TASS GPS - The GPS tracker must be installed by professional person

GPS Vehicle Tracker User Manual

কিভাবে TASS GPS এ্যিটিভ িরবেন :

ধা঩ঃ১
সফ প্রথমভ
ব আ঩নায মভাফাইমর মসাপটওয়াযটট ইন্সটর করুন। www.tasslock.com/downloads

তায঩য জিপ঩ এস মথমকস টিক আইপিটট সপটওয়াময ফসান । রগইন করুন।

তায঩য ১০০% সটিক বামফ জিপ঩এমস পসভকািব স্থা঩ন করুন ।
তায ঩য খুফ সাফধামন জি প঩ এমসয কবায পপটটিং করুন, ৪ টট স্ক্র রাপগময় ওয়াটায঩ররুপ করুন।
তায ঩য মখারা আকাম঱য পনমে জি প঩এমস ঩াওয়ায প্লাগ করুন ।

ধা঩ঃ২
প্রথমভ জি প঩এমস একটট কর পদময় মেক করুন, মম করটট মামে পকনা । মপদ কর না মায় তাহমর পসভ কািব ফা
঩াওয়ায ঩ায়পন।

তায঩য, মসাফ্টওয়াময রগইন কময, Order এই পেহ্ন পিক করুন ।

তায঩য Setting Vibration Alarm এ পিক করুন । তায঩য Alarm Mode মথমক Call পসমরক্ট কময মসন্ড ফাটন পিক
করুন ।

ধা঩ঃ৩
SMS CODES --- (পনমনাক্ত মভমসি গুমরা জি প঩ এস পসমভ ঩ািান)

এখন মভাফইমরয মভমসি অ঩঱মন মান ।

এখন- প্রথভ এযিপভন মসট করুন : 710#0171XXXXXXX#

APN মসটকরুন :
802#INTERNET# (FOR ROBI SIM)
802#GPINTERNET# (FOR GRAMEEN SIM)

প্রাথকিি সেটিিং েিপন্ন হব া

সহল্প াইন- ০১৬৮১০৯০৯০৯
Always check reply for every SMS Sent

Mostly Used Functions

Description SMS Codes Reply
Engine Off 222# Oil is cut off !
Engine On 333# Oil is restore !
গাড়ির ইঞ্জিন বন্ধ করার ২ ড়িড়নট
APN Setup 802#INTERNET# apn setting ok !
Country Time Setting (Ex:BD) 801#E6# Time Zone ok !
LBS Location (Indoor Location) 666# You get Google link
Reset or Reboot 930# Reset System ok !
Delete everything on GPS 940# Factory, OK !
 TASS GPS - The GPS tracker must be installed by professional person

Set Admin Number

SMS Text Command SMS Example Sample
Admin 1 710#number# 710#018XXXXXXXX#
Admin 2 711#number# 711#018XXXXXXXX#
Admin 3 101#number# 101#018XXXXXXXX#
Admin 4 102#number# 102#081XXXXXXXX#
Admin 5 103#number# 103#018XXXXXXXX#
1) Admin number can control the oil, power and resume factory settings.
2) Admin number can receive the alarms call and text of vibration, over speeding, out geo-fence, etc
3) SIM must display the incoming call number to control oil and power.
4) Five numbers can be set as admin number.
5) Resend the command to change admin number.

Deleting Admin Number

SMS Text Command SMS Example Sample
Delete Admin 1 D01# D01#
Delete Admin 2 D02# D02#
Delete Admin 3 D11# D11#
Delete Admin 4 D12# D12#
Delete Admin 5 D13# D13#
Technicalparameter
1）.GSM：850/900/1800/1900 Quad band
2）.GPRS: Class12, TCP/IP
3）.Working Voltage：9~40V DC/ 9~100V 4）.Working current：≈22mA
(12vDC) 5）.Working current：≈12mA (24vDC)
6）.GPS locating timeCold start≈38s（Open sky）
Warm start≈32s
Hot start≈2s（Open sky） 7）.GPS Precision：5 ~10m（2D RM）
8）.Working temperature：-20℃～+70℃9）.Working humidity：20%～80%RH
10）.Measurement： 76(L)*27(W)*15(H) mm / 87(L)*43(W)*14(H) mm

2. Installation
2.1 Prepareinstallation
(1) ProductCheck.Openthepackingboxandcheckthe device„smodelandaccessories.
Ifthemodeliswrongortheaccessoriesnotcomplete,pleasecontactthedealer.
(2) ChooseSIMcard.Pleasetakedealer‟sadviceasreferencebeforeinsertSIMcard.
(3) SIMcardinstallation.OpenthedevicecoverandSIMcardholder.Theninsertthe
SIMcardandpushbackitsholder(asfollows).

