Amrutvahini College of Engineering, Sangamner

APPLICATION FORM
Date: 04 /07 /2023
To,
The Principal,
Amrutvahini College of Engineering,
Sangamner – 422 608

Sir,

With reference to your advertisement (mention advertisement

number given for the post here), I am submitting my application for the post of Professor / Associate Professor / Assistant
Professor (select one only in one application form, strike out whichever is not applicable) in Mechanical Engineering
Department (mention department here) for UG Course (select any one only in one application, strike out whichever is not
applicable). My resume with bio-data is given below.

Name (Dr./Mr./Mrs./Kum.) (IN BLOCK LETTERS): Dr. AHER VISHNU SADASHIVRAO

(Surname) (First Name) (Father’s Name)

Postal Address:
B4, AVCOE Staff Quarters, Amrutnagar, Ghulewadi
City: Sangamner District: Ahmednagar State: Maharashtra PIN: 422608

Permanent Address :
At: Jalgaon Po: Kadasakhar
Tal: Ashti District: Beed State: Maharashtra PIN: 414208 E-

mail Id: [email protected]

Telephone with STD Code (Land-Line/Fixed Wireless): --

Cell phone number (mobile): 9403776637, 9423386957

Date of Birth (DD/MM/YYYY): 21/03/1969

Age as on April 30, 2023 : 54 years 01 month(s) 09 day(s)

Whether you belong to Reserved Category? YES / NO (Strike out whichever is not applicable)
If yes above, tick mark the category to which you belong:

SC ST VJ-A NT-B NT-C NT-D EWS OBC SBC OPEN

√
(Self-attested photocopies of Caste, Caste Validity, and non-creamy layer certificate if applicable must be attached as a
proof in respective cases)

Nationality: India

Domicile status of Candidate: Maharashtra State / Other State (mention)

(Strike out whichever is not applicable)
Educational Qualifications:
(Attach attested copies of marks-sheet and certificates)

Percentage of
Name of the Subject /
Examination Year of Passing Marks / Grade/
Institute/University/Board Specialization/ Branch
CGPA
Shri Kholeshwar Vidyalaya, Marathi, Hindi, 1986 79.28
S.S.C. (X) Ambajogai Tal- Ambajogai Dist- English, Maths, Social
Beed Science, Science
Shri Yogeshwari Jr. College, Marathi, English, 1988 62.50
H.S.C. (XII) Ambajogai Physics, Chemistry,
Biology, Maths
Govt. College of Engineering, Mechanical 1993 62.06
BE Mechanical
Aurangabad Engineering
ME Mechanical PREC, Loni Design Engineering 2007 62.13
Amrutvahini College of Mechanical 2022 Awarded
Ph.D.*
Engineering, Sangamner
* Please specify name of the diploma / degree.

Experience (Teaching, Industrial and Research): Use separate sheet(s) if required

TEACHING EXPERIENCE: Total 27 years 09 months

Sr. No. Name of the Institute Post Held Period Number of years
01 Amrutvahini Polytechnic, Sangamner Lecturer 06/09/1995 to 04 years 11 months
25/08/2000 (05 academic years)
02 Amrutvahini College of Engineering, Lecturer 26/08/2000 to 05 years 11 months
Sangamner 31/07/2006
03 Amrutvahini College of Engineering, Sr. Lecturer 01/08/2006 to 01 year 05 months
Sangamner 31/12/2007
04 Amrutvahini College of Engineering, Assistant Professor 01/01/2008 to 00 year 07 months
Sangamner 03/08/2008
05 Amrutvahini College of Engineering, Assistant Professor 04/08/2008 to till 14 years 11 months
Sangamner (5th pay- UGC) date
equivalent to
Associate Professor
(7th pay)
(Attach attested copies of certificates from the employer(s))

INDUSTRIAL / RESEARCH EXPERIENCE: Total 01 years 00 month(s)

(Attach attested copies of certificates from the employer(s))
Sr.
Name of the Industry / Organization Post Held Period Number of years
No.
01 MSRTC Divisional Workshop, Beed Trainee Engineer Sept 1994 to 01year
Sept 1995

