Computer Part – 1

1|Page
Computer Part – 1

Computer science
Unit 1
1. A special device that is used for playing computer games is:
(A) Keyboard (B) Mouse (C) Joystick (D) Light Pen
2. Types of application software are:
(A) 5 (B) 4 (C) 3 (D) 2
3. A set of instructions of computer are:
(A) Hardware (B) Documents (C) CPU (D) Software
4. Which of the following is an example of system software:
(A) Spread-sheet (B) Text Editor (C) Operating System (D) MS-Word
5. Which of the following is not an output device?
(A) Speaker (B) Printer (C) Plotter (D) Scanner
6. The Keyboard format that is most commonly used is the:
(A) QWERTY (B) Dvorak (C) TWITTER (D) SPLITTER
7. Printed image can be input into digital form inside the computer using a:
(A) Stylus (B) Scanner (C) Mouse (D) Magnetic strip card
8. Laser Printer is an example of:
(A) Non impact (B) inkjet (C) Impact (D) Dot Matrics
9. The dots that compose the image of a digital photograph are called?
(A) Dot matrix (B) Resolution (C) Pixels (D) Digital Points
10. --------------- is not an output device.
(A) Speaker (B) Printer (C) Plotter (D) Scanner
11. Plotters of:
(A) Two types (B) Three types (C) Four types (D) Five types
12. Which of the following is an impact printer?
(A) Laser Printer (B) Dot Matrix (C) inkjet (D) NONE
13. The circuit board that connects the monitor to computer is called:
(A) Video Adapter (B) monitor link (C) digital Cable (D) Light Pen
14. Which typed of Printer forms images one Character at a time as print head moves across the paper?
(A) Inkjet (B) Dot-Matrix (C) Laser (D) Daisy Wheel
15. The Output of printer is called:
(A) Hard copy (B) Graphics (C) Multimedia (D) Soft copy
16. The Individual images that makeup a video is called:
(A) Frames (B) Pixels (C) Dots (D) Digits
17. How many bits are in one byte?
(A) 2 (B) 8 (C) 10 (D) 12
18. 3 Bytes is equal to:
(A) 16 bits (B) 20 bits (C) 24 bits (D) 30 bits
19. Collection of 4 bits is called:

(A) Byte (B) 1 kb (C) 1 MB (D) Nibble

20. One MB is equal to:
(A) 1 KB (B) 100 KB (C) 1024 Bytes (D) 1024 KB
2|Page
Computer Part – 1
21. Information technology is a combination of:
(A) Computing and mechanical technology
(B) Computing and mechatronics technology
(C) Computing and communication technology
(D) Computing and electrical technology
22. A collection of raw fact and figure is called:
(A) Data (B) Information (C) Processing (D) Procedure
23. Which operation is not performed by computers?
a) Inputting b) Processing c) Controlling d) Understanding
24. The electronic circuit that executes computer instruction is called:
a) Keyboard b) CPU c) Monitor d) Hard Disk
25. Hardware components that permanently hold data and programs is called:
a) Primary storage b) Temporary storage c) Secondary storage d) CPU
26. The right to use the software are on the computer is called:
a) Software piracy b) Intellectual property right c) Software license
d) Software copyright
27. System requirements are created during:
a) Analysis b) Preliminary c) Design d) Development investigation
28. The last stage of SDLC is:
a) System development b) System maintenance c) System implementation
d) Execution in computer
KEY
1 C 2 D 3 D 4 C 5 D 6 A 7 B 8 A 9 C 10 D
11 A 12 B 13 A 14 D 15 A 16 A 17 B 18 C 19 D 20 D
21 C 22 A 23 D 24 B 25 C 26 C 27 A 28 B
UNIT – 1: SHORT QUESTIONS:
1. Define Software.
2. Differentiate between data and information.
3. Define Utility programs.
4. What is touchpad or trackpad?
5. Write the use of stylus.
6. What is magnetic strip card?
7. State basic use of Mouse.
8. List some examples of pointing devices
9. . What is meant by plotter?
10. What do you mean by implementation?
11. Define System Software.
12. What is Information?
13. Define barcode.
14. State basic use of digital camera.
15. How is printer resolution measured?
16. What is video Adapter?
17. Write two differences between Soft copy and Hard copy.
18. Define SVGA.
19. Define Hard Copy output.

3|Page
Computer Part – 1
20. Define bit and byte.
21. What is meant by information technology?
22. Define Application software.
23. Explain the concept of pen-based system.
24. What is the use of MICR?
25. Define Smart Card.
26. Convert 220 MB of memory into bytes.
27. List different components of SDLC.
28. What is System? List different Components of System?
29. Why is it important to test a system before use?
LONG QUESTIONS
1. What is software? Explain different types of software?
2. What is source data entry devices?
3. What is display screen? Explain its types?
4. What is impact and non-Impact printer and its types?
5. What is SDLC? Explain its components?