(4) Putbackthefrontcoverandscrewitup.
(5) Connectthedevicetothe9-24Vpowersupply.（theredLEDconstantglow）
(6) Installthedeviceinthehiddenplaceofthecar；

TheSIMcardmustbewithGPRSfunction andenough credit.IfyourSIMcardneed

inputPINcodewhenpoweron,pleaserefertothemobilephoneusermanualtocancelit
 TASS GPS - The GPS tracker must be installed by professional person

2.2 Installation
The GPS tracker must be installed by professional person

(1) Please install the device in the hidden place asfollowings：

- Under Frontwindshield；
- In the front instrumentpanel；
- Under backwindshield；
(2) Avoid being placed with signal radiators like reverse sensor；
(3) Thedevicehasbuilt-inGSMandGPSantenna.Pleaseensurethe
receivingsideofthedeviceisfaceupandwithoutmetalcover.

Note：The metal cover will lessen the GPS signals receiving.

3.Device wiringrequirements
3.1 ThedevicepowersupplyisDC9-100V.Theredlineispositivepolewhilethe black line is negativepole.
3.2 Thenegativepoleofpowersupplyconnectswithgroundorthemetals.Please do not connect with other
groundlines.
3.3 Afterfinishedthepowersupplywireconnection,pleaseplugthepowersupply wire into thedevice.

Optional MIC and SOS wiring diagram

4.The DeviceWorking
4.1 Poweron:Thedevicewillbepoweredonwhendetectthecurrent.ThenthethreeLED
indicatorswilllightoncontinuously.Thedevicewilluploadthedatatotheonline
platform(Theuploadingdatadefaultintervalis10seconds).Whenthecaris
instaticstateforalongtime,thedevicewillswitchtoenergysavingmode.
4.2 PoweroffPulloffthepowerwiretopoweroffthedevice.
 TASS GPS - The GPS tracker must be installed by professional person

5. UserSettings

(1)Set Admin Number

SMSText Parameter Sample
Command
Add Number 710#number# 710#018XXXXXXXX#
711#number# 711#018XXXXXXXX#
Delete D01# D01#
Number D02# D02#
Adminnumbercancontroltheoil,powerandresume factorysettings
Admin number can receive the alarms call and text of vibration, over
Command speeding, out geo-fence,etc
Description SIMmustdisplaytheincomecallnumbertocontroloil andpower.
Only two numbers can be set as adminnumber.
Resend the command to change admin number.
Command Successful SettingAdd admin account 1 OK!
Feedback

(2) Check Admin Number

SMSText Parameter Sample
Command
Check 901# 901#018XXXXXXXX#
Command View the device admin number directly.
Description
Command Successful S et t in g ：Admin1:018XXXXXXXX,
Feedback Admin2:018XXXXXXXX

(3) Set Authorization Number

SMSText Parameter Sample
Command
Add Number 101#number# 102#number# 101#018XXXXXXXX#
103#number# 102#018XXXXXXXX#
103#018XXXXXXXX#
Delete Number D11# D12# D11# D12#
D13# D13#
Command AuthorizationNumberusedtocontroloilbySMS
Description OnlythreenumbercanbesetasauthorizationNumber
BeforechangetheauthorizationNumbershoulddelete
Previous number first.
Command Successful Setting：Add Authorization account 1 OK!
Feedback
 TASS GPS - The GPS tracker must be installed by professional person

(4) Check authorized number

SMSText Parameter Sample
Command
Check C10# C10#
Command Check the device authorization number directly.
Description
Command Feedback Successful SettingAuthorization1：018XXXXXXXX
Authorization2：12345678912
Authorization3：12345678913

(5)APN
Text Parameter Sample
command
APN Setting without 802#apn# 802#INTERNET#
password
802#username# password# 1：802#internet#123#123# 2:
APN Setting with 802#internet#
password
APN differs according to the local telecommunication
Command operators.
Description For example ： If APN request password， please refer to
Sample1, Sample 2 for no password.
Command Successful Setting：apn setting OK！
Feedback
 TASS GPS - The GPS tracker must be installed by professional person

(6) Set / View SERVER HOST

SMSText Parameter Sample
Command
SERVER HOST
Parameter 803#SERVER # port# 803#58.61.154.231#7018#
View CIP# 1）CIP#
SERVER
Command Change the IP and port when move to a new server port：
Description 10~65535. 1 is domain and 0 is IP；
SERVER Successful Setting：
The setting of HOST NAME is successful ! HOST: SERVER
Command Feedback PORT: 7018
CIP# Successful Setting： IP: 58.61.154.231
Port: 7018

(7) TIMMER (Set data uploading time interval while car is MOVING)
SMSText Parameter Sample
Command
TIMEER 730#uploading interval# 730#20#
setting
Command Time setting scope： 10~3600 seconds；
Description 20 means time interval, the default value is 15 seconds！
Command SuccessfulSetting：SetuploadmoveITV20seconds,OK！
Feedback

(8) Alert on/off

SMSText Parameter Sample
Command
Alert on 911# 911#
Command
Alert off 910# 910#
Command
Command Description This command is used to set the alert on/off, in case of unknown movement
orshake.
Command 911# Successful Setting：Defence setting, OK!
Feedback 910# Successful Setting：CancelDefence setting, OK!

