RM & IPR – 21RMI56 RM & IPR – 21RMI56

3. Diagnostic research studies: To determine the frequency with which something occurs or
MODULE 1: INTRODUCTION with which it is associated with something else
Syllabus 4. Hypothesis-testing research studies: To test a hypothesis of a causal relationship between
variables
Meaning of Research, Objectives of Engineering Research, and Motivation in Engineering
Research, Types of Engineering Research, Finding and Solving a Worthwhile Problem. Ethics in The objective of engineering research is
Engineering Research, Ethics in Engineering Research Practice, Types of Research Misconduct,
Ethical Issues Related to Authorship.  To solve new and important problems, and since the conclusion at the end of one‘s
research outcome has to be new, but when one starts, the conclusion is unknown.
 Research objectives can sometimes be convoluted and difficult to follow. Knowing where
and how to find different types of information helps one solve engineering problems, in
MEANING OF RESEARCH both academic and professional career.
 Lack of investigation into engineering guidelines, standards, and best practices result in
 Research refers to a careful, well-defined (or redefined), objective, and systematic
failures with severe repercussions. As an engineer, the ability to conduct thorough and
method of search for knowledge, or formulation of a theory that is driven by
accurate research while clearly communicating the results is extremely important in
inquisitiveness for that which is unknown and useful on a particular aspect so as to make
decision making.
an original contribution to expand the existing knowledge base.
 The main aim of the research is to apply scientific approaches to seek answers to open
 Research involves formulation of hypothesis or proposition of solutions, data analysis,
questions, and although each research study is particularly suited for a certain approach
and deductions; and ascertaining whether the conclusions fit the hypothesis.
 The objectives of engineering research should be to develop new theoretical or applied
 Research is a process of creating, or formulating knowledge that does not yet exist. Thus
knowledge and not necessarily limited to obtaining abilities to obtain the desired result.
research is an art of scientific investigation
 The objectives should be framed such that in the event of not being able to achieve the
OBJECTIVES OF ENGINEERING RESEARCH desired result that is being sought, one can fall back to understanding why it is not
possible, because that is also a contribution toward ongoing research in solving that
The purpose of research is to discover answers to questions through the application of scientific
problem.
procedures. The main aim of research is to find out the truth which is hidden and which has not
been discovered as yet. Though each research study has its own specific purpose, we may think MOTIVATION IN ENGINEERING RESEARCH
of research objectives as falling into a number of following broad groupings:
The possible motives may be the result of one or more of the following desires:
1. Exploratory or Formulative research studies: To gain familiarity with a phenomenon or to
 Studies have shown that intrinsic motivations like interest, challenge, learning, meaning,
achieve new insights into it
purpose, are linked to strong creative performance;
2. Descriptive research studies: To portray accurately the characteristics of a particular
 Extrinsic motivating factors like rewards for good work include money, fame, awards,
individual, situation or a group
praise, and status are very strong motivators, but may block creativity. For example:

Page 1 Page 2
 RM & IPR – 21RMI56 RM & IPR – 21RMI56

Research outcome may enable obtaining a patent which is a good way to become rich and  Applied research seeks to solve an immediate problem facing the organization, whereas
famous. fundamental research is concerned with generalizations and formulation of a theory.
 Influences from others like competition, collaboration, commitment, and encouragement  Research concerning natural phenomena or relating to pure mathematics are examples of
are also motivating factors in research. For example: my friends are all doing research fundamental research.
and so should I, or, a person that I dislike is doing well and I want to do better.  Research to identify social or economic trends, or those that find out whether certain
 Personal motivation in solving unsolved problems, intellectual joy, service to community, communications will be read and understood are examples of applied research.
and respectability are all driving factors.  The primary objective of applied research is to determine a solution for compelling
problems in actual practice, while basic research is aimed at seeking information which
The following factors would be a mix of extrinsic and intrinsic aspects:
could have a broad base of applications in the medium to long term.

