Scribd
Upload
6 views1 page

PHARMASAFE AsisgnEnrolledKey

Cabinet

Uploaded by

JiThiN vP
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
6 views1 page

PHARMASAFE AsisgnEnrolledKey

Cabinet

Uploaded by

JiThiN vP
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

®

Assigning a pre-enrolled key to another employee:


Note: The following procedure requires the RED “Manager” or BLACK “Factory” ”, #13 Admin, #14
Audit, or #21 Super key.
• Present the key to the reader, wait for prompt to enter the 6 digit P.I.N. (Personal Identification
Number), Enter the 6 digit P.I.N. and press ENTER.
The screen will display Wait……writing to backup Database…then change to the next screen

SafeWizard Main Menu Press #3


1 Doors to select.
2 Deposits There will be a blinking cursor under the first letter of the
3 Administration previous name on the second line. Begin entering the name
4 Audits of the new person. Each letter entry will overwrite an
Quit To Cancel existing letter.
Writing a name to the key is very similar to a cell phone.
Press the correct number key with letters shown until the
desired letter appears, then press NEXT to advance one
1 Set Up Users space to the right.
2 Set Up Access Control Press #1 Note: If you advance past an unwanted letter, press the
3 Set Date and Time to select. “BACK” key and press the “0 – SPACE” key to remove,
4 Set Up Factory then a different letter may be inserted. After writing the
5 Change Your PIN name, press Enter (9) times. The screen shown below will
Quit appear.

New User No. XXXXX


Set Up Users
1 Add A New User I/O MGR Joe Green
2 Modify User Profile
3 Delete A User Press #2
4 Enable / Disable User to select. Present User’s Key
5 Display User List
6 Print User List Now present the key being assigned to write the new
7 Purge All Users information. Hold the key until the screen changes
from the “Writing To Database” message and
returns to the “Set Up Users” screen.

Select User To Modify Press the “NEXT”


key to advance to Next select #2 Modify User Profile. Press the NEXT
the key that will be key to locate the same key, ….remember that you
XX have changed the name.
I/O MGR Bob Smith assigned, then
press “ENTER” to Press ENTER , press NO to Do You Want To
select. Change Modes?
BACK – NEXT User Press the “DOWN” key to move to the PIN Code line.
ENTER to Select For example,
advance to the The information will change to YES Key: Pin to
OUIT to Cancel 1 1 1 1 1 1.
key I/O Mgr. or
ACCNT EXEC Press “YES” to accept resetting the PIN to a
and press temporary number of (6) 1’s.
“ENTER”. Upon using the key the first time, enter the temporary
The next screen PIN of 1 1 1 1 1 1, press “ENTER”.
will ask “Do You You will be notified that the temporary PIN has
Want To Change expired press “ENTER” to enter a new 6-digit PIN.
Modes? Press “ENTER” to accept the new number. You will
Press “NO”. be asked to enter the same number a second time to
confirm.
Do not use repeating or consecutive numbers. If the
new PIN is accepted, the screen will change to the
“MAIN MENU” screen.

You might also like