4|Page
Computer Part – 1

Unit 2
1. Software to pursue the internet is called:
(A) Gateway (B) Browser (C) EFT (D) Tele conference
2. Terminal is a:
(A) Device to give power supply (B) Point at which data enters or leaves the computer
(C) The last instruction in a program (D) Any input / output device
3. A software that is used for transferring files from one computer to another:
(A) FTP (B) ELD (C) Token (D) Ethernet
4. Copying data from internet to computer is called:
(A) Uploading (B) Downloading (C) Transferring (D) None of these
5. The Standard protocol for the internet is:
(A) TCP (B) IP Address (C) IP Protocol (D) TCP / IP
6. Identify LAN's Protocol:
(A) TCP / IP (B) UDP (C) Ethernet (D) HTTP
7. The set of rules to exchange data in a communication network is called:

(A) Gateway (B) Procedure (C) Protocol (D) Token

8. Identify the LAN Protocol:
(A) Ethernet (B) TCP/IP (C) HTTP (D) FTP
9. A Device that connects multiple networks using similar or different protocol is a:
(A) Router (B) Bridge (C) Gateway (D) Repeater
10. Which is a communication device?
(A) USB (B) UTP (C) Router (D) Ethernet
11. Which Type of Network is the internet?
(A) LAN (B) MAN (C) WAN (D) Both B and C
12. MAN stands for:
(A) Metropolitan Area Network (B) Market Area Network
(C) Metropolitan Arranged Networks (D) Manufactured arrangement of networks
13. Which is not network Type?
(A) LAN (B) MAN (C) WAN (D) NAN
14. ---------------------- is an example of de-facto standard:
(A) ISO (B) ANSI (C) SNA (D) IEEE
15. A network that places all nodes on a single cable is called:
(A) Star (B) Mesh (C) Ring (D) Bus
16. FDDI is a:
(A) Ring network (B) Star network (C) Mesh Network (D) Bus network
17. All physical media deals within:
(A) Application layer (B) Transport layer (C) Presentation layer (D) Physical layer
18. The physical layout of network is known as:
(A) Topology (B) Session (C) Link (D) Style
19. Which is an example of de-facto protocol?
(A) SNA (B) ISO (C) IBM (D) SNA
20. One or more computers connected to a hub are:
(A) Ring network (B) Bus network (C) Star network (D) Mesh network
21. Each computer on a network is called:
a) Node b) Bus c) Termination d) Point
22. Each computer on a computer network is called a:
5|Page
Computer Part – 1
a) Link b) Code c) Node d) Mode
23. The process of sharing information among various members of workgroup through computer network
is called:
a) Groupware b) Collaborative computing c) Workgroup computing d) Both B & C
24. The workgroup computing is also called _________
a) Groupware b) Collaborative computing c) Workgroup d) Parallel

25. An internet software that is used for transferring files from one computer to another:
a) FTP b) ELD c) Token d) Ethernet
26. Transferring information from computer to internet is called:

a) Downloading b) Uploading c) Pasting d) Transferring

27. Which program is used to connect to a remote computer or internet?

a) WWW ( World Wide Web ) b) FTP c) E.mail d) Telnet

KEY
1 B 2 B 3 A 4 B 5 D 6 C 7 C 8 A 9 A 10 C
11 C 12 A 13 D 14 A 15 D 16 A 17 D 18 A 19 C 20 C
21 a 22 b 23 d 24 b 25 a 26 b 27 d
UNIT - 2: SHORT QUESTIONS:
1. Give two uses of Email. 15. Write two disadvantages of Peer-to-Peer
2. Differentiate between uploading and model.
downloading. 16. Define Star topology.
3. What is DSL? 17. What do you mean by CSMA / CR?
4. What is ARC net? 18. Why terminators are used in bus topology?
5. List any two LAN (Local Area Network) 19. What is repeator?
protocols. 20. Write the function of Physical layer of OSI
6. Write the names of three LAN protocols. Model.
7. Define Ring topology. 21. What is uploading and downloading of
8. Define Network Topologies. data.
9. Enlist different layers of OSI Model. 22. What is E-mail?
10. Write the use of server in Computer 23. What does a gateway means?
networks 24. Define the term Token.
11. Define the term "INTRANET". 25. Give two reasons for the importance of
12. What is network interface card? computer network.
13. What do you mean by ISDN? 26. Write the two uses of Server.
14. Distinguish between LAN and WAN. 27. What is Defacto Standard?
28. Write two function of Network Layer.
29. Write two functions of session layer of OSI Model.
LONG QUESTIONS
1. What is network models? Explain its types?
2. What is network topology? Explain all of them?
3. Explain LAN protocols?
4. Explain OSI MODEL? ALSO explain its all layers?

