Scribd
Upload
31 views2 pages

User Manual Tsl-b16

Uploaded by

alphanetsom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
31 views2 pages

User Manual Tsl-b16

Uploaded by

alphanetsom
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

JAMMER USER’S MANUAL A16 Version 1.

Being familiar immediately

Thank you for you using this jammer, Now, let me


introduce and make you have better understanding
about the positions of all the buttons, function of
accessories and other hardware。

Left side elevation

1: Cooling fan Cooling fan


1 2 3 4
2: DC 12V IN Power Jack
3: Working LED Indicator Light
4: Power Switch
Right side elevation

1 5

TOP side elevation


.
5: Adjust Power Switch
6: Channel No.1-16
7: SMA Connect With Antennas

6 7
Open the packaging and Starting use
Carefully open the packaging box and reserve it, In order to load or ship in the
future.
Please check whether all the things are kept in good condition or not. If you
encounter the bad condition of the elements or being damaged, please contact with
your dealer immediately.

- 1 -
JAMMER USER’S MANUAL A16 Version 1.1

Connecting system
Please connect the antenna according to the channel number
After connecting all of the subassemblies, please connect one
side (DC) of power supply wire into the device's power port,
and connect the other side to the power supply jack.

Turning on your jammer


After connecting all of the surrounding elements and tie wires, please press the
switch of left side to ON then the jammer will be working normally. The power pilot
lamp will be green

DC12V Power Jack Pilot Lamp ON or OFF

Adjustable Switcher
◎ Finding the adjustable switch of system's to adjust
each bands RF power output level or turn off without
influencing the other bands operation

Turning off your jammer

◎ Finding the switch of system's main-power supply on the system's left side
faceplate and turning it off.

Notices

◎ Before linking all the antenna, power supply shall not be switched on at first.
Non-taking off antenna when the mainframe is in the working condition.
◎ The jammer shall be installed in the position with good ventilation. When use the
jammer outdoors, preventing water shall be taken into
consideration.
◎ Antenna shall be used vertical to the ground.
◎ If you used in car, make sure connect to the
correct “+” or “ –” port of DC12V battery The Minimum
output power of storage battery more than 300Watt.

- 2 -

You might also like