Tutoriais

Autodesk Inventor
Year 2023 Version 2022 Page 1/29

General objectives:
Use the 3D modeling tools: Extrude, Revolve, Chamfer, Fillet, Hole, Shell,
Rectangular Pattern, Circular Pattern, Shell, Sweep and Mirror;
Use representation of tapped holes;
Work in the 3D Sketch environment.

Define the following sketch:

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 2/29

Click or R to define a 360° profile revolution.

Click to define a radius of 2 mm on the indicated edge.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 3/29

Click to define a 2x45° chamfer on the indicated edge of the model.

To complete the exercise, click to save the model.

Exercise

Define the following sketch:

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 4/29

Click or E to define a 20 mm extrusion.

Click and select the indicated face of the model to define a new sketch.

Define the following sketch:

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 5/29

Click to define a 15 mm cut extrusion and a draft angle of -5°. Select the
option and method Distance.

On Advanced Properties set a slope angle of -5.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 6/29

Click to set a 2mm radius on the indicated edges of the model.

Click to define a radius of 1 mm on the indicated edges of the model.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 7/29

Click to define a Rectangular Pattern. Select the Features to copy (Extrude

and Fillet), in the graphics area or in the Browser Bar.

In Direction1, click and select a model edge that defines the copy direction of 2
elements 20 mm apart.

In Direction1, click and select a model edge that defines the copy direction of 4
elements at a distance of 18 mm.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 8/29

Click to set a constant thickness of 1 mm throughout the model. Under

Remove Faces, select the side and bottom faces to remove them.

Click to define a radius of 8 mm on the indicated edges of the model.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 9/29

To complete the exercise, click to save the model.

Exercise

Define the following sketch:

Click or E to define a 40 mm extrusion.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 10/29

Click to create a plan. Select the face to which you want to create the parallel
plane. Click with the left mouse button on the plane and drag it. Set a distance of 5
mm.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 11/29

Click and select the previous plane to define a new sketch.

Click and select the plan.

Define the following sketch:

Click or E to extrude the previous profile into the model. Select To Next mode.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 12/29

Click to create a plane that passes through the middle of the model.

Click and select the previous plane to define a new sketch. Define the
following sketch:

Click to define a point at the center of the previous shape.

Click to define a Rectangular Pattern. Select the previous Feature

(Extrude).

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 13/29

In Direction1, select and select the outer profile to define the copy direction.

Click on Spacing and select Curve Length mode.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 14/29

Click Start and select the previously defined sketch point.

In define 10 elements. In Orientation select Direction1.

Click to define a radius of 1 mm on the indicated edges of the model.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 15/29

Click to define a 2 mm chamfer on the edges of previously defined pins.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 16/29

To complete the exercise, click to save the model.

Exercise

Define the following sketch:

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 17/29

On a plane perpendicular to the plane of the previous sketch, define the next sketch.

Use the tool to ensure the match between the two sketches.

Close the previous sketch .

Click to extrude the section along the previous profile.

In Profile select the section. In Path select the path to follow.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 18/29

To complete the exercise, click to save the model.

Exercise

Define the following sketch:

Click or E to define an 8 mm extrusion.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 19/29

Click to create a plane that is parallel to the indicated face of the model by
minus 7 mm. Select the face and drag the plane outline in the desired direction to
define the distance.

Click and select the previous plane to define a new sketch.

Define the following sketch:

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 20/29

Click or E to define a 30 mm extrusion.

Click to define a radius of 1 mm on the indicated edges of the model.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 21/29

Click to create a plane that is parallel to the indicated face of the model and
passes through the midpoint of the selected edge.

Click and select the previous plane to define a new sketch.

Define the next sketch using the tool to project the indicated model edges
onto the new sketch.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 22/29

Close the previous sketch and click again and select the indicated face to
define a new sketch.

Define the following sketch:

Click to extrude the cylindrical section along the previous profile. In Profile
select the cylindrical section. In Path select the path to follow. Let's use the Parallel
option.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 23/29

On the indicated face, define the next sketch, use the tool to create a sketch
point.

Click to define an M5 threaded through hole at the previously defined

sketch point.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 24/29

Click to define a rectangular copy of the previous hole.

Define the following sketch on the indicated face of the model.

Click to define an M10 threaded hole, at the previously defined sketch

point, with a depth of 12 mm and a thread length of 10 mm.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 25/29

Click to define a radius of 1.5 mm on the indicated edges of the model.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 26/29

To complete the exercise, click to save the model.

Exercise

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 27/29

Right-click on the XY plane and the X axis and select the Visibility option.

Click and select the XY plane to define a new sketch.

Define the following sketch, using the tool to project the X axis so that it is
possible to dimension between the center of the circle and the axis.

Click to define the spiral shape.

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 28/29

Click and select the XY plane to define a new sketch.

Define the following sketch:

E-mail:[email protected]
 Tutoriais
Autodesk Inventor
Year 2023 Version 2022 Page 29/29

Click to define a cut extrusion through the entire model. Select the All option
and method.

E-mail:[email protected]