En Prima Led Ex Data Sheet
En Prima Led Ex Data Sheet
USE ADVANTAGES
The light fitting is suitable for the environment • Light fitting protection IP66 •S tandard model - CRI > 80: 4000 K
with a danger of explosion of gas, dust and • Maximum ambient temperature up to ta = 60°C •A t request CRI > 80: 3000 K, 5000 K, 6500 K
combustible fumes. The light fittings meet the • Lifetime: 50,000 hours / L90B10 • Clips: stainless steel + polyamide + 15 %
requirements of Government Decree 116/2016 • Diffuser: translucent polycarbonate (PC) = high glass fibre
Coll. and European Community Directive mechanical resistance • Through-wiring of up to 10 wires at body
No.2014/34/EU. • Body: grey polycarbonate (PC) = high mechani- • At request also versions according to the stand-
cal resistance ard for EAC states (Russia, Kazakhstan, Bela-
The light fitting is certified for the environment: • Up to 45 % lower electricity consumption when rus, Armenia)
II 3G Ex nR IIC T6 Gc compared to fluorescent tubes • Certification: CB, TÜV CY 22 ATEX 0206610 X Is-
II 3D Ex tc IIIC T70°C Dc
• Current driver with the possibility of constant sue: 02
luminous flux for whole lifetime (CLO)
The basic requirements for safety and health pro-
tection are secured by the verification of conformity • Constant luminous flux even in ambient tem-
with the standards according to ČSN EN 60079-15, perature of -25 °C
ČSN EN 60079-0 and ČSN EN 60079-31.
208
PRIMA LED Ex PCc
A
D 145 120° 120° 120° 120°
111
100
60° 60°
C0 60° 60°
C90
30° 0° 30° 30° 0° 30°
14810 PRIMA LED Ex 1.4ft PCc 3200/840 = suitable replacement for PRIMA Ex 136 PCc E – 1 × 36 W
14830 PRIMA LED Ex 1.5ft PCc 4000/840 = suitable replacement for PRIMA Ex 158 PCc E – 1 × 58 W
14850 PRIMA LED Ex 2.4ft PCc 6400/840 = suitable replacement for PRIMA Ex 236 PCc E – 2 × 36 W
14870 PRIMA LED Ex 2.5ft PCc 8000/840 = suitable replacement for PRIMA Ex 258 PCc E – 2 × 58 W
Energy consumption of Mxh increased by 3 W until battery fully charged (max. 24 hours).
PRIMA LED Ex PCc DALI Digital dimmable driver DALI - stainless clips (c)
LEGEND
1F 1-phase 3 core through-wiring in the luminaire DALI version with digital dimmable driver DALI
3F 3-phase 5 core through-wiring in the luminaire DALI 1F 1-phase 5 core through-wiring in the luminaire
M1h emergency back-up source with 1 hour operating time for maintained emergency illumination DALI 3F 3-phase 7 core through-wiring in the luminaire
M3h emergency back-up source with 3 hour operating time for maintained emergency illumination DALI 3F Mxh 3-phase 7 core through-wiring in the luminaire
3F Mxh 3-phase 5 core through-wiring in the luminaire (L3 used for emergency unit unswitched power supply)
(L3 used for emergency unit unswitched power supply)
210