(9) STATIC (Set data uploading time interval while car is STATIC)
SMSText Parameter Sample
Command
STATIC SUP# time interval# SUP#5#
Command Time scope ： 1~1440minutes ；The device has 3D
Description transmission and the default time interval is 5 minutes.
Command Successful Setting：Set upload still ITV 5 Mins, OK！
Feedback
 TASS GPS - The GPS tracker must be installed by professional person

(10) Cancel the continuous uploading

SMSText Parameter Sample
Command
NUP NUP# NUP#
Command Description This command is used to cancel sending data to the platform. If need to restore
the uploading, need to reset
TIMEER or STATIC Parameter
Command Successful Setting：Close upload gps information OK！
Feedback

(11) RELAY (Remote cut off fuel/power)

SMSText Parameter Sample
Command
RELAY 222# 222# cut off fuel and power
Parameter1
RELAY 333# 333# recover fuel and power
Parameter2
RELAY control the ON/OFF of the vehiclerelay;
Only admin number can set thisparameter.
Command Description Only cut off the oil circuit while vehicle driving speed below 20KM/H or in
staticstate.
When send the command, the vehicle speed is over 20KM/H, device will reply
“pleasewaiting”
Command 222# Successful Setting： Oil is cut off !
Feedback 333# Successful Setting： Oil is restore !

(12) GMT
SMSText Parameter Sample
Command
GMT 801#location, 801#E6#
time#
Command Description The default time zone is Beijing, China. If need change, please operate
according to the above command.
For Bangladeshi time use E6
Command Successful Setting: time zone ok!
Feedback

(13) VIBRATION
SMS Text Command Parameter Sample
VIBRATION Alarm 1)123#2#1#
Parameter 123#2#,alarming way# 2)123#2#2#
3)123#2#3#
Set the vibration alarm V123#1# V123#1#
time interval
Cancel vibration alarm 456# 456#
Vibration sensitivity level is from 1 to 5 ， 1 is the most sensitive
Command Description and 0 is close. Alarming ways:
1 calling, 2: text , 3: call and text .
Mustsettheadminnumberandreceivingnumber.
Successful Setting: shocksetting,OK!way:1
Command Feedback shock interval setting, 1 Mins, OK!
 TASS GPS - The GPS tracker must be installed by professional person

No shock setting, OK!

(14) OVER SPEED ALARM SETTING

SMSText Parameter Sample
Command
SPEED SSA#120# SSA#120#1#
Parameter alarming way#
Command Description Speed range: 60-220, if not inside this range, the
alarm off. Alarming way 1: call, 2: text , 3: call and text .
Must set the admin number and receiving number.
Command Successful Setting： Speeding Alarm setting，OK!
Feedback

(15) RESET
SMSText
Command Parameter Sample
RESET 930# 930#
Command
Description Reset the device
Command
Feedback Successful Setting：Reset system, ok!

(16)FACTORY RESTORE
SMSText Parameter Sample
Command
Parameter 940# 940#
Command Restore the factory setting, only admin number can set.
Description
Command Successful Setting：Factory, OK！
Feedback

(17) LANGUAGE SETTING

SMSText Parameter Sample
Command
LANG LANG1# LANG1#
Parameter LANG0# LANG0#
Command Set the language of command feedback, LANG1 is
Description Chinese, LANG 0 is English
Command Successful Setting：Set language, OK！
Feedback
(18) WHERE (Optional)
SMSText Parameter Sample
Command
WHERE 988# 988#
Command Checkthelongitudeandaltitudeandotherinformationof
Description the device
Command Reply with longitude and altitude, speed and IMEL.
Feedback
 TASS GPS - The GPS tracker must be installed by professional person

(19) URL
SMSText Parameter Sample
Command
WHERE 666# 666#
Command Check the location link of Google map
Description
GPS!Lat:22.66349 long:114.22066, speed:000.0 T:04/19/19 13:47
Command Feedback Location URL:
http://maps.google.com/maps?q=N22.540885,E113.95265
(20) PARAM (Device details)
SMSText Parameter Sample
Command
PARAM 886# 886#
Command The command is to check the settings or the default
Description parameter.
IMEI:351190012535936
APN : INTERNET
IP: 58.61.154.231
Command Feedback PORT: 7018
LANGUAGE: English TIMEZONE: E8 NUMBER INFOR SOS: 13500135000
ADMIN1: 13500135000
ALARM WAY: 1
BAT VOL: 12.73V