ADMINISTRATIVE EXPERIENCE:
Sr.
Designation Nature of Duties Period Number of years
No.
01 Chief Rector Look after Hostels 17/11/2008 to 07years 06 months
supervision/ 31/05/2016
management

Post PhD Teaching/Research Experience: Total 01 years 02 month(s)

Sr. No. Name of the Institute Post Held Period Number of years
01 Amrutvahini College of Engineering, Associate Professor 15/02/2022 to till 01 year 02 months
Sangamner date
(Attach attested copies of certificates from the employer(s))
RESEARCH PUBLICATIONS/CONTRIBUTIONS:
Number of Publications (National /International Peer Reviewed Journal):
Sr. Indexing of
No. Name of Journal
Author/s Title (with volume and year)
Journal (SCI/Scopus/UGC
Care)
01 Vishnu "An Experimental Investigation on the tribological performance Jurnal Scopus
Sadashiv Tribology
of UHMWPE composite under textured dry sliding conditions"
Aher,
Uddhav M. Jurnal Tribology, 24, (2020), 110-125.
Shirsat,
https://jurnaltribologi.mytribos.org/v24/JT-24-110-125.pdf
Vishnu D.
Wakchaure,
Venkatesh
M. A.
02 V. S. Aher, "Tribological Performance of PTFE with 40% Bronze against SSRN Research Gate,
U. M. Electronic Google Scholar
Different Surface Textured Patterns" SSRN online Journal, 2018.
Shirsat, G. Journal
J. Vikhe DOI: 10.2139/ssrn.3328459
Patil
03 V. S. Aher, "Effect of Texturing Patterns on Friction and Wear Behaviour of International Google Scholar
U. M. Journal of
Glass Fiber Filled Polyamide (PA66)" International Journal of
Shirsat, G. Applied
J.Vikhe Applied Engineering Research, ISSN 0973-4562, Vol. 13, Engineering
Patil Research
Number 5, (2018), 49-53.
https://www.ripublication.com/ijaerspl2018/ijaerv13n5spl_11.pdf
04 Gophane "An Investigation into Sliding Wear Behaviourof International Google Scholar
M. B., Aher Advanced
Polyoxymethelene on Surface Textured Counter Face"
V. S., G. J. Research
Vikhe Patil International Advanced Research Journal in Science, Engineering Journal in
Science,
and Technology, Vol. 3, Special issue 1, 2016.
Engineering
https://iarjset.com/upload/2016/si/ICAME-16/IARJSET- and
Technology
ICAME%2020.pdf
05 Gophane "Review on Investigation in Wear of polyoxymethylene International Google Scholar
M. B., Aher Journal of
composites by using tribology" International Journal of Modern
V. S., A. G. Modern
Tajane Trends in Engineering and Research, e-ISSN 2349-9745, 2015, Trends in
Engineering
1659-1663.
and
https://www.ijmter.com/published_special_issues/07-02- Research
2015/review-on-investigation-in-wear-of-polyoxymethylene-
composites-by-using-tribometer.pdf
06 Wakchaure "Impact of Dimple Density on Tribological Performance of PTFE International Google Scholar
P. B., Aher Journal of
Composite, International Journal of Engineering & Technology,
V. S., Engineering
Mishra A. ISSN: 2278-0181, Vol.2, Issue 1, 2013. &
K., Technology
https://www.ijert.org/research/impact-of-dimple-density-on-
Wakchaure
V. D. tribological-performance-of-ptfe-composite-IJERTV2IS1432.pdf
07 C Kulkarni, A Method to Calculate the Natural Frequency of the Timing SAE Scopus
VS Aher Belt Drive International
SAE Technical Paper -Technical
Paper
Y Pathak, Analysis of bearing cup assembly failure in drive shaft assembly Journal of Scopus
VS Aher Journal of failure analysis and prevention 13 (2), 188-193 failure
analysis and
prevention
08 GV Composite material: A review over current development and International Google Scholar
 Mahajan, automotive application journal of
VS Aher International journal of scientific and research publications 2 (11), scientific
1-5 and research
publications
09 GS The Effect of Dimple Density on Tribological Performance of IUP Journal Google Scholar
Pendbhaje, Polyamide (PA66) Composites of
VS Aher, IUP Journal of Mechanical Engineering 9 (4), 35 Mechanical
AK Mishra, Engineering
VD
Wakchaure

