3445) (2070) (3445) (3445) (2070) (2070) (2070) (2070)
Thickness F 500 500 500 500 500 500 500 300 500 500 500 300 500 500 300 300 300 300
(3445) (3445) (3445) (3445) (3445) (3445) (3445) (2070) (3445) (3445) (3445) (2070) (3445) (3445) (2070) (2070) (2070) (2070)
Thickness G 500 500 500 500 500 500 500 300 500 500 500 300 500 500 300 300 300 300
(3445) (3445) (3445) (3445) (3445) (3445) (3445) (2070) (3445) (3445) (3445) (2070) (3445) (3445) (2070) (2070) (2070) (2070)
EN 10255 500 500 500 500 500 500 500 500 500
(BS 1387) (3445) (3445) (3445) (3445) (3445) (3445) (3445) (3445) (3445)
Medium,
Rolled
Groove
EN 10255 500 500 500 500 500 500 500 500 500
(BS 1387) (3445) (3445) (3445) (3445) (3445) (3445) (3445) (3445) (3445)
Heavy,
Rolled
Groove
Chinese 500 500 500 500 500 500 500 300 500 500 500 500 500 300 300 300
Standard (3445) (3445) (3445) (3445) (3445) (3445) (3445) (2070) (3445) (3445) (3445) (3445) (3445) (2070) (2070) (2070)
GB/T 3092,
Regular
Rolled
Groove
Chinese 500 500 500 500 500 500 500 300 500 500 500 500 500 300 300 300
Standard (3445) (3445) (3445) (3445) (3445) (3445) (3445) (2070) (3445) (3445) (3445) (3445) (3445) (2070) (2070) (2070)
GB/T 3092,
Extra
Heavy
Rolled
Groove
Remarks:
a.) Minimum schedule cut groove pipe to be joined: 6 inch or smaller, Schedule 40; 8 inch or larger, Schedule 30
b.) Minimum schedule rolled groove pipe to be joined: 6 inch or smaller, Schedule 10; 8, 10 or 12 inch - 0.188 inch (4.78 mm) wall
c.) All couplings in table above, Approved when supplied with an EDPM gasket using standard gasket lubricant or dry lubricant

Details Company
Category Grooved Couplings, Standard-Rigid Shield Fire Safety and Security
Unit 3 Endeavor Drive, Basildon
Class of Work 1920 - Coupling & Fitting, All Type Kingdom
United Kingdom
Approval Standard FM 1920 - Pipe Couplings and Fittings for http://www.shieldglobal.com
Aboveground Fire Protection Systems

Certi cation Type FM Approved

Listing Country United Kingdom

Pipes/Fittings/Couplings | Aboveground Pipe and Fittings | Grooved Couplings, Standard-Flexible