6|Page
Computer Part – 1

Unit 3
1. Data Communication requires only:
(A) Sender (B) Receiver (C) Transmission Medium (D) All of these
2. Data processing is also known as:
(A) Accuracy (B) Computing (C) Speed (D) Merging
3. The devices that receives data:
(A) Source (B) Sink (C) Transmitter (D) Encoder
4. Analog signals are measured in:
(A) Hertz (B) Volt (C) Digit (D) Watts
5. Amplitude is the characteristic of:
(A) Digital signal (B) Analog signal (C) Parallel signal (D) Serial transmission
6. The Music and speech represent data:
(A) Images (B) Text (C) Numeric (D) Audio
7 Data shown on display unit or played through audio is called:
(A) Hard copy (B) Soft copy (C) Shared copy (D) Photocopy
8 How many Character ASCII 7 bit code represent?
(A) 128 (B) 256 (C) 500 (D) 364
9 BCD code is a ___________ bit code:
(A) 4 (B) 8 (C) 15 (D) 32
10 In EBCDIC, How many bits to represent characters are used?
(A) 2 (B) 4 (C) 6 (D) 8
11 Which of the following coding schemes uses 16-bit code?
(A) BCD (B) ASCII (C) EBCDIC (D) Unicode
12. Which of the following coding scheme used by IBM?
(A) BCD (B) EBCDIC (C) ASCII (D) Unicode
13. A Telephone Conversation is an example of:
(A) Full duplex Transmission (B) Half Duplex Transmission (C) Simple Transmission (D) Duplex Transmission
14. Communication between computer and keyboard involves:
(A) Simplex (B) Half Duplex (C) Full duplex (D) None
15. A television broadcast is an example of:
(A) Full duplex (B) Half Duplex (C) Simplex (D) mid-Duplex
16. Transmission permitting data to move only one way at a time is called:
(A) Half duplex (B) Simplex (C) Full Duplex (D) Start/Stop
17. ______________ is the fastest communication mode:

(A) Half Duplex (B) Full duplex (C) Simplex (D) duplex
18. The communication channel can be divided into:
(A) Five types (B) Four types (C) Three types (D) Two types
19. Which of the following is not a communication media?
(A) Twisted (B) UTP (C) Microwave (D) Modem
20. Which communication medium requires line-of-sight?
(A) Microwave (B) Fiber-wave (C) Twisted-pair (D) Coaxial
21. The process of transferring data from one location to another is called.
a) Data processing b) Data communication c) Data computing d) Data sequencing
22. The devices that receive data:

7|Page
Computer Part – 1
a) Source b) Sink c) Transmitter d) Encoder
23. A signal is a representation of:
a) Light wave b) Heatwave c) Sun wave d) Full wave
24. The number of times a wave repeats during a specific time interval is called:
a) Pulse b) Amplitude c) Frequency d) Oscillation
25. Modern computers can perform or process at:
a) Per nano second b) Analog c) Per micro second d) None of these
26. A communication signal in the form of continuous wave called:
a) Digital b) Modulation c) Analog d) None of these
27. Which of the following type of data is used to displaying action and movement?
a) Audio b) Video c) Image d) Text

KEY
1 D 2 B 3 B 4 B 5 B 6 D 7 B 8 A 9 A 10 D
11 D 12 C 13 A 14 A 15 A 16 B 17 B 18 D 19 C 20 D
21 b 22 b 23 a 24 c 25 a 26 c 27 b
Unit – 3: SHORT QUESTIONS:
1. Define digital Signals.
2. Differentiate between analog and digital signals.
3. Give two examples of analog data.
4. Define Signal.
5. Define Unicode.
6. What is meant by full duplex mode of data transmission?
7. Define Serial Data Transmission.
8. Define Broad band.
9. Why data transfer instruction are used? List two features of Modem.
10. What is the Role of Sender in Data Communication?
11. Define Encoder and Decoder. 16. Distinguish between baseband and
12. Define Decoder. broadband.
13. What is BCD Code? 17. Define mobile communication.
14. What is parallel data transmission? 18. How does microwave system work?
15. Compare serial and parallel transmission.
19. State the purpose of external modem. List out different elements of data Communication.
20. List two characteristics of Analog Signals.
21. Describe data representation in computer.
22. Define ASCII Code.
23. Explain the term "Baseband".
24. Define Bandwidth.
25. Write a least two characteristics of fiber optics.
26. Write two names of unbounded media.
27. What do you know about internal modem?
LONG QUESTION
1. What is data communication? Explain its all components?
2. What is encoding scheme? Explain all of them?
3. Difference between synchronous and unsynchoronous?
4. What is guided and unguided media?
Unit 4

8|Page
Computer Part – 1
1 MICR stands for:

9|Page
Computer Part – 1
(A) Magic ink character Redo (B) Magnetic ink character recorder
(C) Magnetic ink character Redo (D) Magnetic ink character recognition reader
2 Which is not included in document management system?
(A) Word processing (B) Desktop Publishing
(C) Reprographics (D) E-Shipping
3 Which is not included in DMS?
(A) Word processing (B) Desktop Publishing
(C) Reprographics (D) E-Shaping
4 Many banks provide the facility of:
(A) CAD (B) CAM (C) ATM (D) CBT
5 Process of automating office tasks using computer is:
(A) Office Support (B) Office Automation
(C) Data Management (D) Reprographics
6 _____________ is related to Business:
(A) Bank (B) Stock Exchange (C) Marketing (D) All of these
7 The Process of producing multiple copies of document is called:
(A) Reprographics (B) Word (C) Spread Sheet (D) Image
8 Typically, an ATM can be used to:
(A) Keep records (B) Make budgets
(C) With draw Money (D) Watch Movies
9 Which one is an Automatic programmable machine:
(A) CAD (B) CAM (C) CBT (D) ROBOT
10 Which is used to withdraw money?
(A) CAD (B) CAM (C) ATM (D) ROBOT
11 Many Products are designed by using:
(A) CAD (B) ROBOT (C) CAM (D) ATM
12 Many industries are designing products by using:
(A) CAD (B) ROBOT (C) CAM (D) ATM
13 The fly-by-wise system is used in:
(A) Medical field (B) Airline (C) Educated field (D) Business Field
14 CBT stands for:
(A) Computer Based Trade (B) Computer Based Training
(C) Certificate Based Training (D) Computer Basic Training
15 Computer Based weather forecasting depends on accurate collection of data from:
(A) Weathers stations (B) Television (C) Radar (D) Antenna
16 CBT Software is used in:
(A) Education (B) Industry (C) E-Commerce (D) Business
17 Which one is an example of use of computer in education?
(A) CAM (B) CAD (C) CAL (D) CDL
18 SUPARCO department gives information about:
(A) Robot (B) Airline (C) Chatting (D) Weather
19 The software which is used to control all parts of manufacturing process is called:
(A) CAD (B) MICR (C) CAM (D) ATM
20 Modern Computer can perform calculations or process:
(A) Per Second (B) Per minute (C) Nino Second (D) None
21. Which is not included in document management system?
a) Word processing b) Desktop Publishing c) Reprographic d) E - Shopping
22. Which of the following is related to business?
a) Marketing b) Stock Exchange c) Banks d) All of these
23. Process of automating office tasks using computer is:
a) Office Support b) Office Automation c) Data Management
d) Reprographics
10 | P a g e
Computer Part – 1
24. Which of the following is not an example of E-Commerce?
a) Electronic Banking b) Online Chatting c) Online Education d) E - Shopping
25. Electronic banking is also known as:
a) Cyber Banking b) Offline Banking c) Interactive Banking d) Global Banking
26. The process of producing multiple copies of a document is called:
a) Reprographics b) Word c) Spread Sheet d) Image

27. An Automated teller machine can be used for:

a) Keeping records b) Making budgets c) Watching Movies
d) Withdraw Cash
KEY
1 D 2 D 3 D 4 C 5 B 6 D 7 A 8 C 9 D 10 C
11 A 12 A 13 B 14 B 15 A 16 A 17 C 18 D 19 C 20 C
21 d 22 d 23 b 24 c 25 a 26 a 27 d
UNIT – 4: SHORT QUESTIONS:
1. Define desktop publishing.
2. Define the term video conferencing.
3. Give two role of E-commerce in our daily life.
4. Write some application of ROBOTS.
5. Differentiate between Computer-Aided Design and Computer-Aided Manufacturing.
6. How CAM works?
7. Write two benefits of computer in medical field.
8. What do you mean by CBT?
9. What is online education?
10. Explain weather forecasting.
11. How computers are used in marketing?
12. What is the use of message handling system?
13. Describe the importance of using computer.
14. How computer can be used in departmental store?
15. What is the use of computer in stock exchange?
16. How computers can be used in airline system?
17. How computer can be useful in weather forecasting?
18. What is video conferencing?
19. What are the uses of Computer in industry?
20. What is robot?
21. Give any two examples of computer speed.
22. State the purpose of ATM.
23. Write the purpose of document management system.
24. Define repragraphics.
25. What do you know about electronic banking?
26. Explain computer Aided design.
27. What is computer Simulation?
28. Define computer aided learning.

11 | P a g e
Computer Part – 1

Unit 5
1 The "Brain" of Computer that executes the instruction is called:
(A) CPU (B) RAM (C) Motherboard (D) System Unit
2 CPU includes all of the components except:
(A) Primary storage (B) ALU (C) Control Unit (D) Register
3 ALU has __________ Units:
(A) 2 (B) 3 (C) 4 (D) 5
4 The Cells of memory are logically organized into group of:
(A) 8 bits (B) 12 bits (C) 32 bits (D) 4 bits
5 Which of the following is not the component of CPU?
(A) Primary Memory (B) Register (C) Control Unit (D) ALU
6 Memory is made up of:
(A) Set of wires (B) Set of circuits (C) Cells (D) BIOS
7 The RAM stands for:
(A) Random Access Memory (B) Road Access Memory
(C) Reading Available Memory (D) Random access Mode
8 Temporary storage Area within CPU is called:
(A) Register (B) ROMS (C) RAM (D) None of these
9 Which type of memory is nonvolatile and cannot be changed by the user:
(A) SPAM (B) DRAM (C) ROM (D) None of these
10 CPU consists of the following parts:
(A) CU and Main Memory (B) Control Unit and ALU
(C) Main Memory yard Storage (D) Operating System and Application
11 Which of the following is not a type of RAM?
(A) Quick Ram (B) Dynamic Ram (C) Stable RAM (D) Both A and C
12 A Bus having 64 lines can carry data of:
(A) 32 bit (B) 64 bit (C) 16 bit (D) 48 bit
13 Which of the following is not a type of a BUS?
(A) System Bus (B) Data Bus (C) Address Bus (D) Times Bus
14 Which component is used to connect different part of the computer together?
(A) Bus interconnection (B) Control Unit (C) Main Memory (D) None
15 Electric path used to transfer data is called:
(A) Computer architecture (B) Computer organization
(C) Computer Bus (D) Computer clock
16 Which bus allows the processor to communicate with peripheral devices?
(A) System Bus (B) Expansion Bus (C) Data bus (D) Control bus
17 Which bus allows the processor to communicate with peripheral devices?
(A) System Bus (B) Expansion Bus (C) Data bus (D) Control bus
18 Which register holds the address of the next instruction to be fetched for execution?
(A) PC (B) IR (C) MAR (D) MBR
19 ______________ is not a kind of register.
(A) Flag (B) Segment (C) Accumulation (D) Math-Co-Processor
20 The extension of an executable file is:
(A) xls (B) doe (C) ext (D) exe
21. CU stands for:
a) Control unit b) Cache unit c) Calculating unit d) Com unit
22. An important characteristic of RAM is:
a) Read Only b) Write Only c) Not Volatile d) Volatile
23. Memory is made up of:
a) Set of wires b) Set of circuits c) Cells d) BIOS
24. Which Memory is used to speed up the computer processing?