(21) STATUS
SMSText Parameter Sample
Command
STATUS 902# 902#
Command Designed for checking the device‟s working status.
Description
IMEI: 353327022096317
Basicinformation
VERSION: 61M-Q3_T3-HS-SLW-XY_V2.6_190402 RSSI_LEVEL:83
APN: INTERNET
IP: 58.61.154.231
PORT: 7018 PROTOCOL: TCP/IP
Command Feedback GPS information
GPS moving report intervals: 20sec static report intervals: 5min
GPS :UNFIXED
GPS Satellites:0

NUMBER INFOR SOS : 018XXXXXXXX

ADMIN1: 018XXXXXXXX
ALARM WAY: 3
BAT VOL: 12.73 V

6.Troubleshooting
6.1 Thedeviceisunusedorofflineonthewebserverplatform
8.1.1 First,pleasecheckthethreeLEDworkingstate.Ifpossible,call the device‟s SIM card number tocheck:
①Ifthecallcannotconnecttodeviceandfeedbackthedeviceisnot in the GSM service area, please get the
GSM signalfirst.
②If reminding the device SIM card is out of fee, please top up the SIM card.
③Ifcallingcanconnecttodevice,meanstheSIMcardstillhavefeeinside, please check with the SIM card
 TASS GPS - The GPS tracker must be installed by professional person

operator that the GPRS function has been opened ornot.

④Ifthecallcannotconnecttodeviceandfeedbackthedevicewas poweredoff,pleasetakethe
Devicebacktoanalysisasbelow:
a) IftheRedLEDandblueGSMLEDaresolidlighton,pleasecheckthe installationstatusofSIMcard,ifinstallation
noproblem,change a new SIM card toretest.
b) If the Red LED is off, please check the power terminal wiring is disconnected or the power line end
fuse is blown. Also can use a multimetertomeasurethevoltageofthemainpower2Pconnector.If
thevoltageisnormal,pleasesendthedevicetothefactoryforrepair.

8.1.2 Pleasecheckthereishowmanyofflinedevicesinthesamearea,in
ordertojudgewhetheritstheSIMCardoperator‟snetworkproblemor not.

8.2 When GPS cannot receive the signals, please drive to aopen sky
place,andensurethereisnometalcoveronthedevice.

8.3 WhenthedevicecannotreceivetheGSMsignal,pleasechecktheSIM
cardinstallation.IftheGSMsignalscannotreachyourlocation(suchas
thebasement),pleasedrivetoaopenskyplace.

8.4 TheredLEDcannotpoweron.Checkfuse,ifitsbroken,pleasereplace thefuse.

 TASS GPS - The GPS tracker must be installed by professional person

Remote control User Manual

Lock

Unlock

Ignition Remote buttons

Finder

This is semi-automatic lock sensor. After ACC off the bike engine
will lock instantly automatic.

Lock Button: press once and bike will lock with alarm.
Press and hold for 2 seconds. Indicator will flash without sound.
And bike will lock without alarm.
Unlock Button: Press once and bike will unlock with sound, also
engine will be locked if engine was started.
Press and hold unlock button for 2 seconds, bike will unlock without
sound and engine will be locked without any sound (If engine was
started)
Ignition Button: Without pressing ignition button bike will never
start. Press once the ignition button after turn on the key, bike can
be started (You will hear a long sound).
Press twice ignition button bike will be automatic ignition on without
the main key. Now you can start the bike without main key.
Finder button: If you cannot find your motorbike in very crowd
place. Press the finder button. And bike indicator will flash 5 times
and alarm will beep 5 times. You can find your bike.
Combination of buttons:
Turn on Indicator Beep: Turn of bike key, now press and hold
ignition button and press unlock 3 times.
Turn off Indicator Beep:Turn of bike key, now press and hold
ignition button and press unlock 4 times.
 TASS GPS - The GPS tracker must be installed by professional person

Sensitivity Control:Turn of bike key, nowpress and hold ignition

button and press lock1 time. You can hear a beep. Press lock 2
times, you will hear 2 beeps. This way you can control the sensitivity
modes. 5 beeps are most sensitive.
Lock the motorbike while running with alarm: When running the
bike, just press the lock button of remote within the range, and bike
will be locked with alarm.
Lock the motorbike while running without alarm: While running
motorbike, press and hold the unlock button for 3 seconds, and the
bike will be locked without any sound.
Factory reset: Turn on the bike key, Press and hold ignition key and
press lock button 15 times. You will hear music. That’s mean the
remote system is now default factory reset.
We provide 2 remotes, if one lost or broken, you can use the backup
one.

Thank you for choosing TASS GPS

Please email us if any problem – [email protected]
Chatting: www.facebook.com/TASSLOCK
Call: +8801681090909
www.tasslock.com
Dhaka, Bangladesh