Model SDG 25
Product Description

Rated Working Pressures for Model SDG 25 Flexible Coupling by Pipe a, b, c

Nominal Pipe Size
Pipe 1 1-1/4 1-1/2 2 2-1/2 3 4 5 6 8
Description (33.7) (42.7) (48.3) (60.3) (73.1) (76.1) (88.9) (108) (114.3) (133) (139.7) (141.3) (159) (165.1) (168.3) (216.3) (219.1) (267
Schedule 500 500 500 500 500 500 500 500 500 500 500 500 300
40, (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070)
Cut Groove
Schedule 500 500 500 500 500 500 500 500 500 500 500 500 300
40, (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070)
Roll Groove
Schedule 300
30, (2070)
Cut Groove
Schedule 500 500 500 500 500 500 500 500 500 500 500 500 300
30, (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070)
Rolled
Groove
Thinwall
Pipes,
Rolled
Groove
Schedule 500 500 500 500 500 500 500 500 500 500 500 500
10, (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450)
Rolled
Groove
0.188” 300
Wall, (2070)
Rolled
Groove
Schedule
10,
Swage
Groove
Lightwall
Pipes,
Rolled
Groove
Lightwall
Pipes,
Swage
Groove
Schedule 5
Pipe,
Rolled
Groove
EN 10220
(ISO 4200),
Cut Groove
 Thickness F 500 500 500 500 500 300 500 300 500 500 300 500 500 300
(3450) (3450) (3450) (3450) (3450) (2070) (3450) (2070) (3450) (3450) (2070) (3450) (3450) (2070)
Thickness G 500 500 500 500 500 500 500 300 500 300 500 500 300 500 500 300
(3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070) (3450) (2070) (3450) (3450) (2070) (3450) (3450) (2070)
EN 10220
(ISO 4200),
Rolled
Groove
Thickness D 300 500 300 500 500 300 500 500
(2070) (3450) (2070) (3450) (3450) (2070) (3450) (3450)
Thickness E 500 500 300 500 300 500 500 300 500 500 300
(3450) (3450) (2070) (3450) (2070) (3450) (3450) (2070) (3450) (3450) (2070)
Thickness F 500 500 500 500 500 500 500 300 500 300 500 500 300 500 500 300
(3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070) (3450) (2070) (3450) (3450) (2070) (3450) (3450) (2070)
Thickness G 500 500 500 500 500 500 500 300 500 300 500 500 300 500 500 300
(3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070) (3450) (2070) (3450) (3450) (2070) (3450) (3450) (2070)
EN 10255 500 500 500 500 500 500 500 500 500
(BS 1387) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450)
Medium,
Rolled
Groove
EN 10255 500 500 500 500 500 500 500 500 500
(BS 1387) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450) (3450)
Heavy,
Rolled
Groove
Chinese 500 500 500 500 500 500 500 300 500 300 500 300
Standard (3450) (3450) (3450) (3450) (3450) (3450) (3450) (2070) (3450) (2070) (3450) (2070)
GB/T 3091,
Rolled
Groove
JIS G3452, 300 30
Cut Groove (2070) (207
JIS G3452, 300 30
Rolled (2070) (207
Groove
Remarks:
a.) Minimum schedule cut groove pipe to be joined: 6 inch or smaller, Schedule 40; 8 inch or larger, Schedule 30
b.) Minimum schedule rolled groove pipe to be joined: 6 inch or smaller, Schedule 10; 8, 10 or 12 inch - 0.188 inch (4.78 mm) wall
c.) All couplings in table above, Approved when supplied with an EDPM gasket using standard gasket lubricant or dry lubricant

Details Company
Category Grooved Couplings, Standard-Flexible Shield Fire Safety and Se
Unit 3 Endeavor Drive, B
Class of Work 1920 - Coupling & Fitting, All Type 3WF, United Kingdom
United Kingdom
Approval Standard FM 1920 - Pipe Couplings and Fittings http://www.shieldgloba
for Aboveground Fire Protection
Systems

Certi cation Type FM Approved

Listing Country United Kingdom

Pipes/Fittings/Couplings | Aboveground Pipe and Fittings | Grooved Couplings, Reducing-Flexible

SDG 30
Product Description

Product Speci cation

Rated Working Pressure

Model No End Connection Nominal Pipe Size, in Remarks
psi (kPa)

SDG 30 Cut Groove 2 x 1 1/2 300 (2065) a, b, c, d

Rolled Groove 2 1/2 x 1, 2
3 x 1, 2, 2 1/2
4 x 1, 2
4 x 2 1/2, 3
6 x 3, 4
8x6
SDG 30 Cut Groove 76.1 x 33.7, 1 1/2, 2 300 (2065) a, b, c, d
Rolled Groove 3 x 76.1
4 x 76.1
165 x 4
8 x 165

Remarks:
a. Minimum schedule cut groove pipe to be joined: 6 in. NPS and smaller – Schedule 40; 8 in. NPS and larger – Schedule 30.
b. Minimum schedule rolled groove pipe to be joined: 6 in. NPS and smaller – Schedule 10S; 8 in. NPS and larger 0.188 in. (5 mm) wall.
c. Approved when supplied with EPDM gasket.
d. Approved for use with GB/T3092 regular and extra heavy pipe, ISO 4200, and BS 1387 medium and heavy pipe.