12 | P a g e
Computer Part – 1
a) Cache b) ROM c) BIOS d) FRAM
25. The idea of sharing a program in memory was given by:
a) John Von Neuman b) Dr . Abdul Salam c) Dr . Abdul Qadir d) Pascal
26. Another name of main memory is:
a) Primary storage b) Secondary memory c) Permanent Memory d) Tape storage
27. Which component is used to connect different part of the computer together?
a) Bus interconnection b) Main Memory c) Control Unit d) None of these
KEY
1 A 2 A 3 A 4 A 5 A 6 C 7 A 8 A 9 C 10 B
11 D 12 B 13 D 14 A 15 C 16 A 17 A 18 A 19 C 20 D
21 a 22 d 23 c 24 a 25 a 26 a 27 a
UNIT – 5: SHORT QUESTIONS:
1. Define Arithmetic Unit and Logic Unit of CPU.
2. Why RAM is called Random Access Memory?
3. Why does SRAM use less power than DRAM?
4. What is ROM?
5. How is data transferred from peripheral devices to computer?
6. What is Instruction set?
7. Describe Fetch-Decode Execute cycle of CPU.
8. What is GUI?
9. Differentiate between source code and object code.
10. Define interpreter
11. Write any two funs performed by ALU.
12. What is motherboard?
13. Write is difference between primary memory and cache memory.
14. List out different unit of CPU.
15. What is DRAM?
16. Define Arithmetic Unit and Logic Unit of CPU.
17. How does bus width affect data transfer?
18. Define stack.
19. Define instruction register.
20. How an assembler work?
21. Write functions of Control Unit.
22. Why RAM is called volatile?
23. Why RAM is called Random Access Memory?
24. Define EPROM.
25. What is DMA?
26. What is segment registers?
27. What is code segment Register?
28. Differentiate between AL and AH Register.
29. What is compiler?
LONG QUESTION
1. What is computer architecture? Explain computer components?
2. Difference between RAM and ROM?
3. Explain bus system?
4. What is programming languages? Explain all of them?
5. What is language translators? Explain its types?
6. What is operating system? Explain its all functions?
7. Define and explain fetch – decode – execute cycle of CPU.

13 | P a g e
Computer Part – 1

Unit 6
1 Freely distributed Software without violating copy-right laws are called:
(A) Shareware (B) Public Domain (C) Copy protected (D) None
2 The Virus which is activated on a specific data and time is called:
(A) Chernobel (B) Logic Bomb (C) Redlof (D) Trojen Horse
3 Which is not biometric technique?
(A) Badge (B) Retina (C) Face (D) Palm Print
4 Which of the following is not Antivirus program?
(A) NOD 32 (B) Dr. Dalman (C) McAfee (D) Logic bomb
5 A secret word or Number to be typed in on a key board before any activity can take place is called:
(A) Password (B) Username (C) Data encryption (D) Biometric
6 McAfee is a:
(A) Virus (B) Antivirus (C) Hacker (D) Warm
7 Which is a biometric technique?
(A) Retina (B) Palm Print (C) thumb impression (D) All
8 Another name for antivirus software is:
(A) Worm (B) Trajan Horse (C) Vaccine (D) Rudolf
9 Virus are transferred from one computer to another due to:
(A) Exchange data and program (B) Exchange of displaying screen
(C) Dust in room (D) High temperature of room
10 Which is not an antivirus program?
(A) Noters (B) Redlof (C) Dr.salman (D) MCAfee
11 Additional copy of your data is called:
(A) Backup of data (B) Taking of data (C) Moving of data (D) Forwarding of Data
12 A virus that replicated itself is called:
(A) Buy (B) Vaccine (C) Bomb (D) Worm
13 Which one of the following is not a cause of virus?
(A) E-mail (B) Network (C) Pirated Software (D) None
14 How a virus reaches from on computer to another?
(A) Data is exchanged between computers (B) Exchange of displaying screen
(C) Exchange of keyboard (D) Exchange of printer
15 Another name for free software is:
(A) Encrypted software (B) Copy protected software
(C) Public domain software (D) Shareware
16 Which of the following is not an antivirus program?
(A) Rudolf (B) Norton (C) Dr. Solman (D) McAfee
17 Security protection for personal computers include.
(A) Internal components (B) Lock and cables (C) Software (D) All of these
18 A right of person to keep his personal information away from the unauthorized access is called:
(A) Piracy (B) Privacy (C) Personal issue (D) Assets
19 Which of the following is the most divesting loss to computer?
(A) Loss of hardware (B) Loss of data (C) Loss of software (D) Loss of printouts
20 The right to use the software on the computer is called:
(A) Software copyright (B) Software license (C) Software Piracy (D) Software privacy
21. ____ is not a biometric technique.
a) Badge b) Retina c) Face d) Palm Print
22) The measurement of things such as fingerprints and retinal scans used for security access is called:
a) Biometrics b) Computer Security c) Bio measurement d) Copyright
23) A program that disturbs / interferes with the working of a computer system is called:
(a) Bacteria b) Anti - virus c) Virus d) Freeware
24. The virus which activates on a specific data and time is called:
a) Chernobyl b) Logic Bomb c) Rudolf d) Trojan Horse

