Gigabit Ethernet Media Converter

User Manual

(Version 1.2)

Beijing Fibridge Co., Ltd.

 Gigabit Media Converter User Manual

Contents
1. Overview ....................................................................... 3
2. Features ........................................................................ 3
3. Application.................................................................... 5
4. Specification ................................................................. 5
4.1. Ethernet Port ......................................................... 5
4.2. Fiber Optical Port .................................................. 6
4.3. Power .................................................................... 6
4.4. Environment .......................................................... 6
4.5. Dimensions............................................................ 7
5. Panel Instruction .......................................................... 8
5.1. Panel of Module .................................................... 8
5.2. Front Panel of Standalone Device ......................... 9
5.3. Front Panel of Chassis .......................................... 9
5.4. Back Panel of Chassis ........................................ 10
5.5. LEDs’ Description ................................................ 10
6. Installation & Operation ............................................. 11
6.1. Installation Steps ................................................. 11
6.1.1. Preparation .................................................... 11
6.1.2. Connection..................................................... 11
6.1.3. Power ON ...................................................... 11
6.2. Something Notice ................................................ 12
- 1 -
 Gigabit Media Converter User Manual

6.3. Faults & Solutions ............................................... 12

6.3.1. Power LED is off ............................................ 12
6.3.2. Tlink LED is off after power up ....................... 13
6.3.3. Flink LED is off after power up ....................... 13
6.3.4. Data transfer abnormally, including transferring
failure, data loss ........................................................... 13
7. Order Information....................................................... 14
7.1. part number of module or standalone media
converter ...................................................................... 14
7.2. Part Number of Chassis ...................................... 15
7.3. Part Number of Chassis power supply module.... 15

- 2 -
 Gigabit Media Converter User Manual

1. Overview
FB-10/100MMC Series Media Converter can be used
in the telecommunication IP MAN broadband optical network
solution for its steady performance and powerful function. It
convert 1000bps Ethernet copper port to optical port, up to
80Km distance on single-mode fiber without any relay device.
It support auto-compatible 10\100\1000Mbps, half/full duplex
topology, and MDI/MDI-X auto recognize. Selectable SC, FC,
ST optical port makes the networks more flexible and feasible
for the possibility of cost reduction.
FB-10/100MMC Serial Media Converter includes two
types: managed and unmanaged converter. The
unmanageable standalone device has power supply built in.
Besides providing all of the functions of the unmanaged
device, managed device can support WEB management,
SNMP software management and console management.
Customers conveniently view and set all the local modules
and standalone via management interface.

2. Features
z Support 10Base-T,100Base-Tx,1000Base-T

- 3 -
 Gigabit Media Converter User Manual

z Fully compatible with IEEE802.3, IEEE802.3u,

IEEE802.3x standards
z Fiber type support multimode and single-mode optional
z Up to 80Km distance on single-mode fiber without any
relay device
z High-performance auto-negotiation chips make sure the
data transfer with higher security, stability and without
block
z Support half/full duplex mode auto-negotiate
z All the modules support hot-swap function
z Single-strand/double-strand/CWDM optical port
selectable
z Two type optional: standalone unit and Modular Chassis
Built-in double redundant power modules of 16- slot
chassis make higher security and stability possible

- 4 -
 Gigabit Media Converter User Manual

3. Application

Management PC

IP Network

UTP5 16
Network Switch
16 × Chassis UTP5

Fiber
Fiber
Fiber
Media Converter
Media Converter
Media Converter
User16

User1
User2

Figure1: Typical Application Topology of the Gigabit

Ethernet Media Converter

4. Specification

4.1. Ethernet Port

Fully compatible with IEEE802.3、IEEE802.3u、IEEE802.3ab
standards
z Data Rate: 10/100/1000Mbps auto-negotiation

z Half/full duplex mode auto-negotiation

- 5 -
 Gigabit Media Converter User Manual

z Connectors: RJ45 Jack

z Support automatic MDI/MDOI-X crossover

4.2. Fiber Optical Port

z Adopt standard 1×9pin optical transceiver module;

z Wavelength: 850nm, 1310nm on multi-mode,

1310nm,1550nm on single-mode;
z Up to 80Km transmission distance on single-mode;

z SC/PC, ST/PC and FC/PC are optional

z Double-strand, Single-strand and CWDM Optional

4.3. Power
z Power Input：

AC Power: 198V~242VAC, 50/60Hz

DC Power: -48VDC
z Power Consumption：<3W

4.4. Environment
z Operating

Temperature: 0~+50℃
Relative Humidity: 0~90% (non-condensing)
z Storage

Temperature: -25~+70℃
- 6 -
 Gigabit Media Converter User Manual

Relative Humidity: 0~95% (non-condensing)

4.5. Dimensions
z Dimensions:

Standalone:
132mm(width)×36mm(height)×122mm(depth)
19-inch Chassis:
440mm(width)×125mm(height)×250mm(depth)