Details Company
Category Grooved Shield Fire Safety and Security
Ltd
Couplings,
Unit 3 Endeavor Drive, Basildon,
Reducing-Flexible
Essex, SS14 3WF, United Kingdom
Class of Work 1920 - Coupling & United Kingdom
Fitting, All Type http://www.shieldglobal.com

Approval Standard FM 1920 - Pipe

Couplings and
Fittings for
Aboveground Fire
Protection
Systems

Certi cation Type FM Approved

Listing Country United Kingdom

Pipes/Fittings/Couplings | Aboveground Pipe and Fittings | Pipe Fittings, Side Outlet, Rigid

Models SDG 44, SDG 40, SDG 42, SDG 49, SDG 47
Product Description

Product Speci cation

Rated Working Pressure

Model No Description Nominal Pipe Size, in Remarks
psi (kPa)

SDG 44 Mechanical Tee, 2 x 1 1/4, 1 1/2 300 (2065) a, c

Grooved Outlet 2 1/2 x 1 1/4, 1 1/2
76 x 1, 1 1/4, 1 1/2
3 x 1, 1 1/4, 1 1/2, 2
4 x 1, 1 1/4, 1 1/2, 2, 2 1/2, 3
133 x 3,
139.7 x 1 1/4, 1 1/2, 2, 2 1/2, 3, 4
159 x 108, 4
5 x 1 1/4, 1 1/2, 2, 2 1/2, 3
165 x 2, 2 1/2, 3, 4
6 x 1 1/4, 1 1/2, 2, 2 1/2, 3, 4
8 x 2, 2, 2 1/2, 76, 3, 108, 4
10 x 108, 4
SDG 44 Mechanical Tee, 89 x 34, 42, 48, 60 mm 365 (2515) a, c
Grooved Outlet
SDG 44 Mechanical Tee, 114 x 34, 42, 48, 60, 73, 76, 89 mm 300 (2065) a, c
Grooved Outlet 133 x 89 mm
140 x 42, 48, 60, 76, 89 mm
159 x 108, 114 mm
165 x 42, 48, 60, 76, 89, 108, 114 mm
168 x 42, 48, 60, 73, 76, 89, 114 mm
219 x 60, 73, 76, 89, 108, 114 mm
SDG 40 Mechanical Tee, 1 1/4 x 1/2, 3/4, 1 300 (2065) a, c
Grooved Outlet 1 1/2 x 1/2, 3/4, 1
2 x 1/2, 3/4, 1
2 1/2 x 1/2, 3/4, 1
76 x 1/2, 3/4, 1
3x1
4 x 1, 1 1/4, 1 1/2
6 x 1, 1 1/4, 1 1/2
SDG 42 Mechanical Tee, 2 x 1/2, 3/4 300 (2065) a, b, c
Threaded Outlet 2 1/2 x 1/2, 3/4
3 x 1/2, 3/4
76 x 1/2, 3/4
4 x 1/2, 3/4
108 x 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 76
133 x 1/2, 3/4, 1, 1 1/4, 1 1/2, 2, 76, 3
139 x 1/2, 3/4 , 4
159 x 1/2, 3/4, 1, 1 1/4, 1 1/2, 2
219 x 1, 1 1/4, 1 1/2, 2, 2 1/2, 76, 3, 4
10 x 1 1/2, 2, 76, 3, 4
 Rated Working Pressure
Model No Description Nominal Pipe Size, in Remarks
psi (kPa)