14 | P a g e
Computer Part – 1
25) Trojan Horse is a / an
a) Antivirus b) Virus c) Business Software d) Hardware
26. Additional copy of our data is called:
a) Backup of data b) Taking of data c) Moving of data d) Forwarding of data
27. Software that is available free for a limited period is called ________
a) Freeware b) Shareware c) Groupware d) Netware
KEY
1 D 2 B 3 A 4 D 5 A 6 B 7 C 8 C 9 A 10 B
11 A 12 D 13 D 14 A 15 C 16 A 17 D 18 B 19 B 20 A
21 a 22 a 23 c 24 b 25 b 26 a 27 b
UNIT – 6: SHORT QUESTIONS:
1. Define Pirated Software.
2. How Pirated Software spread Viruses?
3. How does virus spread through email?
4. What is logic bomb?
5. How does a boot Sector Virus Work?
6. List some types of viruses.
7. Write Names of four Anti-virus programs.
8. State the purpose of password.
9. Who is a hacker?
10. What do you know about copyright act?
11. State the purpose of copyright act.
12. What is biomatrics.
13. Give two Biometric methods to prove your identity to log on a system.
14. Define chermobal Virus.
15. Give three suggestions to protect your computer form virus.
16. How is security maintained on computer?
17. Write any two security violations?
18. Why data protection is important?
19. What is privacy issue?
20. Define Software Privacy.
21. What is computer Misuse Act 1990?
22. Explain virus activation in computer.
23. What is Redlof?
24. Write basic function of Antivirus Software.
25. Why it is necessary to back up data regularly?
26. Define the term Backup.
27. Explain data Security.
28. What is meant by security?
LONG QUESTION
1. What is virus and explain its types?
2. What is intentional and unintentional threats? Give all its possible solution?
3. What is data backup? Explain its types?

15 | P a g e
Computer Part – 1

Unit 7
1 Expansion slots connect interface cards to:
(A) Ports (B) Peripheral device (C) Mother Board (D) System bus
2 Windows explorer is used to:
(A) Access the internet (B) Explore system resources
(C) Perform maintenance task (D) Navigate life and folder on computer
3 Under MS-DOS, a user communicates with the operating system by issuing:
(A) Commands (B) Instruction (C) Routines (D) Procedure
4 Windows is the most popular product of:
(A) Microsoft (B) Sun system (C) ANSI (D) Hewlett
5 Computer cannot boot if it does not have:
(A) Computer (B) Linker (C) Interpreter (D) Operating system
6 Which is a mouse event?
(A) Left click (B) Key up (C) Key down (D)Buttons
7 The Process of touching an object with moue pointer is called:
(A) Pause (B) Dropping (C) Dragging (D) Pointing
8 Pressing and releasing the left mouse button quickly is called:
(A) Clicking (B) Dropping (C) Pointing (D) Dragging
9 An operating system is a:
(A) System Utility (B) Application Software (C) System software (D) Software Package
10 Software can be removed / installed through:
(A) Control Panel (B) Recycle Bin (C) My Documents (D) My Computers
11 Small images representing program file etc is called:
(A) Menu (B) GUI (C) Command (D) Icon
12 We press Enter key in MS-Word to create a:
(A) Line (B) Sentence (C) Paragraph (D) Document
13 The folder which contains administrative systems is:
(A) Installer (B) Control Panel (C) Debugger (D) Linker
14 Which of the following contains the administrative tools in operating system:
(A) Control Panel (B) Internet Explorer (C) Recycle Bin (D) My Document
15 The operating system based on NT technology is:
(A) Windows 95 (B) Windows 97 (C) Windows 98 (D) Windows 2000
16 Memory management is function of:
(A) Application software (B) Utility program
(C) Device Driver (D) Operating System
17 The Maximum partitions that can be created on a basic disk is:
(A) 2 (B) 4 (C) 6 (D) 8
18 How many types of partition are?
(A) 2 (B) 4 (C) 6 (D) 8
19 List of documents waiting to be printed on printer is called:
(A) Print Lost (B) Print Stock (C) Print queue (D) Print line
20 Windows operating system is an example of:
(A) System software (B) Application software (C) Customized software (D) All of these
21. Computer cannot boot if it does not have:
a) Internet b) Linker c) Interface d) Operating system
22. An operating system is a:
a) System unit b) System Software c) Application Software d) Software Package
23. Interface used DOS is called:
a) Command line interface b) Menu driven interface c) Graphical User Interface
d) Design Interface
24. As compared to command line operating system , a GUI operating system is
a) More difficult b) Easier to use c) More reliable d) More complicated