 Wanting to do better than what has been achieved in the world

Quantitative versus Qualitative:
 Improve the state of the art in technology
 Contribute to the improvement of society  Quantitative research uses statistical observations of a sufficiently large number of
 Fulfillment of the historical legacy in the immediate socio-cultural context. representative cases to draw any conclusions
 While qualitative researchers rely on a few non representative cases or verbal narrative in
Several other factors like government directives, funding opportunities in certain areas, and behavioral studies such as clustering effect in intersections in Transportation engineering
terms of employment, can motivate people to get involved in engineering research. to make a proposition.

TYPES OF ENGINEERING RESEARCH Conceptual vs. Empirical

Descriptive versus Analytical:  Conceptual research is that related to some abstract idea(s) or theory.
 It is generally used by philosophers and thinkers to develop new concepts or to reinterpret
 Descriptive research includes comparative and co relational methods, and fact-finding
existing ones.
inquiries, to effectively describe the present state of art. The researcher holds no control
over the variables; rather only reports as it is.  On the other hand, empirical research relies on experience or observation alone, often
without due regard for system and theory.
 Descriptive research also includes attempts to determine causes even though the variables
cannot be controlled.  It is data-based research, coming up with conclusions which are capable of being verified
by observation or experiment. We can also call it as experimental type of research.
 On the contrary, in analytical research, already available facts for analysis and critical
evaluation are utilized. Some research studies can be both descriptive and analytical  In such a research it is necessary to get at facts firsthand, at their source, and actively to
go about doing certain things to stimulate the production of desired information.
Applied versus Fundamental:  In such a research, the researcher must first provide himself with a working hypothesis or
guess as to the probable results. He then works to get enough facts (data) to prove or
 Research can either be applied research or fundamental (basic or pure) research.
disprove his hypothesis.

Page 3 Page 4
 RM & IPR – 21RMI56 RM & IPR – 21RMI56

 He then sets up experimental designs which he thinks will manipulate the persons or the variables. At the very outset the researcher must single out the problem he wants to study,
materials concerned so as to bring forth the desired information. i.e., he must decide the general area of interest or aspect of a subject-matter that he would
 Such research is thus characterized by the experimenter‘s control over the variables under like to inquire into.
study and his deliberate manipulation of one of them to study its effects. 2. Extensive literature survey: Once the problem is formulated, a brief summary of it
 Empirical research is appropriate when proof is sought that certain variables affect other should be written down. It is compulsory for a research worker writing a thesis for a
variables in some way. Evidence gathered through experiments or empirical studies is Ph.D. degree to write a synopsis of the topic and submit it to the necessary Committee or
today considered to be the most powerful support possible for a given hypothesis. the Research Board for approval. At this juncture the researcher should undertake
extensive literature survey connected with the problem.
ENGINEERING RESEARCH PROCESS
3. Development of working hypotheses: After extensive literature survey, researcher
Research process consists of series of actions or steps necessary to effectively carry out research should state in clear terms the working hypothesis or hypotheses. Working hypothesis is
and the desired sequencing of these steps. tentative assumption made in order to draw out and test its logical or empirical
consequences.
Hypothesis should be very specific and limited to the piece of research in hand because it
has to be tested. The role of the hypothesis is to guide the researcher by delimiting the
area of research and to keep him on the right track. It sharpens his thinking and focuses
attention on the more important facets of the problem.
4. Preparing the research design: The research problem having been formulated in clear
cut terms, the researcher will be required to prepare a research design, i.e., he will have to
state the conceptual structure within which research would be conducted. The preparation
of such a design facilitates research to be as efficient as possible yielding maximal
information. In other words, the function of research design is to provide for the
collection of relevant evidence with minimal expenditure of effort, time and money.
5. Determining sample design: The researcher must decide the way of selecting a sample
or what is popularly known as the sample design. In other words, a sample design is a
definite plan determined before any data are actually collected for obtaining a sample
The chart indicates that the research process consists of a number of closely related activities, as from a given population. Sampling can be done choosing a particular unit, random unit
shown through I to VII. But such activities overlap continuously rather than following a strictly selection, systematic pattern, homogenous group (stratified sampling), quota, cluster or
prescribed sequence area, multi stages and sequential.
6. Collecting the data: In dealing with any real life problem it is often found that data at
1. Formulating the research problem: There are two types of research problems, viz.,
hand are inadequate, and hence, it becomes necessary to collect data that are appropriate.
those which relate to states of nature and those which relate to relationships between
There are several ways of collecting the appropriate data which differ considerably in