SDG 42 Mechanical Tee, 2 x 1, 1 1/4, 1 1/2 300 (2065) a, b, c

Threaded Outlet 2 1/2 x 1, 1 1/4, 1 1/2
76 x 1, 1 1/4, 1 1/2
3 x 1, 1 1/4, 1 1/2, 2
4 x 1, 1 1/4, 1 1/2, 2, 2 1/2, 3
139.7 x 1, 1 1/4, 1 1/2, 2
5 x 1 1/4, 1 1/2, 2, 2 1/2, 3
165 x 1, 1 1/4, 1 1/2, 2, 2 1/2, 3
6 x 1 1/4, 1 1/2, 2, 2 1/2, 3, 4
SDG 42 Mechanical Tee, 89 x 21, 27, 34, 42, 48, 60 mm 365 (2515) a, b, c, d
Threaded Outlet
SDG 42 Mechanical Tee, 114 x 21, 27, 34, 42, 48, 60, 73, 76, 89 mm 300 (2065) a, b, c, d
Threaded Outlet 168 x 34, 42, 48, 60, 73, 76, 89, 114 mm
219 x 34, 42, 48, 60, 73, 76, 89, 114 mm
SDG 42 Mechanical Tee, 108 x 21, 27, 34, 42, 48, 60, 76 mm 300 (2065) a, c, d
Threaded Outlet 133 x 21, 27, 34, 42, 48, 60, 76, 89 mm
140 x 21, 27, 34, 42, 48, 60, 76, 89, 114 mm
159 x 21, 27, 34, 42, 48, 60, 76, 89, 114 mm
165 x 21, 27, 34, 42, 48, 60, 76, 89, 114 mm
SDG 49 Mechanical Cross, 2 x 1 1/4, 1 1/2 300 (2065) a, c
Grooved Outlet 2 1/2 x 1 1/4, 1 1/2
76 x 1 1/4, 1 1/2
3 x 1 1/4, 1 1/2, 2
4 x 1 1/4, 1 1/2, 2, 2 1/2, 3
139.7 x 2, 2 1/2, 3
5 x 1 1/4, 1 1/2, 2, 2 1/2, 3
165 x 2, 2 1/2, 3
6 x 1 1/4, 1 1/2, 2, 2 1/2, 3, 4
SDG 47 Mechanical Cross, 2 x 1, 1 1/4, 1 1/2 300 (2065) a, b, c
Threaded Outlet 2 1/2 x 1, 1 1/4, 1 1/2
76 x 1, 1 1/4, 1 1/2
3 x 1, 1 1/4, 1 1/2, 2
4 x 1, 1 1/4, 1 1/2, 2, 2 1/2, 3
139.7 x 1, 1 1/4, 1 1/2, 2, 2 1/2, 3
5 x 1 1/4, 1 1/2, 2, 2 1/2, 3
165 x 1, 1 1/4, 1 1/2, 2, 2 1/2, 3
6 x 1 1/4, 1 1/2, 2, 2 1/2, 3, 4

Remarks:
a. For use on Schedule 10 and heavier steel sprinkler pipe.
b. Approved when supplied with NPT female threads.
c. Approved when supplied with EPDM gasket.
d. Approved when supplied with BSP or DIN female threads.

Details Company
Category Pipe Fittings, Side Shield Fire Safety and Security
Ltd
Outlet, Rigid
Unit 3 Endeavor Drive, Basildon,
Essex, SS14 3WF, United Kingdom
United Kingdom
 Class of Work 1920 - Coupling & http://www.shieldglobal.com
Fitting, All Type

Approval Standard FM 1920 - Pipe

Couplings and
Fittings for
Aboveground Fire
Protection
Systems

Certi cation Type FM Approved

Listing Country United Kingdom

Shield
Swivel Ring
Hanger
Function
Designed for the suspension of non-insulated
stationary pipe lines. The insert nut allows a vertical
adjustment after installation, is tapped to NFPA
reduced rod size standards. SD-HBF has a layer of felt
which separates the pipe from the hanger to reduce
vibration and sound.

Approval
Federal Specification WW-H-171E & A-A-1192 (Type 10)
Manufacturers Standardization Society MSS SP-69 & SP-58 (Type 10)
UL Listed/FM Approved.