16 | P a g e
Computer Part – 1
25. Windows operating system was developed by:
a) Sun system b) Microsoft c) Hewlett d) JAVA
26. The operating system based on NT technology is:
a) Windows 95 b) Windows 97 c) Windows 98 d) Windows 2000
KEY
1 C 2 A 3 A 4 A 5 D 6 A 7 D 8 D 9 C 10 A
11 D 12 A 13 B 14 A 15 D 16 B 17 A 18 A 19 C 20 A
21 d 22 b 23 a 24 b 25 b 26 d
UNIT – 7: SHORT QUESTIONS:
1. Define Graphical User Interface with example.
2. Why does a computer needs an operating system?
3. List any two functions of operating define user interface system.
4. Define event.
5. What is meant by multitasking operating system?
6. Distinguish between single-user and multi user Operating system.
7. Different between Multitasking and multi-processing.
8. State the use of partition.
9. How can you print a document?
10. Define print Queue.
11. Define Command line operating system.
12. Give some example of GUI operating system.
13. What is the Purpose of recycle Bin?
14. List out four objects/components of windows operating system.
15. What OS multi user operating system?
16. What is multi-Processing?
17. Define Desktop.
18. Define desktop publishing.
19. Define Extended Partition.
20. What is file management?
21. Give one difference between Graphical user interface and Command line interface.
22. Writ two uses of start button in windows 2000.
23. What is my document folder?
24. Define window explorer.
25. Define internet explorer.
26. List at least two events of Mouse.
27. Write two events of key board.
28. What do you mean by plug and play?
29. What is Primary Partition?

17 | P a g e
Computer Part – 1

Unit 8
1. Which of the following is a word processor:
(A) Adobe (B) photo shop (C) Excel (D) Word
2. Which of the following can be used to launch the word art:
(A) Status Bar (B) Drawing tool bar (C) Standard tool bar (D) Ruler
3. A word processor can:
(A) copy text (B) Insert text (C) Find and Replace (D) All
4. The extension of MS Word file is:
(A) Word (B) xlx (C) jpg (D) doc
5. Clip Board stores:
(A) Inter text (B) copy text (C) delete text (D) none
6. The name of the document is displayed:
(A) Menu bar (B) Title bar (C) status bar (D) scroll bar
7. How many orientation types are available in word:
(A) 2 (B) 4 (C) 5 (D) 1
8. The default orientation for printing is:
(A) portrait (B) vertical (C) landscape (D) horizontal
9. Header and footer option can be used from which menu:
(A) tools (B) insert (C) edit (D) view
10. The maximum zoom of MS Word is:
(A) 100 (B) 200 (C) 300 (D) 400
KEY
1 D 2 B 3 D 4 D 5 B 6 B 7 2 8 A 9 D 10 D
UNIT – 8: SHORT QUESTIONS:
1. Define word Processor.
2. List any two uses of word processor uses of word processor.
3. Describe "undo" and "Redo" commands.
4. Define Header and Footer.
5. Differentiate between font size and font style in MS Word.
6. What do you know about indentation?
7. Write shortcut key to print a document.
8. Distinguish between save and save as options.
9. What is status bar?
10. What is WYSIWYG
11. List two features of text editor.
12. Define insertion point.
13. List any two differences in cut and copy option.
14. What is paragraph formatting?
15. Define macros.
16. What is character formatting?
17. Write one difference between line spacing and paragraph spacing. Differentiate between margins
and indent of paragraph.
18. Define Title bar.
19. Define Margins.
20. List any four features of simple word processors.
21. Write shortcut keys to save and print a document.
22. Define font in MS. Word.
23. State use of clipboard in MS-Word.
24. Describe two typing modes in MS-Word.
25. Differentiate between alignment and indentation in MS word.
26. State use of page setup dialog box.
27. What is word art option in MS-Word?