10 PG S.J. Performance analysis of cryoprocessed conventional HSS M2 drill Materials SCOPUS

Chede, and P/M HSS M3 TiN coated tap and its effect on the substructure Today:
M.K. Materials Today: Proceedings 65 (Part 1, 2022), 396-400 Proceedings
Chopra,
N.B.
Dubry,
V.S. Aher
11 P Dumbre, Structural analysis of steering knuckle for weight reduction International Google Scholar
AK Mishra, International journal of emerging technology and advanced journal of
VS Aher, engineering 4 (6 … emerging
SS technology
Kulkarni and
advanced
engineering
12 S Gandhe, An Analytical and Experimental Investigation of Welded Joint IUP Journal Google Scholar
VS Aher, Strength for Energy Storage Devices of
VD IUP Journal of Mechanical Engineering 14 (2), 42-74 Mechanical
Wakchaure, Engineering
MW
Ingole, SM
Surve
13 S Gandhe, Evaluation Of Metallographic Properties For Welding Of Aisi Journal on Google Scholar
VS Aher, 1040 Steel. Mechanical
VD Journal on Mechanical Engineering 10 (1) Engineering
Wakchaure
14 E Bayas, V Coupled field analysis of disc brake rotor International Google Scholar
Aher International Journal of Advanced Research in Science Journal of
Engineering and … Advanced
Research in
Science
Engineering
15 ES Gandhe, Influence of GMAW Process Parameters and Selection IJRASET Research Gate
VS Aher, Techniques on the Quality of a Welded Joint, Google Scholar
VD 2019
Wakchaure
16 VS Aher Impact Of Dimple Density On Tribological Performance Of PTFE IJERT Google Scholar
Composite
Vol. 2 Issue 1, January- 2013
17 ES Gandhe, Mathematical Analysis & FEA Simulation for Effect of Throat IJRSI Research Gate
VS Aher, Thickness on Mig Welded Joint Strength
VD 2019
Wakchaure
18 ES Gandhe, Parametric Optimization Of Mig Welding Process To Improve Its Tensile IJRD Research Gate
VS Aher, Strength
VD 2019
Wakchaure

Note: Attach the first page of the published journal paper, Link and Evidence of the indexing of the journal.

Number of Publications (National /International Peer Reviewed Conferences):

Sr.
Author/s Title of paper with year of publication Name of Conference
No.
01 V.S. Aher Effect of Contact Pressure on Tribological National Conference on
Properties of Delrin during dry Sliding, 2009 World Class
Manufacturing (WCM-
 2009)
02 V.S.Aher, Chaitnya kulkarni Transmissibility Analysis of Automotive National Conference on
Timing Belt Drive System, 2010 Recent Trends in
I.C.Engines and
Automobiles , RICA
2010
03 Chaitnya Kulkarni, V. S. Aher An Analytical Method to Identify the natural First International
Frequency of the Timing Belt Drive, 2011 conference on Surface
technologies, iCOST
2011
04 G.S. Pendbhaje, V. S. Aher Effect of Dimple Density on Tribological National level
Performance of Polyamide (PA66) Composites, Conference on Recent
2014 Trends in Science and
Engineering,(NCRTSE-
2014)
05 .A.L. Khatode, V.S.Aher Analysis of Wheel Rim Corneering Fatigue National Conference o
Test, JCON 2015 Emerginfg Trends &
Applications in
Engineering & Sciences
(ETA-EAS 2015)
06 M. B. Ghophane, V.S.Aher Review on Investigation in Wear of 4 th International
Polyoxymethelene Composites by using Conference on Recent
Tribometer, ICRTER’2015 Trends in Engineering &
Technology (ICRTET
2015)
07 P.P. Bhandari, V.S.Aher Investigation of Tribological Behaviour of Two days National
Graphene, MOMENTUM-18 Conferences on
Advances in Engineering
& Science (NCAIE&S-
18)
08 V.S. Aher, U.M. Shirsat, G.J. Vikhe Effect of Texturing Patterns on Friction and International Conference
Patil Wear Behaviour of Glass Fiber Filled on Mechanical and
Polyamide (PA66), ICMMSE:IR 2018 Materials Science
Engineering Innovation
and Research (ICMMSE:
IR)-2018.
09 V.S. Aher, U.M. Shirsat, G.J. Vikhe Tribological Performance of PTFE Filled with An International
Patil 40% Bronze against Different Surface Textured Conference on Tribology,
Patterns TRIBOINDIA-2018
13th -15th December
2018, VJTI, Mumbai,
India
Number of Books/Book Chapter published/under publication:
Sr. Publisher with year
Title of Book/Book Chapter Discipline ISBN/ISSN No.
No.
01 ASM Failure Analysis Case Histories ------ ASM International 978-1-62708-241-
Handbook of Case Histories in Failure Volume 3, 2019 9
Analysis