Material and Finish

Pre-Galvanized coil adheres to ASTM A653 G90
Low Carbon Steel - Electro Galvanized to ASTM B633
Low Carbon Steel - Hot dipped galvanized to ASTM A123
Low Carbon Steel - Zinc Flake Coating to ISO 10683

SD-HB
Pipe Size Max. Rec.
Rod Size Dimensions
Load

A B C D E
Inch Inch Inch Inch Inch Inch lbs.
½ ⅜ 1⅞ 17/16 2¾ 31/16 300
¾ ⅜ 111/16 1⅛ 2½ 31/16 300
1 ⅜ 1⅝ 1 2½ 33/16 300
1¼ ⅜ 115/16 11/16 213/16 39/16 300
1½ ⅜ 2⅛ 11/16 3⅛ 3⅞ 300
2 ⅜ 27/16 1⅛ 35/16 4⅜ 300
2½ ⅜ 2¾ 1¼ 311/16 5 525
3 ⅜ 2⅞ 1⅛ 3¾ 59/16 525
3½ ⅜ 3⅜ 1⅜ 45/16 65/16 525
4 ⅜ 3⅞ 1½ 4½ 7 650
5 ½ 4⅝ 1⅝ 5⅝ 8⅜ 1000
6 ½ 5⅝ 2¼ 6½ 913/16 1000
8 ½ 613/16 27/16 715/16 12¼ 1000

Note:
• Swivel Nut is coming along with hanger.
• Swivel Nut is available for 10mm and 12mm Rod size.
• Swivel hanger is also available in SS material upon request.

42 * Refer to UL/FM certificates for more information.

* SHIELD reserves the right to change the contents without notice.
Shield
Clevis
Hanger
Function
Designed for the suspension of non-insulated
stationary pipe lines. SD-HCF has a layer of felt which
separates the pipe from the hanger to reduce vibration
and sound.

Approval
Federal Specification WW-H-171E & A-A-1192A (Type 1)
Manufacturers Standardization Society MSS SP-69 & SP-58 (Type 1)
UL Listed/FM Approved.

Material and Finish

Pre-Galvanized coil (upto 4”) adheres to ASTM A653 G90
Low Carbon Steel - Electro Galvanized to ASTM B633
Low Carbon Steel - Hot dipped galvanized to ASTM A123
Low Carbon Steel - Zinc Flake Coating to ISO 10683

SD-HC
Pipe Size Max. Rec.
Rod Size Adjustment Cross Bolt
Load

A B C D E
Inch Inch Inch Inch Inch Inch Inch lbs.
½ ⅜ 27/16 2⅞ 1⅛ 2 ¼ 610
¾ ⅜ 2⅝ 3⅛ 1¼ 23/16 ¼ 610
1 ⅜ 31/16 3¾ 1⅝ 2⅝ ¼ 610
1¼ ⅜ 3⅜ 43/16 1⅝ 215/16 ¼ 610
1½ ⅜ 3½ 47/16 1½ 31/16 ¼ 610
2 ⅜ 3¾ 5 1⅝ 35/16 ¼ 610
2½ ½ 3⅞ 5⅜ 1⅛ 3¼ ⅜ 1130
3 ½ 4¼ 6 1⅛ 3⅝ ⅜ 1130
3½ ½ 4½ 6½ 1¼ 3⅞ ⅜ 1130
4 ⅝ 5½ 711/16 1¾ 411/16 ⅜ 1430
5 ⅝ 6⅛ 9⅛ 1⅞ 55/16 ½ 1430
6 ¾ 6⅞ 10⅛ 1⅝ 6 ½ 1940
8 ⅞ 8¾ 12⅞ 2⅛ 7⅞ ⅝ 2000
10 ⅞ 9¼ 14⅝ 1¾ 8⅛ ¾ 3600
12 ⅞ 11⅝ 18 2½ 10½ ¾ 3800
14 1 12¾ 19¾ 2⅝ 11¼ ⅞ 4200
16 1 14⅛ 22⅛ 2⅝ 13⅝ 1 4600
18 1⅛ 16½ 25½ 3½ 15 1⅛ 4800
20 1¼ 18 28 4⅛ 16⅛ 1¼ 4800
24 1¼ 20¼ 32¼ 4¾ 18⅜ 1¼ 4800
30 1¼ 24½ 38⅞ 5½ 21½ 1¼ 6000
36 1½ 32 50 8¾ 30 1½ 9500

Note:
• Use of an upper locknut ensures proper performance. Pipe spacers provided on 30 and larger clevises. If ordering SD-HCF felt lined hangers for pipe size
of 3½ or under order the next largest size to allow for the thickness of the felt lining.
• “D” Adjustment (Top of cross bolt to bottom of hanger rod nut)
• When an over-sized clevis is used, a pipe spacer should be placed over the clevis bolt to prevent the lower U-strap from moving inward.
• Clevis hanger is also available in SS material upon request.

