Scribd
Upload
8 views5 pages

Geometry Sectional Area Bending: H (MM) B (MM) T (MM) T (MM) H (MM) R (MM) D (MM) A (CM) I (CM) I (CM) I (CM) I (MM)

Uploaded by

ysrwhhxfkd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views5 pages

Geometry Sectional Area Bending: H (MM) B (MM) T (MM) T (MM) H (MM) R (MM) D (MM) A (CM) I (CM) I (CM) I (CM) I (MM)

Uploaded by

ysrwhhxfkd
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

HEB

 DIN 1025-2:1995-11; Euronorm 53-62


 --

HEB b

Wide I-Beams with Parallel Surfaces


r1

tf
h
y
tw

Sectional
Geometry Bending
Area

h b tw tf hi r1 d A Iy Iz Ip iy
Section
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [cm2] [cm4] [cm4] [cm4] [mm]

HEB 180 180.0 180.0 8.5 14.0 152.0 15.0 122.0 65.25 3831.00 1363.00 5194.00 76.6

Bending Shear Torsion Warping

iz ip max Sy max Sz Wy Wz Ay Az It It,s Wt max ω


Section
[mm] [mm] [cm3] [cm3] [cm3] [cm3] [cm2] [cm2] [cm4] [cm4] [cm3] [cm2]

HEB 180 45.7 89.2 240.70 56.80 425.70 151.40 42.21 12.96 42.24 2774.07 30.17 74.70

1/5
Warping Stability Plasticity

Iω iω Wω max Sω c/tf c/tw Wpl,y Wpl,z Wpl,ω Wpl,y,webs Wpl,z,flanges αpl,y


Section
[cm6] [mm] [cm4] [cm4] [--] [--] [cm3] [cm3] [cm4] [cm3] [cm3] [--]

HEB 180 91728.00 42.0 1227.95 470.61 5.050 14.400 481.53 231.01 1882.44 49.10 226.80 1.131

2/5
Plasticity Other

αpl,z αpl,ω Apl,y Apl,z Npl Vpl,y Vpl,z Mpl,y Mpl,z Nu G Am


Section
[--] [--] [cm2] [cm2] [kN] [kN] [kN] [kNm] [kNm] [kN] [kg/m] [m2/m]

HEB 180 1.526 1.500 50.40 14.11 1533.675 683.814 191.441 113.16 54.29 1533.675 51.2 1.037

3/5
Other

V Am/V Aw d0 w
Section
[cm3/m] [1/m] [cm2] [mm] [mm]

HEB 180 6525.00 158.927 12.92 30.0 100.0

4/5
5/5

You might also like