Page 5 Page 6
 RM & IPR – 21RMI56 RM & IPR – 21RMI56

context of money costs, time and other resources at the disposal of the researcher. 11. Preparation of the report or the thesis: Finally, the researcher has to prepare the report
Primary data can be collected either through experiment or through survey. If the of what has been done by him. Writing of report must be done with great care keeping in
researcher conducts an experiment, he observes some quantitative measurements, or the view the following:
data, with the help of which he examines the truth contained in his hypothesis. But in the  The layout of the report should be as follows: (i) the preliminary pages; (ii) the main text,
case of a survey, data can be collected by any one or more of the following ways by and (iii) the end matter.
observation, through personal interview, through telephonic interview, by mailing the  In its preliminary pages the report should carry title and date followed by
questionnaire etc acknowledgements and foreword. Then there should be a table of contents followed by a
7. Execution of the project: It is a very important step in the research process. If the list of tables and list of graphs and charts, if any, given in the report.
execution of the project proceeds on correct lines, the data to be collected would be  The main text of the report should have the following parts:
adequate and dependable. The researcher should see that the project is executed in a (a) Introduction: It should contain a clear statement of the objective of the research and
systematic manner and in time. A careful watch should be kept for unanticipated factors an explanation of the methodology adopted in accomplishing the research. The scope of
in order to keep the survey as much realistic as possible. the study along with various limitations should as well be stated in this part.
8. Analysis of data: After the data have been collected, the researcher turns to the task of (b) Summary of findings: After introduction there would appear a statement of findings
analyzing them. The analysis of data requires a number of closely related operations such and recommendations in non-technical language. If the findings are extensive, they
as establishment of categories, the application of these categories to raw data through should be summarized.
coding, tabulation and then drawing statistical inferences. The unwieldy data should (c) Main report: The main body of the report should be presented in logical sequence and
necessarily be condensed into a few manageable groups and tables for further analysis. broken-down into readily identifiable sections.
Thus, researcher should classify the raw data into some purposeful and usable categories. (d) Conclusion: Towards the end of the main text, researcher should again put down the
9. Hypothesis-testing: After analyzing the data as stated above, the researcher is in a results of his research clearly and precisely. In fact, it is the final summing up.
position to test the hypotheses, if any, he had formulated earlier. Do the facts support the  At the end of the report, appendices should be enlisted in respect of all technical data.
hypotheses or they happen to be contrary? This is the usual question which should be Bibliography, i.e., list of books, journals, reports, etc., consulted, should also be given in
answered while testing hypotheses. Various tests, such as Chi square test, t-test, F-test, the end. Index should also be given specially in a published research report.
have been developed by statisticians for the purpose. The hypotheses may be tested
FINDING AND SOLVING A WORTHWHILE PROBLEM
through the use of one or more of such tests, depending upon the nature and object of
research inquiry. Hypothesis-testing will result in either accepting the hypothesis or in  A researcher may start out with the research problems stated by the Supervisor or posed
rejecting it. by others that are yet to be solved. Alternately, it may involve rethinking of a basic
10. Generalizations and interpretation: If a hypothesis is tested and upheld several times, it theory, or need to be formulated or put together from the information provided in a group
may be possible for the researcher to arrive at generalization, i.e., to build a theory. As a of papers suggested by the Supervisor.
matter of fact, the real value of research lies in its ability to arrive at certain  Research scholars are faced with the task of finding an appropriate problem on which to
generalizations begin their research. Skills needed to accomplish such a task at the outset, while taking
care of possible implications are critically important but often not taught