18 | P a g e
Computer Part – 1

Unit 9
1 Which of the following function is used to get current date is MS-Excel?
(A) Month (B) Year (C) Today (D) Exact
2 The default number format assigned to a cell is:
(A) Currency (B) Number (C) Text (D) General
3 The function in MS-Excel is used to get the smallest value is called:
(A) MAX (B) MIN (C) MININUM (D) SMALLEST
4 Which of the following is an absolute address?
(A) AI (B) $AI (C) A$I (D) $A$I
5 A word book is a group of:
(A) Table (B) Formulas (C) Sheets (D) Functions
6 The cell range from A3 to G3 should be written as:
(A) A3-G3 (B) A3:G3 (C) A3+G3 (D) A3.G3
7 The number of argument in SQRT ( ) function in MS-Excel is / are:
(A) one (B) two (C) equal or range (D) equal to column number
8 A work book is a collection of:
(A) Tables (B) Formula (C) Sheets (D) Functions
9 The actual working area in Microsoft Excel is:
(A) Workbook (B) Worksheet (C) Database (D) Lotus-123
10 In Spread-Sheet, by default rows are labeled by:
(A) Letters (B) Special Symbols (C) Numbers (D) Underscore sign
11 Which of the following is a correct column address?
(A) AA (B) 25 (C) 3B (D) C5
12 How many worksheets are contained in a workbook by default?
(A) 3 (B) 4 (C) 5 (D) 6
13 The vertical dimension of spread sheet is called:
(A) Field (B) Record (C) Row (D) None
14 When we copy a cell containing formula, it will change its references:
(A) Managed range (B) Labeling (C) Relative cell reference (D) Absolute cell reference
15 Which of the following is a correct cell address?
(A) AA (B) 25 (C) 3B (D) C5
16 In MS-Excel, formula beings with:
(A) > (B) < (C) = (D) ==
17 The function in MS-Excel is used to get the largest value is called:
(A) MAX (B) MIN (C) Minimum (D) Smallest
KEY
1 C 2 A 3 B 4 A 5 C 6 B 7 B 8 C 9 B 10 A
11 D 12 A 13 A 14 C 15 D 16 C 17 A
UNIT – 9: SHORT QUESTIONS:
1. Write Basic of spread sheet.
2. Define Worksheet.
3. Define workbook.
4. Relative Cell Reference.
5. What is meant by cell reference?
6. What are functions in MS-Excel?
7. Write down a formula to add five cell in a row MS-Excel.
8. List any four function of MS-Excel?
9. Write formula for calculating average of three numbers.
10. Write function that does total of cell from A1 to A5.
11. List two benefits of spread sheet.

19 | P a g e
Computer Part – 1
12. What is 3-D sheet?
13. Difference between worksheet and workbook.
14. What is active cell in MS-Excel
15. Can you enter data in passive cell?
16. What do you understand by the term named ranges?
17. Define Sum and average function.
18. Differentiate between formula and function.
19. What is Formula?
20. What is meant by page orientation?
21. What is Cell?
22. What is difference between Active and Passive Cell?
23. How formula is used in MS-Excel? Give an Example.
24. Write the formula for calculating the average of cell B2 and B3.
25. Write functions that totals cell B3 through B10.

20 | P a g e
Computer Part – 1

Unit 10
1 Who owns the internet?
(A) Us government (B) Pak telecom (C) United nations (D) No One
2 __________ is used to find information on the world wide web:
(A) Web browser (B) Web site (C) Search Engine (D) Web server
3 Which of the following services is provided by internet?
(A) WWW (B) FTP (C) E-mail (D) All
4 Who is responsible for security of online data?
(A) User (B) LAN administrator
(C) Inter service (D) Organization obtaining the data
5 PTCL is a:
(A) Internet (B) ISP (C) Web browser (D) Search engine
6 Which of the following is top level domain?
(A) HTTP (B) .com (C) HTML (D) URL
7 How many types of addressing schemes are?
(A) 2 (B) 3 (C) 4 (D) 5
8 Internet differs one computer from another by:
(A) Architecture (B) Manufacture (C) IP address (D) Brand Name
9 The length of IPV4 address is:
(A) 4-bits (B) 16 bits (C) 32 bits (D) 64 bits
10 ________ contains permanents IP address:
(A) Client (B) Server (C) User (D) NIC
11 The length of IPV6 address is:
(A) 32 bit (B) 64 bit (C) 128 bit (D) 256 bit
12 .com, .edu and .gov are examples of:
(A) top level domain (B) tag (C) protocol (D) e-mail
13 Which of the following is used to find information on world wide web?
(A) Web browser (B) Website (C) Search engine (D) Web server
14 Software that is used to view and search pages on internet is:
(A) Web server (B) Web browser (C) Website (D) Web pages
15 A collection of related web-pages is called:
(A) WWW (B) Web portal (C) Website (D) Web server
16 A web page is written in:
(A) HTML (B) SQL (C) FTP (D) TCP/IP
17 The computers on internet that contain websites are called:
(A) Central Computers (B) Site Computers (C) Clients (D) Web Servers
18 Symbol that separates parts in an e-mail address is:
(A) $ (B) # (C) @ (D) ^
KEY
1 D 2 C 3 D 4 C 5 B 6 B 7 A 8 C 9 C 10 B
11 C 12 A 13 C 14 B 15 C 16 A 17 D 18 C
UNIT – 10: SHORT QUESTIONS:
1. Define internet. 11. Write two limitations of an email.
2. List any two negative impacts of internet on society. 12. Define IP Addressing?
3. Write two facilities provided by internet. 13. What is web publishing?
4. Name some ISP's in Pakistan. 14. Define WWW.
5. What is a Website? 15. Describe the term web browsing.
6. How web pages are created? 16. What is use of Web Server?
7. List name of five search engines. 17. Explain URL.
8. Briefly describe web surfing. 18. What is purpose of search Engine?
9. What is Email? 19. Difference between URL and website.
10. What are advantages of Email? 20. List name of some popular web Browser

21 | P a g e