Number of Projects (completed/ in progress):

Sr. Granting Agency
Title of Project Amount Granted Period
No.
01 An Investigation of Tribological 2,40,000=00 BCUD, SPPU, Pune 2013-15
Performance of Engineering Plastics and Proposal No:
their Composites under Dry and wet 13ENG000610
Sliding Conditions
Number of PG students guided (completed):
Sr. Year
No. Name of Student Dissertation Title
01 Mr. Kulkarni Chaitanya Analysis of Timing Belt Drive 2011
Ravindra
02 Mr. Fargade Sandip Investigation of Friction and Wear behavior of Self 2011
Chandrabhan Lubricating Bronze Field PTFE Composites
03 Mr. Varpe Babasaheb Fatigue Life Analysis of Low Plasticity Burnished AISI 1045 2011
Kisan Steel in Corrosion
04 Mr. Bagate Amol Vinayak Automotive Differential Gear and Axle Shaft Analysis 2013
05 Mr. Wakchaure Pravin Effect of Surface Texturing on Tribological Properties of 2013
Baban PTFE Composite
06 Mr. Pathak Yogesh Analysis of Bearing cup Failure in Drive Shaft Assembly 2013
Kamlakar
07 Mr. Chede Sachin J. Performance evaluation of cryogenically treated high speed 2013
steel tools
08 Mr. Bayas Eknath Coupled Field Analysis of Disc Brake Rotor 2013
Tryambakrao
09 Mr. Lokare Nitin Test Based approach to Determine Primary System 2013
Characteristics for Optimization of Tuned Mass Absorber
10 Mr. Jambukar Vikas Kisan Design and validation of compact hydraulic fan drive motor 2014
for efficient engine cooling
11 Mr. Mankar Rajkumar Design & Performance analysis of support bar of coriolis 2014
Laxman flow meter
12 Mr. Ghule Vikram Vibration analysis of Machine Too 2014
Macchindra
13 Mr. Kiran Gangadhar Optimization of robot roller hemming 2014
Shinde
14 Mr. Khatode Amol Laxman Stress Analysis of wheel rim 2015
15 Mr.Pendbhaje Gaurav Effects of surface texturing on tribological properties of 2015
Sanjay polyamide (PA66) composites
16 Mr. Gophane Madhav An investigation into sliding wear behavior of 2016
Bhagwat polyoxymethylene on surface textured counterface
17 Mr. Pagar Mahesh Bapurao Tool Design and analysis of injection molding 2016
18 Mr. Nashikkar Anup Simulation and optimization of sheet metal forming using 2016
Subhash FEM
19 Mrs. Chine Pramila Analysis of Die Block Failure in cam piercing tool for lower 2016
Suryakant control arm
20 Mr. Baravkar Vinaykumar Design and optimization of gripper engine block manipulator 2016
C.
21 Mr. Ambre Sunil An experimental investigation of tribological performance of 2016
Bhimashankar UHMWPE composites under different sliding conditions
22 Miss. Navale Rutuja Effect of texturing patterns on friction and wear behavior of 2016
Annasaheb glass fiber filled polymide (PA66) and Bronze filled PTFE
composites
23 Mr.Gawali Shambhuraje Condition monitoring technique to investigate gear fault in 2017
Narayan spur gearbox by using vibration analysis
24 Mr.Jondhale Dattatraya Experimental evaluation of clutch plate material by 2017
Bhikaji tribological properties using tribometer
25 Mr.Mahajan Gokul Vasant Fabrication of jute-pp and wood stock-pp composites and 2017
comparative investigation of their physic-Mechanical
Properties
26 Mr.Deshmukh Mahendra Tribological Behavior of PEEK composites for Journal 2017
Ganpat Bearing Application
27 Mr.Thorat Satyajit P. Effect of lubricants on tribological properties of bronze filled 2017
PTFE
28 Mr.Prasad Pandurang Design and Optimization of Four Cylinder Engine Crankshaft 2018
Gaware
29 Mr. Bhandari Pranav An Investigation of Tribological Behaviour of Graphine. 2018
Prakash
30 Mr. Landge Shubham Design and development of floating fulcrum based variable 2018
Mohan discharge radial piston pump for MQL system
31 Miss. Bodake Priyanka Design and analysis of composite drive shaft for four wheeler 2018
Madhav
32 Mr. Haral Saurabh Shivaji Paramatric optimization in CNC turning process for surface 2019
roughness & MRR using taguchi method
33 Mr. Gandhe Saurabh Optimization of MIG welding parameters improving strength 2020
Shashank of welded joints.
34 Mr. Ghuge Sampat Sudam Improving the performance of tool in high speed drilling. 2020
35 Mr.Waman Santosh B. Friction and Wear Performance of PTFE and Its Composites 2021
under Dry Condition
36 Mr. Pratik Shelke Tribological Investigation of Engine Lubricant by Adding 2023
Graphene Nano particles
Number of Ph.D. guided (completed):
Sr. Name of Research Year
No. Scholar Thesis Title
--- ---- ----