Page 7 Page 8
 RM & IPR – 21RMI56 RM & IPR – 21RMI56

 Once the problem is vaguely identified, the process of literature survey and technical the dissertation. George Pólya (1887–1985) suggested a 4-step procedure for
reading would take place for more certainty of the worthiness of the intended problem. mathematical problem-solving, which is relevant to engineering researchers as well.
 However, an initial spark is ideally required before the process of literature survey may
The recommended steps to solve a research problem are
duly begin.
 Sometimes, an oral presentation by somebody which is followed by asking questions or  Understand the problem, restate it as if it‘s your own, visualize the problem by drawing
introspection provides this perspective which reading papers do not. figures, and determine if something more is needed.
 At other times, a development in another subject may have produced a tool or a result  One must start somewhere and systematically explore possible strategies to solve the
which has direct implications to the researcher‘s subject and may lead to problem problem or a simpler version of it while looking for patterns.
identification.  Execute the plan to see if it works, and if it does not then start over with another
 A worthwhile research problem would have one or more attributes. approach. Having delved into the problem and returned to it multiple times, one might
 It could be non-intuitive/counterintuitive even to someone who knows the area, have a flash of insight or a new idea to solve the problem.
something that the research community had been expecting for some time, a major  Looking back and reflecting helps in understanding and assimilating the strategy, and is a
simplification of a central part of the theory, a new result which would start off a new sort of investment into the future.
subject or an area, provides a new method or improves upon known methods of doing
something which has practical applications, or a result which stops further work in an ETHICS IN ENGINEERING RESEARCH

area.
 Ethics generally refers to a set of rules distinguishing acceptable and unacceptable
 The researcher has to be convinced that the problem is worthwhile before beginning to conduct, distinguishing right from wrong as such
tackle it because best efforts come when the work is worth doing, and the problem and/or
 Most people learn such norms in their formative years, but moral development continues
solution has a better chance of being accepted by the research community.
through different stages of growth. Although everyone recognizes some common ethical
 Not all problems that one solves will be great, and sometimes major advancements are norms, but there is difference in interpretation and application.
made through solutions to small problems dealt with effectively. Some problems are
 Ethical principles can be used for evaluation, proposition or interpretation of laws.
universally considered hard and open, and have deep implications and connections to Although ethics are not laws, but laws often follow ethics because ethics are our shared
different concepts.
values.
 The reality is that most researchers in their lifetime do not get into such problems.  International norms for the ethical conduct of research have been there since the adoption
However, hard problems get solved only because people tackle them.
of the Nuremberg Code in 1947.
 The question a researcher has to grapple with whether the time investment is worth it  According to Whitbeck, the issues related to research credit dates back to the
given that the likely outcome is negative, and so it is a difficult personal decision to
establishment of the British Royal Society (BRS) in the seventeenth century to refine the
make.
methods and practices of modern science. This event altered the timing and credit issues
 At the same time, even in the case of failure to solve the intended hard problem, there on the release of research results since BRS gave priority to whoever first submitted
may be partial/side results that serve the immediate need of producing some results for
findings for publication, rather than trying to find out who had first discovered.

Page 9 Page 10
 RM & IPR – 21RMI56 RM & IPR – 21RMI56

 Whitbeck raised two simple but significant questions to address the tricky issue of o Influence may also be applied by researchers through design (a process that
authorship in research: translates the requirements into a blueprint to fulfill those requirements). During
o Who should be included as an author and the design process, decision is to be made about the priority in importance of the
o The appropriate order of listing of authors. requirements taking ethical aspects into consideration.
 In an increasingly interconnected world, the issue of co-authorship is very relevant to all o Thirdly, engineering researchers have to choose between different alternatives
researchers. There are issues around individuals who may be deeply involved during the fulfilling similar functions.
conduct of the research work, but may not contribute in the drafting phase  Research outcomes often have unintended and undesirable side effects. It is a vital ethical
 Government bodies and universities worldwide have adopted certain codes for research responsibility of researchers to ensure that hazards/risks associated with the technologies
ethics. Research ethics and the responsible conduct of research are often erroneously used that they develop, are minimized and alternative safer mechanisms are considered.
interchangeably.  If possible, the designs should be made inherently safe such that they avoid dangers, or
 Research ethics examines the appropriate application of research outcomes, while come with safety factors, and multiple independent safety barriers, or if possible a
responsible conduct of research deals with the way the work is undertaken. supervisory mechanism to take control if the primary process fails.