* Refer to UL/FM certificates for more information. 43

* SHIELD reserves the right to change the contents without notice.
 VFXT.EX15299 - Hangers, Pipe

Hangers, Pipe
See General Information for Hangers, Pipe

SHIELD FIRE SAFETY & SECURITY LTD EX15299

Unit 3, Endeavour Dr
Basildon, SS14 3WF UNITED KINGDOM
Model Hanger Rod Nominal
Designation Type Size Pipe Size Comments

SD-CBC 110 MI, SD-CBC 110 Universal Beam 3/8 in. Up to 4 Malleable Iron, Ductile Iron
DI Clamp

SD-CBC 115 MI Universal Beam 1/2 in. Up to 8 Malleable Iron

Clamp

SD-CBC 210 MI, SD-CBC 210 Universal Beam 3/8 in. Up to 4 Malleable Iron, Ductile Iron
DI Clamp

SD-CBCA 110 DI Universal Beam 3/8 in. Up to 4 Ductile Iron

Clamp

SD-CBCA 115 DI Universal Beam 1/2 in. Up to 8 Ductile Iron

Clamp

SD-HB Band Hanger 3/8 in., 10 2-1/2, 3, 3-1/2, 4 -

mm

SD-HB Band Hanger 3/8 in., 10 3/4, 1, 1-1/4, 1-1/2, 2 For use with 3/8" Total
mm Captive.

SD-HB Band Hanger 1/2 in., 12 5, 6, 8 -

mm

SD-HC Clevis Hanger 1/2 in. 2-1/2, 3, 3-1/2 -

SD-HC Clevis Hanger 5/8 in. 4, 5 -

SD-HC Clevis Hanger 3/4 in. 6, 8 -

SD-HC Clevis Hanger 3/8 in. 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 Plastic Coated, Felt Lined

SD-HC Clevis Hanger 7/8 in. 10, 12 Plastic Coated, Felt Lined

SD-HC Clevis Hanger 1/2 in. 2-1/2, 3, 3-1/2 Plastic Coated, Felt Lined

SD-HC Clevis Hanger 5/8 in. 4, 5 Plastic Coated, Felt Lined

SD-HC Clevis Hanger 3/4 in. 6, 8 Plastic Coated, Felt Lined

SD-HB Band Hanger 3/8 in. 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 3-1/2, -
4

SD-HB Band Hanger 1/2 in. 5, 6, 8 -

SD-HB-M Band Hanger 10 mm 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 3-1/2, -

4

SD-HB-M Band Hanger 12 mm 5, 6, 8 -

SD-HB Band Hanger M10 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4 -

SD-HB Band Hanger M12 6, 8 -

SD-HC Clevis Hanger M10 1/2, 3/4, 1, 1-1/4, 1-1/2, 2 -

SD-HC Clevis Hanger M12 2-1/2, 3, 4 -

SD-HC Clevis Hanger M16 5, 6, 8 -

SD-UB U Bolt NA 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3, 4, 5, 6, 8 U and C orientation

SD-UB U Bolt NA 10 and 12 U orientation only

SD-GE-PPC Pipe Clamp M10 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 With or without EPDM Lining
 SD- GE-RLC Pipe Clamp M10 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2, 3 With or without EPDM Lining

Trademark and/or Tradename: , , ,

Last Updated on 2020-03-12

The appearance of a company's name or product in this database does not in itself assure that products so identified have been manufactured under UL Solutions' Follow - Up Service. Only
those products bearing the UL Mark should be considered to be Certified and covered under UL Solutions' Follow - Up Service. Always look for the Mark on the product.