- 7 -
 Gigabit Media Converter User Manual

5. Panel Instruction

5.1. Panel of Module

Optical Port

Ethernet Port

- 8 -
 Gigabit Media Converter User Manual

5.2. Front Panel of Standalone Device

Power Supply Ethernet Port Optical Port

5.3. Front Panel of Chassis

Manage Module 16×Gigabit Media Converter Module

- 9 -
 Gigabit Media Converter User Manual

5.4. Back Panel of Chassis

Power Supply Power Supply Radiator

5.5. LEDs’ Description

Table 1 LEDs
LED Function Color Status Description
Power On Power supply OK
PWR Green
Status Off No power supply
Optical On Optic port linked
Port
Flink Yellow
Link/Act Off Optical port not linked
Status
Full/Half On Full duplex mode
FDX Green
Duplex Off Half duplex mode
Tlink Twist-pair Yellow On Twist-pair port linked
port Twist-pair port is
Blink
Link/Act transferring data

- 10 -
 Gigabit Media Converter User Manual

Status Twist-pair port not

Off
linked
Twist-pair On Speed is1000Mbps
port
1000M Green Speed is 10Mbps or
speed Off
100Mbps
1000M
Twist-pair On Speed is 100Mbps
port
100M Green Speed is 1000Mbps or
speed Off
10Mbps
100M

6. Installation & Operation

6.1. Installation Steps

6.1.1. Preparation
z The standalone unit can be place on desktop or other

place, modules must be fix to chassis.

6.1.2. Connection
z Connect the fiber strand and twist-pair cable according to

the practical application environment;

6.1.3. Power ON
z Connect the power supply, the media converter will do the

- 11 -
 Gigabit Media Converter User Manual

self-test;
z After reset, if the line connects correctly, the LEDs PWR,

Tlink and Flink will be lit on. That means the twist-pair port
and fiber port connect normally, The 1000M is on while link
speed is 1000Mbps at twist-pair port, or 100M is on while
link speed is 100Mbps, or 1000M and 100M are both off
while link speed is 10Mbps;
z If OK, then the line is correctly connected;

z When transferring data, Tlink will blink.

6.2. Something Notice

z Check the device and accessories according to Packing List

when open the box. If something missing or damaged,

please contact us immediately.
z Please install and operate equipments according to the

instruction we provided. Equipments maybe damaged for

improper installation and operation.

6.3. Faults & Solutions

6.3.1. Power LED is off
Solution: Check-up the device whether the power cable if
connected correctly.

- 12 -
 Gigabit Media Converter User Manual

6.3.2. Tlink LED is off after power up

Solution:
(1) Check if the twist-pair cable is connected correctly.
(2) Check if the Ethernet device connected with the
connector if running normally.
6.3.3. Flink LED is off after power up
Solution:
(1) check if the fiber is connected correctly.
(2) failure connection of transmitting or receiving side may
lead to the Flink led off. So need to check if the TX or RX
connection of the fiber port is nomal.
6.3.4. Data transfer abnormally, including transferring
failure, data loss
Solution:
(1) Check if the transmit power of converter optical port is
normal;
(2) Be sure no single-mode fiber is connected with
multi-mode equipment.
(3) Check if it is used in pairs when single-strand converter is
used.

- 13 -
 Gigabit Media Converter User Manual

7. Order Information

7.1. part number of module or standalone media

converter
Note: X should be changed to 1 or 2. When X=1, it
means unmanaged converter. When X=2, it means
managed converter
P/N Description
Single mode, Distance: 20Km, 1310nm,
FX-S7022CA
SC, Standalone, 220VAC
Single mode, Distance: 20Km, 1310nm,
FX-S7022CD
SC, Standalone, -48VDC
Single mode, Distance: 20Km, 1310nm,
FX-S7082TM
ST, Module
Single mode, Distance: 20Km, 1310nm,
FX-S7042CM
SC, Module
Multimode, 850nm, ST, Standalone,
FX-M71CD
-48VDC
Single Strand, Distance: 20Km, 1310nm,
FX-W7042CA
SC, Standalone, 220VAC
Single Strand, Distance: 20Km, 1310nm,
FX-W7042CM
SC, Module
Above is the typical order information of 10/100/1000Mbps
Media converter. For more information, please contact us.

- 14 -
 Gigabit Media Converter User Manual

7.2. Part Number of Chassis

P/N Description
16-slot chassis, support double
FC-216
redundant power supplies
FC-216-M Management Card of the chassis

7.3. Part Number of Chassis power supply

module
P/N Description
16-slot chassis power supply module, AC
FP-2100A
220V input, 100Watt output
16-slot chassis power supply module, DC
FP-2100D
-48V input, 100Watt output

** We Reserve the right to vary descriptions and

specifications without notice due to Fibridge’s policy of

continuous product improvement**

- 15 -
 Gigabit Media Converter User Manual

Beijing Fibridge CO., LTD.

Address: A402, Power Creative Building, NO.1 Shangdi East
RD., Haidian District, Beijing
Tel: +86-10-58858988
Fax: +86-10-58858520
Email: [email protected]
Website: http://www.fibridge.com

- 16 -
Gigabit Media Converter User Manual

- 17 -