ETHICS IN ENGINEERING RESEARCH PRACTICE TYPES OF RESEARCH MISCONDUCT

 Technological developments raise a whole range of ethical concerns such as privacy Engineering research should be conducted to improve the state-of-the-art of technologies.
issues and data related to surveillance systems, and so engineering researchers need to Research integrity encompasses dealing fairly with others, honesty about the methods and
make ethical decisions and are answerable for the repercussions borne out of their results, replicating the results wherever possible so as to avoid errors, protecting the welfare of
research as outcomes. research subjects, ensuring laboratory safety, and so forth. In order to prevent mistakes, peer
 The reason that ethics matter in data used in engineering research is usually because there reviews should take place before the research output is published.
is impact on humans. Certain practices may be acceptable to certain people in certain
There may be different types of research misconduct as described, which can be summarized as
situations, and the reasons for unacceptability may be perfectly valid.
follows:
 We have unprecedented access to data today, and unprecedented options for analysis of
these data and consequences in engineering research related to such data. Are there things  Fabrication (Illegitimate creation of data): Fabrication is the act of conjuring data or
that are possible to do with this data, that we agree we should not do? experiments with a belief of knowledge about what the conclusion of the analysis or
 Engineering ethics gives us the rule book; tells us, how to decide what is okay to do and experiments would be, but cannot wait for the results possibly due to timeline pressures
what is not. Engineering research is not work in isolation to the technological from supervisor or customers.
development taking place.  Falsification (Inappropriate alteration of data): Falsification is the misrepresentation
 Researchers make many choices that matter from an ethical perspective and influence the or misinterpretation, or illegitimate alteration of data or experiments, even if partly, to
effects of technology in many different ways: support a desired hypothesis even when the actual data received from experiments
o By setting the ethically right requirements at the very outset, engineering suggest otherwise.
researchers can ultimately influence the effects of the developed technology.

Page 11 Page 12
 RM & IPR – 21RMI56 RM & IPR – 21RMI56

Falsification and fabrication of data and results, hamper engineering research and cause One is not expected to churn out research outcomes in thin air.
false empirical data to percolate in the literature, wreck trustworthiness of individuals However, whatever is relevant can be reported by paraphrasing in one‘s own words, that
involved, incur additional costs, impede research progress, and cause actual and is, without verbatim copy.
avoidable delays in technical advancement. One can also summarize the relevant content and naturally, the summary invariably
Misleading data can also crop up due to poor design of experiments or incorrect would use one‘s own words. In all these cases, citing the original source is important.
measurement practices. However, merely because one has cited a source, it does not mean that one can copy
 Plagiarism (Taking other’s work sans attribution): Plagiarism takes place when sentences (or paragraphs) of the original content verbatim.
someone uses or reuses the work (including portions) of others (text, data, tables, figures, A researcher should practice writing in such a way that the reader can recognize the
illustrations or concepts) as if it were his/her own without explicit acknowledgement. difference between the ideas or results of the authors and those that are from other
Verbatim copying or reusing one‘s own published work is termed as self-plagiarism and sources. Such a practice enables one to judge whether one is disproportionately using or
is also an unacceptable practice in scientific literature. relying on content from existing literature.
The increasing availability of scientific content on the internet seems to encourage  Other Aspects of Research Misconduct: Serious deviations from accepted conduct
plagiarism in certain cases, but also enables detection of such practices through could be construed as research misconduct. When there is both deception and damage, a
automated software packages. How are supervisors, reviewers or editors alerted to fraud is deemed to have taken place. Sooner or later ethical violations get exposed.
plagiarism? Simultaneous submission of the same article to two different journals also violates
(i) Original author comes to know and informs everyone concerned. publication policies.
(ii) Sometimes a reviewer finds out about it during the review process. Another issue is that when mistakes are found in an article or any published content, they
(iii) Or, readers who come across the article or book, while doing research. are generally not reported for public access unless a researcher is driven enough to build
on that mistake and provide a correct version of the same which is not always the primary
Although there are many free tools and also paid tools available that one can procure
objective of the researcher.
institutional license of, one cannot conclusively identify plagiarism, but can only get a
similarity score which is a metric that provides a score of the amount of similarity ETHICAL ISSUES RELATED TO AUTHORSHIP
between already published content and the unpublished content under scrutiny.
However, a low similarity score does not guarantee that the document is plagiarism free.  Academic authorship involves communicating scholarly work, establishing priority for
their discoveries, and building peer-reputation, and comes with intrinsic burden of
It takes a human eye to ascertain whether the content has been plagiarized or not.
acceptance of the responsibility for the contents of the work. It is the primary basis of
It is important to see the individual scores of the sources, not just the overall similarity
evaluation for employment, promotion, and other honors.
index. Setting a standard of a maximum allowable similarity index is inadequate usage of
the tool. Patchwork plagiarism is more difficult to evaluate.  There is several important research conduct and ethics related issues connected to
authorship of research papers and are summarized herewith in the context of engineering
There are simple and ethical ways to avoid a high similarity count on an about to be
research.
submitted manuscript. Sometimes, certain published content is perfect for one‘s research
 Credit for research contributions is attributed in three major ways in research
paper, perhaps in making a connection or fortifying the argument presented. The
publications: by authorship (of the intended publication), citation (of previously
published material is available for the purpose of being used fairly.

