Scribd
Upload
2 views

esp8266

Uploaded by

tranthienbao789
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
2 views

esp8266

Uploaded by

tranthienbao789
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

#define BLYNK_TEMPLATE_ID "TMPL6J9G5bUoD"

#define BLYNK_TEMPLATE_NAME "Smart Plant"


#include <LiquidCrystal_I2C.h>
#define BLYNK_PRINT Serial
#include <ESP8266WiFi.h>
#include <BlynkSimpleEsp8266.h>
#include <DHT.h>

// set the LCD number of columns and rows


int lcdColumns = 16;
int lcdRows = 2;

// set LCD address, number of columns and rows


// if you don't know your display address, run an I2C scanner sketch
LiquidCrystal_I2C lcd(0x27, lcdColumns, lcdRows);

char auth[] = "XgDn8yfVTWsotvF8_B_gdcyfyKX3EPRQ"; // Enter your Blynk


Auth token
char ssid[] = "07-05"; // Enter your WIFI SSID
char pass[] = "tido@1983"; // Enter your WIFI Password

DHT dht(D4, DHT11); // (DHT sensor pin, sensor type) D4 DHT11 Temperature
Sensor
BlynkTimer timer;

// Define component pins


#define SOIL_PIN A0 // A0 Soil Moisture Sensor
#define RELAY_PIN_1 D3 // D3 Relay
#define PUSH_BUTTON_1 D7 // D7 Button
#define VPIN_BUTTON_1 V12

int relay1State = LOW;


int pushButton1State = HIGH;

// Create variables for sensor values


double T, P;
char status;

void setup() {
Serial.begin(9600);
lcd.init();
lcd.backlight();

pinMode(RELAY_PIN_1, OUTPUT);
digitalWrite(RELAY_PIN_1, relay1State);

Blynk.begin(auth, ssid, pass, "blynk.cloud", 80);


dht.begin();

lcd.setCursor(0, 0);
lcd.print(" Initializing ");
for (int a = 5; a <= 10; a++) {
lcd.setCursor(a, 1);
lcd.print(".");
delay(500);
}
lcd.clear();
lcd.setCursor(9, 1);
lcd.print("W:OFF");

// Call the functions periodically


timer.setInterval(1000L, soilMoistureSensor); // Changed to 1000 ms to
avoid flooding
timer.setInterval(2000L, DHT11sensor); // Changed to 2000 ms
timer.setInterval(500L, checkPhysicalButton);
}

// Get the DHT11 sensor values


void DHT11sensor() {
float h = dht.readHumidity();
float t = dht.readTemperature();

if (isnan(h) || isnan(t)) {
Serial.println("Failed to read from DHT sensor!");
return;
}

Blynk.virtualWrite(V0, t);
Blynk.virtualWrite(V1, h);

lcd.setCursor(0, 0);
lcd.print("T:");
lcd.print(t);
lcd.setCursor(8, 0);
lcd.print("H:");
lcd.print(h);
}

// Get the soil moisture values


void soilMoistureSensor() {
int value = analogRead(SOIL_PIN);
value = map(value, 0, 1024, 0, 100);
value = (value-100)*-1; // Invert value to represent moisture
Blynk.virtualWrite(V3, value);
lcd.setCursor(2, 1);
lcd.print("S:");
lcd.print(value);
lcd.print(" "); // Add a percentage symbol
}
BLYNK_CONNECTED() {
// Request the latest state from the server
Blynk.syncVirtual(VPIN_BUTTON_1);
}

BLYNK_WRITE(VPIN_BUTTON_1) {
relay1State = param.asInt();
digitalWrite(RELAY_PIN_1, relay1State);
}

// Check the physical button state and toggle the relay


void checkPhysicalButton()
{
if (digitalRead(PUSH_BUTTON_1) == LOW) {// pushButton1State is used to
avoid sequential toggles
if (pushButton1State != LOW) {

// Toggle Relay state


relay1State = !relay1State;
digitalWrite(RELAY_PIN_1, relay1State);

// Update Button Widget


Blynk.virtualWrite(VPIN_BUTTON_1, relay1State);
}
pushButton1State = LOW;
} else {
pushButton1State = HIGH;
}
}

void loop() {
if (relay1State == HIGH) {
lcd.setCursor(9, 1);
lcd.print("W:ON ");
} else {
lcd.setCursor(9, 1);
lcd.print("W:OFF");
}

Blynk.run(); // Run the Blynk library


timer.run(); // Run the Blynk timer
}

You might also like