UL Solutions permits the reproduction of the material contained in Product iQ subject to the following conditions: 1. The Guide Information, Assemblies, Constructions, Designs, Systems,
and/or Certifications (files) must be presented in their entirety and in a non-misleading manner, without any manipulation of the data (or drawings). 2. The statement "Reprinted from Product
iQ with permission from UL Solutions" must appear adjacent to the extracted material. In addition, the reprinted material must include a copyright notice in the following format: "©2023 UL
LLC."
Sprinkler System Components | Concrete Insert Components | Pipe Hangers, Loop

Loop Hangers
Product Description

Product Speci cation

Nominal Pipe Size

Model No Description Hanger Rod Size, in (mm) Remarks
in (mm)

SD-HB Loop Hanger 3/8 (10) 3/4 through 4 (20 through 100) a, b
SD-HB Loop Hanger 1/2 (12) 5 through 8 (125 through 200) a, b

Remarks:
a) The SD-HB is FM Approved as a 200R when made with an O-ring in place of a ared nut and as a 200S with a modi ed ring nut.
b) Product marked with an ‘S’ designation identi es a speci c manufacturing location.

Details Company
Category Pipe Hangers, Shield Fire Safety and Security
Ltd
Loop
Unit 3 Endeavor Drive, Basildon,
Class of Work 1951 - Pipe Essex, SS14 3WF, United Kingdom
hangers For AS United Kingdom
Sys http://www.shieldglobal.com

Approval Standard FM 1951, 1952,

1953 - Pipe
Hanger
Components for
Automatic
Sprinkler Systems

Certi cation Type FM Approved

Listing Country United Kingdom

Sprinkler System Components | Concrete Insert Components | Pipe Hangers, Clevis

Clevis Hangers
Product Description

Product Speci cation

Nominal Pipe Size

Model No Description Hanger Rod Size, in (mm) Remarks
in (mm)

SD-HC Clevis Hanger 3/8 (10) 3/4 (20) a

SD-HC Clevis Hanger 3/8 (10) 1 (25) a
SD-HC Clevis Hanger 3/8 (10) 1 1/4 (32) a
SD-HC Clevis Hanger 3/8 (10) 1 1/2 (40) a
SD-HC Clevis Hanger 3/8 (10) 2 (50) a
SD-HC Clevis Hanger 3/8 (10) 2 1/2 (65) -
SD-HC Clevis Hanger 3/8 (10) 3 (80) -
SD-HC Clevis Hanger 3/8 (10) 3 1/2 (90) -
SD-HC Clevis Hanger 3/8 (10) 4 (100) -
SD-HC Clevis Hanger 1/2 (12) 2 1/2 (65) a
SD-HC Clevis Hanger 1/2 (12) 3 (80) a
SD-HC Clevis Hanger 1/2 (12) 3 1/2 (90) -
SD-HC Clevis Hanger 1/2 (12) 4 (100) a
SD-HC Clevis Hanger 1/2 (12) 5 (125) -
SD-HC Clevis Hanger 1/2 (12) 6 (150) -
SD-HC Clevis Hanger 1/2 (12) 8 (200) -
SD-HC Clevis Hanger 5/8 (16) 4 (100) -
SD-HC Clevis Hanger 5/8 (16) 5 (125) a
SD-HC Clevis Hanger 5/8 (16) 6 (150) a
SD-HC Clevis Hanger 5/8 (16) 8 (200) a
SD-HC Clevis Hanger 5/8 (16) 10 (250) -
SD-HC Clevis Hanger 5/8 (16) 12 (300) -
SD-HC Clevis Hanger 3/4 (20) 6 (150) -
SD-HC Clevis Hanger 7/8 (22) 8 (200) -

Remarks:
a.) Product marked with an ‘S’ designation identi es a speci c manufacturing location.
Details Company
Category Pipe Hangers, Shield Fire Safety and Security
Ltd
Clevis
Unit 3 Endeavor Drive, Basildon,
Class of Work 1951 - Pipe Essex, SS14 3WF, United Kingdom
hangers For AS United Kingdom
Sys http://www.shieldglobal.com

Approval Standard FM 1951, 1952,

1953 - Pipe
Hanger
Components for
Automatic
Sprinkler Systems

Certi cation Type FM Approved

Listing Country United Kingdom