Note: Attach PhD Guide Recognition Letter, Notification and PhD Degree Certificates of the Scholars Guided.

IPR details
Sr. No. IPR Details Title Publication details IPR Granted
Details
--- --- ---- ------
---- ---- ---- ----

Experience of organizing events such as workshops, seminars and conferences:

Sr.
No. Name of workshop/ seminar/ conference Details
01 National Seminar on Advances in New Organized two days national seminar as a Organizing Secretary in
Engineering Composite materials association with AICTE, New Delhi on 23-24 Sept.2009
02 Five Days International workshop on Organized and worked as Coordinator for Five Days International
Industrial Tribology Workshop on Industrial Tribology sponsored by SPPU from January
15-19,2019
03 MECHPGCON-2019 Organized and worked as a Conference Joint Secretary for
MECHPGCON-2019 at AVCOE, Sangamner under the aiges of BOS
Mechanical Engineering, SPPU on June 21-22,2019
04 International workshop on Thermal Organized and worked as a organizing committee member for
Engineering: Theory and Applications International workshop on Thermal Engineering: theory and
2020 applications organized at Dept. of Mechanical Engineering, AVCOE,
Sangamner sponsored by SPPU from February17-21,2020

Demonstrated Experience in leadership:

A. Contribution to Teaching/ Academic Environment/ Institutional/ Department Corporate Life--
B. Member of professional bodies and awards- ISTE, MIE
C. University recognition and related work- PG Teacher Recognition
D. Laboratory and Infrastructure development--
E. Any other significant contribution/ information---PhD Coordinator of Mechanical Engineering Department,
Research Center.

DECLARATION:

I hereby declare that all statements made in this application are true, complete, and correct to the best of my knowledge and
belief. I understand that in the event of any information being found false or incorrect at any stage or not satisfying the
eligibility criteria according to the requirements of the concerned advertisement, my candidature / appointment is liable to be
cancelled / terminated.

Place:
Date: Signature of the Candidate

(Candidates may submit additional information, along with necessary photocopies, which he/she feels suitable for
applying to the post, as additional pages along with this application form.)

Candidates must attach the self-attested photocopies of the all supporting documents with application form –
a. Documents for administrative scrutiny –
i. Document in support of Date of Birth.
ii. Copy of Government Gazette or any other appropriate certificate in case of change in name.
iii. No objection certificate from present employer.