Page 13 Page 14
 RM & IPR – 21RMI56 RM & IPR – 21RMI56

published or formally presented work), and through a written acknowledgment (of some  It is imperative that their consent is sought with respect to the content and that they be
inputs to the present research). agreeable to the submission.
 Authorship establishes both accountability and gives due credit. A person is expected to  In case of misconduct like inappropriate authorship, while the perpetrator is easier to
be listed as an author only when associated as a significant contributor in research design, find, the degree of appropriate accountability of the coauthors is not always obvious.
data interpretation, or writing of the paper. Including ―guest‖ or ―gift‖ (co-authorship Being able to quantify the contributions so as to appropriately recognize and ascertain the
bestowed on someone with little or no contribution to the work) authors dilutes the degree of associated accountability of each coauthor, is appealing.
contribution of those who actually did the work, inappropriately inflates credentials of the  Double submission is an important ethical issue related to authorship, which involves
listed authors, and is ethically a red flag highlighting research misconduct. submission of a paper to two forums simultaneously. The motivation is to increase
 Sometimes, the primary author dubiously bestows co-authorship on a junior faculty or a publication possibility and possibly decrease time to publication. Reputed journals want
student to boost their chances of employment or promotion, which can be termed as to publish original papers, i.e., papers which have not appeared elsewhere, and strongly
Career-boost authorship. discourage double submission.
 There is also an unfortunate malpractice of co-authorship that can be described as
―Career-preservation authorship‖ wherein a head of the department, a dean, a provost, or
other administrators are added as Coauthors because of quid pro quo arrangement
wherein the principal author benefits from a ―good relation‖ with the superiors and the
administrator benefits from authorship without doing the required work for it.
Sometimes, an actual contributor abstains from the list of authors due to no disclosed
conflict of interest within the organization. Such co-authorships can be termed as ghost
co-authorship. Full disclosure of all those involved in the research is important so that
evaluation can happen both on the basis of findings, and also whether there was influence
from the conflicts.
 In another type of questionable authorship, some researchers list one another as coauthors
as a reciprocal gesture with no real collaboration except minimal reading and editing,
without truly reviewing the work threadbare.
 Some authors, in trying to acquire a sole-authored work, despite relying on significant
contribution to the research work from others, recognize that effort only by an
acknowledgment, thereby misrepresenting the contributions of the listed authors.
 The unrecognized ―author‖ is as a consequence, unavailable to readers for elaboration.
 All listed authors have the full obligation of all contents of a research article, and so
naturally, they should also be made aware of a journal submission by the corresponding
author.

Page 15 Page 16